Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface additives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Tensile and Microstructure Characterization of SNS Target Swirl Bubblers Fabricated by Additive Manufacturing

During operation the mercury facing surfaces of the Spallation Neutron Source target vessel are damaged by cavitation-induced erosion. One option to decrease the erosion damage to the SNS target vessel surfaces is to decrease the intensity of the pressure waves using small bubble mitigation. Injection of small diameter helium bubbles into mercury has been shown in decrease the intensity of proton-induced pressure waves and mitigate erosion damage to mercury/container interface surfaces. Several bubbler designs have been evaluated for implementation in the SNS target. One promising bubbler design is called a swirl bubbler, which is capable of producing a high density of very small diameter helium bubbles in flowing mercury. Due to the complexity of the swirl bubbler design and the geometric restrictions of conventional machining processes, additive manufacturing was considered for fabrication. But there was uncertainty with the mechanical properties of bubblers fabricated with additive manufacturing. A series of experiments were designed to characterize the tensile properties and microstructure of swirl bubblers fabricated using selective laser melting (SLM), both before and after consolidation via hot isostatic pressing (HIPing). This report summarizes the tensile and microstructural characterization of HIPed and non-HIPed swirl bubblers produced via the SLM process. The results show that the as-fabricated material contained appreciable porosity, lack-of-fusion defects, and inconsistent tensile properties with essentially zero ductility. But after a HIPing treatment the microstructure became fully consolidated, and the tensile properties surpassed the requirements specified in the material standard for steel-mill produced 316L plate material used to fabricate the SNS target vessel. While further testing is recommended to evaluate the material’s susceptibility to fatigue fracture, these results indicate 316L bubbler assemblies produced SLM and HIPed are promising candidates for implementation in a future SNS target module.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Accelerating fields up to 49 MV/m in TESLA-shape superconducting RF niobium cavities via 75C vacuum bake

In this paper we present the discovery of a new surface treatment applied to superconducting radio frequency (SRF) niobium cavities, leading to unprecedented accelerating fields of 49 MV/m in TESLA-shaped cavities, in continuous wave (CW); the corresponding peak magnetic fields are the highest ever measured in CW, about 210 mT. For TESLA-shape cavities the maximum quench field ever achieved was ~45 MV/m - reached very rarely- with most typical values being below 40 MV/m. These values are reached for niobium surfaces treated with electropolishing followed by the so called mild bake, a 120C vacuum bake (for 48 hours for fine grain and 24 hours for large grain surfaces). We discover that the addition during the mild bake of a step at 75C for few hours, before the 120C, increases systematically the quench fields up to unprecedented values of 49 MV/m. The significance of the result lays not only in the relative improvement, but in the proof that niobium surfaces can sustain and exceed CW radio frequency magnetic fields much larger than Hc1, pointing to an extrinsic nature of the current field limitations, and therefore to the potential to reach accelerating fields well beyond the current state of the art.

43 PARTICLE ACCELERATORS↗
NASA NTRS2002

Stability and Heat Transfer Characteristics of Condensing Films

The overall objective of this research is to investigate the fundamental physics of film condensation in reduced gravity. The condensation of vapor on a cool surface is important in many engineering problems,including spacecraft thermal control and also the behavior of condensate films that may form on the interior surfaces of spacecraft. To examine the effects of body force on condensing films, two different geometries have been tested in the laboratory: (1) a stabilizing gravitational body force (+1g, or condensing surface facing 'upwards') and (2) de-stabilizing gravitational body force (-1g, or 'downwards'). For each geometry, different fluid configurations are employed to help isolate the fluid mechanical and thermal mechanisms operative in condensing films. The fluid configurations are (a) a condensing film, and (b) a non-condensing film with film growth by mass addition by through the plate surface. Condensation experiments are conducted in a test cell containing a cooled copper or brass plate with an exposed diameter of 12.7 cm. The metal surface is polished to allow for double-pass shadowgraph imaging, and the test surface is instrumented with imbedded heat transfer gauges and thermocouples. Representative shadowgraph images of a condensing, unstable (-1g) n-pentane film are shown. The interfacial disturbances associated with the de-stabilizing body force leading to droplet formation and break-off can be clearly seen. The heat transfer coefficient associated with the condensing film is shown. The heat transfer coefficient is seen to initially decrease, consistent with the increased thermal resistance due to layer growth. For sufficiently long time, a steady value of heat transfer is observed, accompanied by continuous droplet formation and break-off. The non-condensing cell consists of a stack of thin stainless steel disks 10 cm in diameter mounted in a brass enclosure. The disks are perforated with a regular pattern of 361 holes each 0.25 mm in diameter. Non-condensing experiments in -1g have employed 50 cSt and 125 cSt silicone oil pumped through the perforated disks at a specified rate by a syringe micropump. The time to droplet break-off and the disturbance wavelengths appear to decrease with increasing pumping rate. The ability to reliably perform multi-point, ultrasonic measurements of the film thickness has been demonstrated. A linear array of eight transducers of 6 mm diameter (with a beam footprint of comparable size) are pulsed with a square-wave signal at a frequency of 5 MHz and a pulse duration of approximately 0.3 s. For thin films (60 m to 2-3 mm in thickness) the layer thickness is determined by frequency analysis, where the received ultrasound pulse is Fourier transformed and the spacing between the peaks in the frequency spectrum is analyzed. For thicker layers (up to at least 1 cm in thickness), time-domain analysis is performed of the received ultrasound pulses to generate directly the layer thickness. A time-trace of the film thickness at a point using a single transducer in the linear array is shown for the case of an unstable (-1g) n-pentane film. The oscillations in film thickness are evidently due to the passage and/or shedding of droplets from the cooled plate surface. The entire transducer array was used to measure the changes in film thickness resulting from the passage of gravity waves generated either by an oscillating wall or the impact of a single droplet on the free surface of a film. The enclosure in both cases was 14 cm square and the transducer spacing was 12 mm. Best results were obtained using as test fluid a mixture of 50% glycerol and 50% water with a fluid layer thickness of 3-5 mm. In both cases the measured wavelengths and wave propagation speeds using the ultrasound technique compared reasonably well with those observed by optical imaging. Additional information can be found in the original extended abstract.

Hermanson, J. C.↗
NASA NTRSDate not supplied

Full Lunar Surface Visualization and Simulation Platform

This paper reports the results of the innovative work completed to facilitate the creation of a lunar surface visualization and simulation platform for the entire surface of the moon as a design, test, training, verification, and mission support environment. The mathematical approach to the visualization of the data sets utilizes fractal mathematics to generate not only the highest possible detail that the Lunar Reconnaissance Orbiter (LRO) data can provide, but it also additionally supplies an estimation of surface reflectivity and lighting based upon location on the lunar surface. This level of detail and accuracy is required to conduct accurate integrated crew / vehicle risk assessment throughout the design-to-disposal life cycle of vehicles and their supporting procedures and mission priorities. This process starts with safety assessments of integrated hardware / software / crew/ and support environments. Unlike the Apollo Program, the Artemis Program is not risk tolerant.

Simulation↗
DOE OSTI2026

Investigation of the Surface Chemistry of Magnesium and Magnesium Alloy Powders

Magnesium (Mg) and Mg alloy powders are generally difficult to sinter at atmospheric pressure in inert atmospheres purportedly due to the presence of powder particle surface oxide layers. To better understand sintering of Mg and Mg alloy powders, x-ray photoelectron spectroscopy (XPS) was performed to characterize the surface chemistry of gas atomized pure Mg and Mg alloys AZ91D and WE43 powders. These results are used to quantitatively determine the surface chemistry of these powders. Additionally, equilibrium thermodynamic modeling of these Mg/Mg alloys materials exposed to oxygen down to part per billion concentrations are presented for relative comparison to experimental XPS results. Analysis of these results are intended to improve sintering of Mg and Mg alloy powder materials through more quantitative knowledge of powder surface chemistry.

25 ENERGY STORAGE↗
DOE OSTI2019

Free-Surface Variational Principle for an Incompressible Fluid with Odd Viscosity

We present variational and Hamiltonian formulations of incompressible fluid dynamics with a free surface and nonvanishing odd viscosity. We show that within the variational principle the odd viscosity contribution corresponds to geometric boundary terms. These boundary terms modify Zakharov’s Poisson brackets and lead to a new type of boundary dynamics. The modified boundary conditions have a natural geometric interpretation describing an additional pressure at the free surface proportional to the angular velocity of the surface itself. These boundary conditions are believed to be universal since the proposed hydrodynamic action is fully determined by the symmetries of the system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Entropic and Enthalpic Effects in Thin Film Blends of Homopolymers and Bottlebrush Polymers

We present a combined experimental and computational study of surface segregation in thin films of nearly athermal blends of linear and bottlebrush polymers. The lengths of bottlebrush backbone (N b ), bottlebrush side chain (N sc ), and linear polystyrene host (N m ) are systematically varied to examine the effects of polymer architecture on phase behavior. From the experiments, combinations of architectural parameters are identified that produce enrichment and depletion of bottlebrush at the polymer–air interface. These surface segregation behaviors are consistent with entropy-dominated thermodynamics. In addition, the experiments reveal conditions where bottlebrush and linear polymers are equally preferred at the surface. Simulations based on the self-consistent field theory (SCFT) qualitatively capture the three types of surface segregation behaviors and highlight the delicate interplay of entropic and enthalpic effects. Finally, our investigations demonstrate that controlling both entropic and enthalpic driving forces is critical for the design of surface-active bottlebrush polymer additives.

36 MATERIALS SCIENCE↗
DOE OSTI2017

The G4Foam Experiment: Global climate impacts of regional ocean albedo modification

Reducing insolation has been proposed as a geoengineering response to global warming. Here we present the results of climate model simulations of a unique Geoengineering Model Intercomparison Project Testbed experiment to investigate the benefits and risks of a scheme that would brighten certain oceanic regions. The National Center for Atmospheric Research CESM CAM4-Chem global climate model was modified to simulate a scheme in which the albedo of the ocean surface is increased over the subtropical ocean gyres in the Southern Hemisphere. In theory, this could be accomplished using a stable, nondispersive foam, comprised of tiny, highly reflective microbubbles. Such a foam has been developed under idealized conditions, although deployment at a large scale is presently infeasible. We conducted three ensemble members of a simulation (G4Foam) from 2020 through to 2069 in which the albedo of the ocean surface is set to 0.15 (an increase of 150%) over the three subtropical ocean gyres in the Southern Hemisphere, against a background of the RCP6.0 (representative concentration pathway resulting in +6Wm -2 radiative forcing by 2100) scenario. After 2069, geoengineering is ceased, and the simulation is run for an additional 20 years. Global mean surface temperature in G4Foam is 0.6 K lower than RCP6.0, with statistically significant cooling relative to RCP6.0 south of 30°N. There is an increase in rainfall over land, most pronouncedly in the tropics during the June–July–August season, relative to both G4SSA (specified stratospheric aerosols) and RCP6.0. Heavily populated and highly cultivated regions throughout the tropics, including the Sahel, southern Asia, the Maritime Continent, Central America, and much of the Amazon experience a statistically significant increase in precipitation minus evaporation. The temperature response to the relatively modest global average forcing of -1.5 W m -2 is amplified through a series of positive cloud feedbacks, in which more shortwave radiation is reflected. Finally, the precipitation response is primarily the result of the intensification of the southern Hadley cell, as its mean position migrates northward and away from the Equator in response to the asymmetric cooling.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Exact-Factorization-Based Surface Hopping for Multistate Dynamics

A surface-hopping algorithm recently derived from the exact factorization approach, SHXF, introduces an additional term in the electronic equation of surface hopping that couples electronic states through the quantum momentum. Furthermore, this term not only provides a first-principles description of decoherence, but here we show it is crucial to accurately capture nonadiabatic dynamics when more than two states are occupied at any given time. Using a vibronic coupling model of the uracil cation, we show that the lack of this term in traditional surface-hopping methods, including those with decoherence corrections, leads to failure to predict the dynamics through a three-state intersection, while SHXF performs similarly to the multiconfiguration time-dependent Hartree quantum dynamics benchmark.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Dual-Responsive Macromolecular Surfaces with Binary Patterns

The development of nanopatterned interfaces incorporating multiple stimuli-responsive polymers has great potential for advancing smart sensors and molecular capture devices, yet it remains challenging due to limitations in patterning techniques and “grafting from” methods. Here, we present a binary-patterned surface featuring honeycomb-shaped photothermal polypyrrole (PPy) and thermally responsive poly(ethylene glycol methyl ether acrylate-co-poly(ethylene glycol) methyl ether acrylate) [poly(EGMEA-co-PEGMEA)] brushes within the cavities, fabricated using colloidal lithography and surface-initiated photoinduced electron transfer-reversible addition–fragmentation chain transfer (SI-PET-RAFT) polymerization. The morphology of the surface can be precisely tuned by adjusting the height of each domain. This design integrates unique topographical features with the stimuli-responsiveness of the polymer, enabling the collapse of the copolymer brushes through direct heating or photothermal conversion of PPy under near-IR light. In conclusion, this innovative system offers potential capture-release functionality, providing versatility for diverse applications and enhancing adaptability across different functional scenarios.

Copolymers↗
DOE OSTI2018

Mechanistic Insights into the Synthesis of Higher Alcohols from Syngas on CuCo Alloys

Synthesis gas (CO + H 2 ) conversion is an important process in the transformation of coal, natural gas, or biomass into higher-value products. The explicit conversion into C 2+ oxygenates on transition-metal-based catalysts suffers from a low selectivity, being a consequence of an imperative integration of C–O bond splitting and C–C coupling reactions. Recently, it has been demonstrated that a bimetallic CuCo catalyst has high higher alcohol selectivity under mild reaction conditions, but the details of the reaction mechanism on the surface are still elusive. In this work, we studied the formation of methane, methanol, and ethanol from syngas on a close-packed (111) and a stepped (211) CuCo surface combining density functional theory (DFT) and microkinetic modeling. We found the CuCo alloy to be a promising candidate catalyst, displaying the required coverage of CO and CH x on the surface to facilitate C–C coupling. In addition, we found the selectivity to be very structure sensitive: the CuCo (211) surface is selective toward ethanol under certain reaction conditions, while the (111) surface is selective toward methanol. As a result, we identified the much lower C–O dissociation barrier and the higher rate of CH x –CO coupling as the reason for the high activity and selectivity toward ethanol on the (211) surface.

36 MATERIALS SCIENCE↗
NASA NTRS1991

The derivation of cloud parameters from satellite-measured radiances for use in surface radiation calculations

A simple scheme is developed for calculating the cloud amount, optical thickness, and height from satellite-measured radiances and is applied to the International Satellite Cloud Climatology Project B3 radiance data to compute the surface radiative fluxes over the tropical and subtropical western Pacific regions for July 1983, using a radiative transfer model. Results are presented on the sensitivity of surface radiation to the cloud scheme. In addition, the validity of an empirical relationship between the solar fluxes at the surface and at the top of the atmosphere is examined.

Chou, Ming-Dah↗
NASA NTRS1990

Climatological stratospheric modeling

The Goddard Institute for Space Studies (GISS) Three dimensional Global Climate/Middle Atmosphere Model was used to investigate the effect of doubled carbon dioxide on the middle atmosphere. Carbon dioxide was doubled in both the troposphere and stratosphere, and the sea surface temperatures were increased in accordance with results from the GISS climate model. Additional experiments were run with different sea surface temperature distributions, and doubling the carbon dioxide only in the troposphere or stratosphere.

Rind, David↗
DOE OSTI2020

Green synthesis of reduced Ti 3 C 2 T x MXene nanosheets with enhanced conductivity, oxidation stability, and SERS activity

Transition metal carbides (MXenes) are an emerging family of highly conductive two-dimensional materials with additional functional properties introduced by surface terminations. Further modification of the surface terminations makes MXenes even more appealing for practical applications. Herein, we report a facile and environmentally benign synthesis of reduced Ti 3 C 2 T x MXene (r-Ti 3 C 2 T x ) via a simple treatment with L-ascorbic acid at room temperature. r-Ti 3 C 2 T x shows a six-fold increase in electrical conductivity, from 471 ± 49 for regular Ti 3 C 2 T x to 2819 ± 306 S m -1 for the reduced version. Additionally, we show an enhanced oxidation stability of r-Ti 3 C 2 T x as compared to regular Ti 3 C 2 T x . An examination of the surface-enhanced Raman scattering (SERS) activity reveals that the SERS enhancement factor of r-Ti 3 C 2 T x is an order of magnitude higher than that of regular Ti 3 C 2 T x . The improved SERS activity of r-Ti 3 C 2 T x is attributed to the charge transfer interaction between the MXene surface and probe molecules, re-enforced by an increased electronic density of states (DOS) at the Fermi level of r-Ti 3 C 2 T x . The findings of this study suggest that reduced MXene could be a superior choice over regular MXene, especially for the applications that employ high electronic conductivity, such as electrode materials for batteries and supercapacitors, photodetectors, and SERS-based sensors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Fabrication of Piezoelectric Polymer and Metal–Organic Framework Composite Thin Films Using Solution Shearing

Polymer-metal–organic framework (polymer-MOF) composites have garnered significant interest as polymers can enhance the processability and industrial applicability of MOFs. Thin films of these composites are particularly attractive for applications in sensing, separations, and flexible electronics. Solution shearing, a meniscus-guided coating technique, has emerged as a scalable process for fabricating thin films of MOFs, and can produce large-area films within minutes. In this study, we utilized solution shearing to fabricate composite thin films of a MOF UiO-66 and a piezoelectric polymer poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)), investigating how polymer concentration during MOF synthesis and composite formation influences thin film properties, including crystallinity, surface coverage, and piezoelectric performance. Additionally, solid-state NMR spectroscopy was utilized to probe the interactions between P(VDF-TrFE) and UiO-66 in the composite. Evidence from solid-state NMR indicated polymer-MOF interactions, suggesting that the polymer strands are in close proximity to the UiO-66 pores, supporting a mixed surface coating and pore infiltration model. Furthermore, incorporating P(VDF-TrFE) enhanced the film’s areal coverage from 70% to 100%. While the thermal conductivity remained essentially unchanged, the composite film showed an improved piezoelectric effect. The composite with 91 wt % P(VDF-TrFE) exhibited the highest output voltage of 9.1 V and a sensitivity of 0.26 V/N under applied pressure. This work demonstrates the potential of solution shearing as a scalable technique for fabricating polymer-MOF composite thin films.

P(VDF-TrFE)↗
DOE OSTI2016

Gold-plasmon enhanced photocatalytic performance of anatase titania nanotubes under visible-light irradiation

Highlights: • APTMS/(TNTs-Au) was synthesized using a deposition-precipitation process. • APTMS/(TNTs-Au) showed superior visible light activity for the degradation of methylene blue. • The electromagnetic field distribution at the interface between TNTs and Au NPs were estimated by the 3D finite-difference time domain simulation. • The working mechanism of the photocatalytic activity of APTMS/(TNTs-Au) was illustrated. - Abstract: [3-Aminopropyl]trimethoxysilane-modified titania nanotubes decorated with Au nanoparticles (APTMS/(TNTs-Au)) nanocomposites were synthesized using a deposition-precipitation process. The results showed that Au nanoparticles (NPs) in the metallic state were firmly adhered to the surface of the anatase TNTs. APTMS/(TNTs-Au) exhibited great photocatalytic activities which were evaluated from the degradation rate of methylene blue aqueous solution under visible light irradiation. 3D finite-difference time domain simulation was performed to estimate the electromagnetic field distribution at the interface between TNTs and Au NPs. The visible photocatalytic activity of APTMS/(TNTs-Au) was largely attributed to the surface plasmon absorption of metallic Au NPs, which generated and transferred hot electrons to the CB of TNTs. In addition, the hot electrons on the surface of TNTs also suppressed the radiative electron–hole recombination and consequently enhanced the photocatalytic activity.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Dynamic Studies of Photo- and Electron-Induced Reactions on Nanostructured Surfaces

Our current research program examines the photon- and electron-initiated reaction mechanisms, half-collision dynamics, and other nonequilibrium-excited dynamics effects, occurring with excitation of adsorbates on well-characterized metal-oxide of metalchalcogenide surfaces, both in single-crystal and in nanocrystalline forms. The program has made extensive use of STM methods, collaborations with the Nanoprobing SPLEEM system at Brookhaven National Lab, and XPS methods. As our current program terminates, it brings to an end a sustained and major effort to understand reactions and electronic structure on materials of interest for photochemistry on precision surfaces. The last two close-out years of our program allowed us to complete our STM surface studies, interact with scientists at BNL on programs useful for two dimensional (2D) materials, and initiate a new effort in ultrafast two-photon photoemission spectroscopy. Our work has then shown how nanoscale stressed surface regions on sold crystal surfaces (typically TiO 2 ) lead to enhanced reactivity of adsorbate molecules – a result of much importance for nanocatalysis. In addition we have developed several new surface and near-surface probing methods – these, also, are of general use to the community. Finally due to the pervasive interest in DOE labs in these materials, we have exploited our earlier synchrotron-based understanding of the electronic structure in (2D) materials to begin a study of surface chemical reactions in these same materials and their corresponding molecular dynamics. These efforts are described briefly below and in the references or DOE publications presented in the publications section of this report. We are pleased to have been able to contribute so many publications in the last two years of this many year DOE program. We also wish to thank DOE for the sustained funding that has made this program such a success.

77 NANOSCIENCE AND NANOTECHNOLOGY↗