Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface instruments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

aosflow3 (a1)

The aerosol observing system (AOS) is the primary platform for in situ aerosol measurements at Earth’s surface. Each AOS has a different complement of instruments, which are selected to ensure the best measurements at each deployment site. The AOS measures aerosol optical properties to better understand how particles interact with solar radiation and influence the Earth's radiation balance. These measurements are useful for calculating parameters used in radiative forcing calculations, such as the aerosol single scattering albedo, asymmetry parameter, mass scattering efficiency, and hygroscopic growth. Measurements made with the AOS form a long-term record at the ARM fixed sites. Shorter measurement records are available from mobile deployments in a wide variety of geographical regions. These measurements are valuable for: identifying long-term changes in aerosol properties identifying atmospheric processes controlling aerosol life cycle and their influence on clouds providing experimental data for developing and testing atmospheric climate models.

54 ENVIRONMENTAL SCIENCES↗

aoshumidgr (01)

The aerosol observing system (AOS) is the primary platform for in situ aerosol measurements at Earth’s surface. Each AOS has a different complement of instruments, which are selected to ensure the best measurements at each deployment site. The AOS measures aerosol optical properties to better understand how particles interact with solar radiation and influence the Earth's radiation balance. These measurements are useful for calculating parameters used in radiative forcing calculations, such as the aerosol single scattering albedo, asymmetry parameter, mass scattering efficiency, and hygroscopic growth. Measurements made with the AOS form a long-term record at the ARM fixed sites. Shorter measurement records are available from mobile deployments in a wide variety of geographical regions. These measurements are valuable for: identifying long-term changes in aerosol properties identifying atmospheric processes controlling aerosol life cycle and their influence on clouds providing experimental data for developing and testing atmospheric climate models.

54 ENVIRONMENTAL SCIENCES↗

aosimpactor (a1)

The aerosol observing system (AOS) is the primary platform for in situ aerosol measurements at Earth’s surface. Each AOS has a different complement of instruments, which are selected to ensure the best measurements at each deployment site. The AOS measures aerosol optical properties to better understand how particles interact with solar radiation and influence the Earth's radiation balance. These measurements are useful for calculating parameters used in radiative forcing calculations, such as the aerosol single scattering albedo, asymmetry parameter, mass scattering efficiency, and hygroscopic growth. Measurements made with the AOS form a long-term record at the ARM fixed sites. Shorter measurement records are available from mobile deployments in a wide variety of geographical regions. These measurements are valuable for: identifying long-term changes in aerosol properties identifying atmospheric processes controlling aerosol life cycle and their influence on clouds providing experimental data for developing and testing atmospheric climate models.

54 ENVIRONMENTAL SCIENCES↗

aosimpactor (b1)

The aerosol observing system (AOS) is the primary platform for in situ aerosol measurements at Earth’s surface. Each AOS has a different complement of instruments, which are selected to ensure the best measurements at each deployment site. The AOS measures aerosol optical properties to better understand how particles interact with solar radiation and influence the Earth's radiation balance. These measurements are useful for calculating parameters used in radiative forcing calculations, such as the aerosol single scattering albedo, asymmetry parameter, mass scattering efficiency, and hygroscopic growth. Measurements made with the AOS form a long-term record at the ARM fixed sites. Shorter measurement records are available from mobile deployments in a wide variety of geographical regions. These measurements are valuable for: identifying long-term changes in aerosol properties identifying atmospheric processes controlling aerosol life cycle and their influence on clouds providing experimental data for developing and testing atmospheric climate models.

54 ENVIRONMENTAL SCIENCES↗

aosflow1 (a1)

The aerosol observing system (AOS) is the primary platform for in situ aerosol measurements at Earth’s surface. Each AOS has a different complement of instruments, which are selected to ensure the best measurements at each deployment site. The AOS measures aerosol optical properties to better understand how particles interact with solar radiation and influence the Earth's radiation balance. These measurements are useful for calculating parameters used in radiative forcing calculations, such as the aerosol single scattering albedo, asymmetry parameter, mass scattering efficiency, and hygroscopic growth. Measurements made with the AOS form a long-term record at the ARM fixed sites. Shorter measurement records are available from mobile deployments in a wide variety of geographical regions. These measurements are valuable for: identifying long-term changes in aerosol properties identifying atmospheric processes controlling aerosol life cycle and their influence on clouds providing experimental data for developing and testing atmospheric climate models.

54 ENVIRONMENTAL SCIENCES↗

aosflow2 (a1)

The aerosol observing system (AOS) is the primary platform for in situ aerosol measurements at Earth’s surface. Each AOS has a different complement of instruments, which are selected to ensure the best measurements at each deployment site. The AOS measures aerosol optical properties to better understand how particles interact with solar radiation and influence the Earth's radiation balance. These measurements are useful for calculating parameters used in radiative forcing calculations, such as the aerosol single scattering albedo, asymmetry parameter, mass scattering efficiency, and hygroscopic growth. Measurements made with the AOS form a long-term record at the ARM fixed sites. Shorter measurement records are available from mobile deployments in a wide variety of geographical regions. These measurements are valuable for: identifying long-term changes in aerosol properties identifying atmospheric processes controlling aerosol life cycle and their influence on clouds providing experimental data for developing and testing atmospheric climate models.

54 ENVIRONMENTAL SCIENCES↗

Surveyor 3 Preliminary Science Results

Surveyor III soft-landed on the Moon at 00:04 GMT on April 20, 1967. Data obtained have significantly increased our knowledge of the Moon. The Surveyor III spacecraft was similar to Surveyor I; the only major change in scientific instrumentation was the addition of a soil mechanics surface sampler. Surveyor III results at this preliminary evaluation of data give valuable information about the relation between the surface skin of under-dense material responsible for the photometric properties and the deeper layers of material whose properties resemble those of ordinary terrestrial soils. In addition, they provide new insight into the relation between the general lunar surface as seen by Surveyor I and the interior of a large subdued crater. The new results have also contributed to our understanding of the mechanism of downhill transport. Many critical questions cannot, however, be answered until final reduction of experimental data.

Source record↗

Use of a spacecraft borne altimeter for determining the mean sea surface and the geopotential

An experiment is proposed to test a first generation spacecraft-borne radar altimeter's capability to measure the topography of the sea surface. The initial radar altimeter will have an instrumental error of one meter and an overall accuracy to two to five meters. This instrument will thus improve the accuracy of the geoid from the present 10 to 20 meters to better than 5 meters. In order to detect storm surges, tidal forces, and ocean currents, an altimeter with an overall accuracy of at least ?1 meter will be required. The overall accuracy of the initial radar altimeter will thus primarily provide geodetic information and possible oceanographic information such as sea state.

Kahn, W. D.↗

Differential energy spectra of low energy (less than 8.5 MeV per nucleon) heavy cosmic rays during solar quiet times

Explorer 47 satellite observations of carbon, oxygen, and heavier nuclei differential energy spectra below 8.5 MeV/nucleon are presented for solar quiet time periods. A dE/dx vs E method for particle identification and energy determination was used. The instrumentation telescope included an isobutane proportional counter, a surface barrier Si detector, and a cylindrical plastic scintillator anticoincidence shield. The observations were performed outside the bow-shock and in the ecliptic plane. Results show an anisotropy of about 25% at 22 degrees west of the sun with a C/O ratio of 0.5 supporting a solar origin. The low energy portions of the C and O spectra have steep negative slopes, and the corresponding power law is given. Peculiarities in the O spectrum are discussed.

Hovestadt, D.↗

An S-band radiometer design with high absolute precision

A radiometer for the remote measurement of sea surface temperature is described. The development of an instrument capable not only of high relative accuracy (i.e., resolution) but also of high absolute precision is considered. The concepts underlying the design of an instrument capable of an absolute accuracy of a few tenths degrees Kelvin in the measurement of brightness temperature at S band are described. The role of the antenna is discussed, and the importance of high ohmic and beam efficiencies is stressed. The hardware itself is fully described, along with an outline concerning the design of a unique cryogenically cooled termination used to calibrate the whole radiometer, including antenna. Finally, some test results are presented that show that the design goals for the instrument have been closely approached.

Hardy, W. N.↗

Interpretations of the EOLE experiment. I - Temporal variation of Eulerian quantities

The EOLE data were obtained on the basis of the interrogation of nearly 500 constant density balloons by a satellite in a 50 deg inclined orbit with an orbital time of about 100 min. The isosteric surface in which the balloons operated closely approximates the 200-mb isobaric surface. Ambient temperature and pressure were determined by instruments. Lagrangian velocities were calculated from balloon displacements between successive satellite orbits. The properties of the EOLE data are considered together with averaging schemes and data problems, time sections, and questions of hemispheric energetics.

Webster, P. J.↗

A program of data synthesis from the ALSEP/CPLEE ALSEP/SIDE, and Explorer 35 magnetometer to investigate lunar terminator and nightside particle fluxes and surface interactions

Lunar nightside electron fluxes were studied with the aid of the ALSEP/CPLEE and other instruments. The flux events were shown to be due to (a) electrons propagating upstream from the earth's bow shock, (b) electrons thermalized and scattered to the lunar surface by disturbances along the boundary of the lunar solarwind cavity, and (c) solar wind electrons scattered to the lunar surface by lunar limb shocks and/or compressional disturbances. These electrons were identified as a cause of the high night surface negative potentials observed in tha ALSEP/SIDE ion data. A study was also made of the shadowing of magnetotail plasma sheet electrons by interactions between the lunar body and the ambient magnetic field and by interactions between charged particles and lunar remnant magnetic fields. These shadowing effects were shown to modify lunar surface and near-lunar potential distributions.

Reasoner, D. L.↗

Shuttle model tailcone pressure distribution at low subsonic speeds of a 0.03614-scale model in the NASA/LaRC low-turbulence pressure tunnel (LA81), volume 1

An investigation was conducted in the NASA/LaRC Low-Turbulence Pressure Tunnel on a 0.03614-scale orbiter model of a 089B configuration with a 139B configuration nose forward of F.S. 500. The tailcone was the TC sub 4 design and was instrumented with eighty-nine pressure orifices. Control surfaces were deflected and three wind tunnel mounting techniques were investigated over an angle-of-attack range from -2 deg to a maximum of 18 deg. In order to determine the sensitivity of the tailcone to changes in Reynolds number, most of the test was made at a Mach number of 0.20 over a Reynolds number range of 2.0 to 10 million per foot. A few runs were made at a Mach number of 0.30 at Reynolds numbers of 4.0, 6.0, and 8 million per foot.

Ball, J. W.↗

Lunar magnetic permeability, magnetic fields, and electrical conductivity temperature

In the time period 1969-1972 a total of five magnetometers were deployed on the lunar surface during four Apollo missions. Data from these instruments, along with simultaneous measurements from other experiments on the moon and in lunar orbit, were used to study properties of the lunar interior and the lunar environment. The principal scientific results from analyses of the magnetic field data are discussed. The results are presented in the following main categories: (1) lunar electrical conductivity, temperature, and structure; (2) lunar magnetic permeability, iron abundance, and core size limits; (3) the local remnant magnetic fields, their interaction with the solar wind, and a thermoelectric generator model for their origin. Relevant publications and presented papers are listed.

Parkin, C. W.↗

Distribution of atmospheric ozone and how it is measured

The total amount of ozone in a vertical column has been measured spectroscopically at near ultraviolet and visible wavelengths, using ground- and satellite-based instruments. The vertical distribution of ozone from the surface up to approximately 100 km has been measured by a variety of techniques - chemical and optical - and from a number of observing platforms, including balloon, rocket, and satellite platforms. The various methods presently used for determining the atmospheric ozone distribution are reviewed, along with a discussion of their advantages and disadvantages. The observed average distribution of total ozone for the period 1958-1975 shows the expected geographic and seasonal variations. The variations of total ozone, including hemispheric differences, are clearly associated with large-scale circulation processes in the lower stratosphere. Approximately ten years of observations of the vertical ozone distribution, up through the ozone maximum, also show geographic and seasonal variations strongly related to the lower stratosphere circulation. The distribution above the maximum, however, results from the interaction of photochemistry and stratospheric motions.

London, J.↗

Zodiacal light surface brightness measurements by Atmosphere Explorer-C

The visible airglow photometer on the Atmosphere Explorer-C satellite has been used to map the zodiacal light surface brightness at the wavelengths monitored by the instrument: 3371, 4278, 5200, 5577, 6300, and 7319 A. The study constitutes a survey over this wavelength range, covering most of the celestial sphere from altitudes above the atmospheric emissions and free from atmospheric scattering and attenuation. The intensity variations reveal enhancements near elongations of 130 deg and possibly near 60 deg at all wavelengths. The intensity of the zodiacal light near the ecliptic pole is found to be about 30 S10 units. The color ratio with respect to the sun is found to be redder than the sun (0.7) at all elongations.

Torr, M. R.↗

The National Transonic Facility - Status and operational planning

The National Transonic Facility is scheduled to be completed in 1982. Several technical concerns remain, including thermal stress constraints which may limit the rate at which temperatures can be changed, seal performance in the cryogenic environment, and the tunnel process controls which could affect data acquisition rate. The current design affords the capability of dealing with all these concerns if they become problems. The outstanding instrument need is a real-time model surface deformation measurement system. Finally, an examination of the occupancy cost and the cost of liquid nitrogen for high Reynolds number tests indicates that operating costs should not be an inhibiting factor in the use of the facility.

Howell, R. R.↗