Search NASA⌕ Search

SEARCH · Search NASA

Results for “ACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Hydrogen trapping and storage in the group IVB-VIB transition metal carbides

The transition metal carbides have been known to act as traps for hydrogen in steels as well as potential materials for hydrogen storage. Despite numerous experimental and a few theoretical studies, what impacts hydrogen trapping and storage in the transition metal carbides is not well understood. In this work, we use density functional theory to systematically investigate the bulk trapping and storage capabilities of the transition metal carbides. We specifically examine how trapping and storage changes with the transition metal, from the group IVB to group VIB, carbon concentration, and structure. Our results demonstrate a strong correlation between the trap energy and the number of valence electrons in the transition metal, suggesting that the group IVB transition metal carbides are the best carbides for trapping and storage. Hydrogen preferentially sits at octahedral interstices, e.g., the carbon vacancies, in the structure except in certain cases near the Me 2 C concentration when tetrahedral interstices, devoid of nearest neighbor carbon, can become more favorable. Our results further demonstrate that the lower the carbon concentration, the more hydrogen the transition metal carbide can store. These results demonstrate which carbides will act as the best traps for hydrogen.

08 HYDROGEN↗

On the selective growth of titania polymorphs in acidic aqueous medium

Highlights: Black-Right-Pointing-Pointer Mutual influence of peptizing and anions addition of titania hydrothermal growth was studied. Black-Right-Pointing-Pointer Sulfate and chloride control TiO{sub 2} phase or particles shape depending on the order of introduction. Black-Right-Pointing-Pointer A rationale of difference between sulfate and chloride effect was provided. Black-Right-Pointing-Pointer Ground state DFT and semi-empirical calculations of Ti species support the conclusions. -- Abstract: The influence of preparation conditions on the phase composition and morphology of titania was studied for the solids synthesized by hydrothermal treatment (HT) and peptizing of hydrous TiO{sub 2} sols in acidic medium. Mutual influence of peptizing and of additive anions (SO{sub 4}{sup 2-}, Cl{sup -}) on the nature of obtained polymorphs was for the first time systematically studied and coherently explained. The solids were characterized by XRD, Raman spectroscopy, and transmission electron microscopy. It was found that peptizing step preceding HT and the presence of anions play a crucial role for the selective formation of TiO{sub 2} anatase or rutile polymorphs. Low temperature peptizing leads to acicular rutile particles, whereas HT produces highly dispersed anatase. However if the HT was preceded by peptizing step, rutile was obtained in most cases. The influence of additives strongly depends on the moment of their introduction. Sulfate and chloride species can act as phase growth controllers, or as morphology modifiers. Sulfate hindered formation of rutile and favored anatase al low temperatures, but for already formed rutile seed, sulfate acted only as a shape controller. By contrast, chloride showed a strong tendency to promote rutile growth, whatever the conditions. A qualitative model was proposed explaining the effects observed, supported by ground state DFT and semi-empirical calculations of the aqueous Ti species.

36 MATERIALS SCIENCE↗

Preparation of water soluble L-arginine capped CdSe/ZnS QDs and their interaction with synthetic DNA: Picosecond-resolved FRET study

Graphical abstract: Förster resonance energy transfer (FRET) studies on the interaction of water soluble arginine-capped CdSe/ZnS QDs with ethidium bromide (EB) labeled synthetic dodecamer DNA. Highlights: ► We have solubilized CdSe/ZnS QD in water replacing their TOPO ligand by L-arginine. ► We have studied arginine@QD–DNA interaction using FRET technique. ► Arginine@QDs act as energy donor and ethidium bromide-DNA acts as energy acceptor. ► We have applied a kinetic model to understand the kinetics of energy transfer. ► Circular dichroism studies revealed negligible perturbation in the DNA B-form in the arg@QD-DNA complex. -- Abstract: We have exchanged TOPO (trioctylphosphine oxide) ligand of CdSe/ZnS core/shell quantum dots (QDs) with an amino acid L-arginine (Arg) at the toluene/water interface and eventually rendered the QDs from toluene to aqueous phase. We have studied the interaction of the water soluble Arg-capped QDs (energy donor) with ethidium (EB) labeled synthetic dodecamer DNA (energy acceptor) using picoseconds resolved Förster resonance energy transfer (FRET) technique. Furthermore, we have applied a model developed by M. Tachiya to understand the kinetics of energy transfer and the distribution of acceptor (EB-DNA) molecules around the donor QDs. Circular dichroism (CD) studies revealed a negligible perturbation in the native B-form structure of the DNA upon interaction with Arg-capped QDs. The melting and the rehybridization pathways of the DNA attached to the QDs have been monitored by the CD which reveals hydrogen bonding is the associative mechanism for interaction between Arg-capped QDs and DNA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanostructural evolution from nanosheets to one-dimensional nanoparticles for manganese oxide

Highlights: ► Nanosheets were transformed to other one-dimensional nanoparticles. ► Nanofibers, nanotubes, nanoribbons, and nanobelts were obtained. ► Nanoparticle morphology can be controlled with organic amines. ► Organic amines act as morphology directing agent. -- Abstract: This paper introduces a novel hydrothermal soft chemical synthesis process for manganese oxide nanostructured particles using two-dimensional manganese oxide nanosheets as precursor. In this process, a birnessite-type manganese oxide with a layered structure was exfoliated into its elementary layer nanosheets, and then the nanosheets were hydrothermally treated to transform the two-dimensional morphology of the nanosheets to one-dimensional nanoparticles. The manganese oxide nanofibers, nanotubes, nanobelts, nanoribbons, and fabric-ribbon-like particles constructed from nanofibers or nanobelts were obtained using this hydrothermal soft chemical process. The nanostructural evolution from the two-dimensional nanosheets to the one-dimensional nanoparticles was characterized by XRD, SEM, TEM, and TG-DTA analysis. The morphology and nanostructure of the products are strongly dependent on the molecular dimension of organic amine cations added in the reaction system. The organic amine cations act as a morphology directing agent in the nanostructural evolution process.

36 MATERIALS SCIENCE↗

The effects of re-firing process under oxidizing atmosphere and temperatures on the properties of strontium aluminate phosphors

Graphical abstract: The comparative emission spectra of standard and re-fired Phosphor A under oxidizing atmosphere at various temperatures. The colour of Phosphor A re-fired at higher temperatures above 900 °C shifted from yellowish-green to bluish-green in the dark. But, the bluish-green emission could only be seen when it was exposed to UV and disappeared as soon as the light source was removed. Moreover, the emission intensities decreased as the re-firing temperatures increased. This could be attributed to the oxidation of Eu{sup 2+} during the re-firing process. It is well known fact from the literature that the reduction of Eu{sup 3+} to Eu{sup 2+} in appropriate host materials needs an annealing process in a reducing atmosphere such as H{sub 2}, H{sub 2}/N{sub 2} mixture or CO. Up to now, the reduction phenomena of Eu{sup 3+} → Eu{sup 2+} in air have been found in phosphates (Ba{sub 3}(PO{sub 4}){sub 2}:Eu), sulphates (BaSO{sub 4}:Eu), borates (SrB{sub 4}O{sub 7}:Eu, SrB{sub 6}O{sub 10}:Eu and BaB{sub 8}O{sub 13}:Eu) and aluminates (Sr{sub 4}Al{sub 14}O{sub 25}:Eu). Interestingly, an apparent blue shift in the phosphorescence spectrum was observed in the samples re-fired at 1000 °C and above, indicating a minimal effect on the oxidation state or the electronic energy levels of the co-doped Dy{sup 3+} ions, which were thought to act as long-lived hole traps resulting in long afterglow. - Highlights: • This study examines the effects re-firing at oxidizing atmosphere of photoluminescence of three different commercial SrAl{sub 2}O{sub 4}:Eu{sup 2+},Dy{sup 3+}-phosphors. • All the commercial SrAl{sub 2}O{sub 4}:Eu{sup 2+},Dy{sup 3+}-phosphors completely lost their phosphorescence after being re-fired at 1300 °C. • Oxidizing environment and re-firing temperature naturally affecting the valance of Eu{sup 2+} may cause the basic lattice structure to be modified and also limit their applications at higher temperatures, such as third firing vetrosa décor or glaze applications in ceramic industry. • It was thought that this kind of study may be promising to provide many outcome studies, may act to encourage additional efforts along these lines. - Abstract: Inorganic phosphorescent pigments have a very wide application, consisting of ceramic decoration and glazes. Therefore, in the present study 3 different commercially available strontium aluminate phosphors (coded Phosphor A, B and C) emitting yellowish-green light were investigated to determine their behaviour when re-fired under oxidizing atmosphere. The phosphors were re-fired at 10 different temperatures and consequent effects were studied. All the samples were characterized by X-ray fluorescence (XRF), X-ray diffraction (XRD), laser particle size, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and fluorescence spectrometer analysis. It was found that firing them under oxidizing atmosphere strongly affected their phosphorescence abilities especially over 800–900 °C, because doped europium ions (Eu{sup 2+}) in their structures are oxidized to Eu{sup 3+}. It was also concluded that the phosphor powders clumped as the temperature rose, leading to their particle size distributions to change.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of superparamagnetic Fe{sub 3}O{sub 4} nanoparticles with ionic liquids as stabilizer

Highlights: • Superparamagnetic Fe{sub 3}O{sub 4} nanoparticles with good dispersity have been synthesized via hydrothermal method. • Ionic liquid [C{sub 16}mim]Cl acts as stabilizer for the Fe{sub 3}O{sub 4} nanoparticles. • Fe{sub 3}O{sub 4} nanoparticles have a saturation magnetization of 67.69 emu/g at 300 K. - Abstract: Superparamagnetic Fe{sub 3}O{sub 4} nanoparticles have been successfully synthesized under hydrothermal condition with the assistant of ionic liquid 1-hexadecyl-3-methylimidazolium chloride ([C{sub 16}mim]Cl). The structure and morphology of the sample have been investigated by X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), transmission electron microscopy (TEM), and high-resolution TEM (HRTEM), and the results indicate that the as-synthesized inverse spinel Fe{sub 3}O{sub 4} nanoparticles have an average diameter of about 10 nm and exhibit relatively good dispersity. More importantly, it is found that [C{sub 16}mim]Cl acts as stabilizer for the Fe{sub 3}O{sub 4} nanoparticles by adsorbing on the particles surfaces to prevent the agglomeration. In addition, the obtained superparamagnetic Fe{sub 3}O{sub 4} nanoparticles have a saturation magnetization of 67.69 emu/g at 300 K.

36 MATERIALS SCIENCE↗

Heteropolytungstate nanoparticles: Microemulsion-mediated preparation and investigation of their catalytic activity in the epoxidation of olefins

Highlights: • Keggin type Q{sub 3}PW{sub 12}O{sub 40} nanoparticles were synthesized by using microemulsion system. • The nanoparticles have uniform size of about 25 nm and spherical morphologies. • The prepared nanoparticles act as reusable catalyst in the epoxidation of olefins with H{sub 2}O{sub 2}. - Abstract: Keggin type Q{sub 3}PW{sub 12}O{sub 40} nanoparticles (Q = cetyltrimethylammonium cation) were synthesized in water-in-oil (w/o) microemulsion consisted of water/cetyltrimethylammonium bromide/n-butanol/isooctane. Reaction of Na{sub 2}WO{sub 4}, Na{sub 2}HPO{sub 4} and hydrochloric acid within water containing nanoreactors of reverse micelles resulted in the preparation of Q{sub 3}PW{sub 12}O{sub 40} nanoparticles. The resultant nanoparticles were analyzed by physicochemical methods such as FT-IR spectroscopy, X-ray diffraction, energy-dispersive X-ray analysis, thermogravimetric analyses (TGA-DTA), scanning and transmission electron microscopy and atomic force microscopy which show nearly uniform spherical nanoparticles with size of about 15 nm. Finally, catalytic activity of the Q{sub 3}PW{sub 12}O{sub 40} nanoparticles was examined in the epoxidation of olefins with H{sub 2}O{sub 2}. The prepared nanoparticles acted as recoverable and reusable catalyst in the epoxidation of olefins with H{sub 2}O{sub 2}.

36 MATERIALS SCIENCE↗

Nickel/silicon core/shell nanosheet arrays as electrode materials for lithium ion batteries

Highlights: • Ni nanosheet arrays is the core and Si layer is the shell. • Ni nanosheet arrays act as a three-dimensional current collector to support Si. • Ni nanosheet arrays can improve the conductivity and stability of the electrode. • Ni/Si nanosheet arrays exhibit excellent cyclic and rate performance. - Abstract: Ni/Si core/shell nanosheet arrays are proposed to enhance the electrochemical lithium-storage properties of silicon. The arrays are characterized by means of X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The arrays are micro-sized in height, which are constructed by interconnected Ni nanosheet as the core and Si coating layer as the shell. The electrochemical properties as anode materials of lithium ion batteries are investigated by cyclic voltammetry (CV) and galvanostatic charge-discharge tests. The arrays can achieve high reversible capacity, good cycle stability and high rate capability. It is believed that the enhanced electrochemical performance is attributed to the electrode structure, because the interconnected Ni nanosheet can act as a three-dimensional current collector, and it has the ability of improving the electrode conductivity, enlarging the electrochemical reaction interface, and suppressing the electrode pulverization.

36 MATERIALS SCIENCE↗

Controlled synthesis of Ag{sub 3}PO{sub 4}/BiVO{sub 4} composites with enhanced visible-light photocatalytic performance for the degradation of RhB and 2, 4-DCP

Highlights: • Ag{sub 3}PO{sub 4}/BiVO{sub 4} composites were synthesized by in-situ precipitation method. • Ag{sub 3}PO{sub 4}/BiVO{sub 4} is more efficient than pure Ag{sub 3}PO{sub 4} and BiVO{sub 4} for RhB and 2, 4-DCP degradation. • Ag{sub 3}PO{sub 4}/BiVO{sub 4} can act as a high performance and low cost photocatalyst. - Abstract: Ag{sub 3}PO{sub 4}/BiVO{sub 4} composites were fabricated by in-situ precipitation method. Results showed that Ag{sub 3}PO{sub 4}/BiVO{sub 4} composites exhibited higher photocatalytic activity than that of pure BiVO{sub 4} and Ag{sub 3}PO{sub 4} sample under visible light irradiation. The effect of Ag{sub 3}PO{sub 4}:BiVO{sub 4} ratio on the photocatalytic activity was systemically studied and the optimum molar ratio of Ag{sub 3}PO{sub 4}:BiVO{sub 4} was 1:5. The Ag{sub 3}PO{sub 4}/BiVO{sub 4}-5 exhibited excellent photocatalytic activity for the degradation of Rhodamine B (ca. 92% in 30 min) and 2, 4-dichlorophenol (ca. 84% in 180 min) under visible light irradiation. The enhanced photocatalytic activity could be mainly ascribed to the suitable Ag{sub 3}PO{sub 4}/BiVO{sub 4} heterojunction interface and the smaller particles of Ag{sub 3}PO{sub 4} compared to pure Ag{sub 3}PO{sub 4} particles which could promote the separation of photoinduced electron-hole pairs. The Ag{sub 3}PO{sub 4}/BiVO{sub 4} composite can significantly reduce the silver consumption compared to the pure Ag{sub 3}PO{sub 4}. It is worth noting that Ag{sub 3}PO{sub 4}/BiVO{sub 4} composite can act as a high performance and low cost visible-light-driven photocatalyst for environmental remediation.

36 MATERIALS SCIENCE↗

High rate lithium-sulfur batteries enabled by mesoporous TiO{sub 2} nanotubes prepared by electrospinning

Graphical abstract: Mesoporous titanium dioxide nanotubes (MTDNTs) used as host for sulfur was prepared by electrospinning technique and subsequent thermal treatment. The nanotube walls of MTDNTs act as a host for sulfur and the hollow structure is favorable for the fast transmission of Li{sup +} ions. After sulfur was encapsulated into the pores of nanotube walls of MTDNTs, the MTDNTs/S composite electrode displays a relatively good cycling performance and especially excellent rate performance (about 610 mAh g-1 at 8 C). - Highlights: • Mesoporous titanium dioxide nanotubes (MTDNTs) were fabricated by electrospinning and subsequent thermal treatment. • MTDNTs was used as host for sulfur, TEM and SEM analysis showed that sulfur distributed in the meso pores of MTDNTs walls. • MTDNTs/S composite cathode delivers a reversible discharge capacity of 610 mAh g{sup −1} at a high current rate of 8 C. - Abstract: Mesoporous titanium dioxide nanotubes (MTDNTs) were prepared by electrospinning and subsequent thermal treatment. The as-synthesized MTDNTs possess anatase mischcrystal structure, hollow texture morphology, and a relatively high specific surface area of 93.6 m{sup 2} g{sup −1} with a pore volume of 0.2190 cm{sup −3} g{sup −1}. The nanotube walls of MTDNTs act as a host for sulfur and the hollow structure is favorable for the fast transmission of Li{sup +} ions. After sulfur was encapsulated into the pores of nanotube walls of MTDNTs, the MTDNTs/S composite electrode displays a relatively good cycling performance and especially excellent rate performance (about 610 mAh g{sup −1} at 8 C). The retention capacity can be up to 74.2% when the discharge rate increases from 0.5C to 8.0 C.

36 MATERIALS SCIENCE↗

Bi superlattice nanopolygons at BiOCl (001) nanosheet assembled architectures for visible-light photocatalysis

Highlights: • Bi superlattice nanopolygons at hierarchical BiOCl architectures were synthesized. • BiOCl (001) architectures acted as the precursor and template of final products. • The Bi/BiOCl samples displayed good photocatalytic activity on BPA degradation. - Abstract: Bi superlattice structures at hierarchical BiOCl architectures were successfully synthesized via an in-situ reduction process. The nanosheet assembled BiOCl microflowers with exposed (001) facets acted as the precursor and template of complex architectures. Bi nanopolygons or nanodots were selectively formed at the surface of BiOCl nanosheets on controlling the reduction temperatures. Lamellar structure of BiOCl along [001] direction facilitates the homogeneous distribution of the reduced Bi particles in Bi/BiOCl architectures and induces the formation of superlattice structures. The Bi/BiOCl architectures with superlattice character as well as surface plasmon resonance (SPR) effect of Bi nanoparticles expand superior visible-light photocatalytic activity on colorless BPA degradation under guidance of RhB molecules.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structure of the Yeast DEAD Box Protein Mss116p Reveals Two Wedges that Crimp RNA

The yeast DEAD box protein Mss116p is a general RNA chaperone that functions in mitochondrial group I and II intron splicing, translational activation, and RNA end processing. Here we determined high-resolution X-ray crystal structures of Mss116p complexed with an RNA oligonucleotide and ATP analogs AMP-PNP, ADP-BeF{sub 3}, or ADP-AlF{sub 4}{sup -}. The structures show the entire helicase core acting together with a functionally important C-terminal extension. In all structures, the helicase core is in a closed conformation with a wedge {alpha} helix bending RNA 3' of the central bound nucleotides, as in previous DEAD box protein structures. Notably, Mss116p's C-terminal extension also bends RNA 5' of the central nucleotides, resulting in RNA crimping. Despite reported functional differences, we observe few structural changes in ternary complexes with different ATP analogs. The structures constrain models of DEAD box protein function and reveal a strand separation mechanism in which a protein uses two wedges to act as a molecular crimper.

36 MATERIALS SCIENCE↗

Bidentate Lewis bases are preferred for passivation of MAPbI 3 surfaces: A time-domain ab initio analysis

We report chemical passivation is a predominant approach to inhibit intrinsic defects responsible for electron–hole recombination in perovskite solar cells. Using time-domain density functional theory combined with nonadiabatic molecular dynamics, we demonstrate defect passivation by separation of electrons and holes in metal halide perovskites (MHPs), and show that bidentate ligands exhibit the best performance. Defects in traditional semiconductors create deep midgap states, and passivation eliminates these states. In contrast, common defects produce no deep midgap states in MHPs. Instead, defects localize electrons and holes around defect sites, enhancing electron–hole interaction. Defect passivation in MHPs acts to separate charges, decreasing electron–hole and charge–phonon interactions, and increasing charge lifetimes. Bidentate ligands work best, because they can passivate both unsaturated chemical bonds created due to vacancy defects. Bidentate ligands with spatially separated binding sites are preferred, since they provide better match to the sparse inorganic lattice of MHPs. Similar to the Lewis base ligands, water also acts as a ligand and extends charge lifetimes, with the oxygen atom donating its lone electron pair to the defect site. However, water accelerates chemical degradation of MHPs. The binding energy of most ligands is larger than that of water, and therefore, the ligands displace water, increase MHP stability and prolong carrier lifetimes. The established physical mechanism of defect passivation, and the specific principles guiding the choice of passivating molecules advance our understanding of the exceptional properties of MHPs and suggest routes for further improvement of MHP performance in solar energy and optoelectronic applications.

36 MATERIALS SCIENCE↗

Deployment of a double scatter system for directional detection of background neutron radiation

The detection of special nuclear materials (SNM) requires the understanding of nuclear signatures that allow the discrimination against background. In particular, understanding neutron background characteristics such as count rates and energies and their correlations with environmental conditions and surroundings of measurement locations is important in enhancing SNM detection capabilities. The Mobile Imager of Neutrons for Emergency Responders (MINER) was deployed for 8 weeks in downtown San Francisco (CA) to study such neutron background characteristics in an urban environment. Of specific interest was the investigation of the impact of surrounding buildings on the neutron background count rates and to answer the question whether buildings act as absorber of neutrons or as sources via the so-called ship effect. MINER consists of 16 liquid scintillator detector elements and can be operated as a neutron spectrometer, as a neutron imager, or simply as a counter of fast neutrons. As expected, the neutron background rate was found to be inversely proportional to the atmospheric pressure. In the energy range where MINER is most sensitive, approximately 1–10 MeV, it was found that the shape of the detected background spectrum is similar to that of a detected fission spectrum, indicating the limited discrimination power of the neutron energy. The similarities between the detected background neutron spectrum and fission sources makes it difficult to discriminate SNM from background based solely on the energies observed. The images produced using maximum likelihood expectation maximization revealed that neutrons preferentially are coming from areas in the environment that have open sky, indicating that the surrounding buildings act as absorbers of neutrons rather than sources as expected by the ship effect. Here, the inherent properties of a neutron scatter camera limit the achievable image quality and the effective deployment to systematically map neutron background signatures due to the low count rate.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Understanding land use change impacts on microclimate using Weather Research and Forecasting (WRF) model

To explore potential climatic consequences of land cover change in the Kolkata Metropolitan Development area, we projected microclimate conditions in this area using the Weather Research and Forecasting (WRF) model driven by future land use scenarios. Specifically, we considered two land conversion scenarios including an urbanization scenario that all the wetlands and croplands would be converted to built-up areas, and an irrigation expansion scenario in which all wetlands and dry croplands would be replaced by irrigated croplands. Results indicated that land use and land cover (LULC) change would dramatically increase regional temperature in this area under the urbanization scenario, but expanded irrigation tended to have a cooling effect. In the urbanization scenario, precipitation center tended to move eastward and lead to increased rainfall in eastern parts of this region. Increased irrigation stimulated rainfall in central and eastern areas but reduced rainfall in southwestern and northwestern parts of the study area. This study also demonstrated that urbanization significantly reduced latent heat fluxes and albedo of land surface; while increased sensible heat flux changes following urbanization suggested that developed land surfaces mainly acted as heat sources. In this study, climate change projection not only predicts future spatiotemporal patterns of multiple climate factors, but also provides valuable insights into policy making related to land use management, water resource management, and agriculture management to adapt and mitigate future climate changes in this populous region. (C) 2017 Elsevier Ltd. All rights reserved.

AIR-QUALITY↗

Conserving asphalt resources: Rethinking rejuvenator performance evaluation through peptizing efficiency

Timely rejuvenation and restoration of asphalt are essential conservation practices that help preserve and extend the service life of roads, bridges, driveways, and parking lots. The performance of asphalt rejuvenators is often assessed based on their diffusion rates and softening power, yet these metrics alone fail to capture true rejuvenation potential. Here, this study integrates density functional theory (DFT) modeling with experimental analysis to show that rejuvenation effectiveness is primarily governed by molecular interactions with oxidized asphaltene nanoaggregates. DFT results revealed that amide- and unsaturated-chain compounds, such as hexadecanamide, oleic acid, and 9,17-octadecadienal, act cooperatively to disrupt π–π stacking and exfoliate asphaltene layers, reducing binding strength and enhancing dispersion. Unlike bulky, rigid molecules that remain trapped, these components remain mobile and repeatedly interact with multiple aggregation sites. Experimental validation using rheometry and FTIR confirmed that such molecularly compatible rejuvenators restore the binder flexibility and polydispersity, even when diffusion is relatively slow. Building on this mechanistic foundation, six rejuvenators (A2, A5, A7, A8, A9, and A10) were evaluated using a three-metric performance framework encompassing cracking resistance (Glover–Rowe parameter), UV stability, and surface hydrophobicity. Among the six rejuvenators evaluated, A9 exhibited the highest overall performance, reducing the Glover–Rowe cracking parameter by 85% (from 351 kPa to 53 kPa), demonstrating the greatest resistance to UV-induced aging with a stability index of 4.17 h·kPa⁻¹, and increasing surface hydrophobicity to a contact angle of 103.6°. Its superior performance is primarily attributed to its amide- and unsaturated-chain components, which act cooperatively to disrupt π–π stacking interactions and exfoliate asphaltene layers, thereby promoting molecular deagglomeration and enhancing long-term durability. These results shift the criteria for selecting rejuvenators: effective candidates must pair the electronic capability to unlock aged asphaltenes with sufficient structural stability to resist secondary aging and restore hydrophobicity. Restoring hydrophobicity is critical, as aging reduces the asphalt’s water repellency and increases water diffusion, which in turn accelerates moisture-related damage; consequently, a high-performing rejuvenator must effectively restore the binder’s hydrophobic characteristic. Collectively, these findings provide a framework for the rational design of next-generation of bio-based rejuvenators that enhance pavement longevity and promote long-term sustainability.

Aging↗

High-energy synchrotron study of in-pile-irradiated U–Mo fuels

Here synchrotron scattering analysis results on U–7wt.%Mo fuel specimens irradiated in the Advanced Test Reactor to three burnup levels (3.0, 5.2, and 6.3 × 1021 fission/cm3) are reported. Mature fission gas bubble superlattice was observed to form at intermediate burnup. The superlattice constant was determined to be 11.7 and 12.0 nm by wide-angle and small-angle scattering respectively. Grain sub-division takes place throughout the irradiation and causes the collapse of the superlattice at high burnup. The bubble superlattice expands the U–Mo lattice and acts as strong sink for radiation-induced defects. The evolution of dislocation loops was, therefore, suppressed until the bubble superlattice collapsed.

metallic nuclear fuel↗

OMP Peptides Activate the DegS Stress-Sensor Protease by a Relief of Inhibition Mechanism

In the E. coli periplasm, C-terminal peptides of misfolded outer-membrane porins (OMPs) bind to the PDZ domains of the trimeric DegS protease, triggering cleavage of a transmembrane regulator and transcriptional activation of stress genes. We show that an active-site DegS mutation partially bypasses the requirement for peptide activation and acts synergistically with mutations that disrupt contacts between the protease and PDZ domains. Biochemical results support an allosteric model, in which these mutations, active-site modification, and peptide/substrate binding act in concert to stabilize proteolytically active DegS. Cocrystal structures of DegS in complex with different OMP peptides reveal activation of the protease domain with varied conformations of the PDZ domain and without specific contacts from the bound OMP peptide. Taken together, these results indicate that the binding of OMP peptides activates proteolysis principally by relieving inhibitory contacts between the PDZ domain and the protease domain of DegS.

59 BASIC BIOLOGICAL SCIENCES↗