Search NASA⌕ Search

SEARCH · Search NASA

Results for “Advanced Modeling and Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Future Nuclear Energy Factual Status Document: Resource Document for the Workshop on Basic Research Needs for Future Nuclear Energy, July 2017

Since commercialization in the mid-1950s, nuclear power has been widely deployed and provides an important clean source of energy, primarily through the generation of electricity. There are currently 449 commercial nuclear power reactors operating in 31 countries with over 390 GWe total capacity, with 99 operating units in the United States with a total generating capacity of about 100 GWe. Nuclear power plants provide over 11% of the world’s electricity production and, as of 2016, thirteen countries rely on nuclear energy to supply at least one-quarter of their total electricity. Virtually all of that power is generated with water-cooled reactor systems. A number of advanced nuclear energy system concepts have been developed to provide improved efficiency, greater fissile fuel utilization, reduced high level waste generation, and increased margins of safety over today’s water-cooled systems. However, there are a number of technical challenges that must be addressed to enable the broad deployment of these systems from concept to the electrical grid. This Technical Document is written to provide workshop participants with an overview of the current status of a number of advanced reactor systems: Key issues for advanced nuclear energy, including coolants, materials in extremes (irradiation, coolant, and/or high temperature) and interfaces; Nuclear fuel technologies for key reactor types and limitations in testing and design; State of science and understanding for nuclear systems, including characterization, testing, and modeling and simulation tools. For each of these technical areas, this document describes the technological challenge, current state of the art for the technology, and barriers to advanced nuclear concepts.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

A multiphysics model of the versatile test reactor based on the MOOSE framework

The traditional modeling approach for sodium fast reactor cores relies on separate physics models, where the fuel performance, thermal–hydraulics, and neutronics calculations required to predict the core physics characteristics for nominal conditions are decoupled by relying on user-imposed boundary conditions. Here, this paper aims at evaluating the impact of multiphysics simulations for predicting the core characteristics of the Versatile Test Reactor, which is being designed as a 300-MWt sodium-cooled fast reactor. The purpose of the Versatile Test Reactor is to accelerate the testing of advanced nuclear materials in the United States. The proposed multiphysics model relies on the Griffin reactor physics code, the SAM thermal–hydraulic system code, the BISON fuel performance code, as well as generic Multiphysics Object-Oriented Simulation Environment capabilities implemented in the open-source tensor mechanics module. For k eff calculations, the introduction of a tight coupling between the neutronics, thermo-mechanical and thermal–hydraulics models induces a change of around 543 pcm in the eigenvalue, compared to the traditional standalone neutronics calculation where approximate temperature profiles are used. The multiphysics model is then employed for quantifying the impact of the thermal conductivity uncertainties on some of the key figures of merit, such as the fuel centerline temperature, assembly powers, and keff for nominal core conditions. As anticipated, uncertainties on fuel thermal conductivity mostly impact the fuel centerline temperature, and to a lesser extend the k eff .

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1981

Mathematical modeling and SAR simulation multifunction SAR technology efforts

The orbital SAR (synthetic aperture radar) simulation data was used in several simulation efforts directed toward advanced SAR development. Efforts toward simulating an operational radar, simulation of antenna polarization effects, and simulation of SAR images at serveral different wavelengths are discussed. Avenues for improvements in the orbital SAR simulation and its application to the development of advanced digital radar data processing schemes are indicated.

Griffin, C. R.↗
DOE OSTI2016

Internal Domains of Natural Porous Media Revealed: Critical Locations for Transport, Storage, and Chemical Reaction

Internal pore domains exist within rocks, lithic fragments, subsurface sediments and soil aggregates. These domains, which we term internal domains in porous media (IDPM), contain a significant fraction of their porosity as nanopores, dominate the reactive surface area of diverse porous media types, and are important locations for chemical reactivity and hydrocarbon storage. Traditionally difficult to interrogate, advances in instrumentation and imaging methods are providing new insights on the physical structures and chemical attributes of IDPM. In this review we: discuss analytical methods to characterize IDPM, evaluate what has been learned about their size distributions, connectivity, and extended structures; determine whether they exhibit unique chemical reactivity; and assess potential for their inclusion in reactive transport models. Three key findings are noteworthy. 1) A combination of methods now allows complete characterization of the porosity spectrum of natural materials and its connectivity; while imaging microscopies are providing three dimensional representations of the interconnected pore network. 2) Chemical reactivity in pores <10 nm is expected to be different from micro and macropores, yet research performed to date is inconclusive on the nature, direction, and magnitude of effect. 3) Existing continuum reactive transport models treat IDPM as a sub-grid feature with average, empirical, scale-dependent parameters; and are not formulated to include detailed information on pore networks. Overall we find that IDPM are key features controlling hydrocarbon release from shales in hydrofracking systems, organic matter stabilization and recalcitrance in soil, weathering and soil formation, and long term inorganic and organic contaminant behavior in the vadose zone and groundwater. We conclude with an assessment of impactful research opportunities to advance understanding of IDPM, and to incorporate their important effects in reactive transport models for improved environmental simulation and prediction.

58 GEOSCIENCES↗
DOE OSTI2019

Simultaneous numerical representation of soil microsite production and consumption of carbon dioxide, methane, and nitrous oxide using probability distribution functions

Production and consumption of nitrous oxide (N 2 O), methane (CH 4 ), and carbon dioxide (CO 2 ) are affected by complex interactions of temperature, moisture, and substrate supply, which are further complicated by spatial heterogeneity of the soil matrix. This microsite heterogeneity is often invoked to explain non-normal distributions of greenhouse gas (GHG) fluxes, also known as hot spots and hot moments. To advance numerical simulation of these belowground processes, we expanded the Dual Arrhenius and Michaelis-Menten (DAMM) model, to apply it consistently for all three GHGs with respect to the biophysical processes of production, consumption, and diffusion within the soil, including the contrasting effects of oxygen (O 2 ) as substrate or inhibitor for each process. High-frequency chamber-based measurements of all three GHGs at the Howland Forest (ME, USA) were used to parameterize the model using a multiple constraint approach. The area under a soil chamber is partitioned according to a bivariate lognormal probability distribution function (PDF) of carbon (C) and water content across a range of microsites, which leads to a PDF of heterotrophic respiration and O 2 consumption among microsites. Linking microsite consumption of O 2 with a diffusion model generates a broad range of microsite concentrations of O 2 , which then determines the PDF of microsites that produce or consume CH 4 and N 2 O, such that a range of microsites occurs with both positive and negative signs for net CH 4 and N 2 O flux. Results demonstrate that it is numerically feasible for microsites of N 2 O reduction and CH 4 oxidation to co-occur under a single chamber, thus explaining occasional measurement of simultaneous uptake of both gases. Simultaneous simulation of all three GHGs in a parsimonious modeling framework is challenging, however it increases confidence that agreement between simulations and measurements is based on skillful numerical representation of processes across a heterogeneous environment.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

A Scalable Multi-Modal Framework for High-Fidelity Distributed Human Mobility Simulations

The development of data-driven models for human mobility in urban settings requires access to substantial and diverse real-world data. However, existing historical data often presents challenges such as limited volume, variety, and veracity, as well as missing data and privacy preservation concerns. Also, urban mobility modeling is inherently time-variant, complex, and multi-modal, encompassing everything from individual walking and running to private road travel and large-scale public transportation. These challenges call for innovative solutions to overcome data limitations and compute needs to model mobility behaviors accurately. To address these challenges, we propose a distributed, co-simulation-based architecture DURMOSim that integrates real-world data with scalable, high-fidelity simulations, demonstrating distributed co-simulation feasibility with existing mobility models. DURMOSim underpins a modular integration that would enable using any available mobility simulators for greater extensibility and scalability in performing various urban scenarios. In this paper, we present the design, implementation, and performance evaluation of DURMOSim, highlighting its capability to model population-scale mobility patterns. Our initial results show its ability to dynamically synchronize multiple simulation models at runtime with negligible computational overhead. We believe DURMOSim could be a robust tool for advancing urban mobility research and intelligent transportation systems.

Yoginath, Srikanth [ORNL] (ORCID:0000000184236050)↗
NASA NTRS1975

Subgrid or Reynolds stress-modeling for three-dimensional turbulence computations

A review is given of recent advances in two distinct computational methods for evaluating turbulence fields, namely, statistical Reynolds stress modeling and turbulence simulation, where large eddies are followed in time. It is shown that evaluation of the mean Reynolds stresses, rather than use of a scalar eddy viscosity, permits an explanation of streamline curvature effects found in several experiments. Turbulence simulation, with a new volume averaging technique and third-order accurate finite-difference computing is shown to predict the decay of isotropic turbulence in incompressible flow with rather modest computer storage requirements, even at Reynolds numbers of aerodynamic interest.

Rubesin, M. W.↗
NASA NTRS1987

Advances and trends in computational structural mechanics

The development status and applicational range of techniques in computational structural mechanics (CSM) are evaluated with a view to advances in computational models for material behavior, discrete-element technology, quality assessment, the control of numerical simulations of structural response, hybrid analysis techniques, techniques for large-scale optimization, and the impact of new computing systems on CSM. Primary pacers of CSM development encompass prediction and analysis of novel materials for structural components, computational strategies for large-scale structural calculations, and the assessment of response prediction reliability together with its adaptive improvement.

Noor, Ahmed K.↗
NASA NTRS1988

Simulated final approach path captures using the microwave landing system

Computer simulation results are presented for intercepting final approach paths using various Microwave Landing System (MLS) path capture concepts. This study, conducted under the Advanced Transport Operating System (ATOPS) program, simulated these captures using the MD-80 aircraft as the study model. Several different capture concepts were investigated. Systems that could be retrofitted into existing aircraft with minimum hardware and software changes were considered. An enhanced ILS look-alike capture provided improved tracking performance over conventional ILS without using a full-up path computer. The other concepts used waypoint databases and path computers to provide smart captures. These captures included lateral path intercepts as well as vertical path control. Winds, turbulence, and MLS noise were included in the simulation. In all cases, acceptable tracking errors were obtained during transition to the final approach path.

Feather, J. B.↗
NASA NTRS1990

Instability and transition; Proceedings of the Workshop, Hampton, VA, May 15-June 9, 1989. Vols. 1 & 2

The proceedings of the workshop on instability and transition, sponsored by the Institute for Computer Applications in Science and Engineering and the Langley Research Center, during May-June 1989 are presented. The proceedings contain panel discussions and the research papers resulting from the collaborative projects started during the workshop and completed shortly thereafter. Six panels are represented: theory, low-speed experiment, high-speed experiment, computation, receptivity, and roughness panels. Focus is concentrated on receptivity, advanced asymptotics, boundary-layer stability, free shear flows, compressible stability and transition, transition simulation, and transition modeling. The panel summaries and the position papers by the panelists as well as research papers of the experiment group and the receptivity group are discussed.

Hussaini, M. Y.↗
NASA NTRS1992

A brief overview of computational structures technology related activities at NASA Lewis Research Center

The presentation gives a partial overview of research and development underway in the Structures Division of LeRC, which collectively is referred to as the Computational Structures Technology Program. The activities in the program are diverse and encompass four major categories: (1) composite materials and structures; (2) probabilistic analysis and reliability; (3) design optimization and expert systems; and (4) computational methods and simulation. The approach of the program is comprehensive and entails exploration of fundamental theories of structural mechanics to accurately represent the complex physics governing engine structural performance, formulation, and implementation of computational techniques and integrated simulation strategies to provide accurate and efficient solutions of the governing theoretical models by exploiting the emerging advances in computer technology, and validation and verification through numerical and experimental tests to establish confidence and define the qualities and limitations of the resulting theoretical models and computational solutions. The program comprises both in-house and sponsored research activities. The remainder of the presentation provides a sample of activities to illustrate the breadth and depth of the program and to demonstrate the accomplishments and benefits that have resulted.

Hopkins, Dale A.↗
NASA NTRS1998

Accurate Modeling of the Postbuckling Response of Composite Panels with Skewed Stiffeners

Modeling procedures which predict accurately the postbuckling response of composite panels with skewed stiffeners are presented. A particular experimental program is considered and detailed finite element models are created to represent the conditions in the experiment. First, a simple baseline model with minimal detail is defined. Then, a number of modeling refinements that improve the accuracy of the model are identified. These refinements are applied individually to the baseline model to assess the effect of each refinement on the predicted response. The individual refinements are then combined to create an advanced finite element model. In addition to model refinements which affect the overall panel response, a modeling procedure for simulating nonuniform initial load introduction that is specific to an particular experiment is described and demonstrated. By implementing a number of modeling refinements, a finite element model is developed which improves the correlation between the measured and predicted responses. The skewed stiffener detail and anisotropic skin in the selected problem create axial-shear stiffness coupling which makes this problem sensitive to the constraint on the shear displacement. The remainder of the modeling refinements considered are applicable to general structural configurations. The results presented may be used to guide future efforts to improve correlation between predicted and measured responses for post buckled stiffened panels.

Young, Richard D.↗
NASA NTRS2004

Simulations of Cavitating Cryogenic Inducers

Simulations of cavitating turbopump inducers at their design flow rate are presented. Results over a broad range of Nss, numbers extending from single-phase flow conditions through the critical head break down point are discussed. The flow characteristics and performance of a subscale geometry designed for water testing are compared with the fullscale configuration that employs LOX. In particular, thermal depression effects arising from cavitation in cryogenic fluids are identified and their impact on the suction performance of the inducer quantified. The simulations have been performed using the CRUNCH CFD[R] code that has a generalized multi-element unstructured framework suitable for turbomachinery applications. An advanced multi-phase formulation for cryogenic fluids that models temperature depression and real fluid property variations is employed. The formulation has been extensively validated for both liquid nitrogen and liquid hydrogen by simulating the experiments of Hord on hydrofoils; excellent estimates of the leading edge temperature and pressure depression were obtained while the comparisons in the cavity closure region were reasonable.

Dorney, Dan↗
NASA NTRS2004

Advanced Computational Modeling of Vapor Deposition in a High-pressure Reactor

In search of novel approaches to produce new materials for electro-optic technologies, advances have been achieved in the development of computer models for vapor deposition reactors in space. Numerical simulations are invaluable tools for costly and difficult processes, such as those experiments designed for high pressures and microgravity conditions. Indium nitride is a candidate compound for high-speed laser and photo diodes for optical communication system, as well as for semiconductor lasers operating into the blue and ultraviolet regions. But InN and other nitride compounds exhibit large thermal decomposition at its optimum growth temperature. In addition, epitaxy at lower temperatures and subatmospheric pressures incorporates indium droplets into the InN films. However, surface stabilization data indicate that InN could be grown at 900 K in high nitrogen pressures, and microgravity could provide laminar flow conditions. Numerical models for chemical vapor deposition have been developed, coupling complex chemical kinetics with fluid dynamic properties.

Cardelino, Beatriz H.↗
NASA NTRS2004

Advanced Computational Modeling of Vapor Deposition in a High-Pressure Reactor

In search of novel approaches to produce new materials for electro-optic technologies, advances have been achieved in the development of computer models for vapor deposition reactors in space. Numerical simulations are invaluable tools for costly and difficult processes, such as those experiments designed for high pressures and microgravity conditions. Indium nitride is a candidate compound for high-speed laser and photo diodes for optical communication system, as well as for semiconductor lasers operating into the blue and ultraviolet regions. But InN and other nitride compounds exhibit large thermal decomposition at its optimum growth temperature. In addition, epitaxy at lower temperatures and subatmospheric pressures incorporates indium droplets into the InN films. However, surface stabilization data indicate that InN could be grown at 900 K in high nitrogen pressures, and microgravity could provide laminar flow conditions. Numerical models for chemical vapor deposition have been developed, coupling complex chemical kinetics with fluid dynamic properties.

Cardelino, Beatriz H.↗
NASA NTRS1998

Computational Nanoelectronics and Nanotechnology at NASA ARC

Both physical and economic considerations indicate that the scaling era of CMOS will run out of steam around the year 2010. However, physical laws also indicate that it is possible to compute at a rate of a billion times present speeds with the expenditure of only one Watt of electrical power. NASA has long-term needs where ultra-small semiconductor devices are needed for critical applications: high performance, low power, compact computers for intelligent autonomous vehicles and Petaflop computing technolpgy are some key examples. To advance the design, development, and production of future generation micro- and nano-devices, IT Modeling and Simulation Group has been started at NASA Ames with a goal to develop an integrated simulation environment that addresses problems related to nanoelectronics and molecular nanotecnology. Overview of nanoelectronics and nanotechnology research activities being carried out at Ames Research Center will be presented. We will also present the vision and the research objectives of the IT Modeling and Simulation Group including the applications of nanoelectronic based devices relevant to NASA missions.

Saini, Subhash↗
NASA NTRS2007

A Review of Hypersonics Aerodynamics, Aerothermodynamics and Plasmadynamics Activities within NASA's Fundamental Aeronautics Program

The research program of the aerodynamics, aerothermodynamics and plasmadynamics discipline of NASA's Hypersonic Project is reviewed. Details are provided for each of its three components: 1) development of physics-based models of non-equilibrium chemistry, surface catalytic effects, turbulence, transition and radiation; 2) development of advanced simulation tools to enable increased spatial and time accuracy, increased geometrical complexity, grid adaptation, increased physical-processes complexity, uncertainty quantification and error control; and 3) establishment of experimental databases from ground and flight experiments to develop better understanding of high-speed flows and to provide data to validate and guide the development of simulation tools.

Salas, Manuel D.↗