Search NASA⌕ Search

SEARCH · Search NASA

Results for “Compositional simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Strength characteristics and crack growth behavior of a composite with well aligned fibers

Continuous fiber composites have shown tremendous promise in industrial applications. Their microstructures, however, are very complex and in many instances difficult to characterize. In this project, the fracture characteristics of a specially made fiber reinforced composite with different fiber spacing are investigated. The experimental results so far have shown that after an initial transient phase the crack speed reaches a steady phase, i.e., independent of the crack length. Within the steady crack growth phase debonding along the fibers in the bridging zone grows in a self-similar manner. During the steady phase the energy dissipation per cycle is constant. Afterwards, an increase of the energy dissipation is observed that is accompanied by a decrease in crack speed. This latter trend is presumed to be the result of relatively large amounts of energy dissipated in the bulk of the specimen. Using appropriate Green's function and computer simulations, the stress intensity factor at the crack tip is evaluated for various cases of bridging stresses. In this way the effects of specimen size and fiber spacing on the overall fracture behavior of the composite system are analyzed. The steady crack speed and the steady rate of debonding have a similar power dependence on stress level. Dimensional analysis demonstrates that the particular fracture process is not governed by dimensional invariance but on the detailed micromechanisms in the bridging zone.

Botsis, John↗

Environmental exposure effects on composite materials for commercial aircraft

A study was conducted to determine the effects of long term flight and ground exposure on three commercially available graphite-epoxy material systems: T300/5208, T300/5209, and T300/934. Sets of specimens were exposed on commercial aircraft and ground racks for 1, 2, 3, 5, and 10 years. Inflight specimen sites included both the interior and exterior of aircraft based in Hawaii, Texas, and New Zealand. Ground racks were located at NASA-Dryden and the above mentioned states. Similar specimens were exposed to controlled lab conditions for up to 2 years. After each exposure, specimens were tested for residual strength and a dryout procedure was used to measure moisture content. Both room and high temperature residual strengths were measured and expressed as a pct. of the unexposed strength. Lab exposures included the effects of time alone, moisture, time on moist specimens, weatherometer, and simulated ground-air-ground cycling. Residual strengths of the long term specimens were compared with residual strengths of the lab specimens. Strength retention depended on the exposure condition and the material system. Results showed that composite materials can be successfully used on commercial aircraft if environmental effects are considered.

Hoffman, Daniel J.↗

Chemical Characterization and Reactivity Testing of Fuel-Oxidizer Reaction Product (Test Report)

The product of incomplete reaction of monomethylhydrazine (MMH) and nitrogen tetroxide (NTO) propellants, or fuel-oxidizer reaction product (FORP), has been hypothesized as a contributory cause of an anomaly which occurred in the chamber pressure (PC) transducer tube on the Reaction Control Subsystem (RCS) aft thruster 467 on flight STS-51. A small hole was found in the titanium-alloy PC tube at the first bend below the pressure transducer. It was surmised that the hole may have been caused by heat and pressure resulting from ignition of FORP. The NASA Johnson Space Center (JSC) White Sands Test Facility (WSTF) was requested to define the chemical characteristics of FORP, characterize its reactivity, and simulate the events in a controlled environment which may have lead to the Pc-tube failure. Samples of FORP were obtained from the gas-phase reaction of MMH with NTO under laboratory conditions, the pulsed firings of RCS thrusters with modified PC tubes using varied oxidizer or fuel lead times, and the nominal RCS thruster firings at WSTF and Kaiser-Marquardt. Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), accelerating rate calorimetry (ARC), ion chromatography (IC), inductively coupled plasma (ICP) spectrometry, thermogravimetric analysis (TGA) coupled to FTIR (TGA/FTIR), and mechanical impact testing were used to qualitatively and quantitatively characterize the chemical, thermal, and ignition properties of FORP. These studies showed that the composition of FORP is variable but falls within a limited range of compositions that depends on the fuel loxidizer ratio at the time of formation, composition of the post-formation atmosphere (reducing or oxidizing), and reaction or postreaction temperature. A typical composition contains methylhydrazinium nitrate (MMHN), ammonium nitrate (AN), methylammonium nitrate (MAN), and trace amounts of hydrazinium nitrate and 1,1-dimethylhydrazinium nitrate. The thermal decomposition reactions of FORP compositions used in this study were unremarkable, Neither the various compositions of FORP, the pure major components of FORP, nor mixtures of FORP with propellant-system corrosion products showed any unusual thermal activity when decomposed under laboratory conditions. Off-limit thruster operations were simulated by rapid mixing of liquid MMH and liquid NTO in a confined space. The test hardware was constructed with pressure- and temperature-measurement devices to determine if the expected fuel oxidizer reaction would result in increased energy release when FORP, FORP constituents, or propellant-system corrosion products were present. These tests demonstrated that FORP, MMHN, AN, or Inconel corrosion products can induce a mixture of MMH and NTO to produce component-damaging energies. The simulation-test program was not extensive enough to provide statistical probabilities for these events but did show that such events can occur. Damaging events required FORP or metal salts to be present at the initial mixing of MMH and NTO. Based on the results of these studies, it is suggested that removal or mitigation of a buildup of these materials may decrease the incidence of these high-energy, potentially damaging events.

Source record↗

Synthesis of Large Molecules in Cometary Ice Analogs: Physical Properties Related to Self-Assembly Processes

The combination of realistic laboratory simulations and infrared observations have revolutionized our understanding of interstellar dust and ice-the main component of comets. Since comets and carbonaceous micrometeorites may have been important sources of volatiles and carbon compounds on the early Earth, their organic composition may be related to the origin of life. Ices on grains in molecular clouds contain a variety of simple molecules. The D/H ratios of the comets Hale-Bopp and Hyakutake are consistent with a primarily interstellar ice mixture. Within the cloud and especially in the presolar nebula through the early solar system, these icy grains would have been photoprocessed by the ultraviolet producing more complex species such as hexamethylenetetramine, polyoxymethylenes, and simple keones. We reported at the 1999 Bioastronomy meeting laboratory simulations studied to identify the types of molecules which could have been generated in pre-cometary ices. Experiments were conducted by forming a realistic interstellar mixed-molecular ice (H2O, CH3OH, NH3 and CO) at approximately 10 K under high vacuum irradiated with UV light from a hydrogen plasma lamp. The gas mixture was typically 100:50:1:1, however when different ratios were used material with similar characteristics was still produced. The residue that remained after warming to room temperature was analyzed by HPLC, and by several mass spectrometric methods. This material contains a rich mixture of complex compounds with mass spectral profiles resembling those found in IDPs and meteorites. Surface tension measurements show that an amphiphilic component is also present. These species do not appear in various controls or in unphotolyzed samples. Residues from the simulations were also dispersed in aqueous media for microscopy. The organic material forms 10-40 gm diameter droplets that fluoresce at 300-450 nm under UV excitation. These droplets have a morphology and internal structure which appear strikingly similar to those produced by extracts of the Murchison meteorite. Together, these results suggest a link between organic material photochemically synthesized on the cold grains in dense, interstellar molecular clouds and compounds that may have contributed to the organic inventory of the primitive Earth. For example, the amphiphilic properties of such compounds permit self-assembly into the membranous boundary structures that required for the first forms of cellular life.

Dworkin, Jason P.↗

Computer modeling of thermoelectric generator performance

Features of the DEGRA 2 computer code for simulating the operations of a spacecraft thermoelectric generator are described. The code models the physical processes occurring during operation. Input variables include the thermoelectric couple geometry and composition, the thermoelectric materials' properties, interfaces and insulation in the thermopile, the heat source characteristics, mission trajectory, and generator electrical requirements. Time steps can be specified and sublimation of the leg and hot shoe is accounted for, as are shorts between legs. Calculations are performed for conduction, Peltier, Thomson, and Joule heating, the cold junction can be adjusted for solar radition, and the legs of the thermoelectric couple are segmented to enhance the approximation accuracy. A trial run covering 18 couple modules yielded data with 0.3% accuracy with regard to test data. The model has been successful with selenide materials, SiGe, and SiN4, with output of all critical operational variables.

Chmielewski, A. B.↗

Nonlinear response - A time domain approach

The present paper reviews the basic concepts of nonlinear response of panels to surface flow and acoustic pressures, simulation of random processes, time domain solutions and the Monte Carlo Method. Applications of this procedure to the orbit-on-demand space vehicles, acoustic fatigue and composite materials are discussed. Numerical examples are included for a variety of nonlinear problems to illustrate the applicability of this method.

Vaicaitis, R.↗

Lithologic mapping in a forested region using remotely sensed data

Forest canopies over different sedimentary lithologies of valleys and ridges are composed of different dominant species and have significantly different reflectance and emittance. In a botanical survey of eighty-seven forest sites, sedimentary lithologies were found to differ in the species which dominate the forest canopy. Sandstone sites had abundant chestnut oak (Quercus prinus), black oak (Q. velutina), and northern red oak (Q. rubra). On shale sites chestnut oak, white oak (Q. alba), northern red oak and red pine (Pinus resinosa) were dominant. Limestone sites had a variable species composition with the most common species, northern red oak, white oak, and black locust (Robinia pseudocacia) accounting for only 30 percent of the total trees. Thematic Mapper Simulator (TMS) data obtained during the growing season were analyzed to determine if sandstones, shales, and limestones could be distinguished on the basis of forest-canopy reflectance. The observations compared in the analysis were means of the eight TMS bands for 10 x 10-pixel test sites selected from areas with complete canopy closure. In August imagery the three lithologies were separable based on differences in TMS band 3 (630-690 nm) and band 8 (10.4-12.5 microns).

Masuoka, E.↗

Simulating the cooling of an immiscible alloy

A computer program to simulate the cooling of immiscible alloys is described, and the Pb-Zn system is presented as an example. The program permits the user to calculate various compositions of immiscible alloys. Illustrations are presented which depict the sequence of computer-monitor displays generated by the program.

Probst, H. B.↗

The effects of atomic oxygen on polymeric materials

At the altitudes of low-earth orbit (LEO), atomic oxygen (AO) is the most abundant chemical species. This strong oxidizing agent reacts with virtually any organic material that is not already fully oxidized. Erosion by AO can be extensive and jeopardizes any protective coatings, thermal blankets, adhesives, and structural composites exposed on the exterior of satellites in LEO. Researchers prepared and tested organic materials for their susceptibility to AO using a commercial plasma asher which approximately simulates the oxygen effects in LEO. Experiments were performed on a polyimide, a polysulfone, and two epoxy adhesives into which low molecular-weight additives have been dissolved. Incorporated in the molecular structure of these additives are elements such as silicon whose nonvolatile oxides, which are formed on exposure to AO, remain as a coating on the surface to create a barrier between the remainder of the organic material and the AO. We find that the additives protect the materials, but the low solubility of some limit their utility. Concurrent studies are underway to measure the effect of the additives on the thermal expansion coefficients of the materials. Tows of aramid fibers, which are important components in the proposed tether satellite systems, have been eroded in the asher. The results which show that the square root of the mass remaining decreases linearly with the time of exposure (see the figure) are consistent with a constant rate of surface erosion. The tensile strength of these eroded tows decreases with time of exposure also; additional measurements are in progress.

Orwoll, Robert A.↗

Generation of three-dimensional body-fitted grids by solving hyperbolic and parabolic partial differential equations

Hyperbolic grid generation procedures are described which have been used in external flow simulations about complex configurations. For many practical applications a single well-ordered (i.e., structured) grid can be used to mesh an entire configuration, in other problems, composite or unstructured grid procedures are needed. Although the hyperbolic partial differential equation grid generation procedure has mainly been utilized to generate structured grids, extension of the procedure to semiunstructured grids is briefly described. Extensions of the methodology are also described using two-dimensional equations.

Steger, Joseph L.↗

Generation of three-dimensional body-fitted grids by solving hyperbolic partial differential equations

Hyperbolic grid generation procedures are described which have been used in external flow simulations about complex configurations. For many practical applications a single well-ordered (i.e., structured) grid can be used to mesh an entire configuration, in other problems, composite or unstructured grid procedures are needed. Although the hyperbolic partial differential equation grid generation procedure has mainly been utilized to generate structured grids, an extension of the procedure to semiunstructured grids is briefly described. Extensions of the methodology are also described using two-dimensional equations.

Steger, Joseph L.↗

Development Of Composite Panels For Telescope Mirrors

Report describes continuing program for development of lightweight hexagonal graphite/epoxy composite panels intended to support precisely curved mirror surfaces assembled into large telescope mirror. Discusses development requirements, technical decisions, fabrication methods, measurements of properties of materials, analytical simulation, and thermal vacuum testing. Telescope flown in orbit around Earth to observe at wavelengths down to 30 micrometers.

Freeland, Robert E.↗

A macro-micromechanics analysis of a notched metal matrix composite

Macro- and micromechanics analysis were conducted to determine the matrix and fiber behaviors near the notch in a center-notched metal-matrix composite. In this approach, the macrolevel analysis models the entire notched specimen using a 3D finite element program that uses the vanishing-fiber-diameter model to simulate the elastic-plastic behavior of the matrix and the elastic behavior of the fiber. The microlevel behavior is analyzed using a discrete fiber-matrix model containing one fiber and the surrounding matrix. The viability of this analysis is demonstrated using results for a boron/aluminum monolayer.

Bigelow, Catherine A.↗

Noise transmission properties and control strategies for composite structures

A study of several component technologies required to apply active control techniques to reduce interior noise in composite aircraft structures is described. The mechanisms of noise transmission in an all composite, large-scale, fuselage model are studied in an experimental program and found similar to mechanisms found in conventional aircraft construction. Two primary conditions of structural acoustic response are found to account for the dominant interior acoustic response. A preliminary study of active noise control in cylinders used piezoceramic actuators as force inputs for a simple aluminum fuselage model. These actuators provided effective control for the same two conditions of noise transmission found in the composite fuselage structure. The use of piezoceramic actuators to apply force inputs overcomes the weight and structural requirements of conventional shaker actuators. Finally, in order to accurately simulate these types of actuators in a cylindrical shell, two analytical models are investigated that apply either in-plane forces or bending moments along the boundaries of a finite patch. It is shown that the bending model may not be as effective as the force model for exciting the low order azimuthal modes that typically dominate the structural acoustic response in these systems. This result will affect the arrangement and distribution of actuators required for effective active control systems.

Silcox, Richard J.↗

Recondensation in the early solar system: Physical conditions and source material

Many physical processes in the solar nebula led to fractionation of the gaseous phase of the preplanetary material. Some of these processes are listed with corresponding type of fractionation in terms of Rock/Ice/Gas. Recondensation from fractionated gas phase yields different compositions of condensates. In some detail, one type of fractionation is considered: impact heating with evaporation and subsequent recondensation of material during intercollisions of planetesimals. For thermodynamical simulation of recondensation in such a process one needs (1) P-T parameters and (2) some initial source material to be heated, evaporated, and recondensed. These two problems are addressed.

Vityazev, A. V.↗

Development of a nondestructive vibration technique for bond assessment of Space Shuttle tiles

This final report describes the achievements of the above titled project. The project is funded by NASA-KSC (Grant No. NAG 10-0117) for the period of 1 Jan. to 31 Dec. 1993. The purpose of this project was to develop a nondestructive, noncontact technique based on 'vibration signature' of tile systems to quantify the bond conditions of the thermal protection system) tiles of Space Shuttle orbiters. The technique uses a laser rapid scan system, modal measurements, and finite element modeling. Finite element models were developed for tiles bonded to both clamped and deformable integrated skin-stringer orbiter mid-fuselage. Results showed that the size and location of a disbonded tile can be determined from frequency and mode shape information. Moreover, a frequency response survey was used to quickly identify the disbonded tiles. The finite element results were compared with experimentally determined frequency responses of a 17-tile test panel, where a rapidscan laser system was employed. An excellent degree of correlation between the mathematical simulation and experimental results was realized. An inverse solution for single-tile assemblies was also derived and is being implemented into a computer program that can interact with the modal testing software. The output of the program displays the size and location of disbond. This program has been tested with simulated input (i.e., finite element data), and excellent agreement between predicted and simulated disbonds was shown. Finally, laser vibration imaging and acoustic emission techniques were shown to be well suited for detecting and monitoring the progressive damage in Graphite/Epoxy composite materials.

Moslehy, Faissal A.↗

Studies of plasma flow past Jupiter's satellite Io

We have investigated the interaction of Io, Jupiter's innermost Galilean satellite, with the Io plasma torus. The interaction of Io with the plasma surrounding it has been a subject of interest for almost 30 years, dating from the discovery by Bigg (1964) that radio emissions from the Jovian magnetosphere are controlled by Io's position. Since that time, both ground-based and spacecraft observations have shown that Io is a unique satellite that influences the Jovian magnetosphere in important ways. In particular, material from Io is a major source of plasma for the magnetosphere, and the energy that this plasma harnesses from Jupiter's co-rotating magnetic field is an important power source for the magnetosphere. It is apparent that the local interaction of the torus plasma with Io plays a key role in the formation, composition, and energetics of the Io torus; the interaction is also highly nonlinear. We have modeled this interaction using time-dependent three-dimensional magnetohydrodynamic (MHD) simulations. During this past year, we have used NASA support to develop a new MHD code to study the interaction. As part of the Galileo spacecraft's recent successful insertion into orbit around Jupiter, the spacecraft passed within 900 km of Io's surface. Our calculations have focused on using Galileo particles and fields data to examine a question that was not resolved by the Voyager observations: Does Io have an intrinsic magnetic field? In this progress summary, we describe our efforts on this problem to date.

Linker, Jon↗

Probabilistic Micromechanics and Macromechanics for Ceramic Matrix Composites

The properties of ceramic matrix composites (CMC's) are known to display a considerable amount of scatter due to variations in fiber/matrix properties, interphase properties, interphase bonding, amount of matrix voids, and many geometry- or fabrication-related parameters, such as ply thickness and ply orientation. This paper summarizes preliminary studies in which formal probabilistic descriptions of the material-behavior- and fabrication-related parameters were incorporated into micromechanics and macromechanics for CMC'S. In this process two existing methodologies, namely CMC micromechanics and macromechanics analysis and a fast probability integration (FPI) technique are synergistically coupled to obtain the probabilistic composite behavior or response. Preliminary results in the form of cumulative probability distributions and information on the probability sensitivities of the response to primitive variables for a unidirectional silicon carbide/reaction-bonded silicon nitride (SiC/RBSN) CMC are presented. The cumulative distribution functions are computed for composite moduli, thermal expansion coefficients, thermal conductivities, and longitudinal tensile strength at room temperature. The variations in the constituent properties that directly affect these composite properties are accounted for via assumed probabilistic distributions. Collectively, the results show that the present technique provides valuable information about the composite properties and sensitivity factors, which is useful to design or test engineers. Furthermore, the present methodology is computationally more efficient than a standard Monte-Carlo simulation technique; and the agreement between the two solutions is excellent, as shown via select examples.

Murthy, Pappu L. N.↗