Search NASA⌕ Search

SEARCH · Search NASA

Results for “Computer code”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

NASCAP, a three-dimensional Charging Analyzer Program for complex spacecraft

A computer code, NASCAP (NASA Charging Analyzer Program), has been developed by Systems, Science and Software under contract to NASA-LeRC to simulate the charging of a complex spacecraft in geosynchronous orbit. The capabilities of the NASCAP code include a fully three-dimensional solution of Poisson's equation about an object having considerable geometrical and material complexity, particle tracking, shadowing in sunlight, calculation of secondary emission, backscatter and photoemission, and graphical output. A model calculation shows how the NASCAP code may be used to improve our understanding of the spacecraft-plasma interaction.

Katz, I.↗
NASA NTRS1978

A hydrodynamic study of a slow nova outburst

The paper reports use of a Lagrangian implicit hydrodynamics computer code incorporating a full nuclear-reaction network to follow a thermonuclear runaway in the hydrogen-rich envelope of a 1.25 solar-mass white dwarf. In this evolutionary sequence the envelope was assumed to be of normal (solar) composition and the resulting outburst closely resembles that of the slow nova HR Del. In contrast, previous CNO-enhanced models resemble fast nova outbursts. The slow-nova model ejects material by radiation pressure when the high luminosity of the rekindled hydrogen shell source exceeds the local Eddington luminosity of the outer layers. This is in contrast to the fast nova outburst where ejection is caused by the decay of the beta(+)-unstable nuclei. Nevertheless, radiation pressure probably plays a major role in ejecting material from the fast nova remnants. Therefore, the sequence from slow to fast novae can be interpreted as a sequence of white dwarfs with increasing amounts of enhanced CNO nuclei in their hydrogen envelopes, although other parameters such as the white-dwarf mass and accretion rate probably contribute to the observed variation between novae.

Sparks, W. M.↗
NASA NTRS1978

Properties of the clouds of Venus, as inferred from airborne observations of its near-infrared reflectivity spectrum

The shape and absolute value of Venus' reflectivity spectrum is measured in the 1.2- to 4.0 micrometer spectral region with a circular variable filter wheel spectrometer having a spectral resolution of 1.5%. Comparing these spectra with synthetic spectra generated with a multiple-scattering computer code, a number of properties of the Venus clouds are inferred. Evidence is obtained indicating that the clouds are made of a water solution of sulfuric acid in their top unit optical depth, and that the clouds are made of this material down to an optical depth of at least 25. In addition, the acid concentration is 84 plus or minus 2% H2SO4 by weight in the top unit optical depth, the total optical depth of the clouds is 37.5 plus or minus 12.5, and the cross-sectional weighted mean particle radius lies between 0.5 and 1.4 micrometers in the top unit optical depth of the clouds. It is found that the average volume mixing ratio of H2SO4 and H2O contained in the cloud material both equal approximately 2 x 10 to the -6. Employing vapor pressure arguments, the acid concentration is shown to equal 84 plus or minus 6% at the cloud bottom and the water vapor mixing ratio beneath the clouds lies between 6 x 10 to the -4 and 10 to the -2.

Pollack, J. B.↗
NASA NTRS1978

The artificial compression method for computation of shocks and contact discontinuities. III - Self-adjusting hybrid schemes

This paper presents a new computational method for the calculation of discontinuous solutions of hyperbolic systems of conservation laws, which deal effectively with both shock and contact discontinuities. The method consists of two stages: in the first stage a standard finite-difference scheme is hybridized with a nonoscillatory first order accurate method to provide for the monotonic variation of the solution near discontinuities, and in the second stage artificial compression is applied to sharpen transitions at discontinuities. This modification of a standard finite-difference method results in a scheme which preserves the order of truncation error of the original method and yet yields a sharp and oscillation free transition for both shocks and contact discontinuities. The modification can be easily implemented in existing computer codes.

Harten, A.↗
NASA NTRS1978

Carbonaceous materials subjected to extreme heating - A comparison of numerical simulation and experiments

The ablation of carbonaceous materials in a hydrogen-helium stream has been simulated using a charring materials ablator computer code. These results are compared with the first ablation data to be obtained from the Ames-NASA Giant Planet Pilot Facility. Test stream diagnostics and ablation effects on convective and radiative heat transfer are discussed since these parameters constitute important input data to the numerical simulation. Graphite ablation was predicted to within 10 to 20%, and carbon-phenolic somewhat less accurately.

Davy, W. C.↗
NASA NTRS1978

Time-domain Green's Function Method for three-dimensional nonlinear subsonic flows

The Green's Function Method for linearized 3D unsteady potential flow (embedded in the computer code SOUSSA P) is extended to include the time-domain analysis as well as the nonlinear term retained in the transonic small disturbance equation. The differential-delay equations in time, as obtained by applying the Green's Function Method (in a generalized sense) and the finite-element technique to the transonic equation, are solved directly in the time domain. Comparisons are made with both linearized frequency-domain calculations and existing nonlinear results.

Tseng, K.↗
NASA NTRS1978

Interpolation and extrapolation of creep rupture data by the minimum commitment method. II - Oblique translation

An outline is presented of a new procedure, termed the oblique translation method, which emerged in the development of the focal point convergence method. Approaches for implementing the oblique translation method are discussed. It is shown that the new method is essentially a minimum commitment method when manually-graphically implemented, in the sense that the form of the functions involved are not forced into particular analytical forms. The individual constants and functions are independently determined. The minimum commitment concept is extended to the analysis of creep rupture data wherein each isothermal is to be generated by an oblique translation of the 'master curve' when plotted. Attention is given to a manual-graphical analysis, the preassessment of data, and an analysis by computer code.

Manson, S. S.↗
NASA NTRS1978

Interpolation and extrapolation of creep rupture data by the minimum commitment method. I - Focal-point convergence

The minimum commitment method has been applied to the analysis of creep-rupture data. The method is based on a parameter representing the focal point of convergence of all isothermals when extended to the long or short times necessary for such convergence to occur. The technique may be applied by manual-graphic analysis on computer code. It is illustrated for the nickel-base alloy Astroloy.

Manson, S. S.↗
NASA NTRS1978

Nonlinear behavior of circular plates with work hardening

Tests were performed on two simply supported plates of aluminum alloy 2024-0, under a central concentrated load, with peak deflections up to 2.6 times the thickness. The load was provided by a small-diameter hard-steel rod. The plates had diameter-to-thickness ratios (D/h) of 20 and 41. Measurements were made of load, deflections and strains; membrane and bending strains were calculated from the test data. The test data are presented in comparison with theoretical predictions generated by the finite-element-computer code PLANS, which includes material and geometric nonlinearities. The theoretical prediction was excellent for deflections, and generally good for strains, when the central force was represented by a line load around the loading rod's contact circle.

Winter, R.↗
NASA NTRS1975

Solar-wind and solar-flare maturation of the lunar regolith

Detailed predictions concerning the depth and time-dependent accumulation of solar-wind effects and solar-flare tracks in lunar dust grains were obtained by use of an adaptation of a Monte Carlo soil-mixing computer code described by Duraud et al. (1975). The predictions are compared to experimental measurements obtained by analyzing lunar dust grains as well as artificially irradiated minerals by a variety of techniques. A study of amorphous coatings of solar-wind radiation-damaged material on certain lunar grains sets limits on the integrated residence time of these grains in the ancient solar wind. Other topics discussed include solar wind maturation, the peculiar shape of the experimental distribution of central track densities in 50-micron grains, and the interpretation of both track gradients in 50-micron feldspars and the relatively 'low' concentration of solar-wind species implanted in ilmenite grains.

Bibring, J. P.↗
NASA NTRS1977

Computer simulation of hypersonic flow over the Space Shuttle Orbiter

Computer simulations of the flow field around the Space Shuttle Orbiter are described. Results of inviscid calculations are presented for the shock wave pattern and bottom centerline pressure distribution at 30 deg angle of attack. Results of viscous calculations are presented for wall pressure and heat transfer distributions for simple configurations representative of regions where shock wave-boundary layer interactions occur. The computer codes are verified by comparisons with wind-tunnel data and can be applied to flight conditions.

Inouye, M.↗
NASA NTRS1978

Sonic-box method employing local Mach number for oscillating wings with thickness

A computer program was developed to account approximately for the effects of finite wing thickness in the transonic potential flow over an oscillating wing of finite span. The program is based on the original sonic-box program for planar wing which was previously extended to include the effects of the swept trailing edge and the thickness of the wing. Account for the nonuniform flow caused by finite thickness is made by application of the local linearization concept. The thickness effect, expressed in terms of the local Mach number, is included in the basic solution to replace the coordinate transformation method used in the earlier work. Calculations were made for a delta wing and a rectangular wing performing plunge and pitch oscillations, and the results were compared with those obtained from other methods. An input quide and a complete listing of the computer code are presented.

Ruo, S. Y.↗
NASA NTRS1978

A three-dimensional turbulent compressible flow model for ejector and fluted mixers

A three dimensional finite element computer code was developed to analyze ejector and axisymmetric fluted mixer systems whose flow fields are not significantly influenced by streamwise diffusion effects. A two equation turbulence model was used to make comparisons between theory and data for various flow fields which are components of the ejector system, i.e., (1) turbulent boundary layer in a duct; (2) rectangular nozzle (free jet); (3) axisymmetric nozzle (free jet); (4) hypermixing nozzle (free jet); and (5) plane wall jet. Likewise, comparisons of the code with analytical results and/or other numerical solutions were made for components of the axisymmetric fluted mixer system. These included: (1) developing pipe flow; (2) developing flow in an annular pipe; (3) developing flow in an axisymmetric pipe with conical center body and no fluting and (4) developing fluted pipe flow. Finally, two demonstration cases are presented which show the code's ability to analyze both the ejector and axisymmetric fluted mixers.

Rushmore, W. L.↗
NASA NTRS1979

Prediction of properties of intraply hybrid composites

Equations based on the mixtures rule are presented for predicting the physical, thermal, hygral, and mechanical properties of unidirectional intraply hybrid composites (UIHC) from the corresponding properties of their constituent composites. Bounds were derived for uniaxial longitudinal strengths, tension, compression, and flexure of UIHC. The equations predict shear and flexural properties which agree with experimental data from UIHC. Use of these equations in a composites mechanics computer code predicted flexural moduli which agree with experimental data from various intraply hybrid angleplied laminates (IHAL). It is indicated, briefly, how these equations can be used in conjunction with composite mechanics and structural analysis during the analysis/design process.

Chamis, C. C.↗
NASA NTRS1978

User's guide to computer programs JET 5A and CIVM-JET 5B to calculate the large elastic-plastic dynamically-induced deformations of multilayer partial and/or complete structural rings

These structural ring deflections lie essentially in one plane and, hence, are called two-dimensional (2-d). The structural rings may be complete or partial; the former may be regarded as representing a fragment containment ring while the latter may be viewed as a 2-d fragment-deflector structure. These two types of rings may be either free or supported in various ways (pinned-fixed, locally clamped, elastic-foundation supported, mounting-bracket supported, etc.). The initial geometry of each ring may be circular or arbitrarily curved; uniform-thickness or variable-thickness rings may be analyzed. Strain-hardening and strain-rate effects of initially-isotropic material are taken into account. An approximate analysis utilizing kinetic energy and momentum conservation relations is used to predict the after-impact velocities of each fragment and of the impact-affected region of the ring; this procedure is termed the collision-imparted velocity method (CIVM) and is used in the CIVM-JET 5 B program. This imparted-velocity information is used in conjunction with a finite-element structural response computation code to predict the transient, large-deflection, elastic-plastic responses of the ring. Similarly, the equations of motion of each fragment are solved in small steps in time. Provisions are made in the CIVM-JET 5B code to analyze structural ring response to impact attack by from 1 to 3 fragments, each with its own size, mass, translational velocity components, and rotational velocity. The effects of friction between each fragment and the impacted ring are included.

Wu, R. W. H.↗
NASA NTRS1979

Elementary analytic models of climate. 1: The mean global heat balance

Climate models based on global radiative equilibrium are normally so complicated that they require extensive computer codes to provide adequate accuracy. However, by simply modifying the concept of a gray atmosphere, a reasonably correct mean global temperature is obtained. This elementary model is then used to estimate the effects of changes in the abundances of minor infrared absorbers and changes in the solar constant or earth albedo. When applied to a Budyko-Sellers zonally averaged model, the quasi-gray model could give a physical basis for the latitude dependence of outgoing radiation and of opacity due to H2O vapor content. The latter effect constitutes an important positive feedback on surface temperature.

Chamberlain, J. W.↗
NASA NTRS1979

Wake curvature and trailing edge interaction effects in viscous flow over airfoils

A theory developed for analyzing viscous flows over airfoils at high Reynolds numbers is described. The theory includes a complete treatment of viscous interaction effects induced by the curved wake behind the airfoil and accounts for normal pressure gradients across the boundary layer in the trailing edge region. A brief description of a computer code that was developed to solve the extended viscous interaction equations is given. Comparisons of the theoretical results with wind tunnel data for two rear loaded airfoils at supercritical conditions are presented.

Melnik, R. E.↗
NASA NTRS1979

Preliminary noise tradeoff study of a Mach 2.7 cruise aircraft

NASA computer codes in the areas of preliminary sizing and enroute performance, takeoff and landing performance, aircraft noise prediction, and economics were used in a preliminary noise tradeoff study for a Mach 2.7 design supersonic cruise concept. Aerodynamic configuration data were based on wind-tunnel model tests and related analyses. Aircraft structural characteristics and weight were based on advanced structural design methodologies, assuming conventional titanium technology. The most advanced noise prediction techniques available were used, and aircraft operating costs were estimated using accepted industry methods. The 4-engines cycles included in the study were based on assumed 1985 technology levels. Propulsion data was provided by aircraft manufacturers. Additional empirical data is needed to define both noise reduction features and other operating characteristics of all engine cycles under study. Data on VCE design parameters, coannular nozzle inverted flow noise reduction and advanced mechanical suppressors are urgently needed to reduce the present uncertainties in studies of this type.

Mascitti, V. R.↗