Search NASA⌕ Search

SEARCH · Search NASA

Results for “Control Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Chabazite Zeolite Membranes for Krypton/Xenon Separation: Control of Membrane Properties and Process Modeling

Nuclear energy is considered to be a clean and economical means of carbon-free energy. As part of the overall process for recycling used nuclear fuel (UNF), it is necessary to develop technologies to separate the off-gases formed during the fission of uranium and plutonium in nuclear power reactors. The off-gas stream is generated during the shearing and chopping, voloxidation, and acid dissolution steps, and would have a flow rate of ∼2500 L/min assuming a typical 800 tons heavy metal/yr reprocessing facility. Kr separation from Xe is one of the steps in a proposed UNF off-gas processing flowsheet. The Kr/Xe mixture is approximately 10/90 by volume and hence the separation of Kr would reduce the volume of radioactive {sup 85}Kr waste by a factor of 10. Kr/Xe separation is challenging since they are both chemically inert species and physically very similar (0.036 nm size difference). There is no existing process for this separation that is suitable for use in UNF recycling since conventional cryogenic distillation requires highly intensive power and large system volume. Membrane-based separation using radiation-stable materials such as zeolites could be an attractive separation method, if membranes with sufficient Kr flux and selectivity can be fabricated. Zeolite membranes offer an opportunity to exploit the size difference of Kr (kinetic diameter 0.36 nm) and Xe (0.396 nm) to achieve preferential permeation of the minority component (Kr) from the mixture, leading to an efficient separation with very low energy requirements. An ideal membrane process would permeate a stream of pure Kr for storage and also produce pure Xe which has commercial value (> $8000/kg at 99+% purity). SAPO-34 is a silico-alumino-phosphate zeolite molecular sieve with CHA framework topology and containing uniform micropores (0.38 nm), intermediate in size between the kinetic diameters of Kr and Xe. It was hypothesized that SAPO-34 membranes can separate krypton and xenon by diffusivity differences. Previously we fabricated SAPO-34 membranes and showed that they are capable of separating Kr from Xe. Our previous work also indicated that there is much potential for engineering the separation properties of these membranes with a view to improving permeance and selectivity and evaluating the expected process performance. The main objectives of the present study are: 1) development of SAPO-34 membranes with enhanced membrane performance via thickness reduction and ion exchange, and 2) process modeling for technic-economic analysis of zeolite membrane systems for Kr/Xe separation.

36 MATERIALS SCIENCE↗

Analysis of Slow Spill Data for the Mu2e Experiment

The execution of the Mu2e experiment requires a stable, low-intensity proton beam from the Delivery Ring to produce clean data and protect equipment. This is done by performing a “slow extraction,” which is the gradual contraction of the stable region within the accelerator’s beam pipe. The Delivery Ring is currently unable to perform slow extraction with the stability required by Mu2e. To resolve this, the FAN-C team is training machine learning models with the purpose of replacing the Delivery Ring’s current PID controllers with AI-powered controllers. Training these models requires clean, processed data from slow spills. Over the course of this project, data from previous slow spills were processed and analyzed, and the clean data, graphs, and insights gained from the process were provided to the FAN-C team to assist them in their efforts.

Osborn, Thomas [Purdue U., West Lafayette]↗

Multiphysics Pebble-Bed Reactor Control Rod Withdrawal Study

This work studied the responses of both a generic gas- and a fluoride-cooled PBR concept---the gPBR-200 and gFHR, respectively---during reactivity insertion accidents. Both models rely on 2-D axisymmetric simulations to solve the neutron flux distribution, nuclide concentrations, and temperature across the core---in addition to numerous representative pebble and TRISO particle simulations for determining fuel and moderator temperatures. This not only allows for computing maximum temperatures in the core---thus enabling estimation of how near the fuel is to peak operational and safety limits---as prescribed by specified acceptable fuel design limits, which are determined in such a way that fuel is not damaged during operational or anticipated abnormal occurrences---but also predicting how much of the core exceeds a given temperature limit, as well as determining the local energy deposition rate. These models consider both control rod withdrawal and ejection events. The former introduces a great deal more reactivity, as all the control rods are withdrawn (as opposed to a single one in the latter case), though at a much slower pace. In addition, for the gPBR-200, two limiting cases were considered: one with the core starting under hot full-power conditions and one with it starting under cold zero-power conditions. While the amount of reactivity added in the latter case is much higher (due to the far lower temperatures and the lack of neutron poisons such as Xe-135), the margin to temperature limits is also much more significant. Overall, for the design considered, none of the accidents resulted in the maximum fuel temperature reaching values close to the TRISO limit. However, the methodology presented herein could be very relevant if some designs consider reduced margins (e.g., higher temperatures) to achieve enhanced economics. Further model improvement is needed to better capture control rod worth, both in terms of cusping effects (as the rods are slowly withdrawn) and differential worth, especially as the tips of the rods near the upper cavity.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Development of Data-Driven Models for Performance Prediction and Chemical Dosing of a Full-Scale Controlled Phosphorus Precipitation Reactor

This study evaluated the use of data-driven models to improve control of a struvite precipitation reactor that removes phosphorus from wastewater while producing a fertilizer product. The researchers developed predictive models for influent orthophosphate concentration, effluent orthophosphate concentration, and phosphorus removal using operational data from a full-scale MagPrex™ reactor at a water resource recovery facility in Denver, Colorado. Model predictions were used to recommend magnesium chloride dosing adjustments needed to achieve a target effluent phosphorus concentration. Several machine learning approaches were tested, with ridge regression providing the best predictions for influent orthophosphate concentration and phosphorus removal, and XGBoost providing the best predictions for effluent orthophosphate concentration. Simulation results indicated that the decision-support approach could correctly identify dosing adjustments in most cases and reduce chemical use. Full-scale implementation achieved lower accuracy due to changing operating conditions and limited historical data in some operating ranges. Here, the results demonstrate the potential of data-driven tools to support phosphorus recovery process control while also identifying practical limitations that affect deployment in full-scale systems.

42 ENGINEERING↗

Development of an Optimal Variable-Pitch Controller for Floating Axial-Flow Marine Hydrokinetic Turbines

This article discusses the development of an optimal variable-pitch controller for floating, axial-flow marine turbines. Recently, OpenFAST, an open-source wind turbine modeling tool, has been extended to model marine turbines. A controller is necessary to simulate marine turbines for different load cases using OpenFAST, which greatly impacts the performance of the energy system. Previous studies have designed controllers using a linearized model of the marine turbine, which can be time-consuming and require the expertise of a control engineer. In this study, we use an automated approach that uses generic models of the marine turbine to identify the controller gains, which can expedite the process of designing a controller. Using an optimizer to identify the control system parameters can additionally improve the controller's performance. The optimal controller tuned using such an approach results in a 20% reduction in the tower-base damage equivalent loading and better tracking of the rated generator speed and power.

axial flow↗

Development of an Optimal Variable-Pitch Controller for Floating Axial-Flow Marine Hydrokinetic Turbines: Preprint

This article discusses the development of an optimal variable-pitch controller for floating, axial-flow marine turbines. Recently, OpenFAST, an open-source wind turbine modeling tool, has been extended to model marine turbines. A controller is necessary to simulate marine turbines for different load cases using OpenFAST, which greatly impacts the performance of the energy system. Previous studies have designed controllers using a linearized model of the marine turbine, which can be timeconsuming and require the expertise of a control engineer. In this study, we use an automated approach that uses generic models of the marine turbine to identify the controller gains, which can expedite the process of designing a controller. Using an optimizer to identify the control system parameters can additionally improve the controller's performance. The optimal controller tuned using such an approach results in a 20% reduction in the towerbase damage equivalent loading and better tracking of the rated generator speed and power.

closed-loop control↗

Synchronous Machine Governor Upgrade

Conventional generation sources play a critical role in the stability and reliability of the electrical grid, particularly as we transition towards more renewable energy sources. To understand and accurately emulate their behavior for optimizing grid operations and ensuring seamless integration with renewable technologies, it is essential to better emulate the grid- and plant-level impacts of conventional generation sources, such as natural gas (NG) driven heat recovery steam generators (HRSGs) and combustion turbines (CTs). Therefore, a governor model is developed in a programmable logic controller (PLC) to investigate the performance of the conventional generator under various dynamic operating conditions and to identify the impact on grid stability in a controlled environment. The governor model aims to enable the hardware-in-the-loop (HIL) based emulation of these conventional generation sources using the existing 2 MVA synchronous machine/generator that is driven by a flexible 2.5 MW variable speed drive. This setup will allow us to replicate the dynamic characteristics and response behaviors of NG-driven HRSGs and CTs. The controls for the emulated conventional plants follow the industry standard and are adjustable, ensuring they accurately reflect the operational capabilities and limitations of real-world systems. These controls include load-following capabilities, ramp rates, startup and shutdown sequences, and emissions characteristics. By incorporating these adjustable controls, we aim to capture the nuanced impacts of conventional generation, such as their ability to provide ancillary services like frequency regulation, voltage support, and spinning reserve. In this report, we simulate two types of dynamic operations: grid-connected and islanding. For each dynamic operation, representative starting sequences are tested, including turbine purge, ignition, speed ramping up, generator excitation and synchronizing, and breaker close. The HIL based tests provides insights for field deployment, specifically the high-fidelity governor model provides results to predict the potential stability and reliability risk and suggest possible integration measures (e.g., generation and load balancing, tuning of governor control parameters). Ultimately, this enhanced emulation capability will be integrated into our Advanced Research on Integrated Energy Systems (ARIES), enabling us to conduct comprehensive studies on the interactions between conventional and renewable energy sources. By better understanding these interactions, we can develop strategies to optimize the overall performance and reliability of the grid. This will support the deployment of advanced grid management techniques, such as demand response, grid-forming inverters, and energy storage systems. The main contributions are summarized as follows: (1) This report introduces a PLC-based governor model for gas turbines. This model accurately simulates the dynamic behavior of conventional generation sources under various operational scenarios; (2) The model is integrated with an HIL testbed that includes a 2.5 MW variable speed drive and a 2 MVA synchronous machine. This setup enables realistic, real-time emulation of conventional power plants, particularly NG driven HRSGs and CTs; (3) The developed model is adaptable to various gas turbine configurations and allows for precise control over parameters such as MW ramp rates. This flexibility makes it a valuable tool for future research and industry collaboration; and (4) By incorporating the model into the National Renewable Energy Laboratory's Advanced Research on Integrated Energy Systems, the report lays the groundwork for future studies on interactions between conventional and renewable energy sources, enhancing the ability to develop advanced grid management strategies.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A comparison of WEC control strategies

The operation of Wave Energy Converter (WEC) devices can pose many challenging problems to the Water Power Community. A key research question is how to significantly improve the performance of these WEC devices through improving the control system design. This report summarizes an effort to analyze and improve the performance of WEC through the design and implementation of control systems. Controllers were selected to span the WEC control design space with the aim of building a more comprehensive understanding of different controller capabilities and requirements. To design and evaluate these control strategies, a model scale test-bed WEC was designed for both numerical and experimental testing (see Section 1.1). Seven control strategies have been developed and applied on a numerical model of the selected WEC. This model is capable of performing at a range of levels, spanning from a fully-linear realization to varying levels of nonlinearity. The details of this model and its ongoing development are described in Section 1.2.

30 DIRECT ENERGY CONVERSION↗

Application of periodic perturbations to a RELAP5 hydraulic simulation to determine frequency response

Time series analysis requires a collection of data taken sequentially in time to apply techniques for identification, modeling, prediction or control purposes. Some systems operating at steady state are perturbed with white noise to extract system information using autoregressive models or spectral analysis, and then the dynamic response is used to assess system properties. If it is not possible to perturb the physical system, a mathematical model can be used to work with and study the perturbation effect. In this work, the system object of perturbation study is a RELAP5 hydraulic model, and since the excitation with a white noise sequence is not readily implementable, an alternative is proposed to apply a series of periodic steps in a square wave pattern. With this periodic excitation, the output of a RELAP5 model for a hydraulic piping system can be analyzed with frequency domain tools. The piping systems can be found in the balance of plant of a steam power plant, and the aim of this work is to explore the capability of RELAP5 to determine system frequency characteristics linked to mechanical vibration in operating lines of a power plant. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Device Design and Periodic Motion Control of an Ocean Kite System for Hydrokinetic Energy Harvesting (Final Technical Report)

This project focused on the modeling, device design, control system design, and progressive experimental validation of an energy-harvesting underwater kite harvesting energy through cyclic spooling motion. This adds to the portfolio of the DoE Water Power Technologies Office has resulted in several key outcomes that will further the development of energy-harvesting kites, as detailed in the report.

16 TIDAL AND WAVE POWER↗

Pulsed High Temperature Superconducting Central Solenoid Model Coil for Plasma Current Drive and Control in High-Field Compact Commercial Fusion Power Plants (CRADA Final Report)

This ARPA-E BETHE project was aimed to design, build and test a fast-ramping HighTemperature Superconducting (HTS) Central Solenoid Model Coil (CSMC) that significantly derisks a full-size HTS Central Solenoid (CS) capable of driving and controlling the plasma current in a compact, high-field, low-cost tokamak power plant. The LBNL objectives and milestones for this project were divided into two distinct tracts: Diagnostics and Quench Simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Comparison of the Accuracy and Speed of Transient Mobile A/C System Simulation Models: Preprint

The operation of air conditioning (A/C) systems is a significant contributor to the total amount of fuel used by light- and heavy-duty vehicles. Therefore, continued improvement of the efficiency of these mobile A/C systems is important. Numerical simulation has been used to reduce the system development time and to improve the electronic controls, but numerical models that include highly detailed physics run slower than desired for carrying out vehicle-focused drive cycle-based system optimization. Therefore, faster models are needed even if some accuracy is sacrificed. In this study, a validated model with highly detailed physics, the 'Fully-Detailed' model, and two models with different levels of simplification, the 'Quasi-Transient' and the 'Mapped- Component' models, are compared. The Quasi-Transient model applies some simplifications compared to the Fully-Detailed model to allow faster model execution speeds. The Mapped-Component model is similar to the Quasi-Transient model except instead of detailed flow and heat transfer calculations in the heat exchangers, it uses lookup tables created with the Quasi-Transient model. All three models are set up to represent the same physical A/C system and the same electronic controls. Speed and results of the three model versions are compared for steady state and transient operation. Steady state simulated data are also compared to measured data. The results show that the Quasi-Transient and Mapped-Component models ran much faster than the Fully-Detailed model, on the order of 10- and 100-fold, respectively. They also adequately approach the results of the Fully-Detailed model for steady-state operation, and for drive cycle-based efficiency predictions

02 PETROLEUM↗