Search NASA⌕ Search

SEARCH · Search NASA

Results for “DECELERATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Solar particle propagation from 1 to 5 AU

The radial variation of the interplanetary propagation of solar cosmic rays is investigated on a grand scale by performing a statistical analysis of charged-particle data obtained by Pioneers 10 and 11 from launch to Jovian encounter (i.e., at distances of 1 to 5 AU). A numerical propagation model is adopted which includes diffusion, convection, and adiabatic deceleration, as well as a variable power-law diffusion coefficient. The study of solar particle events is carried out by analyzing individually each of five key parameters that are uniquely defined in each solar particle event: the time to maximum flux starting from the initial release at the sun, the anisotropy at the time to maximum flux, the flux at that time, the time width of the event at half the flux at the time to maximum, and the decay time. Combined results for the proton energy ranges from 3.4 to 5.2 MeV and 24 to 30 MeV are presented, the average radial diffusion coefficients between 1 and 5 AU are determined for each energy range, and it is found that the combination of a near-impusive injection with a temporally constant spectral index produces a reasonably good fit to the high-energy data but not as good a fit to the low-energy data. Implications of the results obtained are discussed for cosmic-ray propagation theory, solar modulation studies, and interplanetary acceleration of solar particles.

Zwickl, R. D.↗

Return to earth in the Space Shuttle

The mission sequence of the first Shuttle orbital test flight (OFT-1), scheduled for March 1979, is outlined with attention to the landing phase. Descent into the atmosphere will begin at 400,000 feet at a pitch angle of 40 deg. At 80,000 feet the spacecraft decelerates to Mach 2.5, and the approach and landing phase begin at around 10,000 feet. TACAN stations will supply navigation data during most of the descent, with the pilot taking over most of the control functions during the final flare-out and approach to the runway. Also outlined is the sequencing of the RCS jets and aero surfaces.

Brand, V. D.↗

Postural illusions experienced during Z-axis recumbent rotation and their dependence upon somatosensory stimulation of the body surface

A blindfolded recumbent subject experiences a variety of postural illusions when rotated about his Z axis. Initially, during the acceleratory phase of rotation, turning about his Z axis is experienced; but, as rotary velocity increases, a spiraling of the body outward in the direction opposite to true rotation is experienced as well. Above 15-20 rpm, only orbital motion of the body is experienced, with the subject feeling that he is always facing in the same direction. One cycle of the apparent orbit is completed each time the subject actually rotates 360 deg. The reverse sequence of illusory motion is experienced during deceleration. The illusory motion all subjects experience during Z-axis recumbent rotation is shown to depend upon the touch and pressure stimulation of the body surface generated by contact forces of support.

Lackner, J. R.↗

Surface brightness, standard candles and q/0/

The most direct way to determine the deceleration parameter, q(0), of the universe is through the study of the redshift-magnitude relation of extragalactic sources. Progress has been slow because the necessary sources for this study must be standard candles, which have identical absolute total luminosity (balometric or monochromatic). The present paper shows, first of all, that, although necessary, this is not a sufficient condition for nonpoint-like (or resolved) sources. A modification of the redshift-magnitude relation is then described for a certain class of nonstandard candles using measurements of isophotal surface brightness. It is noted that such measurements can be used to standardize the central surface brightness of galaxies, but the standardization of the scale parameter remains beyond observations.

Petrosian, V.↗

The 3 K blackbody radiation, Dirac's Large Numbers Hypothesis, and scale-covariant cosmology

A program is described which is intended to derive a generalized system of gravitational equations that allow (but do not require) G to vary, to use the 3-K blackbody radiation to fix the relation between G and the gauge function, and to employ Dirac's (1937) Large Numbers Hypothesis to derive the geometry of the universe. Einstein's equations are retained in their total integrity, but the specification is made that they are valid only when gravitational units are used. A scale-invariant form of Einstein's equations is obtained, and from this are derived the energy conservation law, the baryon-number conservation law, and the appropriate cosmological equations. Dirac's proposals of 1937 and 1973 are incorporated into the formalism, and a gauge based on consolidation of the 3-K blackbody radiation is presented. A unique solution for the geometry of the universe is determined for zero curvature solely from the 3-K radiation and the Large Numbers Hypothesis; this solution predicts a deceleration parameter exactly equal to unity.

Canuto, V.↗

Aircraft mission analysis

Aircraft missions, from low to hypersonic speeds, are analyzed rapidly using the FORTRAN IV program NSEG. Program employs approximate equations of motion that vary in form with type of flight segment. Takeoffs, accelerations, climbs, cruises, descents, decelerations, and landings are considered.

Hauge, D. S.↗

Centrifugal reciprocating compressor

Efficient compressor uses centrifugal force to compress gas. System incorporates two coupled dc motors, each driving separate centrifugal reciprocating-compressor assembly. Motors are synchronized to accelerate and decelerate alternately.

High, W. H.↗

Resin/fiber thermo-oxidative interactions in PMR polymide/graphite composites

The amounts of resin weight loss and fiber weight loss in four PMR-polyimide graphite fiber composites were calculated from the composite weight losses and the fiber/resin ratios of the composites after long term thermo-oxidative aging in 600 F air. The accelerating effect of graphite fiber on resin weight loss, compared to neat resin weight loss, indicated the presence of a deleterious resin/fiber thermo-oxidative interaction, presumably due to fiber impurities. Similarly, the decelerating effect of the protective matrix resin on fiber weight loss, compared to bare fiber weight loss, was also demonstrated. The amount of hydrazine-indigestible resin and the amount of loose surface graphite fiber that formed during 600 deg F exposure of the composites were quantitatively determined. The indigestible residual resin was also qualitatively studied by scanning electron microscopy.

Alston, W. B.↗

NSEG: A segmented mission analysis program for low and high speed aircraft. Volume 3: Demonstration problems

Program NSEG is a rapid mission analysis code based on the use of approximate flight path equations of motion. Equation form varies with the segment type, for example, accelerations, climbs, cruises, descents, and decelerations. Realistic and detailed vehicle characteristics are specified in tabular form. In addition to its mission performance calculation capabilities, the code also contains extensive flight envelope performance mapping capabilities. For example, rate-of-climb, turn rates, and energy maneuverability parameter values may be mapped in the Mach-altitude plane. Approximate take off and landing analyses are also performed. At high speeds, centrifugal lift effects are accounted for. Extensive turbojet and ramjet engine scaling procedures are incorporated in the code.

Hague, D. S.↗

Thermal stress analysis of ceramic gas-path seal components for aircraft turbines

Stress and temperature distributions were evaluated numerically for a blade-tip seal system proposed for gas turbine applications. The seal consists of an abradable ceramic layer on metallic backing with intermediate layers between the ceramic layer and metal substrate. The most severe stresses in the seal, as far as failure is concerned, are tensile stresses at the top of the ceramic layer and shear and normal stresses at the layer interfaces. All these stresses reach their maximum values during the deceleration phase of a test engine cycle. A parametric study was carried out to evaluate the influence of various design parameters on these critical stress values. The influences of material properties and geometric parameters of the ceramic, intermediate, and backing layers were investigated. After the parametric study was completed, a seal system was designed which incorporated materials with beneficial elastic and thermal properties in each layer of the seal. An analysis of the proposed seal design shows an appreciable decrease in the magnitude of the maximum critical stresses over those obtained with earlier configurations.

Kennedy, F. E.↗

Deployment mechanisms on Pioneer Venus probes

Deployment mechanisms were developed to position scientific instruments during probe descent into the Venus atmosphere. Each mechanism includes a provision for pyrotechnic release of the enclosure door, negator springs for positive deployment torque, and an active damper using a shunted dc motor. The deployment time requirement is under 2 seconds, and the deployment shock must be less than 100 g's. The mechanism is completely dry lubricated and constructed mainly of titanium for high strength and high temperature stability. The mechanism was qualified for descent decelerations up to 565 g's and for instrument alignment up to 940 F. The mechanism requirements, the hardware design details, the analytical simulations, and the qualification testing are described.

Townsend, W. L.↗

YF-17/ADEN system study

The YF-17 aircraft was evaluated as a candidate nonaxisymmetric nozzle flight demonstrator. Configuration design modifications, control system design, flight performance assessment, and program plan and cost we are summarized. Two aircraft configurations were studied. The first was modified as required to install only the augmented deflector exhaust nozzle (ADEN). The second one added a canard installation to take advantage of the full (up to 20 deg) nozzle vectoring capability. Results indicate that: (1) the program is feasible and can be accomplished at reasonable cost and low risk; (2) installation of ADEN increases the aircraft weight by 600 kg (1325 lb); (3) the control system can be modified to accomplish direct lift, pointing capability, variable static margin and deceleration modes of operation; (4) unvectored thrust-minus-drag is similar to the baseline YF-17; and (5) vectoring does not improve maneuvering performance. However, some potential benefits in direct lift, aircraft pointing, handling at low dynamic pressure and takeoff/landing ground roll are available. A 27 month program with 12 months of flight test is envisioned, with the cost estimated to be $15.9 million for the canard equipped aircraft and $13.2 million for the version without canard. The feasiblity of adding a thrust reverser to the YF-17/ADEN was investigated.

Gowadia, N. S.↗

Description of the VTOL Approach and Landing Technology (VALT) CH-47 research system

The Langley Research Center modified a CH-47B helicopter to provide a general-purpose variable-stability capability for the VTOL approach and landing technology (VALT) program. The functional aspects and capabilities of the overall system are described. Automatic decelerating approach data are presented to illustrate the performance of the overall system.

Kelly, J. R.↗

Experimental Clean Combustor Program (ECCP), phase 3

A double annular advanced technology combustor with low pollutant emission levels was evaluated in a series of CF6-50 engine tests. Engine lightoff was readily obtained and no difficulties were encountered with combustor staging. Engine acceleration and deceleration were smooth, responsive and essentially the same as those obtainable with the CF6-50 combustor. The emission reductions obtained in carbon monoxide, hydrocarbons, and nitrogen oxide levels were 55, 95, and 30 percent, respectively, at an idle power setting of 3.3 percent of takeoff power on an EPA parameter basis. Acceptable smoke levels were also obtained. The exit temperature distribution of the combustor was found to be its major performance deficiency. In all other important combustion system performance aspects, the combustor was found to be generally satisfactory.

Gleason, C. C.↗

Cosmology of a charged universe

The Proca generalization of electrodynamics admits the possibility that the universe could possess a net electric charge uniformly distributed throughout space, while possessing no electric field. A general-relativistic model of cosmological expansion dominated by such a charged background has been calculated, and is consistent with present observational limits on the Hubble constant, the deceleration parameter, and the age of the universe. However, if this cosmology applied at the present epoch, the very early expansion of the universe would have been too rapid for cosmological nucleosynthesis or thermalization of the background radiation to have occurred. Hence, domination of the present expansion by background charge appears to be incompatible with the 3-K background and big-bang production of light elements. If the present background charge density were sufficiently small (but not strictly zero), expansion from the epoch of nucleosynthesis would proceed according to the conventional scenario, but the energy due to the background charge would have dominated at some earlier epoch. This last possibility leads to equality of pressure and energy density in the primordial universe.

Barnes, A.↗

Low frequency spectra of type III solar radio bursts

Flux density spectra have been determined for 91 simple type III solar bursts observed by the Goddard Space Flight Center radio astronomy experiment on the IMP-6 spacecraft during 1971 and 1972. Spectral peaks were found to occur at frequencies ranging from 44 kHz up to 2500 kHz. Half of the bursts peaked between 250 kHz and 900 kHz, corresponding to emission at solar distances of about 0.3 to 0.1 AU. Maximum burst flux density sometimes exceeds 10 to the -14th W/sq m/Hz. The primary factor controlling the spectral peak frequency of these bursts appears to be a variation in intrinsic power radiated by the source as the exciter moves outward from the sun, rather than radio propagation effects between the source and IMP-6. Thus, a burst spectrum strongly reflects the evolution of the properties of the exciting electron beam, and according to current theory, beam deceleration could help account for the observations.

Weber, R. R.↗

Effect of forward velocity and crosswind on the reverse-thrust performance of a variable-pitch fan engine

Variable-pitch-fan engines may be attractive for future short-haul aircraft if sufficient reverse thrust is available for aircraft deceleration after touchdown. Thrust reversal is obtained in these engines by changing fan blade pitch about 90 deg, which causes the fan airflow to enter the fan duct nozzle and exhaust through the fan inlet. This capability would eliminate the heavy and costly thrust reverser system required for current fixed-pitch turbofan engines. NASA has, therefore, supported the development of advanced technology for a quiet, clean, high-bypass-ratio turbofan engine for future short-haul aircraft. In connection with this program, tests were conducted to determine the effect of forward velocity and angle of attack on steady-state reverse-thrust performance. Other objectives of the tests were related to the determination of the effect of forward velocity on forward-to-reverse thrust transient performance and the determination of the effectiveness of an overshoot blade angle technique to establish reverse thrust during a transient. The results of the tests are discussed.

Reemsnyder, D. C.↗

Gas drag in primordial circumplanetary envelopes - A mechanism for satellite capture

Known properties of the current solar system and Bodenheimer's (1977) model of early Jovian evolution are employed to develop a mechanism for satellite capture based on gas drag in primordial circumplanetary envelopes. In particular, the deceleration and fragmentation of two parent bodies passing through an extended primordial Jovian nebula may account for the clusters of prograde and retrograde satellites of Jupiter. Subsequently, the fragments probably underwent limited orbital evolution, and were dispersed by collision with a stray body. The heavy element cores of the outer planets may also be due to primordial gas drag capture. Nebular drag capture of the Martian satellites Phobos and Deimos, Neptune's Nereid and Triton, and Saturn's Phoebe and Iapetus is also conceivable.

Pollack, J. B.↗