Search NASA⌕ Search

SEARCH · Search NASA

Results for “DFT calculation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Investigation of coverage dependence of the stretching frequency of CO adsorbed on Pd surfaces at low coverage limits

The stretching frequency of the C—O bond is a sensitive probe of the local environment of a surface-bound CO molecule, including the adorption site and density, i.e. surface coverage. In this work, we extend our analysis beyond the frequency shift due to differences in adsorption configurations. Using density functional theory (DFT) calculations, we directly explore the correlations between surface coverage and the stretching frequency of adsorbed CO on Pd surfaces. Here we also perform constant pressure infrared reflection absorption measurements of CO on Pd(111) and use existing relations between pressure and coverage to derive coverage dependency. Both results are compared to previously reported experimental data. Our derived correlations of peak frequency and area with surface coverage can help interpret experimental IR spectra in real time and extract time-dependent concentration data from transient kinetic experiments.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Insights into the interaction of nitrobenzene and the Ag(111) surface: A DFT study

Here, this study explores the potential of nitrobenzene as an anolyte material for nonaqueous redox flow batteries (RFBs) by theoretically examining its low-coverage adsorption behavior on neutral and charged Ag(111) model electrode surfaces. At the low coverage limit, DFT calculations show a preference for nitrobenzene to adsorb parallel to the surface, with the benzene ring and nitro group centered over HCP sites. Interactions between nitrobenzene and the surface were analyzed using induced charge density analysis, Bader charge analysis, and projected density of states (PDOS). It was found that nitrobenzene adsorbs primarily through van der Waals interactions with the surface. As nitrobenzene accumulates negative charge, the strength of adsorption diminishes. Understanding the electrode-electrolyte interface is crucial for enhancing RFB electrochemical performance, and this study sheds light on nitrobenzene's interaction with a model Ag electrode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorbate-induced adatom formation on Au-Cu bimetallic alloys and its possible consequences for CO 2 electroreduction

The adsorbate-induced formation of sub-nanometer clusters on transition-metal single crystals observed in previous high-pressure microscopic studies hinted at the in-situ formation of unique active sites even on large nanoparticle catalysts. We propose that the adatom formation energy can be used as an energetic descriptor for the initial step toward the adsorbate-induced metal-cluster formation process. This descriptor can be efficiently computed using density functional theory (DFT) calculations and applied for screening and identification of metal catalysts where this phenomenon may play an important role in generating active sites in-situ. As a proof of concept, here, we construct an adatom formation energy database for three Au x Cu y alloys (x:y = 3:1, 1:1, or 1:3) and eighteen adsorbates (H, C, N, O, F, S, Cl, Br, I, CH x , NH x (x = 1 – 3), CO, NO, and OH) commonly involved in catalytic reactions. The energetics of adatom formation were examined in all cases where the (111) terrace, (211) step-edge, and (874) kink were the sources of the adatom. We demonstrate that the presence of an adsorbate could alter not only the energetics for adatom formation but also the elemental nature of the preferred adatom being formed. Using our database, we identified promising systems which favor adsorbate-induced adatom formation under near-ambient conditions. Specifically, CO-induced adatom formation on all three Au-Cu alloy surfaces could occur under CO 2 electroreduction (CO 2 RR) conditions. This phenomenon offers a qualitative explanation for the experimentally observed CO 2 RR activity on Au-Cu alloy catalysts. As a result, our methodology offers an easily expandable and efficient approach for large-scale catalyst screening with regards to adatom/cluster formation under reaction conditions and provides insight into the possible nature of active sites on alloy catalysts from a novel perspective.

Active site↗

Selective single-atom adsorption for precision separation of lead ions in tap water via capacitive deionization

Capacitive deionization (CDI) offers a cost-effective and low-energy method for selective removal of Pb 2+ from drinking water. Modifying CDI electrode surfaces with functional groups presents a versatile approach to enhancing selective ion adsorption capacity. However, a comprehensive understanding of the selectivity and removal efficiency of Pb 2+ among diverse functional groups remains unexplored. Here, we investigated the effects of different functional groups (-SH, -COOH, and -NH 2 ) attached to the graphene oxide (GO) electrode surfaces on Pb 2+ selectivity and removal efficiency. Surprisingly, GO-COOH demonstrated single-atom adsorption of Pb 2+ , displaying superior removal efficiency and selectivity compared with -SH and -NH 2 , although -SH possesses significant chelation capability for Pb 2+ . Both density functional theory (DFT) calculations and X-ray pair distribution function (PDF) analyses confirmed that Pb 2+ exhibits a theoretically higher affinity to -COOH. Further, this research deepens our understanding of the interactions between functional groups and heavy metal ions, enabling selective and rapid separation of target cations for water purification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Engineering bimetallic interfaces and revealing the mechanism for carbon dioxide electroreduction to C 3+ liquid chemicals

Reduction reaction of CO 2 (CO 2 RR) to liquid C 3+ chemicals is a net-zero-carbon process and can increase local resiliency to power outages and fuel consumption. The mechanism and the catalyst design rules of CO 2 RR-to-C 3+ are unknown. Engineering bimetallic interface (e.g., Pd/Au) to tune the intermediate adsorption is promising for promoting C 3+ formation. Our density functional theory (DFT) calculations find that *CH 2 could be the key intermediate and C 1 -CH 2 coupling could be the rate-limiting step to generate C 3+ . High CO surface coverages can promote the bimetallic interfacial sites, lower the energetics of the C 1 -CH 2 coupling step, and enhance the C 3+ formation. We further construct a volcano plot of C 1 -CH 2 kinetics as a function of the binding strength of key intermediate *CH 2 via engineering the d-band center of the interfacial site. Our findings could guide the rational design of bimetallic interfaces and their near-surface microenvironment for enhancing CO 2 RR-to-C 3+ .

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Observation of Anisotropic Charge Density Wave in Layered 1T-TiSe 2

Material systems containing charge density waves (CDWs) are ideal for studying structural symmetry breaking induced by electron modulation that would give rise to unconventional macroscopic phenomena such as high-T c superconductivity and colossal magnetoresistance. Layered 1T-TiSe 2 has attracted particular research interests given its rich phase diagram consisting of commensurate and incommensurate CDWs, as well as superconductivity. These phases can be tuned by temperature, pressure, electric field, or intercalation. Moreover, superconductivity is found to be strongly connected to the formation of CDW domain walls. Here, we conduct a full-scale study on 1T-TiSe 2 using an integration of techniques to investigate, at cryogenic temperatures, the real space, reciprocal space, and energy space properties. Our results show that the CDW forms three- dimensional cylinder shape domain, with different in-plane and out-of-plane coherence lengths. First principles density functional theory (DFT) calculations are integrated to explore the electronic feature of CDW in 1T-TiSe 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Story of 5d Metallocorroles: From Metal–Ligand Misfits to New Building Blocks for Cancer Phototherapeutics

Porphyrin chemistry is Shakespearean: over a century of study has not withered the field’s apparently infinite variety. Heme proteins continually astonish us with novel molecular mechanisms, while new porphyrin analogues bowl us over with unprecedented optical, electronic, and metal-binding properties. Within the latter domain, corroles occupy a special place, exhibiting a unique and rich coordination chemistry. The 5d metallocorroles are arguably the icing on that cake. New Zealand chemist Penny Brothers has used the word “misfit” to describe the interactions of boron, a small atom with a predilection for tetrahedral coordination, and porphyrins, classic square-planar ligands. Steve Jobs lionized misfits as those who see things differently and push humanity forward. Both perspectives have inspired us. The 5d metallocorroles are misfits in that they encapsulate a large 5d transition metal ion within the tight cavity of a contracted porphyrin ligand. Given the steric mismatch inherent in their structures, the syntheses of some 5d metallocorroles are understandably capricious, proceeding under highly specific conditions and affording poor yields. Three broad approaches may be distinguished. (a) In the metal–alkyl approach, a free-base corrole is exposed to an alkyllithium and the resulting lithio-corrole is treated with an early transition metal chloride; a variant of the method eschews alkyllithium and deploys a transition metal–alkyl instead, resulting in elimination of the alkyl group as an alkane and insertion of the metal into the corrole. This approach is useful for inserting transition metals from groups 4, 5, and, to some extent, 6, as well as lanthanides and actinides. (b) In our laboratory, we have often deployed a low-valent organometallic approach for the middle transition elements (groups 6, 7, 8, and 9). The reagents are low-valent metal–carbonyl or −olefin complexes, which lose one or more carbon ligands at high temperature, affording coordinatively unsaturated, sticky metal fragments that are trapped by the corrole nitrogens. (c) Finally, a metal acetate approach provides the method of choice for gold and platinum insertion (groups 10 and 11). This Account provides a first-hand perspective of the three approaches, focusing on the last two, which were largely developed in our laboratory. In general, the products were characterized with X-ray crystallography, electrochemistry, and a variety of spectroscopic methods. The physicochemical data, supplemented by relativistic DFT calculations, have provided fascinating insights into periodic trends and relativistic effects. An unexpected feature of many 5d metallocorroles, given their misfit character, is their remarkable stability under thermal, chemical, and photochemical stimulation. Many of them also exhibit long triplet lifetimes on the order of 100 μs and effectively sensitize singlet oxygen formation. Many exhibit phosphorescence in the near-infrared under ambient conditions. Furthermore, water-soluble ReO and Au corroles exhibit impressive photocytotoxicity against multiple cancer cell lines, promising potential applications as cancer phototherapeutics. We thus envision a bright future for the compounds as rugged building blocks for new generations of therapeutic and diagnostic (theranostic) agents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Examination of Ion-Pair Competition in Alkaline Aluminate Solutions Using In Situ Liquid SIMS

Understanding the structure and composition of aluminate complexes in extremely alkaline systems such as Bayer liquors has received enormous attentions due to its fundamental and industrial importance. However, obtaining direct molecular information of the underlying ion-ion interactions using traditional approaches such as NMR or Raman spectroscopy is challenging due to the weakness of these interactions and/or their complex overlapping spectral signatures. Here, we exploit in situ liquid secondary ion mass spectrometry (SIMS) as a new approach and show how it enables new insights. In contrast with traditional techniques, using SIMS we succeeded in acquiring information on dominant ion clusters in these alkaline systems. In Na + /K + mixed alkaline aluminate solutions we clearly observe preferential formation of Na + -anion clusters over K + -anion clusters. Further, evaluation of these clusters by density functional theory (DFT) calculations shows that these structures are stable and that their relative bond energies are consistent with their observed SIMS signal intensity differences. This demonstrates a key advantage of in situ liquid SIMS for overcoming ambiguities obscuring important information in these systems on constituent molecular clusters defined by relatively weak ion pair competition and ion-solvent interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-Atom Pt Boosting Electrochemical Nonenzymatic Glucose Sensing on Ni(OH) 2 /N-Doped Graphene

Conventional nanomaterials in electrochemical non-enzymatic sensing face huge challenge due to their complex size-, surface- and composition- dependent catalytic properties and low active site density. In this work, we designed a single-atom Pt supported on Ni(OH) 2 nanoplates/nitrogen-doped graphene (Pt 1 /Ni(OH) 2 /NG) as the first example for constructing a single-atom catalyst based electrochemical non-enzymatic glucose sensor. The resulting Pt 1 /Ni(OH) 2 /NG exhibited a low anode peak potential of 0.48 V and high sensitivity of 220.75 μA mM -1 cm -2 towards glucose, which are 45 mV lower and 12 times higher than those of Ni(OH) 2 , respectively. The catalyst also showed excellent selectivity for several important interferences, short response time of 4.6 s, and high stability over 4 weeks. Experimental and density functional theory (DFT) calculated results reveal that the improved performance of Pt 1 /Ni(OH) 2 /NG could be attributed to stronger binding strength of glucose on single-atom Pt active centers and their surrounding Ni atoms, combined with fast electron transfer ability by the adding of the highly conductive NG. Finally, this research sheds light on the applications of SACs in the field of electrochemical non-enzymatic sensing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Six-Membered Concerted Mechanism for CO 2 Capture by Amines Studied under Charged Microdroplet Reaction Conditions

Carbon dioxide (CO 2 ) capture and storage represents an important technological challenge. A mechanistic understanding of interactions involved in the capture process is necessary not only for technological development but also for efficient conversion of captured CO 2 into value-added materials. Herein, we present a novel contained secondary electrospray ionization platform for studying the interactions of gaseous amines and CO 2 gas under microdroplet reaction conditions, which enables mass spectrometry (MS) characterization of CO 2 capture products and intermediates in real time. We detected [2 M + CO 2 + H] + species, which corresponds to a six-membered intermediate. DFT calculations confirmed the high stability of the protonated six-membered ring intermediate. This finding provides a plausible concerted mechanism in the microdroplet environment that excludes the involvement of thermodynamically disfavored ionic species. The carbamic acid counterpart of the final product/salt was readily characterized by tandem MS. The carbamic acid/amine salt was also isolated and characterized by Fourier transform infrared spectroscopy. By virtue of the fact that headspace vapors of amines are sampled, we were able to establish a high-throughput platform that enabled the CO 2 capture capacity of five different amines to be studied in under 2 min. The same device also enabled the absolute quantification of capture capacity.

Amines↗

Q-Band Electron-Nuclear Double Resonance Reveals Out-of-Plane Hydrogen Bonds Stabilize an Anionic Ubisemiquinone in Cytochrome bo 3 from Escherichia coli [Q-Band ENDOR Reveals Out-of-Plane Hydrogen Bonds Stabilize an Anionic Ubisemiquinone in Cytochrome bo 3 from Escherichia coli ]

The respiratory cytochrome bo 3 ubiquinol oxidase from E. coli has a high affinity ubiquinone binding site that stabilizes the one-electron reduced ubisemiquinone (SQ H ), which is a transient intermediate during the electron mediated reduction of O 2 to water. It is known that SQ H is stabilized by two strong hydrogen bonds from R71 and D75 to the ubiquinone carbonyl oxygen O1, and weak hydrogen bonds from H98 and Q101 to O4. In the current work, SQ H was investigated with orientation selective Q-band (~34 GHz) pulsed 1 H ENDOR spectroscopy on fully deuterated cyt bo 3 in an H 2 O solvent so that only exchangeable protons contribute to the observed ENDOR spectra. Simulations of the experimental ENDOR spectra provided the principal values and directions of the hyperfine (hfi) tensors for the two strongly coupled H-bond protons (H1 and H2). For H1, the largest principal component of the proton anisotropic hfi tensor T z' = 11.8 MHz, whereas for H2 T z' = 8.6 MHz. Remarkably, the data show that the direction of the H1 H-bond is nearly perpendicular to the quinone plane (~70° out of plane). The orientation of the second strong hydrogen bond, H2, is out of plane by about 25°. Equilibrium molecular dynamics (MD) simulations on a membrane-embedded model of the cyt bo 3 Q H site show that these H-bond orientations are plausible but do not distinguish which H-bond, from R71 or D75, is nearly perpendicular to the quinone ring. Here, density functional theory (DFT) calculations support that the distances and geometries of the H-bonds to the ubiquinone carbonyl oxygens, along with the measured proton anisotropic hfi couplings, are most compatible with an anionic (deprotonated) ubisemiquinone

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigating CO2 Sorption in SIFSIX-3-M (M = Fe, Co, Ni, Cu, Zn) Through Computational Studies

A combined Monte Carlo (MC) simulation and periodic density functional theory (DFT) study of CO2 sorption was performed in SIFSIX-3-M (M = Fe, Co, Ni, Cu, Zn), a family of hybrid ultramicroporous materials (HUMs) that consists of M2+ ions coordinated to pyrazine ligands and are pillared with SiF6 2?? (\SIFSIX") anions. Grand canonical Monte Carlo (GCMC) simulations of CO2 sorption in all five SIFSIX-3-M variants produced isotherms that are in good agreement with the corresponding experimental measurements. The theoretical isosteric heat of adsorption (Qst) for CO2 as obtained through canonical Monte Carlo (CMC) simulations are also in close agreement with the experimental values. Consistent with experiment, the simulations generated the following trend in the CO2 Qst: SIFSIX-3-Cu > SIFSIX-3-Ni > SIFSIX-3-Co > SIFSIX-Zn > SIFSIX-3-Fe. The magnitudes of the theoretical Qst and relative trend were further supported by periodic DFT calculations of the adsorption energy for CO2 within the respective HUMs. We attribute the observed Qst trend in SIFSIX-3-M to their differences in pore size and lattice parameters. Specifically, the sorption energetics decrease with increasing pore size and a/b lattice constant. Simulations of CO2 sorption in SIFSIX-3-Cu resulted in different profiles for the radial distribution function (g(r)) and dipole distribution than within the other analogues due to the smaller pore size and much shorter a/b unit cell lengths of the crystal structure; this is a direct consequence of the Jahn-Teller effect. Although these HUMs are isostructural, notable differences in the classical energy contributions for CO2 sorption were observed from the GCMC simulations. Overall, this study demonstrates that the CO2 Qst in SIFSIX-3-M can be controlled by the choice of the saturated metal, with values ranging from 42 to 54 kJ mol-1.

Forrest, Katherine A.↗

Quantum Chemistry-Informed Active Learning to Accelerate the Design and Discovery of Sustainable Energy Storage Materials

Here we employed Density Functional Theory (DFT) to compute oxidation potentials of 1,400 homobenzylic ether molecules to search for the ideal sustainable redoxmer design. The generated data were used to construct an active learning model based on Bayesian optimization (BO) that targets candidates with desired oxidation potentials utilizing only a minimal number of DFT calculations. The active learning model demonstrated not only significant efficiency improvement over the random selection approach but also robust capability in identifying desired candidates in an untested set of 112,000 homobenzylic ether molecules. Our findings highlight the efficacy of quantum chemistry-informed active learning to accelerate the discovery of materials with desired properties from a vast chemical space.

25 ENERGY STORAGE↗

Superstructures and Superconductivity Linked with Pd Intercalation in Nb 2 Pd x Se 5

Single crystals of Nb 2 Pd x Se 5 have been grown covering a broad range of palladium stoichiometries, from x = 0.68 to x = 0.95 (Pd2 occupancies 0.36 and 0.90 respectively). Miscibility gaps in the Pd stoichiometry range are related to superstructures resulting from staged filling and ordering of the partially filled Pd atom site (Pd2, Wyckoff site 2a). For Pd2 near 1/2 occupancy, a superstructure based on an incommensurate occupation wave with modulation along the monoclinic b-axis is identified. Here, a superconducting dome is found for Pd2 occupancies above 0.58, with maximum Tc for Pd2 occupancy of approximately 2/3. DFT calculations for the fully and 1/2 occupied Pd2 site show that Nb 2 Pd x Se 5 can be considered an intercalation compound for Pd2 occupancy above the minimum required for structural stability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Instability of Monolayer-Thick PbSe on VSe 2

Two-dimensional monolayers derived from 3D bulk structures remain a relatively unexplored class of materials because of the challenge of stabilizing non-epitaxial interfaces. Here, we report an unusual reconstruction during the deposition of precursors when targeting the synthesis of heterostructures with an odd number of PbSe monolayers. Multilayer elemental precursors of Pb|Se + V|Se were deposited to have correct number of atoms to form [(PbSe) 1+δ ] q (VSe 2 ) 1 where q is the number of PbSe monolayers in the heterostructure. Structural analysis of the self-assembled precursor via xray reflectivity, x-ray diffraction, and HAADF-STEM suggests three different behaviors upon deposition. Precursors with q 7 and even values of q have the targeted nanoarchitectures after deposition which are maintained as the products are selfassembled through a near diffusionless process. Significant lateral surface diffusion occurred during deposition of precursors with q = 1, 3, and 5 resulting in the precursor having a different nanoarchitecture than targeted. Additional perpendicular long range diffusion occurs during self-assembly of these precursors resulting in different final products than targeted. DFT calculations of PbSe blocks show that the odd numbered layers are less stable than even numbered layers, which suggests an energetic driving force for the observed rearrangement. This work highlights the importance of understanding the reaction mechanism when attempting to prepare 2D layers of constituents with bulk 3D structures.

36 MATERIALS SCIENCE↗

Predicting and Synthesizing Interface Stabilized 2D Layers

The compound (Pb 2 MnSe 3 ) 0.6 VSe 2 was predicted to be kinetically stable based on density functional theory (DFT) calculations on an island of Pb 2 MnSe 3 between layers of VSe 2 . This approach provides a high degree of freedom by not forcing interlayer lattice match, making it ideal to investigate the likelihood of formation of new incommensurate layer misfit structures. The free space around the island is critical, as it allows atoms to diffuse and hence exploring the local energy landscape around the initial configuration. (Pb 2 MnSe 3 ) 0.6 VSe 2 was synthesized via a near diffusionless reaction from precursors where a repeating sequence of elemental layers matches the local composition and layer sequence of the predicted compound. The VSe 2 layer consists of a Se–V–Se trilayer with octahedral coordination of the V atoms. The Pb 2 MnSe 3 layer consists of three rock-salt-like planes, with a MnSe layer between the planes of PbSe. The center MnSe plane stabilizes the puckering of the outer PbSe layers. Electrical properties indicate that (Pb 2 Mn 1 Se 3 ) 0.6 VSe 2 undergoes a charge density wave transition at ~100 K and orders ferromagnetically at 35 K. Overall, the combination of theory and experiment enables a faster convergence to new heterostructures than either approach in isolation.

36 MATERIALS SCIENCE↗

Two-Dimensional Copper Iodide-Based Inorganic–Organic Hybrid Semiconductors: Synthesis, Structures, and Optical and Transport Properties

A group of copper iodide-based hybrid semiconductors with the general formula of 2D-CuI(L) 0.5 (L = organic ligands) are synthesized and structurally characterized. All compounds are two-dimensional (2D) networks made of one-dimensional (1D) copper iodide staircase chains that are interconnected by bidentate nitrogen-containing ligands. Results from optical absorption and emission experiments and density functional theory (DFT) calculations reveal that their photoluminescence (PL) can be systematically tuned by adjusting the lowest unoccupied molecular orbital (LUMO) energies of the organic ligands. Charge carrier transport measurements were carried out for the first time on single crystals of selected 2D-CuI(L) 0.5 structures, and the results show that they possess p-type conductivity with a Hall mobility of ~1 cm 2 V -1 s -1 for 2D-CuI(pm) 0.5 and 0.13 cm 2 V -1 s -1 for 2D-CuI(pz) 0.5 , respectively. These values are comparable to or higher than the mobilities of typical highly luminescent organic semiconductors. Finally, this work suggests that robust, high-dimensional copper iodide hybrid semiconductors are promising candidates to be considered as a new type of emissive layer for light-emitting diode (LED) devices.

36 MATERIALS SCIENCE↗

Role of Fluorine in Chemomechanics of Cation-Disordered Rocksalt Cathodes

The role of nanoscale chemomechanical behavior in the macroscopic performance of functional materials is well recognized. For lithium-ion battery cathodes, tremendous effort has been devoted to the development of new chemistry and structure, yet fundamental understanding of the correlation between redox processes and mechanical properties of the novel materials lags behind. In the present study, we prepare large discrete single grains of Li-excess cation-disordered rocksalts (DRX) and investigate their chemomechanical behavior at the particle level, using nanoresolution X-ray and electron-based spectro-imaging and chemical mapping techniques. While irregular cracking upon lithium extraction leads to the eventual breakdown of the baseline DRX oxide (Li 1.2 Ti 0.4 Mn 0.4 O 2 ) particles at a high delithiation state, the fluorinated-DRX (Li 1.3 Ti 0.3 Mn 0.4 O 1.7 F 0.3 ) clearly displays aligned cracking along the <001> direction. The resulting periodicity in the cracking pattern enables the particles to retain their integrity and, consequently, improved electrochemical stability. Density functional theory (DFT) calculations showed that fluorination leads to increased concentration of Li+ on the (001) planes and preferential Li movements along the <001>-family directions, revealing the underlying mechanism for directional cracking. Overall, our study demonstrates the unique role of fluorine in modulating nanoscale chemomechanics, which in turn influences the evolution of charge and strain heterogeneity at the particle level. These insights provide important design guidelines in further improving DRX cathode materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗