Structure and properties of the low-density phase ι-Al 2 O 3 from first principles
Not Available
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
The high-resolution transmission electron microscopy (HR-TEM) is used to study, in situ, spatially resolved decomposition in individual nanocrystals of metal hydroxides and oxyhydroxides. This case study reports on the decomposition of indium hydroxide (c-In(OH){sub 3}) to bixbyite-type indium oxide (c-In{sub 2}O{sub 3}). The electron beam is focused onto a single cube-shaped In(OH){sub 3} crystal of {l_brace}100{r_brace} morphology with ca. 35 nm edge length and a sequence of HR-TEM images was recorded during electron beam irradiation. The frame-by-frame analysis of video sequences allows for the in situ, time-resolved observation of the shape and orientation of the transformed crystals, which in turn enables the evaluation of the kinetics of c-In{sub 2}O{sub 3} crystallization. Supplementary material (video of the transformation) related to this article can be found online at (10.1016/j.jssc.2012.09.022). After irradiation the shape of the parent cube-shaped crystal is preserved, however, its linear dimension (edge) is reduced by the factor 1.20. The corresponding spotted selected area electron diffraction (SAED) pattern representing zone [001] of c-In(OH){sub 3} is transformed to a diffuse strongly textured ring-like pattern of c-In{sub 2}O{sub 3} that indicates the transformed cube is no longer a single crystal but is disintegrated into individual c-In{sub 2}O{sub 3} domains with the size of about 5-10 nm. The induction time of approximately 15 s is estimated from the time-resolved Fourier transforms. The volume fraction of the transformed phase (c-In{sub 2}O{sub 3}), calculated from the shrinkage of the parent c-In(OH){sub 3} crystal in the recorded HR-TEM images, is used as a measure of the kinetics of c-In{sub 2}O{sub 3} crystallization within the framework of Avrami-Erofeev formalism. The Avrami exponent of {approx}3 is characteristic for a reaction mechanism with fast nucleation at the beginning of the reaction and subsequent three-dimensional growth of nuclei with a constant growth rate. The structural transformation path in reconstructive decomposition of c-In(OH){sub 3} to c-In{sub 2}O{sub 3} is discussed in terms of (i) the displacement of hydrogen atoms that lead to breaking the hydrogen bond between OH groups of [In(OH){sub 6}] octahedra and finally to their destabilization and (ii) transformation of the vertices-shared indium-oxygen octahedra in c-In(OH){sub 3} to vertices- and edge-shared octahedra in c-In{sub 2}O{sub 3}. - Graphical abstract: Frame-by-frame analysis of video sequences recorded of HR-TEM images reveals that a single cube-shaped In(OH){sub 3} nanocrystal with {l_brace}100{r_brace} morphology decomposes into bixbyite-type In{sub 2}O{sub 3} domains while being imaged. The mechanism of this decomposition is evaluated through the analysis of the structural relationship between initial (c-In(OH){sub 3}) and transformed (c-In{sub 2}O{sub 3}) phases and though the kinetics of the decomposition followed via the time-resolved shrinkage of the initial crystal of indium hydroxide. Highlights: Black-Right-Pointing-Pointer In-situ time-resolved High Resolution Transmission Electron Microscopy. Black-Right-Pointing-Pointer Crystallographic transformation path. Black-Right-Pointing-Pointer Kinetics of the decomposition in one nanocrystal.
The reactivity of Ce{sub 1-x}Li{sub x}O{sub 2-{delta}} (x=0.025, 0.05, 0.075 and 0.1) solid solutions during the redox and two-step water-splitting cycles has been investigated in this work. Thermogravimetric analysis (TGA), X-ray diffraction (XRD) patterns and field-emission scanning electron microscopy (FE-SEM) indicate that there are two reaction mechanisms in the O{sub 2}-releasing step and the shift in the reaction mechanisms occurs in the O{sub 2}-releasing step because of sintering at high temperatures, and a decrease in the concentration of lattice oxygen occurs as the O{sub 2}-releasing step proceeds. The reaction in the O{sub 2}-releasing step follows a second-order mechanism over a temperature range of 1000-1170 Degree-Sign C and a contracting-area model over a temperature range of 1170-1500 Degree-Sign C. According to direct gas mass spectroscopy (DGMS), ceria doped at 5 mol% Li exhibits the highest reactivity in the O{sub 2}-releasing step during both redox cycles in air and two-step water-splitting cycles, whereas ceria doped at 2.5 mol% Li yields the highest amount of hydrogen (4.79 ml/g) in the H{sub 2}-generation step during the two-step water-splitting cycles, which is higher than ceria doped with other metals. DGMS and electrochemical impedance spectroscopy (EIS) suggest that the average reaction rate in the H{sub 2}-generation step is influenced by the concentration of extrinsic oxygen vacancies, and thus, the reactivity in the H{sub 2}-generation step, to some degree, could be tuned by varying the concentration of extrinsic oxygen vacancies (Li content). - Graphical abstract: Average reduction fraction of Ce{sub 1-x}Li{sub x}O{sub 2-{delta}} (x=0.025, 0.05, 0.075 and 0.10) solid solutions versus Li content in the O{sub 2}-releasing step during the redox cycles in air and the two-step water-splitting cycles. Highlights: Black-Right-Pointing-Pointer We have investigated Li-doped ceria for hydrogen production using two-step water-splitting cycles. Black-Right-Pointing-Pointer The sintering effect on the reaction mechanisms was first clarified. Black-Right-Pointing-Pointer The shift of reaction mechanisms occurs during the O{sub 2}-releasing step. Black-Right-Pointing-Pointer The reaction-mechanism shift occurs because of sintering at high temperatures. Black-Right-Pointing-Pointer Doping at 2.5 mol% Li results in the highest H{sub 2} yield and cyclability for hydrogen production.
O3-type NaNi 1/3 Fe 1/3 Mn 1/3 O 2 (NaNFM) is well investigated as a promising cathode material for sodium-ion batteries (SIBs), but the cycling stability of NaNFM still needs to be improved by using novel electrolytes or optimizing their structure with the substitution of different elements sites. To enlarge the alkali-layer distance inside the layer structure of NaNFM may benefit Na + diffusion. Herein, the effect of Ca-substitution is reported in Na sites on the structural and electrochemical properties of Na 1-x Ca x/2 NFM (x=0, 0.05, 0.1). X-ray diffraction (XRD) patterns of the prepared Na 1-x Ca x/2 NFM samples show single alpha-NaFeO 2 type phase with slightly increased alkali-layer distance as Ca content increases. The cycling stabilities of Ca-substituted samples are remarkably improved. The Na 0.9 Ca 0.05 Ni 1/3 Fe 1/3 Mn 1/3 O 2 (Na 0.9 Ca 0.05 NFM) cathode delivers a capacity of 116.3 mAh g -1 with capacity retention of 92% after 200 cycles at 1C rate. In operando XRD indicates a reversible structural evolution through an O3-P3-P3-O3 sequence of Na 0.9 Ca 0.05 NFM cathode during cycling. Compared to NaNMF, the Na 0.9 Ca 0.05 NFM cathode shows a wider voltage range in pure P3 phase state during the charge/discharge process and exhibits better structure recoverability after cycling. The superior cycling stability of Na 0.9 Ca 0.05 NFM makes it a promising material for practical applications in sodium-ion batteries.
High quality ZnO has applications in photonics and electronics. Literature has shown that continuous, but rough ZnO film can be grown on sapphire substrate by pulsed laser deposition (PLD). In this work, ZnO and Au were co-deposited by PLD on sapphire(0001) substrates from a single ZnO target overlaid with an Au strip that serves as a catalyst. The reflection high-energy electron diffraction (RHEED) patterns show paired double stripes from sample of ZnO-Au where the difference of in-plane lattice parameters between ZnO and Au is 11.4 %. The two-dimensional (2D) reciprocal space maps constructed from azimuthal RHEED (ARHEED) patterns reveal parallel epitaxial relationship between ZnO and Au in the continuous ZnO-Au film on sapphire substrate. Transmission electron microscopy (TEM) cross section images and energy dispersive spectroscopy maps show a minute amount of Au nanocrystals distributed in the entire ultrathin ZnO film. Atomic force microscopy shows the root-mean-square roughness of the surface of ultrathin ZnO film with Au is in the sub-nm range. The ARHEED and TEM results show that a couple of atomic percentages of Au co-deposited with ZnO catalyzes the growth of smooth ultrathin epitaxial ZnO film.
We report that this work synthesized a series of oxide composites with nominal compositions of BaCe 05 Zr 0.4 Y 0.1 O 3-δ (BCZY)-Ce 0.5 Y 0.5 O 2-δ (YDC) based on the BCZY/YDC molar ratios of 0.5:1, 1:1, 2:1, and 4:1 (BCZY-YDC-0.5–1, BCZY-YDC-1-1, BCZY-YDC-2-1, and BCZY-YDC-4-1) using a one-pot solid state reactive sintering (SSRS) method. The X-ray diffraction (XRD) patterns and refinement proved that the one-pot SSRS at 1450 °C for 12 h could achieve the perovskite-fluorite dual-phase composites (DPCs) with the desired structure compositions. The scanning electron microscopy (SEM) images showed that the two DPCs of BCZY-YDC-1-1 and BCZY-YDC-2-1 formed excellent percolation for perovskite and fluorite phases. The conductivity measurement by electrochemical impedance spectroscopy (EIS) and the transference number measurement by the electromotive force (EMF) test proved that changing the BCZY/YDC molar ratio and operating condition could adjust the DPC's conduction property to make them suitable for electrolytes and electrode scaffolds for protonic ceramic fuel cells (PCFCs). The long-term conductivity testing and the crystal structure analysis after EMF testing under versatile conditions indicated that the DPCs of BCZY-YDC-2-1 and BCZY-YDC-1-1 were durable PCFC component materials. The PCFC button cells with the as-discovered BCZY-YDC-2-1 and BCZY-YDC-1-1 as an electrolyte and an anode scaffold, respectively, and the reported Ba–Ce–Fe–Co–O perovskite-perovskite composite as a cathode showed promising performance under H 2 /air gradient.
Electronic properties such as band structure and Fermi velocity in low-angle twisted bilayer graphene (TBG) are intrinsically dependent on the atomic structure. Rigid rotation between individual graphene layers provides an approximate description of the bilayer symmetry. Upon relaxation, in-plane displacement of the atoms in low angle TBG causes a change in the symmetry through the enlargement of the AB stacking regions and the reduction in size of AA and SP stacking regions. However, the effect of this in-plane relaxation on the charge density remains unexplored, because the necessary electronic structure calculations of such large supercells of low twist angle TBG are computationally infeasible. Therefore, we develop a computationally efficient framework that enables the exploration of the charge density symmetry of the low twist angle TBG. This framework is based on the Fourier representation of the charge density which presents high intensity Bragg peaks. Here we find that with the decrease of twist angle, low intensity satellite peaks also become apparent. Our framework incorporates these satellite peaks which reveals transformation of symmetry in the charge density distribution from high to low twist angle TBG. One striking outcome is the demonstration of the electron localization in the AA region of low twist angle TBG. Our framework helps to explain the effect of the atomistic relaxation on the charge density distribution and thus, it provides information about exotic electronic properties of low twist angle TBG at a low computational expense.
Covalent organic frameworks (COFs) are a new, growing class of crystalline polymers with exceptional characteristics such as low density, mechanical strength, and flexibility. Taking three-dimensional (3D) COF-300 derivatives as an example, we apply molecular dynamics simulations to show that ultrahigh thermal conductivity (>15 W/(mK)) is achieved at a pore size of d = 0.63 nm. This is the first observation of such an outstanding intrinsic thermal conductivity of a 3D polymer in all directions. Further temperature-dependent thermal conductivity calculations and X-ray diffraction (XRD) patterns highlight the importance of maintaining microscopic order for a large thermal conductivity. We also demonstrate that the tunability and anisotropy in COFs provide sufficient room to engineer and obtain desired thermal conductivity. These findings provide a fundamental understanding of structure-thermal conductivity relation in COFs and shine a light on high-thermal-conductivity COFs for thermal management applications.
Here, in this study, we examined the effect of gamma radiation on the stabilities of aluminum hydroxide (gibbsite) and aluminum oxyhydroxide (boehmite) nanoparticles in relation to their thermal decomposition. X-ray diffraction (XRD) patterns and scanning electron microscopy (SEM) images revealed no significant differences in mineral components or morphology before and after radiation. However, thermogravimetric and differential scanning calorimetry (TGA/DSC) analyses showed that both boehmite and gibbsite nanoparticles experienced decreased mass loss following irradiation. Raman and attenuated total reflection-Fourier transfer infrared (ATR-FTIR) spectra indicated that a fraction of the hydroxyl content in both cases was selectively cleaved by radiation, primarily at the particle surfaces. Quantitative analyses of thermal mass loss behavior demonstrated that irradiated boehmite and gibbsite nanoparticles had higher activation energies than their pristine counterparts, with the extent of the increase dependent on the total dose. Taken together, these findings suggest that exposure to a sufficient dose of ionizing radiation alters these materials such that they are less prone to decomposition by dehydration. This increased stability may be due to the decreased hydrous nature of the samples after radiation exposure, which was supported by further high temperature drop calorimetry. Additionally, a radiation-induced amorphous phase on the nanoparticle surfaces appears to have a permanent and positive influence on their thermodynamic stabilities.
Leveraging the self-assembling behavior of liquid crystals designed for controlling ion transport is of both fundamental and technological significance. Here, we have designed and prepared a liquid crystal that contains (2,5-bis(5-(2,5,8,11-tetraoxatridecan-13-yl)thiophen-2yl)thieno[3,2-b]thiophene (BTTT) as mesogenic core and conjugated segment and symmetric tetra(ethylene oxide) (EO4) as polar side chains for ionic conducting regions. Driven by the crystallization of the BTTT cores, BTTT/dEO4 exhibits well-ordered smectic phases below 71.5 °C as confirmed by differential scanning calorimetry, polarized optical microscope, temperature dependent wide-angle X-ray scattering and grazing incidence wide-angle X-ray scattering (GIWAXS). We adopted a combination of experimental GIWAXS and molecular dynamics (MD) simulations to better understand the molecular packing of BTTT/dEO4 films, particularly when loaded with the ion conducting salt, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). Ionic conduction of BTTT/dEO4 is realized by the addition of LiTFSI, with the material able to maintain smectic phases up to r = [Li + ]/[EO] = 0.1. In this work, The highest ionic conductivity of 8 × 10 -3 S/cm was attained at an intermedium salt concentration of r = 0.05. It was also found that ion conduction in BTTT/dEO4 is enhanced by forming a smectic layered structure with irregular interfaces between the BTTT and EO4 layers and by the lateral film expansion upon salt addition. This can be explained by the enhancement of the misalignment and configurational entropy of the side chains, which increase their local mobility and that of the solvated ions. Our molecular design thus illustrates how, beyond the favorable energetic interactions that drive the assembly and ion solvating domains, modulation of entropic effects can also be favorably harnessed to improve ion conduction.
The structures and stabilities of alkaline earth metal peroxides XO2 (X = Ca, Be, Mg) were studied using an adaptive genetic algorithm (GA) for global structure optimization in combination with first-principles calculations. From the adaptive GA search, we obtained an orthorhombic structure for CaO2 with 12 atoms in the unit cell, which is energetically more favorable than the previously proposed structures. Reaction energy of the decomposition CaO2 → CaO + 1/2O2 determined by density functional theory (DFT) calculation shows that this orthorhombic calcium peroxide structure is thermodynamically stable. The simulated X-ray diffraction (XRD) pattern using our predicted structure is in excellent agreement with experimental data. We also show that crystal phase BeO2 is unlikely to exist under normal conditions. MgO2 has a cubic pyrite structure, but it is not stable against decomposition: MgO2 → MgO + 1/2O2.
The ability to synthesis well-ordered two-dimensional materials under ultra-high vacuum and directly characterize them by other techniques in-situ can greatly advance our current understanding on their physical and chemical properties. In this paper, we demonstrate that iso-oriented α-MoO3 films with as low as single monolayer thickness can be reproducibly grown on SrTiO3(001) substrates by molecular beam epitaxy ( (010)MoO3 || (001)STO, [100]MoO3 || [100]STO or [010]STO) through a self-limiting process. While one in-plane lattice parameter of the MoO3 is very close to that of the SrTiO3 (aMoO3 = 3.96 Å, aSTO = 3.905 Å), the lattice mismatch along other direction is large (~5%, cMoO3 = 3.70 Å), which leads to relaxation as clearly observed from the splitting of streaks in reflection high-energy electron diffraction (RHEED) patterns. A narrow range in the growth temperature is found to be optimal for the growth of monolayer α-MoO3 films. Increasing deposition time will not lead to further increase in thickness, which is explained by a balance between deposition and thermal desorption due to the weak van der Waals force between α-MoO3 layers. Lowering growth temperature after the initial iso-oriented α-MoO3 monolayer leads to thicker α-MoO3(010) films with excellent crystallinity.
Strict monitoring and control of selenium concentrations in freshwater supplies is critical to safeguarding human health and aquatic life. A handful of previously investigated sorbents exhibit noteworthy gravimetric (mg g -1 ) Se uptake capacities; however, often display insufficient volumetric (mg cm -3 ) capacities, thereby requiring large volumes of material for commercial implementation. In this paper, in pursuit of mitigating this material inefficiency, we investigated the selenite (SeO 3 2- ) and selenate (SeO 4 2- ) affinity of MOF-808, a Zr-based metal–organic framework with a high density of potential Se oxyanion binding sites. MOF-808 recorded exceptional volumetric and gravimetric Se oxyanion capacities of 133 mg g -1 (127 mg cm -3 ) and 118 mg g -1 (112 mg cm -3 ) for aqueous selenite and selenate, respectively. Single-crystal X-ray diffraction studies revealed that selenite and selenate can bind at the MOF node via two distinct binding motifs, an η 2 μ 2 motif in which the oxyanion coordinates to two different metal atoms in a single node, and a μ 2 motif in which the oxyanion interacts with only a single metal atom. Finally and furthermore, powder X-ray diffraction (PXRD) patterns and N 2 adsorption/desorption isotherms confirm the retention of bulk crystallinity and porosity after the uptake of Se oxyanions.
Magnetoelectric (ME) heterostructures can exhibit higher magnetic and ferroelectric ordering temperatures along with large ME coupling compared to single-phase multiferroic materials. We synthesized Pb(Fe 0.5 Nb 0.5 )O 3 (PFN)/Ni 0.65 Zn 0.35 Fe 2 O 4 (NZFO)/Pb(Fe 0.5 Nb 0.5 )O 3 (PFN)/Ni 0.65 Zn 0.35 Fe 2 O 4 (NZFO)/Pb(Fe 0.5 Nb 0.5 )O 3 (PFN) multilayer heterostructures having dimensions of 40/10/40/10/40 nm. High quality epitaxial growth of these heterostructures was confirmed via X-ray diffraction (XRD) and selected area electron diffraction (SAED) patterns. These nanostructures show well saturated polarization (~52 μC cm -2 ) and magnetization (~62 emu cm -3 ) at room temperature (RT). The magnetic and ferroelectric transitions occur well above RT. These heterostructures exhibit relaxor behavior and undergo 2nd order ferroelectric phase transition. Magnetodielectric measurements show significant coupling between the magnetic and electrical order parameters at RT. These characteristics of the heterostructures make them suitable as potential candidates for ultra-low power memory, spintronics, and different multifunctional (micro)nanoscale device applications.
Owing to the abundance of raw material reserves and low cost, Na-ion batteries (NIBs) have successfully gained widespread attention from academic and industrial communities in the past few decades. However, the insufficient cathode energy density is still one of the critical bottlenecks restricting the development of NIBs. Following a strategy of introducing Li+ into the transition-metal (TM) layer to enhance the oxygen redox reaction, a novel layered cathode material P2-Na 0.6 Li 0.11 Fe 0.27 Mn 0.62 O 2 (NLFMO) was designed and successfully synthesized. This NLFMO cathode not only delivers a large initial reversible capacity of 207.3 mA h g -1 , but also shows a good cycling performance (104.2 mA h g -1 after 80 cycles) and rate capability (126.2 mA h g -1 at 1C). The ultrahigh capacity is contributed by both cationic (Fe 3+ /Fe 4+ and Mn 3+ /Mn 4+ ) and partially reversible anionic redox (O 2- /O n- ) reactions, revealed by in situ X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS) techniques. Moreover, no detrimental P2–O2 phase transition was observed in ex situ X-ray diffraction (XRD) patterns, confirming the high structural stability during Na + deintercalation/intercalation processes. These results provide valuable information about the high-energy density layered cathode materials based on anionic redox reactions for NIBs.
Recognized as the most stable phase of uranium oxide, α-U 3 O 8 is widely used throughout the nuclear fuel cycle for safe storage and transportation. There is, however, a lack of understanding of the thermodynamic relationship between α-U 3 O 8 and its polymorph, β-U 3 O 8 . This research contributes new knowledge regarding the kinetics and mechanism of a previously described mechanochemical phase transition between the α- and β-U 3 O 8 polymorphs to improve the understanding of their thermodynamic relationship. In this work, tumble milling of α-U 3 O 8 using different milling media shows an ingrowth of the β-phase over time, with an observed correlation between media density, percent conversion and lattice strain. Anisotropic peak broadening observed within collected X-ray diffraction powder patterns suggests the preservation of uranium polyhedral layered sheets throughout the milling process. Preservation of the sheets implies a shear-induced slip mechanism occurring through in-plane shifting of uranium polyhedra along lattice planes perpendicular to the polyhedral sheets.
Ordering of different chalcogens, S, Se, and Te, on Au(111) exhibit broad similarities but also some distinct features, which must reflect subtle differences in relative values of the long-range pair and many-body lateral interactions between adatoms. We develop lattice-gas (LG) models within a cluster expansion framework, which includes about 50 interaction parameters. These LG models are developed based on density functional theory (DFT) analysis of the energetics of key adlayer configurations in combination with the Monte Carlo (MC) simulation of the LG models to identify statistically relevant adlayer motifs, i.e., model development is based entirely on theoretical considerations. The MC simulation guides additional DFT analysis and iterative model refinement. Given their complexity, development of optimal models is also aided by strategies from supervised machine learning. The model for S successfully captures ordering motifs over a broader range of coverage than achieved by previous models, and models for Se and Te capture the features of ordering, which are distinct from those for S. More specifically, the modeling for all three chalcogens successfully explains the linear adatom rows (also subtle differences between them) observed at low coverages of ~0.1 monolayer. The model for S also leads to a new possible explanation for the experimentally observed phase with a (5 × 5)-type low energy electron diffraction (LEED) pattern at 0.28 ML and to predictions for LEED patterns that would be observed with Se and Te at this coverage.
Recent studies demonstrate that low pressure chemical vapor deposition at 950 K leads to the synthesis of diamond-like boron carbides with high concentrations of boron (0.66 < x < 4) in which the sp 2 fraction depends on the boron concentration [1]. This indicates that the graphitic BC3 (g-BC3) phases obtained by chemical vapor deposition materials are mixtures of diamond-like and graphitic BCx phases. This finding allows us to revise the interpretation of the x-ray diffraction (XRD) patterns of the g-BC3 phases discussed previously [2, 3]. To support the new interpretation, we conducted a laser heating experiment of the g-BC3 phase. We found that after laser heating at 1100 K and 25 GPa in a diamond anvil cell (DAC) almost all graphitic layers of the g-BC3 transform into a cubic structure. The XRD pattern of the cubic BC3 phase (c-BC3) can be indexed with a cubic unit cell a = 3.619 (0.165) Å. Measurements of the equation of state of the g-BC3 phase demonstrated that boron atoms were incorporated into the graphitic B-C network. The linear compressibility along the c axis can be characterized by the value of the linear modulus Bc = 29.2 ± 1.8 GPa. Linear fitting of the experimental data for the a/a o parameter as a function of pressure gives us the value of the linear elastic modulus along the a axes: Ba = 800 ± 75 GPa.