Search NASA⌕ Search

SEARCH · Search NASA

Results for “Edge Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Aeroelastic Stability Assessment Methodology and Application to Slat Noise Treatments on the High-Lift Common Research Model

This work supports a larger effort at NASA to reduce airframe noise and, thus, environmental noise around airports. The leading-edge slat of conventional high-lift systems is a prominent source of airframe noise, and two technologies were previously identified as promising for noise reduction without significant aerodynamic or weight penalty: the slat cove filler (SCF) and the slat gap filler (SGF). NASA fabricated a 10%-scale semispan aircraft model for wind tunnel testing based upon the High-Lift Common Research Model (CRM-HL). NASA embarked on a test campaign with the 10% CRM-HL to determine the noise reduction effectiveness and other performance metrics of 3D SCF and SGF treatments in flow conditions representative of flight. The highly flexible SCF and SGF treatments posed a risk to the model and aeroelastic instability would compromise research integrity, so aeroelastic stability assessment was required. This work briefly describes the 10% CRM-HL, design of the SCF and SGF treatments to the model, and supporting fluid structure interaction (FSI) research. Relations for static and dynamic aeroelastic similitude are then developed for convenience of reference, and simplifications are introduced of particular utility to the cases considered in this study. The similitude relations are employed to assess the stability of the treatments under wind tunnel flow conditions based upon known behaviors from the supporting research. It is shown that the treatments are safe for test under the anticipated wind tunnel flow conditions with significant margins/factors of safety. It is furthermore demonstrated that the SCF is more susceptible to aeroelastic instability than the SGF, which has implications for flight feasibility.

Similitude↗

Resistive wall mode stability and resonant field amplification in MAST high beta plasma

The n=1 (n is the toroidal mode number) resistive wall mode (RWM) instability and the resonant field amplification (RFA) due to a stable RWM response are numerically investigated for a MAST high-pressure plasma scenario, utilizing the MARS-F (Liu Y.Q. et al 2000 Phys. Plasmas 7 3681) and MARS-K (Liu Y.Q. et al 2008 Phys. Plasmas 15 112503) codes, for the purpose of understanding the potential RWM behavior in MAST-U plasmas. Ideal kink stability analysis identifies a target plasma, with parameters similar to that of the reference equilibrium reconstructed from a MAST high-pressure discharge, that accesses the RWM regime. The unstable n=1 RWM for the target equilibrium is subject to strong damping by the plasma toroidal flow and/or the drift kinetic effects from thermal particles. As a result, the mode is found to be stable under the experimental flow conditions, or even without flow stabilization if drift kinetic stabilization is included. The stability prediction is robust against variation of the assumed resistive wall minor radius. Active magneto-hydrodynamic (MHD) spectroscopy modeling, using the magnetic coils designed for controlling the edge localized modes (ELMs) in MAST-U as the antenna, shows strong resonant field amplification due to a stable RWM response in the target plasma. Maximal amplification, of 6-7 times larger than the applied vacuum field within the plasma, is obtained assuming a coil phasing of 120-180 degrees between the upper and lower rows of the ELM control coils. The MHD-kinetic hybrid model predicts generally higher RFA than the fluid model, in particular near the low-field and high-field sides of the plasma boundary surface. Furthermore, the MARS-F/K modeling thus shows that the RWM in MAST-U is subject to strong flow and kinetic stabilization, but can nevertheless be detected by active MHD spectroscopy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterization of Unsteady Flow Structures Near Leading-Edge Slat: PIV Measurements - Part 1

A comprehensive computational and experimental study has been performed at the NASA Langley Research Center as part of the Quiet Aircraft Technology (QAT) Program to investigate the unsteady flow near a leading-edge slat of a two-dimensional, high-lift system. This paper focuses on the experimental effort conducted in the NASA Langley Basic Aerodynamics Research Tunnel (BART) where Particle Image Velocimetry (PIV) data was acquired in the slat cove and at the slat trailing edge of a three-element, high-lift model at 4, 6, and 8 degrees angle of attack and a freestream Mach Number of 0.17. Instantaneous velocities obtained from PIV images are used to obtain mean and fluctuating components of velocity and vorticity. The data show the recirculation in the cove, reattachment of the shear layer on the slat lower surface, and discrete vortical structures within the shear layer emanating from the slat cusp and slat trailing edge. Detailed measurements are used to examine the shear layer formation at the slat cusp, vortex shedding at the slat trailing edge, and convection of vortical structures through the slat gap. Selected results are discussed and compared with unsteady, Reynolds-Averaged Navier-Stokes (URANS) computations for the same configuration in a companion paper by Khorrami, Choudhari, and Jenkins (2004). The experimental dataset provides essential flow-field information for the validation of near-field inputs to noise prediction tools.

Jenkins, Luther N.↗

Scattering of plane guided waves obliquely incident on straight features

A semi-analytical finite element model is developed to study the scattering of plane guided waves obliquely incident on a straight geometric feature. The model is first used to investigate the reflection of the S0 mode from a free edge and the results are compared to those of bulk waves reflecting from a free boundary. The model is then used to predict the transmission of the S0 mode past an adhesively-bonded stiffener. The results obtained are in excellent agreement with experimental measurements.

42 ENGINEERING↗

Mechanics of anisotropic plates and shells - A new look at an old subject

A number of aspects of the mechanics of anisotropic plates and shells are discussed. The topics covered include computational models of anisotropic plates and shells, consequences of anisotropy on deformation couplings, symmetry types, stress concentrations and edge effects, and importance of transverse shear deformation; recent applications and recent advances in the modeling and analysis of anisotropic plates and shells; and new research directions.

Noor, A. K.↗

Massive separation and dynamic stall on a cusped trailing-edge airfoil

The cross-over from a predominantly attached two-dimensional flow to the bluff body form of separation is modeled via the interacting boundary layer approximation. The initial breakdown of the predominantly attached flow on a cusped trailing edge airfoil is examined using the Hilbert integral form of the unsteady interacting boundary layer equations. In addition, an interacting boundary layer technique is developed for calculating bluff body separation. This new model eliminates the severe scaling problems associated with bluff body separation through the use of a realistic inviscid eddy model, based on the infinite eddy Kirchhoff free-streamline description of separation. Brief consideration is given to the cross-over from bluff body separation to a predominantly attached flow, the extension to finite eddies and cascade flows, and the possible coupling with full, or parabolized, Navier-Stokes calculations.

Rothmayer, A. P.↗

HIS-TORIC: extending core ICRF wave simulation to include realistic SOL plasmas

Here, this paper presents a novel approach to incorporating an arbitrarily shaped edge scrape-off-layer (SOL) plasma and an ion cyclotron range of frequency (ICRF) antenna structure into existing core ICRF wave simulation models. We partition the entire computation domain into two sub-domains: a core and an edge region. Simulations in each domain are performed separately with appropriate numerical solvers. For the core, the TORIC ICRF solver (Brambilla 1999 Plasma Phys. Control. Fusion 41 1) was modified to impose an essential (Dirichlet) boundary condition at its interface with the edge domain. In the edge, a finite element method is used to solve a cold collisional plasma model. The domains are then joined together using the continuity boundary condition for the tangential electric and magnetic fields at their interfaces (Hybrid Integration of SOL to TORIC: HIS-TORIC). The model developed here was tested using an ICRH H minority heating scenario on the Alcator C-Mod tokamak (Hutchinson et al 1994 Phys. Plasmas 1 1511). The simulated pattern of core wave propagation agrees well with a standard TORIC simulation. This approach opens the possibility of using a realistic diverted SOL plasma and a complicated 3D RF antenna together with a rigorous hot core plasma model, while requiring only minimal modification to existing RF codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Heterometallic Actinide‐Containing Photoresponsive Metal‐Organic Frameworks: Dynamic and Static Tuning of Electronic Properties

Abstract Acquiring fundamental knowledge of properties of actinide‐based materials is a necessary step to create new possibilities for addressing the current challenges in the nuclear energy and nuclear waste sectors. In this report, we established a photophysics–electronics correlation for actinide‐containing metal‐organic frameworks (An‐MOFs) as a function of excitation wavelength, for the first time. A stepwise approach for dynamically modulating electronic properties was applied for the first time towards actinide‐based heterometallic MOFs through integration of photochromic linkers. Optical cycling, modeling of density of states near the Fermi edge, conductivity measurements, and photoisomerization kinetics were employed to shed light on the process of tailoring optoelectronic properties of An‐MOFs. Furthermore, the first photochromic MOF‐based field‐effect transistor, in which the field‐effect response could be changed through light exposure, was constructed. As a demonstration, the change in current upon light exposure was sufficient to operate a two‐LED fail‐safe indicator circuit.

Martin, Corey R.↗

Heterometallic Actinide-Containing Photoresponsive Metal-Organic Frameworks: Dynamic and Static Tuning of Electronic Properties

Acquiring fundamental knowledge of properties of actinide-based materials is a necessary step to create new possibilities for addressing the current challenges in the nuclear energy and nuclear waste sectors. Here in this report, we established a photophysics–electronics correlation for actinide-containing metal-organic frameworks (An-MOFs) as a function of excitation wavelength, for the first time. A stepwise approach for dynamically modulating electronic properties was applied for the first time towards actinide-based heterometallic MOFs through integration of photochromic linkers. Optical cycling, modeling of density of states near the Fermi edge, conductivity measurements, and photoisomerization kinetics were employed to shed light on the process of tailoring optoelectronic properties of An-MOFs. Furthermore, the first photochromic MOF-based field-effect transistor, in which the field-effect response could be changed through light exposure, was constructed. As a demonstration, the change in current upon light exposure was sufficient to operate a two-LED fail-safe indicator circuit.

36 MATERIALS SCIENCE↗

Atomic-scale mechanisms of helium bubble hardening in iron

Generation of helium due to (n,α) transmutation reactions changes the response of structural materials to neutron irradiation. The whole process of radiation damage evolution is affected by He accumulation and leads to significant changes in the material s properties. A population of nanometric He-filled bubbles affects mechanical properties and the impact can be quite significant because of their high density. Understanding how these basic mechanisms affect mechanical properties is necessary for predicting radiation effects. In this paper we present an extensive study of the interactions between a moving edge dislocation and bubbles using atomic-scale modeling. We focus on the effect of He bubble size and He concentration inside bubbles. Thus, we found that ability of bubbles to act as an obstacle to dislocation motion is close to that of voids when the He-to-vacancy ratio is in the range from 0 to 1. A few simulations made at higher He contents demonstrated that the interaction mechanism is changed for over-pressurized bubbles and they become weaker obstacles. The results are discussed in light of post-irradiation materials testing.

36 MATERIALS SCIENCE↗

Substitutional Doping Widens Silicene Gap

A numerical study of electronic transport properties of doped silicene is presented. By means of ab initio calculations a self-consistent scattering potential is derived for boron, nitrogen, aluminium, and phosphorus substitutions in silicene, and the quantum-mechanical Landauer-Büttiker approach is used to evaluate the conductivities of doped silicene ribbons with various impurity concentrations. An individual defect introduces asymmetric electronhole conductivities that depend both on the type of doping and the position of the foreign atom with respect to the edges. Quantum interference effects at zero temperature are modeled to show that randomly distributed defects over 1 mm long and realistically wide silicon nanoribbons widen the intrinsic electr onic gap that arises from quantum confinement. Mobility gaps created at low doping rates may lead to greater efficiency in the design of new silicon-based devices, providing the ability for suitable control of silicon ribbons band gap.

Lopez-Bezanilla, Alejandro↗

Intrinsic rotation produced by ion orbit loss and X-loss

A practical calculation model for the intrinsic rotation imparted to the edge plasma by the directionally preferential loss of ions on orbits that cross the last closed flux surface is presented and applied to calculate intrinsic rotation in several DIII-D [J. Luxon, Nucl. Fusion 42, 614 (2002)] discharges. The intrinsic rotation produced by ion loss is found to be sensitive to the edge temperature and radial electric field profiles, which has implications for driving intrinsic rotation in future large tokamaks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Determination of structure tilting in magnetized plasmas—Time delay estimation in two dimensions

Time delay estimation (TDE) is a well-known technique to investigate poloidal flows in fusion plasmas. The present work is an extension of the earlier works of Bencze and Zoletnik [Phys. Plasmas 12, 052323 (2005)] and Tal et al.[Phys. Plasmas 18, 122304 (2011)]. From the prospective of the comparison of theory and experiment, it seems to be important to estimate the statistical properties of the TDE based on solid mathematical groundings. This paper provides analytic derivation of the variance of the TDE using a two-dimensional model for coherent turbulent structures in the plasma edge and also gives an explicit method for determination of the tilt angle of structures. As a demonstration, this method is then applied to the results of a quasi-2D Beam Emission Spectroscopy measurement performed at the TEXTOR tokamak.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Oxidation of step edges on vicinal 4H-SiC(0001) surfaces

The oxidation processes of stepped SiC(0001) surfaces are studied within the ab initio atomistic thermodynamics approach. Our calculations show that a one-dimensional -Si-O- chain structure as a precursor for oxide growth on stepped SiC surfaces is formed along the step edge, promoting further oxidation of the step edges. Following the modified Deal-Grove oxidation model, we also find that the oxidation rate at steps is higher than that at terraces by three orders of magnitude. These findings give a reasonable explanation for the oxide thickness fluctuation between the step and the terrace observed in the previous experiments.

36 MATERIALS SCIENCE↗

Effect of the plasma shapes on intrinsic rotation due to collisionless ion orbit loss in the tokamak edge plasmas

Distribution of the intrinsic rotation due to collisionless ion orbit loss near the tokamak edge region is studied by using an analytical model based on ion guiding center orbit approximation. A peak of the averaged ion orbit loss momentum fraction is found very near inside the separatrix region in a double null divertor configuration but is not found inside the last closed flux surface region in an outer limiter configuration. For the double null divertor configuration, the intrinsic rotation due to ion orbit loss depends on the plasma shape. With the increase in elongation and triangularity, the peak of the averaged ion orbit loss momentum fraction increases and it moves inward for the lower plasma current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-speed nanoscale characterization of dewetting via dynamic transmission electron microscopy

The dewetting of thin films can occur in either the solid or the liquid state for which different mass transport mechanisms are expected to control morphological changes. Traditionally, dewetting dynamics have been examined on time scales between several seconds to hours, and length scales ranging between nanometers and millimeters. The determination of mass transport mechanisms on the nanoscale, however, requires nanoscale spatial resolution and much shorter time scales. This study reports the high-speed observation of dewetting phenomena for kinetically constrained Ni thin films on crystalline SrTiO{sub 3} substrates. Movie-mode Dynamic Transmission Electron Microscopy (DTEM) was used for high-speed image acquisition during thin film dewetting at different temperatures. DTEM imaging confirmed that the initial stages of film agglomeration include edge retraction, hole formation, and growth. Finite element modeling was used to simulate temperature distributions within the DTEM samples after laser irradiation with different energies. For pulsed laser irradiation at 18 μJ, experimentally observed hole growth suggests that Marangoni flow dominates hole formation in the liquid nickel film. After irradiation with 13.8 μJ, however, the observations suggest that dewetting was initiated by nucleation of voids followed by hole growth through solid-state surface diffusion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low-frequency ultrasonic Bessel-like collimated beam generation from radial modes of piezoelectric transducers

We present a very simple approach to generate a collimated ultrasonic beam that exploits the natural Bessel-like vibration pattern of the radial modes of a piezoelectric disc with lateral clamping. This eliminates the need for the conventional annular Bessel pattern of the electrodes with individual electrode excitation on the piezo-disc, thus simplifying the transducer design. Numerical and experimental studies are carried out to investigate the Bessel-like vibration patterns of these radial modes showing an excellent agreement between these two studies. Measured ultrasonic beam- pro les in water from the radial modes con rm the profile to be a Bessel beam. Collimated beam generation from radial modes is investigated using a coupled electromechanical finite-element model. It is found that clamping the lateral edges of piezoelectric transducers results in a high-degree of collimation with practically no side-lobes similar to a parametric array beam. Ultrasonic beam- profile measurements in water with both free and clamped piezoelectric transducer are presented. The collimated beam generation using the present technique of using the laterally clamped radial modes finds significant applications in low-frequency imaging through highly attenuating materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Validating Intra-Plate Power Distributions in the Advanced Test Reactor

We report that the neutronics software, HELIOS, was validated in 2015 for performing core reload design and safety analysis of the Advanced Test Reactor. However, when HELIOS was benchmarked against historic fission-wire measurements (i.e., zero-power full-core measurements) a statistically resolved calculation-to-measurement bias was discovered. The azimuthal power along each fuel plate computed by HELIOS has consistently shown to under-predict measurements made by fission-wires in historic zero-power tests near the fuel element side-plates. It was hypothesized during the HELIOS software validation work, that this bias is attributable to local moderation in coolant vents in the side-plates axially just above and below the fission-wires on the fuel-plate edges. This work used detailed MCNP and MC21 models of the side-plate vents to test this hypothesis. By comparing the average azimuthal biases between HELIOS, and 2D and 3D MCNP models, and a 3D MC21 model, it was found that the HELIOS azimuthal bias is not due to the measurement.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗