Search NASA⌕ Search

SEARCH · Search NASA

Results for “Explanability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

The preparation and phase diagrams of ( 7 Li 1-x Fe x OD)FeSe and (Li 1-x Fe x OH)FeSe superconductors

We report the phase diagram for the superconducting system ( 7 Li 1-x Fe x OD)FeSe and contrast it with that of (Li 1-x Fe x OH)FeSe both in single crystal and powder forms. Samples were prepared via hydrothermal methods and characterized by laboratory and synchrotron X-ray diffraction, high-resolution neutron powder diffraction (NPD), and high intensity NPD. We find a correlation between the tetragonality of the unit cell parameters and the critical temperature, Tc, which is indicative of the effects of charge doping on the lattice and formation of iron vacancies in the FeSe layer. We observe no appreciable isotope effect on the maximum Tc in substituting H by D. The NPD measurements definitively rule out an antiferromagnetic ordering in the non-superconducting (Li 1-x Fe x OD)FeSe samples below 120 K, which has been reported in non-superconducting (Li 1-x Fe x OH)FeSe. A likely explanation for the observed antiferromagnetic transition in (Li 1-x Fe x OH)FeSe samples is the formation of impurities during their preparation such as Fe 3 O 4 and Li x FeO 2 , which express a charge ordering transition known as the Verwey transition near 120 K. The concentration of these oxide impurities is found to be dependent on the concentration of the lithium hydroxide reagent and the use of H 2 O vs. D 2 O as the solvent during synthesis. We also describe the reaction conditions that lead to some of our superconducting samples to exhibit ferromagnetism below T c .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure-induced phase transitions of β-type pyrochlore CsTaWO 6

The β-type pyrochlore CsTaWO 6 was studied by synchrotron X-ray diffraction (XRD) and Raman scattering methods up to pressures of 43 GPa using a diamond anvil cell (DAC). With increasing pressure, the cubic pyrochlore in space group of Fd-3¯m with combining macron]m transforms to an orthorhombic structure (space group: Pnma) at 5.9 GPa and then to a monoclinic structure (space group: P2 1 /c) at ~18 GPa. The structural evolution in CsTaWO 6 is a continuous process and experimental results suggest that the initial cubic phase has a tetragonal distortion at ambient conditions. Both XRD and Raman measurements indicate that the pressure-induced phase transitions in CsTaWO 6 are reversible. Lastly, these results may provide a structural explanation of previous experimental resistivity measurement results for the isostructural superconductor K(Cs)Os 2 O 6 at high pressure conditions.

36 MATERIALS SCIENCE↗

Influence of defects and dopants on the photovoltaic performance of Bi 2 S 3 : First-principles insights

Bi 2 S 3 has attracted extensive attention recently as a light-absorber, sensitizer or electron acceptor material in various solar cells. Using first-principles calculations, we find that the photovoltaic efficiency of Bi 2 S 3 solar cells is limited by its intrinsic point defects, i.e., both S vacancy and S interstitial can have high concentration and produce deep defect levels in the bandgap, leading to non-radiative recombination of electron–hole carriers and reduced minority carrier lifetime. Unexpectedly most of the intrinsic defects in Bi 2 S 3 , including even the S interstitial, act as donor defects, explaining the observed n-type conductivity and also causing the high p-type conductivity impossible thermodynamically. Doping in Bi 2 S 3 by a series of extrinsic elements is studied, showing that most of the dopant elements such as Cu, Br and Cl make the material even more n-type and only Pb doping makes it weakly p-type. Based on this, we propose that the surface region of n-type Bi 2 S 3 nanocrystals in p-PbS/n-Bi 2 S 3 nano-heterojunction solar cells may be type-inverted into p-type due to Pb doping, with a buried p–n junction formed in the Bi 2 S 3 nanocrystals, which provides a new explanation to the longer carrier lifetime and higher efficiency. Lastly, considering the relatively low conduction band and high n-type conductivity, we predict that Cu, Br and Cl doped Bi 2 S 3 may be an ideal n-type electron acceptor or counter electrode material, while the performance of Bi 2 S 3 as a light-absorber or sensitizer material is intrinsically limited.

36 MATERIALS SCIENCE↗

On the mobility of carriers at semi-coherent oxide heterointerfaces

In the quest to develop new materials with enhanced ionic conductivity for battery and fuel cell applications, nano-structured oxides have attracted attention. Experimental reports indicate that oxide heterointerfaces can lead to enhanced ionic conductivity, but these same reports cannot elucidate the origin of this enhancement, often vaguely referring to pipe diffusion at misfit dislocations as a potential explanation. However, this highlights the need to understand the role of misfit dislocation structure at semi-coherent oxide heterointerfaces in modifying carrier mobilities. Here, we use atomistic and kinetic Monte Carlo (KMC) simulations to develop a model of oxygen vacancy migration at SrTiO 3 /MgO interfaces, chosen because the misfit dislocation structure can be modified by changing the termination chemistry. We use atomistic simulations to determine the energetics of oxygen vacancies at both SrO and TiO 2 terminated interfaces, which are then used as the basis of the KMC simulations. While this model is approximate (as revealed by select nudged elastic band calculations), it highlights the role of the misfit dislocation structure in modifying the oxygen vacancy dynamics. We find that oxygen vacancy mobility is significantly reduced at either interface, with slight differences at each interface due to the differing misfit dislocation structure. Here, we conclude that if such semi-coherent oxide heterointerfaces induce enhanced ionic conductivity, it is not a consequence of higher carrier mobility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influences of the molecular fuel structure on combustion reactions towards soot precursors in selected alkane and alkene flames

In this paper, we experimentally investigate the high-temperature oxidation kinetics of n-pentane, 1-pentene and 2-methyl-2-butene (2M2B) in a combustion environment using flame-sampling molecular beam mass spectrometry. The selected C 5 fuels are prototypes for linear and branched, saturated and unsaturated fuel components, featuring different C–C and C–H bond structures. It is shown that the formation tendency of species, such as polycyclic aromatic hydrocarbons (PAHs), yielded through mass growth reactions increases drastically in the sequence n-pentane < 1-pentene < 2M2B. This comparative study enables valuable insights into fuel-dependent reaction sequences of the gas-phase combustion mechanism that provide explanations for the observed difference in the PAH formation tendency. First, we investigate the fuel-structure-dependent formation of small hydrocarbon species that are yielded as intermediate species during the fuel decomposition, because these species are at the origin of the subsequent mass growth reaction pathways. Second, we review typical PAH formation reactions inspecting repetitive growth sequences in dependence of the molecular fuel structure. Third, we discuss how differences in the intermediate species pool influence the formation reactions of key aromatic ring species that are important for the PAH growth process underlying soot formation. Finally, as a main result it was found that for the fuels featuring a C=C double bond, the chemistry of their allylic fuel radicals and their decomposition products strongly influences the combination reactions to the initially formed aromatic ring species and as a consequence, the PAH formation tendency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of low temperature chlorine atom initiated oxidation of methyl and ethyl butyrate using synchrotron photoionization TOF-mass spectrometry

The initial oxidation products of methyl butyrate (MB) and ethyl butyrate (EB) are studied using a time- and energy-resolved photoionization mass spectrometer. Reactions are initiated with Cl˙ radicals in an excess of oxygen at a temperature of 550 K and a pressure of 6 Torr. Ethyl crotonate is the sole isomeric product that is observed from concerted HO 2 -elimination from initial alkylperoxy radicals formed in the oxidation of EB. Analysis of the potential energy surface of each possible alkylperoxy radical shows that the CH 3 CH(OO)CH 2 C=O)OCH 2 CH 3 (RγO 2 ) and CH 3 CH 2 CH(OO)C(=O)OCH 2 CH 3 (R β O 2 ) radicals are the isomers that could undergo this concerted HO 2 -elimination. Two lower-mass products (formaldehyde and acetaldehyde) are observed in both methyl and ethyl butyrate reactions. Secondary reactions of alkylperoxy radicals with HO 2 radicals can decompose into the aforementioned products and smaller radicals. As a result, these pathways are the likely explanation for the formation of formaldehyde and acetaldehyde.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Forty years of temporal analysis of products

Detailed understanding of mechanisms and reaction kinetics are required in order to develop and optimize catalysts and catalytic processes. While steady state investigations are known to give a global view of the catalytic system, transient studies are invaluable since they can provide more detailed insight into elementary steps. For almost thirty years temporal analysis of products (TAP) has been successfully utilized for transient studies of gas phase heterogeneous catalysis, and there have been a number of advances in instrumentation and numerical modeling methods in that time. In the current work, the range of available TAP apparatus will be discussed while detailed explanations of the types of TAP experiment, the information that can be determined from these experiments and the analysis methods are also included. TAP is a complex methodology and is often viewed as a niche specialty. Here, part of the intention of this work is to highlight the significant contributions TAP can make to catalytic research, while also discussing the issues which will make TAP more relevant and approachable to a wider segment of the catalytic research community. With this in mind, an outlook is also disclosed for the technique in terms of what is needed to revitalize the field and make it more applicable to the recent advances in catalyst characterization (e.g. operando modes ).

36 MATERIALS SCIENCE↗

The activation of carbon dioxide by first row transition metals (Sc – Zn)

The activation of CO2 by chloride-tagged first-row transition metal anions [ClM]- (M=Sc–Zn), was examined by mass spectrometry, quantum chemical calculations, and statistical analysis. The direct formation of [ClM(CO2)]- complexes was demonstrated in the reaction between [ClM] - and neutral CO2. In addition, the reverse reaction was investigated by energy-variable collisionally induced dissociation (CID) of the corresponding [ClM(CO2)]- anions generated in-source. Five different mono- and bi-dentate binding motifs present in the ion/CO2 complexes were identified by quantum chemical calculations and the relative stability of the each of these isomers was established and analyzed for all first-row transition metals based on the experimental and theoretical ion/molecule binding energies. It was found that the early first row transition metals form strong covalent bonds with the neutral CO2 molecule, while the late in particular copper and zinc are weakly bonded. Using simple valence bond Lewis diagrams, the binding motifs and their relative stabilities across the first row were described in a quantitative manner based on the electronic structure of the individual metals. This analysis provides an explanation for the change of most favorite bonding motif of the transition metals with CO2 along the 1st transition metal row. The nature of the activated CO2 complex and the relationship between its stability and other structural and spectral properties was also analyzed by Principal Component Analysis (PCA) and Artificial Neural Networks.

Blaziak, Kacper↗

Modeling of canonical and C2'- O -thiophenylmethyl modified hexamers of RNA. Insights into the nature of structural changes and thermal stability

Modifying the ribose ring or the nucleobase within oligonucleotides of RNA is a strategy that has regained attention due to its potential to provide chemical stability, increase affinity towards a target, or introduce groups with bioorthogonal reactivity, among other applications. However introducing groups via synthetic routes can be a daunting process and may result in unexpected physical properties and structural variations. In addition, characterizing the effects of a modification within an oligonucleotide can be time consuming and expensive, e.g., NMR, crystallography. Thus the development of models that are accurate, reasonably priced and carried out over short periods of time is essential to the development of this field. In this paper we report on the development and validation of computational models that explain the nature of the structural and stability changes induced by the presence of a C2'-O-methylthiophene group at various positions within duplexes conformed by two 6-mers of modified RNA as well as random coils containing the same modification(s). Through analysis of the obtained models it was concluded that the presence of the methylthiophene moiety on two strands of RNA induces a conformational change around the torsion angle (κ°) that leads to lower values in the pseudorotational angle (δ°), thus resulting in an A-form α-helix with shorter distances between phosphates than those in canonical RNA. These results provide a reasonable explanation for the experimental observations, which display the thermal stabilization of the duplexes, and are guiding efforts from our groups to control the structure and function of RNA, i.e., via functionalization of the RNA structure for attaining thermal stability while retaining the structural properties of an A-form duplex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanism for spontaneous oxygen and hydrogen evolution reactions on CoO nanoparticles

Overall photocatalytic water splitting with a high efficiency of ~5% has recently been observed for CoO nanoparticle suspensions in the absence of an applied bias or co-catalyst. Although experimental measurements indicate that the overall photocatalytic water splitting is caused by optimal band edge alignments with respect to the redox potentials of water, the mechanism by which H 2 and O 2 simultaneously evolve on these nanoparticles is unknown. Here, we used first-principles density functional theory (DFT) calculations to elucidate the mechanisms for the charge separation and H 2 and O 2 evolution on CoO nanoparticles under illumination in aqueous solution. We demonstrated that electrons are driven to the CoO(100) facet and holes are driven to the hydroxylated CoO(111) facet (OH*–CoO(111)) as a result of the built-in potential arising from the difference in the band edge positions on the two facets. Furthermore, based on a set of criteria, depending on if the photoexcited electrons and holes have sufficient energy to overcome the kinetic barrier along the H 2 and O 2 evolution reaction pathways, respectively, on the relevant surface facet, we show that H 2 evolution preferentially occurs on the CoO(100) facet, while O 2 evolution occurs on the OH*–CoO(111) surface. Our understanding of the overall water splitting mechanism on CoO nanoparticles provides a general explanation for the experimentally observed overall water splitting phenomena on a variety of self-standing photocatalysts, including γ-Ga 2 O 3 , Cu 2 O, and KTaO 3 , without an external driving potential or co-catalyst. In addition, we provide a new strategy for designing novel photocatalysts with high efficiency by controlling their surface configurations and morphologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Actinyl cation–cation interactions in the gas phase: an accurate thermochemical study

Gas phase actinyl cation–cation interactions (CCIs) were studied by an accurate composite coupled cluster thermochemical approach for the first time. A number of CCI dimers were constructed from the monomers UO 2 2+ , UO 2 + , NpO 2 2+ , NpO 2 + , PuO 2 + , and AmO 2 + . All CCI dimers studied were calculated to be thermodynamically unstable, with dissociation energies ranging from -60 to -90 kcal mol -1 , but in many cases kinetic stability was indicated by calculated local minima with well depths as large as ~15 kcal mol-1. Most of the dimers studied involved a T-shaped geometry, although one side-on dimer, (UO2+) 2 , was included since it was amenable to coupled cluster methods. In the T-shaped isomers the most stable dimers were calculated to arise when the oxo-group of an An(V) actinyl cation was oriented towards the metal center of an An(VI) actinyl cation. For both mixed-valent An(VI)/An(V) and mono-valent An(V) dimers, the stability as estimated from the depth of the calculated local minimum decreased in the donor series U(V) > Np(V) > Pu(V) > Am(V). These trends correlate well with experimental trends in condensed phase CCIs. A rationale for the bonding in CCIs was investigated by carrying out charge transfer analyses using the natural bond orbital (NBO) method. Augmenting the usual Lewis acid-base explanation, CCIs are the direct result of a competition between charge transfer stabilization, which can be as much as 0.11e or 30.7 kcal mol -1 at equilibrium, and Coulombic repulsive destabilization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assimilation and transport of organic bound tritium in an irrigated pine forest

The speciation of radioactive tritium (T) in a naturally-established subtropical loblolly pine forest that has been irrigated with highly-contaminated pond water for the last 20 years is reported. This irrigation project was created to limit the underground transport of a tritium-rich plume which also contains low levels of toxic organics, metals and radionuclides such as carbon-14 ( 14 C) from a nearby low-level waste burial ground. The levels of tritiated water (HTO) in the wood cores were not influenced by recent irrigation activities. However, the tritium levels in the last 20 years of tree growth were more than 3-fold higher than that of tritium in the older growth. This was due to recent irrigation with organic-bound tritium (OBT)-rich water and subsequent accumulation of high levels tritium as OBT relative to tissue HTO. High levels of pond irrigation water OBT resulted from biogenic processes that converted HTO to OBT. Data for 14 C that were acquired for some of the forest materials indicated that the processes controlling the movement and accumulation of 14 C in this system are somewhat different than that of tritium. Spectroscopic characterization of tree core tissue of <20 years in age found no explanation for the unusually wide dark growth rings. Here, it was concluded that the trees were over-irrigated based on results from other published studies with wood from severely-flooded areas. Although HTO is indeed toxic to biota, OBT represents a relatively greater hazard to biota because it can be bioaccumulated and retained for long periods of time in living tissues.

54 ENVIRONMENTAL SCIENCES↗

Viscoelasticity in associating oligomers and polymers: experimental test of the bond lifetime renormalization model

Recent findings that the association bond lifetimes τ α* in associating polymers diverge from their supramolecular network relaxation times τ c challenge past theories. The bond lifetime renormalization proposed by Rubinstein and coworkers [Stukalin et al., Macromolecules, 2013, 46, 7525] provides a promising explanation. To examine systematically its applicability, we employ shear rheology and dielectric spectroscopy to study telechelic associating polymers with different main chain (polypropylene glycol and polydimethylsiloxane), molecular weight (below entanglement molecular weight) and end groups (amide, and carboxylic acid) which form dimeric associations by hydrogen bonding. The separation between τ c (probed by rheology) and τ α* (probed by dielectric spectroscopy) strongly increases with chain length as qualitatively predicted by the model. However, to describe the increase quantitatively, a transition from Rouse to reptation dynamics must be assumed. This suggests that dynamics of super-chains must be considered to properly describe the transient network.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical evidence of water serving as a promoter for lithium superoxide disproportionation in Li-O 2 batteries

Experimental evidence has demonstrated that the presence of water in non-aqueous electrolytes significantly affects Li-O 2 electrochemistry. Understanding the reaction mechanism for Li 2 O 2 formation in the presence of water impurities is important to understand Li-O 2 battery performance. A recent experiment has found that very small amounts of water (as low as 40 ppm) can significantly affect the product formation in Li-O 2 batteries as opposed to essentially no water (1 ppm). Although experimental as well as theoretical work has proposed mechanisms of Li 2 O 2 formation in the presence of much larger amounts of water, none of the mechanisms provide an explanation for the observations for very small amounts of water. In this work, density functional theory (DFT) was utilized to obtain a mechanistic understanding of the Li-O 2 discharge chemistry in a dimethoxyethane (DME) electrolyte containing an isolated water and no water. The reaction pathways for Li 2 O 2 formation from LiO 2 on a model system were carefully evaluated with different level of theories, i.e. PBE (PW), B3LYP/6-31G(2df,p), B3LYP/6-311++G(2df,p) and G4MP2. The results indicate that the LiO 2 disproportionation reaction to Li 2 O 2 can be promoted by the water in DME electrolyte, which explains why there is a significant difference compared to when no water is present in the experimentally observed discharge product distributions. Ab initio molecular dynamics calculations were also used to investigate the disproportionation of LiO 2 dimer in explicit DME. This work adds to the fundamental understanding of the discharge chemistry of a Li-O 2 battery.

25 ENERGY STORAGE↗

Curvature-induced hydrophobicity at imogolite–water interfaces

Imogolite, a nanotubular aluminosilicate mineral, is commonly found in volcanic soils, where it exerts a control on carbon dynamics. Synthetic imogolites are used for the removal of contaminants from industrial effluents and are considered for a range of other applications including gas adsorption and functionalised heterogeneous catalysts. In spite of their environmental and industrial relevance, the properties of imogolite–water interfaces remain poorly understood. In this work, an experimental and computational study is presented in which the structure and energetics of water are characterized on the curved external surface of imogolite and the hydrophilicity of this surface is contrasted with that of gibbsite, its planar counterpart. Atomic force spectroscopy experiments show that in spite of their identical surface structure, imogolite has a lower hygroscopicity than gibbsite. Molecular dynamics simulations provide an explanation for this observation: the curvature of imogolite prevents the formation of in-plane H-bonds along the directions of the nanotube circumference, lowering the enthalpy of adsorption of water molecules. The different arrangement of surface H-bonds and the resulting differences in hydration properties also affects the acidity constants of surface hydroxyl groups. This ‘nanotube effect’ may be relevant to other nanotubular systems with high curvatures, potentially impacting their wetting properties, their colloidal stability and their affinity towards hydrophobic organic moieties.

36 MATERIALS SCIENCE↗

A comparative study of Bi, Sb, and BiSb for electrochemical nitrogen reduction leading to a new catalyst design strategy

Recent studies identified Bi as one of the most promising non-noble metal elements that can promote the electrochemical N 2 reduction reaction (ENRR) to produce NH 3 . The electronic features that make Bi a promising ENRR catalyst may also be owned by Sb that belongs to the same group as Bi. Thus, the ENRR properties of Bi, Sb, and a BiSb alloy were investigated comparatively to identify common characteristics that facilitate the ENRR. These catalysts were prepared as uniform coating layers on high surface area carbon felt electrodes, which could serve as both regular electrodes and pseudo-gas diffusion electrodes. The experimental results demonstrated that while Bi and Sb show comparable ENRR performances, the formation of a BiSb alloy distinctively increases the faradic efficiency for NH 3 production. Additionally, the X-ray photoelectron spectroscopy results revealed that Bi in BiSb possesses a partial positive charge while Sb in BiSb possesses a partial negative charge, which can impact the way the catalyst surface interacts with the reactants and reaction intermediates of the ENRR and hydrogen evolution reaction (HER), the major competing reaction with the ENRR. Computational investigations including the Bader charge analysis and Gibbs free energy calculations for the elemental steps of the ENRR and HER provided an explanation of how the formation of a BiSb alloy can change the selectivity for the ENRR. The combined experimental and theoretical results and discussion contained in this study lead to a new strategy for designing efficient metal catalysts for the ENRR. Additionally, this study investigated how the use of gas phase and dissolved N 2 affected the ENRR performances of the Bi, Sb, and BiSb catalysts.

36 MATERIALS SCIENCE↗

Exploring the phase space of Zn 2 SbN 3 , a novel semiconducting nitride

The novel semiconductor Zn 2 SbN 3 is one of a growing list of ternary nitrides with promise for optoelectronic and energy applications. Previous work by Arca et al. [Materials Horizons, 2019, 6, 1669–1974] first reported synthesis of this material, but did not explore the effects of growth conditions on material formation. In this work, we present a semi-automated study of the relationship between growth conditions and crystallinity via high-throughput RF sputtering and a custom X-ray diffraction analysis routine. Zn 2 SbN 3 is found to crystallize in a wide range of growth conditions, and the formation of several contaminant phases is examined. Electron microscopy of these secondary phases, caused both by off-stoichiometry and by growth conditions, provides insight into the growth mechanisms of Zn 2 SbN 3 . Furthermore, computational work relates this material to other Zn-based ternary nitrides and offers an explanation for the difficulty of growing cation-ordered material despite the wide range of growth conditions explored.

36 MATERIALS SCIENCE↗