Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLAME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Model Validation for Propulsion - On the TFNS and LES Subgrid Models for a Bluff Body Stabilized Flame

This paper summarizes the reacting results of simulating a bluff body stabilized flame experiment of Volvo Validation Rig using a releasable edition of the National Combustion Code (NCC). The turbulence models selected to investigate the configuration are the sub-grid scaled kinetic energy coupled large eddy simulation (K-LES) and the time-filtered Navier-Stokes (TFNS) simulation. The turbulence chemistry interaction used is linear eddy mixing (LEM).

Flame↗

Model Validation for Propulsion - On the TFNS and LES Subgrid Models for a Bluff Body Stabilized Flame

With advances in computational power and availability of distributed computers, the use of even the most complex of turbulent chemical interaction models in combustors and coupled analysis of combustors and turbines is now possible and more and more affordable for realistic geometries. Recent more stringent emission standards have enticed the development of more fuel-efficient and low-emission combustion system for aircraft gas turbine applications. It is known that the NOx emissions tend to increase dramatically with increasing flame temperature. It is well known that the major difficulty, when modeling the turbulence-chemistry interaction, lies in the high non-linearity of the reaction rate expressed in terms of the temperature and species mass fractions. The transport filtered density function (FDF) model and the linear eddy model (LEM), which both use local instantaneous values of the temperature and mass fractions, have been shown to often provide more accurate results of turbulent combustion. In the present, the time-filtered Navier-Stokes (TFNS) approach capable of capturing unsteady flow structures important for turbulent mixing in the combustion chamber and two different subgrid models, LEM-like and EUPDF-like, capable of emulating the major processes occurring in the turbulence-chemistry interaction will be used to perform reacting flow simulations of a selected test case. The selected test case from the Volvo Validation Rig was documented by Sjunnesson.

bluff body↗

Recent Research on Flames of Gaseous Fuel Aboard the International Space Station

Research for a set of six independent experiments with flames of gaseous fuels has been carried out on the International Space Station (ISS) since 2017 using the Combustion Integrated Rack (CIR) and a set of modular hardware. While ISS testing has been completed for most of the studies in the Advanced Combustion via Microgravity Experiments (ACME) project, it is expected to continue into 2022. The objectives and selected findings for each investigation are briefly discussed after a short review of the advantages of studying combustion in microgravity, previous research conducted in space, and the experimental hardware and its operation.

Flame↗

Recent Research on Flames of Gaseous Fuel Aboard the International Space Station

Research for a set of six independent experiments with flames of gaseous fuels has been carried out on the International Space Station (ISS) since 2017 using the Combustion Integrated Rack (CIR) and a set of modular hardware. While ISS testing has been completed for most of the studies in the Advanced Combustion via Microgravity Experiments (ACME) project, it is expected to continue into 2022. The objectives and selected findings for each investigation are briefly discussed after a short review of the advantages of studying combustion in microgravity, previous research conducted in space, and the experimental hardware and its operation.

Flame↗

10-kHz PLIF Thermometry for a Turbulent Jet Flame using Single Burst-mode OPO

Two-color Planar laser-induced fluorescence (TC-PLIF) thermometry techniques that employ two laser systems and two cameras face challenges when implemented in practical combustion facilities because of experimental complexity and multiple laser and camera requirements, particularly for high-speed TC-PLIF. To circumvent those problems, we developed a fast, dual-wavelength switching, burst-mode OPO technology to significantly reduce the experimental complexity of high-speed TC-PLIF thermometry and simplify its implementation in harsh combustion and flow test facilities. A fast, dual-wavelength switched seed laser enabled a high-energy, high-repetition-rate burst-mode laser to generate two 10-kHz pulse trains at wavelengths of ~354.8 nm. The injection-seeded OPO efficiently converts the burst-mode laser output to285.62 nm and 285.67 nm to excite the Q2(12) and P1(8) OH transitions. PLIF images were collected from each of the two excitation transitions with a single camera and an UV intensifier, and intensity ratios from the images were used to determine local temperatures. Ten kHz hydroxyl radical (OH) TC-PLIF for premixedCH4/Air/H2 jet flame was demonstrated.

thermometry↗

10-kHz PLIF Thermometry for Turbulent Jet Flame using Single Burst-mode OPO

Two-color Planar Laser-Induced Fluorescence (TC-PLIF) thermometry techniques that employ two laser systems and two cameras face challenges when implemented in practical combustion facilities because of experimental complexity and multiple laser and camera requirements, particularly for high-speed TC-PLIF. To circumvent those problems, we developed a fast, dual-wavelength switching, burst-mode OPO technology to significantly reduce the experimental complexity of high-speed TC-PLIF thermometry and simplify its implementation in harsh combustion and flow test facilities. A fast, dual-wavelength switched seed laser enabled a high-energy, high-repetition-rate burst-mode laser to generate two 10-kHz pulse trains at wavelengths of ~354.8 nm. The injection-seeded OPO efficiently converts the burst-mode laser output to 285.62 nm and 285.67 nm to excite the Q2(12) andP1(8) OH transitions. PLIF images were collected from each of the two excitation transitions with a single camera and an UV intensifier, and intensity ratios from the images were used to determine local temperatures. Ten kHz hydroxyl radical (OH) TC-PLIF for premixedCH4/Air/H2 jet flame was demonstrated.

thermometry↗

Flames with repetitive extinction and ignition in a micro flow reactor with a controlled temperature profile at engine-relevant conditions

In this paper, combustion in a narrow channel with an imposed temperature gradient is studied numerically at elevated pressure with engine-relevant fuels. The focus is placed on unsteady flames with repetitive extinction and ignition (FREI) to determine the potential of this regime for fuel testing. It is shown that the FREI regime does occur at elevated pressures for sufficiently small tube diameters. The sensitivity of the extinction and ignition temperatures to low-temperature chemistry is found to be significantly enhanced at 25 bar compared to atmospheric conditions. The ignition and extinction temperatures differ by up to 100 K between PRF mixtures with varying octane numbers. Ternary mixtures of iso-octane/n-heptane/toluene and iso-octane/n-heptane/ethanol at similar RON and MON are also studied. Finally, differences in ignition and extinction temperatures further illustrate the potential of combustion in a narrow channel to distinguish between engine-relevant fuels.

42 ENGINEERING↗

Flame-made durable doped-CaO nanosorbents for CO{sub 2} capture

The present study deals with the design and development of novel calcium-oxide-based refractory sorbents synthesized by flame spray pyrolysis (FSP) for carbon dioxide capture. The FSP-derived sorbents inherently exhibit very large CO{sub 2} uptake capacity in the present investigation. Sorbents derived from conventional wet chemistry, possessing identical composition, were synthesized and evaluated. A wide range of refractory dopants (Si, Ti, Cr, Co, Zr, and Ce) were employed, aiming at developing sorbents with good mechanical strength. Among all of the doped CaO sorbents, Zr-doped CaO was found to exhibit the best CO{sub 2}-capture performance under identical conditions of operation. To study the effect of Zr in depth and find out the optimal concentration of Zr needed in the CaO matrix, a series of Zr-incorporated CaO sorbents were synthesized by varying the relative composition of Zr in the CaO base matrix. The present studies suggest that Zr/Ca in the 3:10 atomic ratio results in the formation of the most robust nanosorbent for multicyclic operation. This sorbent retained, unchanged, its ability to capture CO{sub 2} during extended cycles. It also demonstrated excellent stability under operating in the presence of water vapor (10 vol %). The present paper represents two novel developments in the field of CO{sub 2} capture, first, the superiority of FSP process and, second, the role of ZrO{sub 2} dopant in improving the durability and robustness of the CaO-based sorbent. 29 refs., 11 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Species identification in a laminar premixed low-pressure flame of morpholine as a model substance for oxygenated nitrogen-containing fuels.

The combustion chemistry of morpholine (1-oxa-4-aza-cyclohexane) was investigated under laminar, premixed low-pressure conditions. Morpholine, as a heterocyclic secondary amine with numerous industrial applications, was studied as a model fuel which simultaneously contains oxygen and nitrogen heteroatoms. Stable and radical intermediates and products of the combustion process in a slightly fuel-rich {phi} = 1.3 (C/O = 0.41) flat premixed morpholine-oxygen-argon flame at 40 mbar (4 kPa) were identified. A detailed fuel destruction scheme is proposed based on combined measurements using two different in situ molecular beam mass spectrometry (MBMS) techniques. The results are discussed with special attention to hydrocarbon, oxygenated and N-containing compounds important in pollutant emission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Complete carbon analysis of sulfur-containing mixtures using postcolumn reaction and flame ionization detection

Quantitative analysis of complex mixtures containing hundreds-to-thousands of organic compounds rich in heteroatoms, including oxygen, sulfur, and nitrogen, is a major challenge in the fuel, food, and chemical industries. In this work, a two-stage (oxidation and methanation) catalytic process in a 3-D–printed metal microreactor was evaluated for its capability to convert sulfur-containing organic compounds to methane. The microreactor was inserted into a gas chromatograph between the capillary column and flame ionization detector. Catalytic conversion of all sulfur-containing analytes to methane enabled carbon quantification without calibration, by the method identified as “quantitative carbon detection” or QCD. Quantification of tetrahydrothiophene, dimethyl sulfoxide, diethyl sulfide, and thiophene indicated complete conversion to methane at 450°C. Long-term performance of a commercial microreactor was evaluated for 2000 consecutive injections of sulfur-containing organic analytes. The sulfur processing capacity of the microreactor was identified experimentally, after which reduced conversion to methane was observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗