Search NASA⌕ Search

SEARCH · Search NASA

Results for “Flow path”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Application of temporal moments and other signal processing algorithms to analysis of ultrasonic signals through melting wax

Ultrasonic analysis is being explored as a way to capture events during melting of highly dispersive wax. Typical events include temperature changes in the material, phase transition of the material, surface flows and reformations, and void filling as the material melts. Melt tests are performed with wax to evaluate the usefulness of different signal processing algorithms in capturing event data. Several algorithm paths are being pursued. The first looks at changes in the velocity of the signal through the material. This is only appropriate when the changes from one ultrasonic signal to the next can be represented by a linear relationship, which is not always the case. The second tracks changes in the frequency content of the signal. The third algorithm tracks changes in the temporal moments of a signal over a full test. This method does not require that the changes in the signal be represented by a linear relationship, but attaching changes in the temporal moments to physical events can be difficult. This study describes the algorithm paths applied to experimental data from ultrasonic signals as wax melts and explores different ways to display the results.

36 MATERIALS SCIENCE↗

3D numerical modeling of the carrier transport and radiative efficiency for InGaN/GaN light emitting diodes with V-shaped pits

In this paper, influence of a V-pit embedded inside the multiple quantum wells (MQWs) LED was studied. A fully three-dimensional stress-strain solver and Poisson-drift-diffusion solver are employed to study the current path, where the quantum efficiency and turn-on voltage will be discussed. Our results show that the hole current is not only from top into lateral quantum wells (QWs) but flowing through shallow sidewall QWs and then injecting into the deeper lateral QWs in V-pit structures, where the V-pit geometry provides more percolation length for holes to make the distribution uniform along lateral MQWs. The IQE behavior with different V-pit sizes, threading dislocation densities, and current densities were analyzed. Substantially, the variation of the quantum efficiency for different V-pit sizes is due to the trap-assisted nonradiative recombination, effective QW ratio, and ability of hole injections.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

THE PRECESSION OF THE HERBIG-HARO 111 FLOW IN THE INFRARED

We present Spitzer Infrared Array Camera images of the Herbig-Haro (HH) 111 outflow that show a wealth of condensations/knots in both jet and counterjet. Studying the positional distribution of these knots, we find very suggestive evidence of a mirror symmetric pattern in the jet/counterjet flow. We model this pattern as the result of an orbital motion of the jet source around a binary companion. From a fit of an analytic, ballistic model to the observed path of the HH 111 system, we find that the motion in a binary with two {approx}1 M{sub sun} stars (one of them being the HH 111 source), in a circular orbit with a separation of {approx}186 AU, would produce the mirror symmetric pattern seen in the outflow.

79 ASTRONOMY AND ASTROPHYSICS↗

Progress Report on Model Development for Aerosol Transport through Divergent Cracks Paths

This report summarizes the progress in developing a phenomenological model of aerosol transport, deposition, and plugging through microchannels. The purpose of this effort is to introduce to a user community—involving researchers, regulators, and industry—a generic, reliable numerical model for the prediction of aerosol transport while accounting for potential deposition and plugging of the leak paths to model spent nuclear fuel (SNF) release from postulated Stress Corrosion Cracks in canisters under storage or transportation. Current work focuses on expanding the model to predict aerosol (and gas) flow through complex microchannel (nozzle) geometries in addition to the rectangular and cylindrical geometries, as we approach more realistic Stress Corrosion Crack conditions. In this regard, a divergent nozzle geometry, used at Sandia National Laboratories (SNL) for testing aerosol release and retention (Durbin et al. 2021), was added to the model. The model was then validated with blowdown data for the particular microchannel, from experiments conducted at SNL. The report also presents preliminary non-benchmarked aerosol penetration fraction and mass flow rate for a monodisperse 10-micron (AED) particle concentration of 1.7e-08 kg/m 3 being released through the divergent microchannel geometry from the SNL’s aerosol experimental tank setup.Future work will involve validating the aerosol model and updating the model’s Graphical User Interface (GUI) to include the divergent nozzle geometry. This is expected to help stakeholders perform quick and easy first principles calculations without needing to understand the underlying MATLAB script.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The Vega balloon experiments

The goals of the Vega-1 and -2 experiments were to trace the large- and small-scale motions, measure the turbulent heat and momentum flow in the cloud layer, and determine the physical parameters of the Venus atmosphere. The arrangement of the balloon-probe payload, the balloon-deployment sequence, and the balloon flight paths are described. The balloons drifted latitudinally in the Venus atmosphere about one-third the way around the planet at a height of 53-54 km and speeds close to 67 m/sec. The balloon-probe signals, recorded on earth by radio telescopes of ten countries, are being processed.

Sagdeev, R. Z.↗

Progress toward evaluating the sustainability of switchgrass production as a bioenergy crop using the SWAT model

Adding bioenergy to the US energy portfolio requires long-term profitability for bioenergy producers and the long-term protection of affected ecosystems. In this study, we present steps along the path towards evaluating both sides of the sustainability equation (production and environmental) for switchgrass (Panicum virgatum) using the Soil and Water Assessment Tool (SWAT). We modeled production of switchgrass and river flow using SWAT for current landscapes at a regional scale. To quantify feedstock production, we compared lowland switchgrass yields simulated by SWAT with estimates from a model based on empirical data for the eastern US. Geographic patterns were very similar. Average yields reported in field trials tended to be higher than average SWAT-predicted yields, which may nevertheless be more representative of production-scale yields. As a preliminary step toward quantifying bioenergy-related changes in water quality, we evaluated flow predictions by the SWAT model for the Arkansas-Red-White river basin. Monthly SWAT flow predictions were compared to USGS measurements from 86 subbasins across the region. Although agreement was good, analysis of residuals (functional validation) identified patterns to guide future improvements. Our next step will be to continue model improvement, after which we will forecast changes in water quality associated with incorporating bioenergy crops into future landscapes. This analysis will help us, in future, to identify areas with the highest economic and environmental potential for feedstock production.

54 ENVIRONMENTAL SCIENCES↗

A Selectivity based approach to Continuous Pattern Detection in Streaming Graphs

Cyber security is one of the most significant technical challenges in current times. Detecting adversarial activities, prevention of theft of intellectual properties and customer data is a high priority for corporations and government agencies around the world. Cyber defenders need to analyze massive-scale, high-resolution network flows to identify, categorize, and mitigate attacks involving networks spanning institutional and national boundaries. Many of the cyber attacks can be described as subgraph patterns, with prominent examples being insider infiltrations (path queries), denial of service (parallel paths) and malicious spreads (tree queries). This motivates us to explore subgraph matching on streaming graphs in a continuous setting. The novelty of our work lies in using the subgraph distributional statistics collected from the streaming graph to determine the query processing strategy. We introduce a ``Lazy Search" algorithm where the search strategy is decided on a vertex-to-vertex basis depending on the likelihood of a match in the vertex neighborhood. We also propose a metric named ``Relative Selectivity" that is used to select between different query processing strategies. Our experiments performed on real online news, network traffic stream and a synthetic social network benchmark demonstrate 10-100x speedups over non-incremental, selectivity agnostic approaches.

dynamic graphs↗

There and Back Again: Reimagining Cryogenic Cooling for Scalable Arrays of Dilution Refrigerators for future Quantum Datacenters

While pulse tube cryocoolers enabled the rapid expansion of dilution refrigerator technology over the past two decades, the transition to large-scale quantum systems is now driving a reassessment of the DR’s higher-temperature-stage cooling strategies and how these systems can be effectively scaled in a modular way. Quasi-wet architectures based on centralized cryoplants and forced-flow helium distribution offer compelling advantages in energy efficiency, operational cost, and scalability. With appropriate redundancy, standardized interfaces, and optimized distribution system designs, these architectures will provide a practical and robust path forward for the next generation of quantum computing infrastructure.

Hansen, B. [Fermilab]↗

Review of electric discharge microplasmas generated in highly fluctuating fluids: Characteristics and application to nanomaterials synthesis

Plasma-based fabrication of novel nanomaterials and nanostructures is indispensible for the development of next-generation electronic devices and for green energy applications. In particular, controlling the interactions between plasmas and materials interfaces, and the plasma fluctuations, is crucial for further development of plasma-based processes and bottom-up growth of nanomaterials. Electric discharge microplasmas generated in supercritical fluids represent a special class of high-pressure plasmas, where fluctuations on the molecular scale influence the discharge properties and the possible bottom-up growth of nanomaterials. This review discusses an anomaly observed for direct current microplasmas generated near the critical point, a local decrease in the breakdown voltage. This anomalous behavior is suggested to be caused by the concomitant decrease of the ionization potential due to the formation of clusters near the critical point, and the formation of extended electron mean free paths caused by the high-density fluctuation near the critical point. It is also shown that in the case of dielectric barrier microdischarges generated close to the critical point, the high-density fluctuation of the supercritical fluid persists. The final part of the review discusses the application of discharges generated in supercritical fluids to synthesis of nanomaterials, in particular, molecular diamond—so-called diamondoids—by microplasmas generated inside conventional batch-type and continuous flow microreactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of gas jetting and fumarole acoustics at Aso Volcano, Japan

The gas-thrust region of a large volcanic eruption column is predominately a momentum-driven, fluid flow process that perturbs the atmosphere and produces sound akin to noise from jet and rocket engines, termed “jet noise”. In this paper, we aim to enhance understanding of large-scale volcanic jets by studying an accessible, less hazardous fumarolic jet. We characterize the acoustic signature of ~ 2.5-meter wide vigorously jetting fumarole at Aso Volcano, Japan using a 5-element infrasound array located on the nearby crater. The fumarole opened on 13 July 2015 on the southwest flank of the partially collapsed pyroclastic cone within Aso Volcano's Naka-dake crater and had persistent gas jetting, which produced significant audible jet noise. The array was ~ 220 m from the fumarole and 57.6° from the vertical jet axis, a recording angle not typically feasible in volcanic environments. Array processing is performed to distinguish fumarolic jet noise from wind. Highly correlated periods are characterized by sustained, low-amplitude signal with a 7–10 Hz spectral peak. Finite difference time domain method numerical modeling suggests the influence of topography near the vent and along the propagation path significantly affects the spectral content, complicating comparisons with laboratory jet noise. The fumarolic jet has a low estimated Mach number (0.3 to 0.4) and measured temperature of ~ 260 °C. The Strouhal number for infrasound from volcanic jet flows and geysers is not known; thus we assume a peak Strouhal number of 0.19 based on pure-air laboratory jet experiments. This assumption leads to an estimated exit velocity of the fumarole of ~ 79 to 132 m/s. Finally, using published gas composition data from 2003 to 2009, the fumarolic vent area estimated from thermal infrared images, and estimated jet velocity, we estimate total volatile flux at ~ 160–270 kg/s (14,000–23,000 t/d).

58 GEOSCIENCES↗

J/ ψ elliptic and triangular flow in Pb-Pb collisions at \( \sqrt{s_{\mathrm{NN}}} \) = 5 . 02 TeV

The inclusive J/ ψ elliptic ( v 2 ) and triangular ( v 3 ) flow coefficients measured at forward rapidity (2 . 5 < y < 4) and the v 2 measured at midrapidity (| y | < 0 . 9) in Pb-Pb collisions at \( \sqrt{s_{\mathrm{NN}}} \) = 5 . 02 TeV using the ALICE detector at the LHC are reported. The entire Pb-Pb data sample collected during Run 2 is employed, amounting to an integrated luminosity of 750 μ b – 1 at forward rapidity and 93 μ b – 1 at midrapidity. The results are obtained using the scalar product method and are reported as a function of transverse momentum p T and collision centrality. At midrapidity, the J/ ψ v 2 is in agreement with the forward rapidity measurement. The centrality averaged results indicate a positive J/ ψ v 3 with a significance of more than 5 σ at forward rapidity in the p T range 2 < p T < 5 GeV/ c . The forward rapidity v 2 , v 3 , and v 3 /v 2 results at low and intermediate p T ( p T ≲ 8 GeV/ c ) exhibit a mass hierarchy when compared to pions and D mesons, while converging into a species-independent curve at higher p T . At low and intermediate p T , the results could be interpreted in terms of a later thermalization of charm quarks compared to light quarks, while at high p T , path-length dependent effects seem to dominate. The J/ ψ v 2 measurements are further compared to a microscopic transport model calculation. Using a simplified extension of the quark scaling approach involving both light and charm quark flow components, it is shown that the D-meson v n measurements can be described based on those for charged pions and J/ ψ flow.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Trajectory-Based Interpretation of Laser Light Diffraction by a Sharp Edge

In the diffraction pattern produced by a half-plane sharp edge when it obstructs the passage of a laser beam, two characteristic regions are noticeable. There is a central region, where the diffraction of laser light appears in the region of geometric shadow, while intensity oscillations are observed in the non-obstructed area. On both sides of the edge, there are also very long light traces along the normal to the edge of the obstacle. The theoretical explanation of this phenomenon is based on the Fresnel–Kirchhoff diffraction theory applied to the Gaussian beam propagation behind the obstacle. In this paper, we supplement this explanation by considering electromagnetic flow lines, which provide a more complete interpretation of the phenomenon in terms of electric and magnetic fields and flux lines; at the same time, that can be related to average photon paths. © 2018, Springer Science+Business Media, LLC, part of Springer Nature.

43 PARTICLE ACCELERATORS↗

Transmissive microfluidic active cooling for concentrator photovoltaics

We present the design, fabrication, characterization, and field testing of transmissive active cooling for use in a point-focus spectrum-splitting hybrid concentrator photovoltaics/thermal (CPV/T) system. Seven parallel-path 100 μm thick microchannels are made using polydimethylsiloxane and attached to a CPV module containing a 6 × 6 array of 5.5 mm transmissive CPV cells on a sapphire substrate. Water is flowed through the microchannels to actively cool the CPV cells. The total transmittance of the CPV module reduces by 5.2% with the addition of the active cooling microchannels, relative to the module transmission with no microchannels. The peak cell temperature is measured as 69 °C with a thermal resistance of 9.35 K/W at 157 suns, well below the 110 °C maximum allowed temperature. A maximum flowrate of 16.7 g/s is achieved from a 13 psi pressure drop across the microchannels and manifold assembly. The flow characteristics within each microfluidic channel show maximum fluid velocity of 4.3 m/s (Re = 953) with a calculated convection coefficient of 1.7 × 10 4 W/m 2 K (Nu = 5.36). The CPV/T module and cooling system performance was validated during week-long outdoor tests under varying solar conditions up to 250 suns using a 2.7 m 2 parabolic dish collector mounted to a two-axis tracking system.

14 SOLAR ENERGY↗

Powerloads on the front end components and the duct of the heating and diagnostic neutral beam lines at ITER

The heating and current drive beam lines (HNB) at ITER are expected to deliver ∼16.7 MW power per beam line for H beams at 870 keV and D beams at 1 MeV during the H-He and the DD/DT phases of ITER operation respectively. On the other hand the diagnostic neutral beam (DNB) line shall deliver ∼2 MW power for H beams at 100 keV during both the phases. The path lengths over which the beams from the HNB and DNB beam lines need to be transported are 25.6 m and 20.7 m respectively. The transport of the beams over these path lengths results in beam losses, mainly by the direct interception of the beam with the beam line components and reionisation. The lost power is deposited on the surfaces of the various components of the beam line. In order to ensure the survival of these components over the operational life time of ITER, it is important to determine to the best possible extent the operational power loads and power densities on the various surfaces which are impacted by the beam in one way or the other during its transport. The main factors contributing to these are the divergence of the beamlets and the halo fraction in the beam, the beam aiming, the horizontal and vertical misalignment of the beam, and the gas profile along the beam path, which determines the re-ionisation loss, and the re-ionisation cross sections. The estimations have been made using a combination of the modified version of the Monte Carlo Gas Flow code (MCGF) and the BTR code. The MCGF is used to determine the gas profile in the beam line and takes into account the active gas feed into the ion source and neutraliser, the HNB-DNB cross over, the gas entering the beamline from the ITER machine, the additional gas atoms generated in the beam line due to impacting ions and the pumping speed of the cryopumps. The BTR code has been used to obtain the power loads and the power densities on the various surfaces of the front end components and the duct modules for different scenarios of ITER operation. The gas profile and the magnetic field distribution for each scenario has been considered in these evaluations. The worst case power loads and power densities for each surface have been used to study their thermo-mechanical behaviour and manufacturing feasibility. The details of these calculations and results obtained are presented and discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Yield reduction via the Knudsen layer effect in a mixture of fuel and pusher material

Hydrodynamic mix in inertial confinement fusion capsules produces chunk mix between deuterium-tritium fuel and inert pusher materials. The characteristic size of the intermingled fuel and pusher materials can be rapidly reduced by fluid mix, especially when the streamlines of the flow field are chaotic. This leads to an increasing Knudsen number for the fuel segments and a decreasing size of the pusher remnant with respect to the fuel ion mean-free-path. Finally, the former exacerbates Knudsen layer yield degradation due to fast ion losses, while the latter tends to alleviate Knudsen layer yield reduction due to other kinetic effects such as diffusive tunneling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Canonical solutions for unsteady flow fields

The initial value problem of one-dimensional gas-dynamics involving discontinuous, nonuniform initial data is discussed. Canonical solutions which are valid in a small x, t region aroung a discontinuity, and which include the first order effects of nonuniformities in the data, are derived explicitly. The theory is derived by considering a group of elementary piston problems. Solutions with a shock or with a centered expansion wave are worked out individually in order to relate initial flow properties and their gradients to the speed and acceleration of the discontinuity waves. They are then combined to represent the solution of a general initial value problem by regarding the piston path as a contact line. In addition, problems with chemical reaction are discussed in terms of elementary piston problems which involve strong detonation waves, Chapman-Jouguet detonation waves, and deflagration waves.

Liu, G. C.↗

Enclosed capillary device for low gravity management of He II

To transfer He II in space, a large tank must be drained at low gravity. This paper describes and analyzes an enclosed gallery device designed for collecting and delivering He II to a pump. The device allows most of the liquid to move about in the tank while it maintains a liquid flow to the pump. Only the liquid in the screen-covered gallery channels and in the upper and lower receivers is contained. The device operates by providing surface tension dominated liquid paths from all locations within the tank to the lower receiver, which houses the pump. Since the fluid pressure in the channels may be below the saturated vapor pressure, an analysis of He II cavitation is performed to determine if cavitation will occur. The effect of heat dissipation from the pump is examined to determine if it may result in nucleation of boiling. It is concluded that this enclosed device can meet the requirements for transfer of He II under the predicted adverse accelerations that will be encountered on-orbit.

Frank, D. J.↗

On the nonlinear stability of a high-speed, axisymmetric boundary layer

The stability of a high-speed, axisymmetric boundary layer is investigated using secondary instability theory and direct numerical simulation. Parametric studies based on the temporal secondary instability theory identify subharmonic secondary instability as a likely path to transition on a cylinder at Mach 4.5. The theoretical predictions are validated by direct numerical simulation at temporally-evolving primary and secondary disturbances in an axisymmetric boundary-layer flow. At small amplitudes of the secondary disturbance, predicted growth rates agree to several significant digits with values obtained from the spectrally-accurate solution of the compressible Navier-Stokes equations. Qualitative agreement persists to large amplitudes of the secondary disturbance. Moderate transverse curvature is shown to significantly affect the growth rate of axisymmetric second mode disturbances, the likely candidates of primary instability. The influence of curvature on secondary instability is largely indirect but most probably significant, through modulation of the primary disturbance amplitude. Subharmonic secondary instability is shown to be predominantly inviscid in nature, and to account for spikes in the Reynolds stress components at or near the critical layer.

Pruett, C. David↗