Search NASA⌕ Search

SEARCH · Search NASA

Results for “ION IMPLANTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Influence of measurement temperature on the luminescence properties of (113) defects in oxygen-implanted silicon

Influence of the measurement temperature in the range 5–130 K on the photoluminescence spectra of (113) defects in Si implanted with 350-keV oxygen ions at doses of 3.7 × 10{sup 14} cm{sup –2} and annealed at a temperature of 700°C for 1 h in a chlorine-containing atmosphere is studied. The temperature dependence of the line intensity is characterized by portions of intensity increase with an activation energy of 23.1 meV and intensity quenching with activation energies of 41.9 and 178.3 meV. With increasing temperature, the lines are shifted to longer wavelengths and their FWHM increases.

36 MATERIALS SCIENCE↗

Measurements of reflectance spectra of ion-bombarded ice and application to surfaces in the outer solar system

The first results of laboratory measurements of the wavelength dependence of the alternation of the visible reflectance of H2O ice irradiated by keV ions are presented. When the implanted species is chemically neutral, absorption is slightly enhanced below 0.55 micron. For an incident species containing sulfur, a strong absorption feature is produced at 0.4 micron, probably corresponding to S3. This occurs at too large a wavelength to account for the absorption feature observed at Europa by Voyager and therefore casts doubt on the recent interpretation of the reflectance data of Europa.

O'Shaughnessy, D. J.↗

Transmission Electron Microscopy Investigation of Krypton Bubbles in Polycrystalline CeO2

To gain an understanding of gas bubble transport in oxide nuclear fuel, this paper uses polycrystalline CeO2, composed of both nanograins and micrograins, as a surrogate material for UO2. The CeO2 was implanted with 150-keV Kr ions up to a dose of 1 x 1016 ions/cm2 at 600 degrees C. Transmission electron microscopy characterizations of small Kr bubbles in nanograin and micrograin regions were compared. The grain boundary acted as an efficient defect sink, as evidenced by smaller bubbles and a lower bubble density in the nanograin region as compared to the micrograin region.

99 GENERAL AND MISCELLANEOUS↗

Transmission Electron Microscopy Investigation of Krypton Bubbles in Polycrystalline CeO2

To gain an understanding of gas bubble transport in oxide nuclear fuel, this paper uses polycrystalline CeO 2 , composed of both nanograins and micrograins, as a surrogate material for UO 2 . The CeO 2 was implanted with 150-keV Kr ions up to a dose of 1 × 10 16 ions/cm 2 at 600°C. Transmission electron microscopy characterizations of small Kr bubbles in nanograin and micrograin regions were compared. The grain boundary acted as an efficient defect sink, as evidenced by smaller bubbles and a lower bubble density in the nanograin region as compared to the micrograin region.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Surface plasmon polariton assisted optical switching in noble bimetallic nanoparticle system

Photoresponse of bimetallic Au-Ag nanoparticle embedded soda glass (Au-Ag@SG) substrate is reported for surface plasmon assisted optical switching using 808 nm excitation. Au-Ag@SG system is made by an ion beam technique where Ag{sup +} is introduced first in the soda glass matrix by ion exchange technique. Subsequently, 400 keV Au{sup +} is implanted in the sample for different fluences, which is followed by an ion beam annealing process using 1 MeV Si{sup +} at a fixed fluence of 2 × 10{sup 16} ions·cm{sup −2}. Characteristic surface plasmon resonance (SPR) peaks around 400 and 550 nm provided evidence for the presence of Au and Ag nanoparticles. An optical switching in the Au-Ag@SG system with 808 nm, which is away from the characteristic SPR peaks of Ag and Au nanoparticles, suggests the possible role of two photon absorption (TPA) owing to the presence of interacting electric dipole in these systems. The role of surface plasmon polariton is emphasized for the propagation of electronic carrier belonging to the conduction electron of Au-Ag system in understanding the observed photoresponse. Unique excitation dependent photoresponse measurements confirm the possible role of TPA process. A competitive interband and intraband transitions in the bimetallic system of Au and Ag, which may be primarily responsible for the observation, are validated qualitatively using finite difference time domain calculations where inter-particle separation of Au and Ag plays an important role. Thus, a smart way of optical switching can be envisaged in noble bimetallic nanocluster system where long wavelength with higher skin depth can be used for communication purpose.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure of nitinol surfaces oxidized by low-energy ion bombardment

We have studied the electronic structure of nitinol exposed to low-energy oxygen-ion bombardment, using x-ray photoemission spectroscopy (XPS) and near-edge x-ray absorption fine structure (NEXAFS) spectroscopy. XPS spectra reveal a gradual transformation of nitinol surfaces into TiO{sub 2} with increased dose of implanted oxygen. No oxidation of Ni atoms has been detected. NEXAFS spectra around O K-edge and Ti L{sub 2,3}-edge, reflecting the element-specific partial density of empty electronic states, exhibit features, which can be attributed to the creation of molecular orbitals, crystal field splitting, and the absence of long-range order, characteristic of the amorphous TiO{sub 2}. Based on these results, we discuss the oxidation kinetics of nitinol under low-energy oxygen-ion bombardment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photoluminescence and positron annihilation spectroscopy of MeV Si{sup +} ion-irradiated Si{sub y}O{sub 1-y}:Er (y{approx_equal}1/3) thin films

Amorphous erbium-doped silicon oxide (Si{sub y}O{sub 1-y}:Er, y{>=}1/3) thin films are currently under investigation as a luminescent material system for complementary metal-oxide semiconductor compatible light emitters. We have grown films with y{approx_equal}1/3 and investigated their properties using both positron annihilation and photoluminescence (PL) spectroscopies. Films were characterized ''as deposited,'' following irradiation with 1 MeV Si{sup +} ions and after isochronal annealing. The PL yield from both Er{sup 3+} ions and sensitizing defects is reduced by irradiation, depending strongly on the irradiation fluence and reaching saturation at {approx}4x10{sup 13} Si{sup +}/cm{sup 2}. Higher implantation fluences result in an open-volume defect structure in the film that persists after annealing. This annealing behavior is similar to that of an unrecoverable quenching effect on Er{sup 3+}-related PL near 1540 nm, and we suggest that these open-volume defects may cause a decoupling of the Er{sup 3+} ions from sensitizing oxide point defects that form as a result of the film deposition process.

36 MATERIALS SCIENCE↗

Temperature-dependent growth and transient state of hydrogen-induced nanocavities in silicon

Silicon samples H-implanted to a dose of 3x10{sup 16} cm{sup -2} were analyzed by positron annihilation and ion backscattering techniques to investigate the growth of H-induced nanocavities at different annealing temperatures (400-900 deg. C). Positron annihilation lifetime spectroscopy revealed a constant increase in the vacancy cluster size (i.e., nanocavity size) as the annealing temperature increased. On the other hand, Doppler broadening and ion channeling measurements suggested strong interaction between the implanted H and the defects depending on the annealing temperature. Furthermore, Au-gettering experiments revealed that transient gettering sites are formed at 600 deg. C between the H projected range and the surface. These results indicated that H desorption is one of the key factors in the optimization of the gettering process with H-induced nanocavities.

36 MATERIALS SCIENCE↗

Importance of ion bombardment during coverage of Au nanoparticles on their structural features and optical response

This work studies the changes in the optical response and morphological features of 6 ± 1 nm diameter Au nanoparticles (NPs) when covered by a layer of a-Al{sub 2}O{sub 3} by pulsed laser deposition (PLD). The laser fluence used for ablating the Al{sub 2}O{sub 3} target is varied in order to modify the kinetic energy (KE) of the species bombarding the NPs during their coverage. When the ion KE < 200 eV, the structural features and optical properties of the NPs are close to those of uncovered ones. Otherwise, a shift to the blue and a strong damping of the surface plasmon resonance is observed as fluence is increased. There are two processes responsible for these changes, both related to aluminum ions arriving to the substrate during the coverage process, i.e., sputtering of the metal and implantation of aluminum species in the metal. Both processes have been simulated using standard models for ion bombardment, the calculated effective implanted depths allow explaining the observed changes in the optical response, and the use of a size-dependent sputtering coefficient for the Au NPs predicts the experimental sputtering fractions. In spite of the work is based on PLD, the concepts investigated and conclusions can straightforwardly be extrapolated to other physical vapor deposition techniques or processes involving ion bombardment of metal NPs by ions having KE > 200 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Possible mitigation of tokamak plasma–surface interactions using thermionic divertor plates with inverse sheaths

Recent studies demonstrate that when a plasma-facing surface emits a sufficient flux of electrons, it will form an inverse sheath. In this work, we consider a possibility of using thermionic target plates with inverse sheaths as an innovative divertor operating scenario. We derive an electron heat flux boundary condition for inverse sheaths and show that for given power exhaust into a tokamak scrape-off-layer, an inverse sheath leads to a much lower target plasma electron temperature than a conventional sheath. Low enough target plasma temperatures for radiative divertor detachment could therefore be achieved using inverse sheaths instead of the usual need to inject neutral atoms that compromise the core plasma. Other advantages of inverse sheath detachment over conventional sheath operating scenarios include (a) ion impact energies are as low as possible, minimizing sputtering and tritium implantation, (b) surface recombination heat flux is reduced due to ion flux reduction, and (c) arcs are inhibited due to the sign of the surface electric field. This paper outlines the basic properties of inverse sheath detachment and considers the feasibility of implementation. We offer recommendations for future modeling efforts needed to better understand the effects of thermionic emission in tokamaks and whether inverse sheaths present a viable divertor solution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Oxide Heterogrowth on Ion-exfoliated Thin-film Complex Oxide Substrates

Fabrication of a bilayer HfO{sub 2}/single-crystal LiNbO{sub 3} film is demonstrated using deep high-energy He{sup +} implantation in a LiNbO{sub 3} wafer, followed by HfO{sub 2} atomic layer deposition, and, then, selective etching exfoliation from the bulk LiNbO{sub 3} crystal. The properties and morphology of these exfoliated bilayer films are characterized using a set of thin-film probes. Pre-exfoliation film patterning and one model application, in surface-refractive-index tuning of guided waves in a free-standing LiNbO{sub 3} film, are also demonstrated.

36 MATERIALS SCIENCE↗

Revealing nano-scale lattice distortions in implanted material with 3D Bragg ptychography

Small ion-irradiation-induced defects can dramatically alter material properties and speed up degradation. Unfortunately, most of the defects irradiation creates are below the visibility limit of state-of-the-art microscopy. As such, our understanding of their impact is largely based on simulations with major unknowns. Here we present an x-ray crystalline microscopy approach, able to image with high sensitivity, nano-scale 3D resolution and extended field of view, the lattice strains and tilts in crystalline materials. Using this enhanced Bragg ptychography tool, we study the damage helium-ion-irradiation produces in tungsten, revealing a series of crystalline details in the 3D sample. Our results lead to the conclusions that few-atom-large ‘invisible’ defects are likely isotropic in orientation and homogeneously distributed. A partially defect-denuded region is observed close to a grain boundary. These findings open up exciting perspectives for the modelling of irradiation damage and the detailed analysis of crystalline properties in complex materials.

42 ENGINEERING↗

Lanthanum-silicon-substituted hydroxyapatite: Mechanochemical synthesis and prospects for medical applications

The paper presents the results of mechanochemical synthesis of hydroxyapatite (HAP) with simultaneous substitutions of lanthanum (La{sup 3+}) for calcium ions and silicate ((SiO{sub 4}){sup 4−}-group) for the phosphate group with the substituent concentrations in the range 0.2–2.0 mol per HAP mol. The use of Si-substituted HAP as a coating material promotes accelerated osteosynthesis and osteointegration of implants into the bone tissue. The replacement of calcium ions by La{sup 3+} in the HAP structure plays an antimicrobial role preventing inflammatory processes. Annealing-induced variations in the lattice parameters of synthesized samples indicate the substituent incorporation into the HAP structure. It is known that complex compounds with lanthanides are used for cancer chemotherapy. In particular, La plays a key role in the course of treatment of injured defects of bone tissue. In addition, La-substituted HAP can be used for filling bone defects and coating implants in postoperational areas affected by bone cancer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructural characterization of laser micro-welded Nitinol wires

Highlights: • FIB technique was used in the preparation of TEM foils of laser micro-welded joint. • Phase content in various zones of laser micro-welded Nitinol wires was revealed. • Welding induces the R-phase formation in HAZ and intermetallics precipitation in FZ. - Abstract: Laser micro-welding has been considered one of the most promising joining methods of manufacturing Nitinol biomedical devices. However, there is still a lack of understanding about how laser micro-welding influences the microstructure. This work attempts to reveal the phase content within various microstructural zones of laser micro-welded crossed Nitinol wires by transmission electron microscopy (TEM) with the assistance of the focused ion beam (FIB) technique. The base metal is composed of a single austenite phase (B2). The fusion zone exhibits the coexistence of austenite matrix and several intermetallics (T{sub 2}Ni, TiNi{sub 3} and Ti{sub 3}Ni{sub 4}). The precipitation of R-phase was observed in HAZ with B2 matrix due to thermally induced stresses during welding.

36 MATERIALS SCIENCE↗

Channeling in direct dark matter detection II: channeling fraction in Si and Ge crystals

The channeling of the ion recoiling after a collision with a WIMP changes the ionization signal in direct detection experiments, producing a larger signal than otherwise expected. We give estimates of the fraction of channeled recoiling ions in Si and Ge crystals using analytic models produced since the 1960's and 70's to describe channeling and blocking effects. We used data obtained to avoid channeling in the implantation of dopants in Si crystals to test our models.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Lunar Magnetic Fields: Implications for Resource Utilization

It is well known that solar-wind-implanted hydrogen and helium-3 in lunar soils are potentially usable resources for future manned activities. For economical mining of these implanted gases, it is desirable that relative concentrations exceed that of typical soils. It has previously been noted that the monthly variation of solar wind flux on the surface due to lunar immersion in the geomagnetic tail may have measurable consequences for resource utilization. It is pointed out that, for a constant external flux, locally strong lunar crustal magnetic fields will exert the dominant influence on solar wind volatile implantation rates. In particular, the strongest lunar crustal magnetic fields will both deflect and focus incident ions in local regions leading to local enhancements of the incident ion flux. Thus, the most economical sites for extraction of solar-wind-implanted volatiles may be within or adjacent to strong crustal magnetic fields. In addition, solar wind ion deflection by crustal magnetic fields must be considered in evaluating the issue of whether remnant cometary ice or water-bearing minerals have survived in permanently shadowed regions near the lunar poles. This is because sputter erosion of water ice by solar wind ions has been suggested to be an important ice loss mechanism within permanently shadowed regions. Thus, permanently shadowed regions that are also shielded from the solar wind by locally strong crustal fields could be the most promising locations for the survival of cometary ice. Additional numerical simulations are employed to show that solar wind ion deflection by strong lunar magnetic anomalies can produce local increases in the implantation rate of solar wind gases such as hydrogen.

Hood, L. L.↗

A quantitative study of retention and release of deuterium and tritium during irradiation of y-LiAlO2 pellets

This study reports on the quantification of deuterium in ion-irradiated gamma-LiAlO2 pellets as a function of dose and temperature. The gamma-LiAlO2 pellets were sequentially irradiated with He+ and D2+ ions to the same fluences of 5E16, 1E17 and 2E17 He++D+/cm2 at 188 K. Additional irradiation was performed to 1E17, 2E17 and 4E17 He++D+/cm2 at 573 K. A set of the pellets irradiated at 188 K was shipped and stored at low temperatures from 80 to 132 K and characterized using time-of-flight secondary ion mass spectrometry at ~173 K. The deuterium depth profiles show a Gaussian-like distribution in the low-temperature pellets. The total deuterium retention is found to be directly proportional to the ion fluence. About 27 at.% of the implanted deuterium atoms were released from the pellet irradiated to 2E17 He++D+/cm2 at 188 K during storage at room temperature for ~1 month. Retention of the trapped or bound deuterium during ion irradiation at 573 K increases initially with ion fluence and tends to saturate at a high fluence. The amount of the released deuterium is observed to be quantitatively consistent with that of the released tritium from similar standard pellets during neutron irradiation at 573 K.

Deuterium retention and release, ion irradiation, ↗