Search NASA⌕ Search

SEARCH · Search NASA

Results for “Methods in superconductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Breaking Rayleigh’s Law with Spatially Correlated Disorder to Control Phonon Transport

Controlling thermal transport in insulators and semiconductors is crucial for many technological fields such as thermoelectrics and thermal insulation, for which a low thermal conductivity (κ) is desirable. A major obstacle for realizing low κ materials is Rayleigh’s law, which implies that acoustic phonons, which carry most of the heat, are insensitive to scattering by point defects at low energy. We demonstrate, with large scale simulations on tens of millions of atoms, that isotropic long-range spatial correlations in the defect distribution can dramatically reduce phonon lifetimes of important low-frequency heat-carrying modes, leading to a large reduction of κ—potentially an order of magnitude at room temperature. We propose a general and quantitative framework for controlling thermal transport in complex functional materials through structural spatial correlations, and we establish the optimal functional form of spatial correlations that minimize κ. Finally, we end by briefly discussing experimental realizations of various correlated structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calculation of the Physicochemical Characteristics of a New Orthorhombic Form of Diamond

A geometrically optimized structure and some properties of a new diamond polymorph have been assessed using density-functional theory calculations in the local-density approximation. The new phase has a primitive orthorhombic lattice (Pmma). The calculation results indicate that the density, sublimation energy, bulk modulus, Vickers hardness, and band gap of this phase are lower than those of cubic diamond by 5–18%. The orthorhombic diamond polymorph can be obtained by compressing graphite in the [001] direction at a pressure of 59.4 GPa. For this phase transition, we calculated theoretical X-ray diffraction patterns of the new phase and intermediate states, which can be used for their identification in experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, crystal structure, HF and DFT calculations of 1-(2-chlorobenzyl)-N-(1-(2-chlorobenzyl)-4,5-dihydro-1H-imidazol-2-yl) -1H-benzimidazol-2-amine

The titled compound (1), has been synthesized and characterized by IR and {sup 1}H-NMR spectroscopy, and single crystal X-ray diffraction. The compound crystallizes in the triclinic space group P-1. The crystal structure is stabilized by C-H-{pi} and aromatic {pi}-{pi} interactions. There are also intramolecular N-H-N and C-H-N hydrogen bonds in the molecule. The use of quantum chemical calculations to characterise and optimise the choice of material is illustrated by ab initio treatments. Vibrational frequencies and LUMO-HOMO energy difference of 1 have also been investigated by Density functional theory (DFT) and Hartree-Fock (HF) calculations. Calculated frequencies are in good agreement with the corresponding experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetoplasma oscillations in a 2D electron system with spin-orbit interaction

The magnetoplasmon spectrum in a 2D electron plasma is investigated theoretically taking into account the spin-orbit interaction in the Rashba model. The expression is derived for the polarization operator in the semiclassical range of magnetic fields (in which the Fermi energy eF is much larger than the Landau quantum). Approximate analytic formulas are obtained for spin-plasmon branches. The dependences of plasma wave frequencies on the wavevector and magnetic field are calculated from a numerical solution of the dispersion equation. In addition, the magnetic field and frequency dependences of the plasmon absorption intensity are constructed. The absorption intensity at the peak is found to be sensitive to the spin-orbit interaction constant.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stepwise computational synthesis of fullerene C{sub 60} derivatives. Fluorinated fullerenes C{sub 60}F{sub 2k}

Reactions of fullerene C{sub 60} with atomic fluorine are studied by the unrestricted broken spin symmetry Hartree-Fock (UBS HF) approach implemented in semiempirical codes based on the AMI technique. The calculations are focused on a successive addition of a fluorine atom to the fullerene cage following the indication of the highest chemical susceptibility of the cage atom, which is calculated at each step. The proposed computational synthesis is based on the effectively unpaired-electron concept of the chemical susceptibility of fullerene atoms. The obtained results are analyzed from the standpoints of energy, symmetry, and the composition abundance. A good fitting of the data to experimental findings proves a creative role of the suggested synthetic methodology.

74 ATOMIC AND MOLECULAR PHYSICS↗

Coherent X-ray radiation generated by a relativistic electron in an artificial periodic structure

A theory of coherent X-ray radiation from a relativistic electron crossing an artificial periodic layered structure in the Laue scattering geometry is constructed. The expressions describing the spectral-angular radiation parameters are obtained. It is shown that the radiation yield in such a medium may substantially exceed the radiation yield in a crystal under analogous conditions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The virial theorem and the ground state problem in polaron theory

The virial theorem for the translation-invariant theory of a polaron [3] is discussed. It is shown that, in [3], Tulub made a nonoptimal choice of variational parameters in the strong-coupling limit, which led to the violation of the virial relations. The introduction of an additional variational parameter to the test function reduces the polaron energy and makes it possible to satisfy the relations of the virial theorem for a strong-coupling polaron (the Pekar 1: 2: 3: 4 theorem).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Band and Impurity States in Dimond with the (MV){sup –} (M = Si, Ge, Sn) Centers Based on ab Initio Calculations

Ab initio calculations were used to determine the structure, electronic zone dispersion, partial (atomic and orbital) densities of states, and levels of impurity–vacancy cluster (MV){sup –} (M = Si, Ge, Sn) in diamond. Wavefunctions were determined in the density functional theory approximation using hybrid exchange-correlation functional, localized basis set of Gaussians, and a supercell consisting of 192 atoms. Results are compared with data on undoped diamond and with experimental results. The dependence of the direct and indirect energy gap on the cluster type is discussed. Calculations are carried out taking into account the spin–orbit interaction to identify impurity levels in the valence band. The effect of electron–electron interaction on the position of impurity levels is discussed. The dominant contribution of the d orbitals to the density of states at the impurity level in all clusters is detected.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and Dynamic and Nonlinear Optical Properties of Hg{sub 2}F{sub 2} Crystals

The structure of the Hg{sub 2}F{sub 2} compound was studied experimentally and theoretically within the density functional theory. X-ray diffraction studies enabled us to determine the space group of the crystal (I4/mmm), and the comparison of the experimentally obtained Raman spectra of these crystals with the theoretical ones enabled us to find and uniquely identify all bands in the spectra. The stability of the I4/mmm phase was analyzed in a wide range of uniaxial and hydrostatic pressures. It is shown that the uniaxial compression of a crystal along a tetrad axis results in a phase transition to the Cmcm structure at P{sub c} = 8 GPa, whereas the hydrostatic compression results in a previously unknown phase transition to the Cmca phase at P{sub c} = 9 GPa. The calculations of the cubic nonlinear susceptibility of Hg{sub 2}F{sub 2} predict a giant value of this quantity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Band Gap Modulation by Two-Dimensional h-BN Nanostructure

Two-dimensional hexagonal boron nitride (h-BN) as a graphene-like material was investigated due to its impending applications in electronics. The h-BN band gap E{sub g} as an important factor and its variation between bilayer ZrSe{sub 2} sheets were explored under an external electric field. The initially indirect band gap is found to convert to direct band gap by means of density functional theory. Additionally, the band gap is modulated by van der Waals corrections from 0.21220 to 0.01770 eV. Based on the results, the proposed heterostructure is converted to the direct band gap, and band gap smoothly decreased from 0.25440 to 0.0436 eV following the application of external electric field from 0.2 to 0.6 eV. Moreover, ZrSe{sub 2}|h-BN|ZrSe{sub 2} is investigated under the applied biaxial compressive strain from 1 to 4%. The findings demonstrated that the gap was decreased by any compressive strain amplification, while the semiconducting behavior in the heterostructure attained to the semi-metallic performance under the increasing strain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Generation of degenerate, factorizable, pulsed squeezed light at telecom wavelengths

We characterize a periodically poled KTP crystal that produces an entangled, two-mode, squeezed state with orthogonal polarizations, nearly identical, factorizable frequency modes, and few photons in unwanted frequency modes. We focus the pump beam to create a nearly circular joint spectral probability distribution between the two modes. After disentangling the two modes, we observe Hong-Ou-Mandel interference with a raw (background corrected) visibility of 86% (95%) when an 8.6 nm bandwidth spectral filter is applied. We measure second order photon correlations of the entangled and disentangled squeezed states with both superconducting nanowire single-photon detectors and photon-number-resolving transition-edge sensors. Both methods agree and verify that the detected modes contain the desired photon number distributions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Average Atom models

This report discusses average atom models, relatively cheap EOS models based on DFT that can access any temperature or density point for any element.

74 ATOMIC AND MOLECULAR PHYSICS↗

A technique to measure the thermal diffusivity of high T(sub c) superconductors

High T(sub c) superconducting electrical current leads and ground straps will be used in cryogenic coolers in future NASA Goddard Space Flight Center missions. These superconducting samples will be long, thin leads with a typical diameter of two millimeters. A longitudinal method is being developed to measure the thermal diffusivity of candidate materials for this application. This technique will use a peltier junction to supply an oscillatory heat wave into one end of a sample and will use low mass thermocouples to follow the heat wave along the sample. The thermal diffusivity will be calculated using both the exponential decay of the heat wave and the phase shift of the wave. Measurements will be done in a cryostat between 10 K and room temperature.

Powers, Charles E.↗

Method for forming single phase, single crystalline 2122 BCSCO superconductor thin films by liquid phase epitaxy

A substantially single phase, single crystalline, highly epitaxial film of Bi.sub.2 CaSr.sub.2 Cu.sub.2 O.sub.8 superconductor which has a T.sub.c (zero resistance) of 83 K is provided on a lattice-matched substrate with no intergrowth. This film is produced by a Liquid Phase Epitaxy method which includes the steps of forming a dilute supercooled molten solution of a single phase superconducting mixture of oxides of Bi, Ca, Sr, and Cu having an atomic ratio of about 2:1:2:2 in a nonreactive flux such as KCl, introducing the substrate, e.g., NdGaO.sub.3, into the molten solution at 850.degree. C., cooling the solution from 850.degree. C. to 830.degree. C. to grow the film and rapidly cooling the substrate to room temperature to maintain the desired single phase, single crystalline film structure.

Pandey, Raghvendra K.↗

Epitaxial layers of 2122 BCSCO superconductor thin films having single crystalline structure

A substantially single phase, single crystalline, highly epitaxial film of Bi.sub.2 CaSr.sub.2 Cu.sub.2 O.sub.8 superconductor which has a T.sub.c (zero resistance) of 83K is provided on a lattice-matched substrate with no intergrowth. This film is produced by a Liquid Phase Epitaxy method which includes the steps of forming a dilute supercooled molten solution of a single phase superconducting mixture of oxides of Bi, Ca, Sr, and Cu having an atomic ratio of about 2:1:2:2 in a nonreactive flux such as KCl, introducing the substrate, e.g., NdGaO.sub.3, into the molten solution at 850.degree. C., cooling the solution from 850.degree. C. to 830.degree. C. to grow the film and rapidly cooling the substrate to room temperature to maintain the desired single phase, single crystalline film structure.

Pandey, Raghvendra K.↗

Multi-mode Analysis of Surface Losses in a Superconducting Microwave Resonator in High Magnetic Fields

This paper reports on a surface impedance measurement of a niobium titanium superconducting radio frequency (SRF) cavity in a magnetic field (up to $10\,{\rm T}$). A novel method is employed to decompose the surface resistance contributions of the cylindrical cavity end caps and walls using measurements from multiple $TM$ cavity modes. The results confirm that quality factor degradation of a NbTi SRF cavity in a high magnetic field is primarily from surfaces perpendicular to the field (the cavity end caps), while parallel surface resistances (the walls) remain relatively constant. This result is encouraging for applications needing high Q cavities in strong magnetic fields, such as the Axion Dark Matter eXperiment (ADMX), because it opens the possibility of hybrid SRF cavity construction to replace conventional copper cavities.

43 PARTICLE ACCELERATORS↗

Electronic, Transport, and Magnetic Properties of La-Doped Ba{sub 1−x}Fe{sub 1.9}Pt{sub 0.1}As{sub 2} (x = 0, 0.4, 0.6, 0.8) Compounds

We briefly reported the structural variation and the nature of superconductivity properties correlating with magnetic and resistivity data of La-doped Ba{sub 1−x}Fe{sub 1.9}Pt{sub 0.1}As{sub 2} compounds. A solid-state reaction method was chosen to prepare bulk-type materials. The peak definition was studied to clarify the crystal structure of the samples, and it was observed that all samples were in ThCr{sub 2}Si{sub 2}-type structures, which is in harmony with similar compositions in the literature. Critical temperatures emphasizing superconductivity states have been clarified using magnetization measurements in the temperature range 5–170 K under magnetic field at 20 Oe, and the obtained results matched with resistivity measurements’ results for consistency of critical temperatures. We obtained a limit doping number for the Ba{sub 1−x}La{sub x}Fe{sub 1.9}Pt{sub 0.1}As{sub 2} samples synthesized by the solid-state reaction method. Increasing La and decreasing Ba amounts in the Ba{sub 1−x}La{sub x}Fe{sub 1.9}Pt{sub 0.1}As{sub 2} samples showed a fluctuation in T{sub c} values with inducing superconductivity. x = 0.6 was determined to have the highest T{sub c} value for the Ba{sub 0.4}La{sub 0.6}Fe{sub 1.9}Pt{sub 0.1}As{sub 2}sample, and a further increment in the amount of La revealed a deterioration in superconductivity. Replacing La with Ba should be the reason for lattice shrinkage, and slightly, the geometric factor was affected by replacing lower radius La with bigger radius Ba in the Ba{sub 0.4}La{sub 0.6}Fe{sub 1.9}Pt{sub 0.1}As{sub 2} compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanical behavior simulation of MEMS-based cantilever beam using COMSOL multiphysics

This paper presents the studies of mechanical behavior of MEMS cantilever beam made of poly-silicon material, using the coupling of three application modes (plane strain, electrostatics and the moving mesh) of COMSOL Multi-physics software. The cantilevers playing a key role in Micro Electro-Mechanical Systems (MEMS) devices (switches, resonators, etc) working under potential shock. This is why they require actuation under predetermined conditions, such as electrostatic force or inertial force. In this paper, we present mechanical behavior of a cantilever actuated by an electrostatic force. In addition to the simplification of calculations, the weight of the cantilever was not taken into account. Different parameters like beam displacement, electrostatics force and stress over the beam have been calculated by finite element method after having defining the geometry, the material of the cantilever model (fixed at one of ends but is free to move otherwise) and his operational space.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗