Search NASA⌕ Search

SEARCH · Search NASA

Results for “Open Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Beamline SRX (05-ID, IVU 21): 25 mA Commissioning Radiation Survey Report

A comprehensive radiological survey of the Beamline SRX (05-ID, In-Vacuum Undulator) was conducted on March 20, 2015 in accordance with the Beamline SRX (05-ID) Radiation Survey Plan [1]. The purpose of the survey is to verify the shielding integrity of the 3, 05-ID beamline enclosures (05-ID-A, 05-ID-B and 05-ID-D) and the transport pipe in between 05-ID-A, 05-ID-B and 05-ID-D. Enclosure 05-ID-C currently has only a transport pipe connecting 05-ID-B and 05-ID-D, but will serve as the experimental end station as future branch line for the second IVU. During the surveys the stored beam current varied between 21.04 and 24.87 mA, the 05ID straight section vacuum was around 0.43 ntorr, andfront-end slits opened near their hard stop limits.

36 MATERIALS SCIENCE↗

Beamline CSX (23-ID, EPU 49): 25 mA Commissioning Radiation Survey Report

A comprehensive radiological survey of the Beamline CSX (23-ID-1) was conducted on March 27, 2015 in accordance with the Beamline CSX (23-ID, EPU 49) Radiation Survey Plan [1]. The purpose of the survey is to verify the shielding integrity of the 23-ID beamline First Optics Enclosure (FOE) and downstream beam pipe. At the time of this comprehensive survey, 23-ID-2 beamline was still undergoing technical commissioning and therefore Section II “23 ID-2 FOE, exclusion zone and downstream pipe” could not be completed. During the surveys the stored beam current varied between 21.43 mA and 23.51 mA, the 23-ID straight section vacuum was around 0.44 ntorr, and front-end slits were open near their hard stop limits.

36 MATERIALS SCIENCE↗

Beamline HXN (03-ID, IVU 20): 25 mA Commissioning Radiation Survey Report

A comprehensive radiological survey of the Beamline HXN (03-ID, In-Vacuum Undulator) was conducted on February 27 and March 9, 2015 in accordance with the Beamline HXN (03-ID) Radiation Survey Plan [1]. The purpose of the survey is to verify the shielding integrity of the three, 03-ID beamline enclosures (03-ID-A, 03-ID-B, and 03-ID-C) and transport pipes between 03-ID-A and 03-ID-B, and between 03-ID-B and 03-ID-C. During the surveys the stored beam current varied between 20.75 and 23.15 mA,the ID-03 straight section vacuum was approximately 0.76 ntorr, and front-end slits were open near their hard stop limits.

36 MATERIALS SCIENCE↗

Quantum Computing for Theoretical Nuclear Physics, A White Paper prepared for the U.S. Department of Energy, Office of Science, Office of Nuclear Physics

Tremendous excitement exists among quantum computing enthusiasts as we witness the rapid evolution of quantum computing devices toward early practical implementation. Importantly, algorithm developments suggest that qubit devices have the potential to solve quantum many-body and quantum field theory problems of relevance to various research directions within the Department of Energy Office of Science and National Science Foundation. While exascale platforms represent the current horizon of excellence in computing, quantum computing provides the technology that lies beyond this horizon and opens the door to new vistas of theoretical endeavor. During a recent workshop at the Institute for Nuclear Theory, a group of 39 scientists from academia, government, national laboratories, and industry gathered to discuss the future of quantum computing for nuclear physics. Researchers described the basic scientific challenges in quantum chromodynamics and quantum many-body problems that could be addressed utilizing the power of quantum computing in the future. The group also discussed mechanisms for developing quantum-computing algorithms specifically for nuclear physics applications. This White Paper provides a synopsis of the workshop discussions, and suggests possible activities that might be supported as part of a vibrant pilot program of nuclear physics research in this area.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Creating Novel Gas Separation Constructs by Manipulating Free-Volume Distributions in Polymer-Grafted Nanoparticles

Polymer membranes are critical to many sustainability applications that require gas separation primarily based on differences in the sizes of the constituent molecules (“sieving”). The important figures of merit in this context are the rate at which the gas permeates through the membrane (or flux) and the resulting gas purity (as characterized by its selectivity). The overall goal is to maximize both gas permeability and selectivity. Currently, the ability to a priori design polymeric materials (either pure polymers or mixed matrix membranes where polymers are mixed with inorganic nanoparticles) with required permeability and selectivity remains an open challenge.

03 NATURAL GAS↗

Multiomics Data Collection, Visualization, and Utilization for Guiding Metabolic Engineering

Biology has changed radically in the past two decades, growing from a purely descriptive science into also a design science. The availability of tools that enable the precise modification of cells, as well as the ability to collect large amounts of multimodal data, open the possibility of sophisticated bioengineering to produce fuels, specialty and commodity chemicals, materials, and other renewable bioproducts. However, despite new tools and exponentially increasing data volumes, synthetic biology cannot yet fulfill its true potential due to our inability to predict the behavior of biological systems. Here, we showcase a set of computational tools that, combined, provide the ability to store, visualize, and leverage multiomics data to predict the outcome of bioengineering efforts. We show how to upload, visualize, and output multiomics data, as well as strain information, into online repositories for several isoprenol-producing strain designs. We then use these data to train machine learning algorithms that recommend new strain designs that are correctly predicted to improve isoprenol production by 23%. This demonstration is done by using synthetic data, as provided by a novel library, that can produce credible multiomics data for testing algorithms and computational tools. In short, this paper provides a step-by-step tutorial to leverage these computational tools to improve production in bioengineered strains.

09 BIOMASS FUELS↗

Toward understanding the dimensional crossover of canonical spin-glass thin films

Spin-glass thin films exhibit many features different from the bulk. The freezing temperatures of spin-glass films are suppressed for reduced thickness and follow the Kenning relation. The dynamics are altered near the vacuum interface. These phenomena are closely related to the lower critical dimension of spin glasses, the spin-glass correlation length, and the dimensional crossover from d = 3 to d = 2. In this article, we review the experimental facts and theoretical perspectives for spin-glass thin films. We focus on canonical spin-glass systems with the Ruderman–Kittel–Kasuya–Yosida (RKKY) interaction between magnetic impurities in a nonmagnetic host. Open questions to be addressed are emphasized.

interfacial effects↗

The Project “Analogs for Venus’ Geologically Recent Surfaces” (AVENGERS): A Comprehensive Database of Terrestrial Active Volcanoes for the Analysis of Ongoing Volcanism on Venus

The recently selected missions to Venus have opened a new era for the exploration of the Earth’s twin planet. As the Venus decade approaches, it is crucial to set the science goals for the future orbiting and in-situ investigations. One of the key science targets on Venus is certainly represented by the young topographic rises, which can be defined as the surface expression of underlying mantle plumes. These areas can be considered as the geologically youngest regions of Venus, being characterized by recent volcanic and tectonic activity. Studying areas of active volcanism and tectonism on Venus is crucial because it can reveal clues on the geologic past of the planet, as well as provide information about the volatile content of its interior and about the formation of its dense atmosphere. To this regard, the Project “Analogs for VENus’ GEologically Recent Surfaces” (AVENGERS) aims to build a database of Terrestrial analog sites for the analysis and identification of recent and possibly ongoing volcanic as well as tectonic activity on Venus to be investigated by the future missions. The Project AVENGERS will be a powerful tool for allowing a more efficient exploitation of the wealth of data to be provided by the future investigations of Venus during the upcoming decade.

P D Incecco↗

New Mie Scattering Diffuse Targets Development and Characterization

Earth science remote sensing observations require the detection and measurement of light originating from bright targets, such as clouds, and darker targets, such as an open ocean. This requirement drives the need to design, develop, and characterize improved calibration targets in support of current and future NASA instruments. New diffuse targets to be used as spectral albedo calibration standards were developed and characterized. The new targets based on fused silica or/and pressed and sintered Polytetrafluoroethylene (PTFE) were developed to be Earth scene specific. The various reflectance levels are achieved by modifying the material parameters, thickness, and surface finish. The new targets were characterized in laboratory and simulated space environments. We acquired high accuracy reflectance and transmittance data using a precision optical scatterometer and spectrophotometer located in the NASA Goddard Space Flight Center (GSFC) Diffuser Calibration Lab. The Total hemispherical reflectance (THR) and Bidirectional Reflectance Distribution Function (BRDF) were measured over the range of solar incident and scattered elevation and azimuthal angles typically realized on orbit by remote sensing instruments. We intend to space certify the new calibration targets after concluding on-orbit testing on the International Space Stations (ISS) scheduled for the second half of 2023.

Georgi Georgiev↗

Iowa Powder Atomization Technologies

The same atomization effect seen in a fuel injector is being applied to titanium metal resulting in fine titanium powders that are less than half the width of a human hair. Titanium melts above 3,000°F and is highly corrosive therefore requiring specialized containers. The liquid titanium is poured through an Ames Laboratory - USDOE patented tube which is intended to increase the energy efficiency of the atomization process, which has the ability to dramatically decrease the cost of fine titanium powders. This novel process could open markets for green manufacturing of titanium components from jet engines to biomedical implants.

36 MATERIALS SCIENCE↗

A Planet for Goldilocks: The Search for Evidence of Life Beyond Earth

A Planet for Goldilocks: The Search for Evidence of Life Beyond Earth "Not too hot, not too cold" begins the prescription for a world that's just right for life as we know it. Finding evidence of life beyond Earth is one of the primary goals of science agencies around the world thanks in large part to NASA's Kepler Mission which launched in 2009 with the objective of finding Goldilocks planets orbiting other stars like our Sun. Indeed, the space telescope opened our eyes to the terrestrial-sized planets that populate the galaxy as well as exotic worlds unlike anything that exists in the solar system. The mission ignited the search for life beyond earth via remote detection of atmospheric biosignatures on exoplanets. Most recently, our collective imagination was awakened by the discovery of Goldilocks worlds orbiting some of the nearest neighbors to the Sun, turning abstractions into destinations. Dr. Batalha will give an overview of the science legacy of the Kepler Mission and other key discoveries. She'll give a preview of what's to come by highlighting the missions soon to launch and those that are concepts taking shape on the drawing board.

Batalha, Natalie M.↗

Panel Session 36: Panel: Young Professionals in Nuclear Science and Engineering an International Perspective

This panel focuses on the young professional views from around the world on radioactive waste management. An informal panel will enable these future leaders of our industry to share ideas and experiences and develop contacts within peer groups on a genuine international level. The informal and interactive panel format will stimulate valuable discussion among the participants and the audience. The panel will be led by young professionals who will actively encourage participation from all those attending. Mentoring will be discussed. This panel aims to encourage fresh thinking and provide an opportunity for an open and frank discussion of issues. Presentations proposed include: 1 - International Youth Nuclear Congress (Alexander Borovskis, AusYGN (Australia)); 2 - AECOM Early Career Professionals Technology Exchange (Natalie Young, Washington River Protection Solutions (USA)); 3 - Young Professionals in Nuclear Science and Engineering - An International Perspective (Shona Thompson, Canadian Nuclear Safety Commission (Canada))

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Full-Automatic XAFS Measurement System of the Engineering Science Research II beamline BL14B2 at SPring-8

The Engineering Science Research II beamline BL14B2 at SPring-8 is a hard X-ray bending magnet beamline covering the wide energy range from 3.8 to 72 keV, and has been open to XAFS users since September 2007. The gas distribution and exhaust gas treatment systems have been installed for the in-situ XAFS measurements. Recent improvements in the speed of XAFS measurements have increased the demand for automated measurements. We have developed such a system, in which the adjustment of X-ray optics and the XAFS measurement in transmission mode can be performed automatically.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Jupiter Laser Facility Annual Report, FY 2025

Dear JLF community, I cannot believe I am now entering my third year as JLF director — time definitely flies when you are having fun! FY25 was another pivotal year for the Jupiter Laser Facility, marked by both scientific achievement and growing visibility for our community. Building on the successful reopening and refurbishment of the facility, we continued to demonstrate how JLF drives innovation in high energy density and fusion energy science, laser technology, and workforce development. Across Janus, Titan, and COMET, users executed a diverse portfolio of experiments, from dynamic compression and opacity measurements to laser plasma interactions, laboratory astrophysics, and advanced diagnostics. These efforts are highlighted in this report, including the development of new probes that capture the time evolution of plasmas on a single shot, and diagnostics and platforms that are already impacting experiments at NIF and other large facilities. JLF continues to serve as both a testbed for new ideas and a bridge to larger scale campaigns. FY25 also showcased the broader role of JLF within the Laboratory and the national HED science ecosystem. The NIF JLF User Groups Meeting in February brought nearly 180 participants to Livermore and highlighted the scientific progress made during JLF’s first full year of renewed operations. JLF research and users were recognized with Director’s Institutional Awards and Early and Mid Career awards, underscoring the quality and impact of the work performed here. Our team also contributed prominently to national conversations about laser safety, plasma physics, and inertial fusion energy through invited talks, conferences, and professional society leadership. JLF’s integration with LaserNetUS deepened this year as well. We launched a new technical exchange program across LaserNetUS facilities and kicked it off with a JLF team visit to the BELLA Center at Lawrence Berkeley National Laboratory. These exchanges are strengthening operations, sharing best practices, and improving the user experience across the network. Filming for the LaserNetUS “Behind the Scenes” series and participation in the annual LaserNetUS meeting further increased the visibility of our facility and our users. At the same time, JLF continues to play a central role in ambitious new programs, such as the Big Aperture Thulium laser effort funded through one of the DOE Office of Science Microelectronics Science Research Centers, which will use JLF infrastructure to explore next generation high rep rate lasers for EUV and x-ray source development. A core part of our mission remains training the next generation of scientists. In FY25, we welcomed another cohort of summer students, who joined experimental teams on Titan and presented their research at LLNL’s student poster symposium and national inertial fusion energy meetings. JLF users and early career scientists showcased their work at conferences across the country, highlighting experiments performed at the facility. These hands on experiences, and the mentoring provided by our staff and user teams, are central to JLF’s identity as a true user facility. Finally, FY25 reinforced JLF’s role as a focal point for partnerships and outreach. We hosted visits from international collaborators, science leaders, and we shared the story of the facility through venues such as the Big Ideas Lab podcast. These interactions help connect our work to a broader scientific and policy audience and open new pathways for collaboration. As we look ahead, the combination of refurbished hardware, new capabilities like STILETTO and enhanced short pulse performance on Titan, strong partnerships across LLNL and LaserNetUS, and a growing user community positions JLF for an even more ambitious program in the coming years. I am deeply grateful to our technical and operations staff for their dedication, to our LLNL partners for their continued support, and to our users for bringing bold, creative ideas to the facility. I look forward to more experiments, capabilities, partnerships, and groundbreaking science in the years to come! With brightest regards, Félicie Albert, JLF Director.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗