Search NASA⌕ Search

SEARCH · Search NASA

Results for “Optical Probe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

The interstellar spectrum of the supernova 1980k in NGC 6946

Bright supernovae in external galaxies offer a rare opportunity to probe the intervening interstellar media over very extended path-lengths, including the disk and halo of the Galaxy and the parent galaxy of the supernova. SN 1980k was discovered in NGC 6946 on 1980 October 29. In the first month after discovery, high resolution optical and ultraviolet observations were obtained to exploit the supernova as a probe of the intervening interstellar media. The obtained data are discussed. In the spectra, absorption lines were observed of Mg I, Mg II, Fe II, Mn II, Ca II and Na I. The absorption lines are attributed to the intervening interstellar media distributed over the very extended line of sight sampled, of order 7 Mpc. These lines are wider and stronger than any previously measured in the quiescent interstellar gas in the halo and disk of the Milky Way and of external galaxies

Pettini, M.↗

Role of multilayer-like interference effects on the transient optical response of Si{sub 3}N{sub 4} films pumped with free-electron laser pulses

X-ray/optical cross-correlation methods are attracting increasing interest for exploring transient states of matter using ultrashort free-electron laser (FEL) pulses. Our paper shows that in such studies the difference in the penetration depth of the FEL-pump and the infrared (IR) probe pulses become important, in particular, when exploring the changes in the optical properties of solid targets. We discuss the role of interference effects, using a phenomenological model with excited and unperturbed slabs. The reliability of this model was experimentally verified by measuring the transient optical response of free-standing and silicon (Si) supported silicon nitride (Si{sub 3}N{sub 4}) films, simultaneously in reflection and transmission, using s- and p-polarized IR light. The changes in the Si{sub 3}N{sub 4} optical refractive index, induced by the FEL pulses, have fully been described in the frame of the proposed model. The experimental results confirm that the differences, observed in the FEL-induced transient reflectance and transmittance of the Si{sub 3}N{sub 4} targets with different thicknesses, arise from multilayer-like interferometric phenomena.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

THz Pump and X-Ray Probe Development at LCLS

We report on measurements of broadband, intense, coherent transition radiation at terahertz frequencies, generated as the highly compressed electron bunches in Linear Coherent Light Source (LCLS) pass through a thin metal foil. The foil is inserted at 45{sup o} to the electron beam, 31 m downstream of the undulator. The THz emission passes downward through a diamond window to an optical table below the beamline. A fully compressed 350-pC bunch produces up to 0.5 mJ in a nearly half-cycle pulse of 50 fs FWHM with a spectrum peaking at 10 THz. We estimate a peak field at the focus of over 2.5 GV/m. A 20-fs Ti:sapphire laser oscillator has recently been installed for electro-optic measurements. We are developing plans to add an x-ray probe to this THz pump, by diffracting FEL x rays onto the table with a thin silicon crystal. The x rays would arrive with an adjustable time delay after the THz. This will provide a rapid start to user studies of materials excited by intense single-cycle pulses and will serve as a step toward a THz transport line for LCLS-II.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Active Plasmonics and Active Chiral Plasmonics through Orientation-Dependent Multipolar Interactions

While most active plasmonic efforts focus on responsive metamaterials to modulate optical response, we present a simple alternative based on applied orientation control that can likely be implemented for many passive plasmonic materials. Passive plasmonic motifs are simpler to prepare but cannot be altered postfabrication. Here, we show that such systems can be easily manipulated through substrate orientation control to generate both active plasmonic and active chiral plasmonic responses. Using gold nanocrescents as our model platform, we demonstrate tuning of optical extinction from -21% to +36% at oblique incidence relative to normal incidence. Variation of substrate orientation in relation to incident polarization is also demonstrated to controllably switch chiroptical handedness (e.g., Δg = ± 0.55). These active plasmonic responses arise from the multipolar character of resonant modes. In particular, we correlate magnetoelectric and dipole–quadrupole polarizabilities with different light-matter orientation-dependence in both near- and far-field localized surface plasmon activity. Additionally, the attribution of far-field optical response to higher-order multipoles highlights the sensitivity offered by these orientation-dependent characterization techniques to probe the influence of localized electromagnetic field gradients on a plasmonic response. The sensitivity afforded by orientation-dependent optical characterization is further observed by the manifestation in both plasmon and chiral plasmon responses of unpredicted structural nanocrescent variance (e.g., left- and right-tip asymmetry) not physically resolved through topographical imaging.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analytical and numerical modeling of optical second harmonic generation in anisotropic crystals using #SHAARP package

Electric-dipole optical second harmonic generation (SHG) is a second-order nonlinear process that is widely used as a sensitive probe to detect broken inversion symmetry and local polar order. Analytical modeling of the SHG polarimetry of a nonlinear optical material is essential to extract its point group symmetry and the absolute nonlinear susceptibilities. Current literature on SHG analysis involves numerous approximations and a wide range of (in)accuracies. We have developed an open-source package called the Second Harmonic Analysis of Anisotropic Rotational Polarimetry (#SHAARP.si) which derives analytical and numerical solutions of reflection SHG polarimetry from a single interface (.si) for bulk homogeneous crystals with arbitrary symmetry group, arbitrary crystal orientation, complex and anisotropic linear dielectric tensor with frequency dispersion, a general SHG tensor and arbitrary light polarization. #SHAARP.si enables accurate modeling of polarimetry measurements in reflection geometry from highly absorbing crystals or wedge-shaped transparent crystals. The package is extendable to multiple interfaces.

36 MATERIALS SCIENCE↗

Lattice Resonances of Nanohole Arrays for Quantum Enhanced Sensing

We report periodic arrays of nanoholes perforated in metallic thin films interact strongly with light and produce large electromagnetic near-field enhancements in their vicinity. As a result, the optical response of these systems is very sensitive to changes in their dielectric environment, thus making them an exceptional platform for the development of compact optical sensors. Given that these systems already operate at the shot-noise limit when used as optical sensors, their sensing capabilities can be enhanced beyond this limit by probing them with quantum light, such as squeezed or entangled states. Motivated by this goal, here, we present a comparative theoretical analysis of the quantum enhanced sensing capabilities of metallic nanohole arrays with one and two holes per unit cell. Through a detailed investigation of their optical response, we find that the two-hole array supports resonances that are narrower and stronger than its one-hole counterpart, and therefore have a higher fundamental sensitivity limit as defined by the quantum Cramer-Rao bound. We validate the optical response of the analyzed arrays with experimental measurements of the reflectance of representative samples. The results of this work advance our understanding of the optical response of these systems and pave the way for developing sensing platforms capable of taking full advantage of the resources offered by quantum states of light.

74 ATOMIC AND MOLECULAR PHYSICS↗

Development of a scintillator based fast-ion loss detector for the Wendelstein 7-X stellarator

A new scintillator based fast-ion loss detector (FILD) system has been designed for the Wendelstein 7-X (W7-X) stellarator. The mechanical design of the system is presented here along with engineering analyses of the system. This includes an assessment of the structural loads which also considers electromagnetic forces calculated for possible disruption scenarios as well as a mode frequency analysis of the system. Furthermore, an analysis of the thermal characteristics of the actively cooled probe head under prescribed steady state and transient heat loads is presented. Finally, the optical relay system is described and its properties used to forward model synthetic camera signals using the FILDSIM code and based on theoretical fast-ion losses incident on the probe head calculated using the ASCOT5 code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Phase control of probe response in a Doppler-broadened N-type four-level system

In this paper, we investigate theoretically the effect of the relative phase ({phi}) between the probe and driving fields on gain (absorption) and dispersion of the probe field in a Doppler-broadened N-type four-level system with spontaneously generated coherence from different respects. It is shown that gain (absorption) and dispersion are very sensitive to variations in the relative phase, and changing the Doppler width also has an obvious effect on the phase-dependent gain (absorption) and dispersion. When the probe and driving fields have the same propagation directions (copropagating), for the same Doppler width, the dispersion curve with {phi}={alpha} is the same as the gain (absorption) curve with {phi}={alpha}+{pi}/2; however, when the probe and driving fields have opposite propagation directions (counterpropagating), the dispersion curve and gain (absorption) curve are different and the difference becomes more considerable with an increase in Doppler width. In the co- and counterpropagating cases, gain (absorption) and dispersion always vary periodically with varying {phi}, and the period is 2{pi}. By adjusting the value of {phi}, the largest gain (absorption) and dispersion can be obtained, and a large index of refraction without absorption can be realized. Generally speaking, gain decreases with an increase in Doppler width, but by adjusting value of {phi}, at some special values of Doppler width, a larger gain than that without Doppler broadening can be obtained. Our study also shows that gain in the copropagating case is much larger than that in the counterpropagating case.

74 ATOMIC AND MOLECULAR PHYSICS↗

Influence of Sm{sup 3+} ions on structural, optical and solar light driven photocatalytic activity of spinel MnFe{sub 2}O{sub 4} nanoparticles

In this article, co-precipitation method was used to produce a series of samarium substituted manganese ferrite nanoparticles, MnFe{sub 2−x}Sm{sub x}O{sub 4} (x = 0.0, 0.5, 1.0, 1.5, 2.0) with oleic acid as surfactant. The effect of Sm{sup 3+} substitution and calcination temperature on the MnFe{sub 2}O{sub 4} was explored. The MnFe{sub 2−x}Sm{sub x}O{sub 4} sample calcinated at 973 K induced an enhanced optical behaviour. The influence of Sm{sup 3+} ions on cationic distribution and optical properties of MnFe{sub 2}O{sub 4} were probed by various physicochemical techniques. The presence of secondary orthorhombic (SmFeO{sub 3}) phase with initial cubic phase was confirmed by doublet peak in the X-ray diffraction pattern. The particle size distribution of MnFe{sub 0.5}Sm{sub 1.5}O{sub 4} sample was about 40 nm from HRTEM. The visible light absorption ability extended as Sm content was increased up to x = 1.5 in MnFe{sub 2}O{sub 4}. At an optimum concentration of Sm as x = 1.5 in MnFe{sub 2}O{sub 4}, photocatalyst exhibited decrease in energy band gap (1.64 eV); as a result effective visible light driven photocatalytic activity was achieved than the pure MnFe{sub 2}O{sub 4}. The MnSm{sub 1.5}Fe{sub 0.5}O{sub 4} sample exhibits pronounced photodegradation towards Rose Bengal with in 50 min under direct sunlight illumination as energy input. The broad emission band is observed in the entire photoluminescence (PL) spectrum. Current study provides an excellent competency of rare earth substituted ferrite as a new class of photocatalyst and they found to be a beneficial in the field of environmental cleaning application. - Highlights: • MnSm{sub x}Fe{sub 2−x}O{sub 4} nanoparticles were synthesised by co-precipitation method. • The insertion of Sm{sup 3+} ion in the MnFe{sub 2}O{sub 4} spinel matrix shows an increase in lattice parameter. • The calcination temperature is sensitive knob for tuning the optical properties of the MnFe{sub 2−x}Sm{sub x}O{sub 4} photocatalyst. • The MnFe{sub 2−x}Sm{sub x}O{sub 4} calcinated at 973 K shows enhanced optical behaviour. • The composition MnFe{sub 0.5}Sm{sub 1.5}O{sub 4} showed substantial red shift in absorption edge with narrow band gap of 1.64 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Field-Sensitive Materials for Optical Applications

The purpose of investigation is to develop the fundamental materials and fabrication technology for field-controlled spectrally active optics that are essential for industry, NASA, and DOD (Department of Defense) applications such as: membrane optics, filters for LIDARs (Light Detection and Ranging), windows for sensors and probes, telescopes, spectroscopes, cameras, light valves, light switches, flat-panel displays, etc. The proposed idea is based on the quantum-dots (QD) array or thin-film of field-sensitive Stark and Zeeman materials and the bound excitonic state of organic crystals that will offer optical adaptability and reconfigurability. Major tasks are the development of concept demonstration article and test data of field-controlled spectrally smart active optics (FCSAO) for optical multi-functional capabilities on a selected spectral range.

Choi, Sang H.↗

Probing nanoparticle substrate interactions with synchrotron infrared nanospectroscopy: Coupling gold nanorod Fabry-Pérot resonances with SiO 2 and $h$-BN phonons

Spectroscopic interrogation of materials in the midinfrared with nanometer spatial resolution is inherently difficult due to the long wavelengths involved, reduced detector efficiencies, and limited availability of spectrally bright, coherent light sources. Technological advances are driving techniques that overcome these challenges, enabling material characterization in this relatively unexplored spectral regime. Synchrotron infrared nanospectroscopy (SINS) is an imaging technique that provides local sample information of nanoscale target specimens in an experimental energy window between 330 and 5000 cm -1 . Here, using SINS, we analyzed a series of individual gold nanorods patterned on a SiO 2 substrate and on a flake of hexagonal boron nitride. The SINS spectra reveal interactions between the nanorod photonic Fabry-Pérot resonances and the surface phonon polaritons of each substrate, which are characterized as avoided crossings. A coupled oscillator model of the hybrid system provides a deeper understanding of the coupling and provides a theoretical framework for future exploration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Single-spin sensing of domain-wall structure and dynamics in a thin-film skyrmion host

Skyrmions are nanoscale magnetic structures with features promising for future low-power memory or logic devices. In this work, we demonstrate scanning techniques based on nitrogen vacancy center magnetometry that simultaneously probe both the magnetic dynamics and structure of room temperature skyrmion bubbles in a thin-film system Ta/CoFeB/MgO. We confirm the handedness of the Dzyaloshinskii-Moriya interaction in this material and extract the magnitude of the helicity angle of the skyrmion bubbles. Our measurements also show that the skyrmion bubbles in this material change size in discrete steps, dependent on the local pinning environment, with their average size determined dynamically as their domain walls hop between pinning sites. In addition, an increase in magnetic field noise is observed near skyrmion bubble domain walls. These measurements highlight the importance of interactions between internal degrees of freedom of skyrmion bubble domain walls and pinning sites in thin-film systems. Furthermore, our observations have relevance for future devices based on skyrmion bubbles where pinning interactions will determine important aspects of current-driven motion.

36 MATERIALS SCIENCE↗

Two-dimensional electronic spectroscopy based on conventional optics and fast dual chopper data acquisition

We report an improved experimental scheme for two-dimensional electronic spectroscopy (2D-ES) based solely on conventional optical components and fast data acquisition. This is accomplished by working with two choppers synchronized to a 10 kHz repetition rate amplified laser system. We demonstrate how scattering and pump-probe contributions can be removed during 2D measurements and how the pump probe and local oscillator spectra can be generated and saved simultaneously with each population time measurement. As an example the 2D-ES spectra for cresyl violet were obtained. The resulting 2D spectra show a significant oscillating signal during population evolution time which can be assigned to an intramolecular vibrational mode.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Efficiency of light-frequency conversion in an atomic ensemble

The efficiency of frequency up and down conversion of light in an atomic ensemble, with a diamond level configuration, is analyzed theoretically. The conditions of pump field intensities and detunings required to maximize the conversion as a function of optical thickness of the ensemble are determined. The influence of the probe pulse duration on the conversion efficiency is investigated by numeric solution of the Maxwell-Bloch equations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Overcoming Oxidation State-Dependent Spectral Interferences: Online Monitoring of U(VI) Reduction to U(IV) via Raman and UV–vis Spectroscopy

Analytical characterization of chemical processes is an essential component of both industrial processes and fundamental studies. Applicable techniques abound, but optical spectroscopy has the unique combination of being easily incorporated into on-line (in-situ) monitoring probes and can also provide abundant chemical information (concentration, oxidation state, speciation). However, this abundance of chemical information can make applying optical spectroscopy to complex chemical processes challenging. This is particularly evident in the bulk electrolysis of U(VI) to U(IV), an essential preparatory step in some nuclear fuel recycling schemes. Starting and product materials have interfering spectral signatures in both electronic and vibrational spectroscopies, making accurate and real-time analysis difficult to achieve. In this paper, we discuss the application of optical spectroscopy to the on-line monitoring of a bulk electrolysis process and the methods utilized to analyze data as well as characterize the efficiency and mechanism of U(IV) generation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A divertor scraper observation system for the Wendelstein 7-X stellarator

Two graphite divertor elements called scrapers have been installed on the Wendelstein 7-X stellarator in the throat of the magnetic island divertor. To diagnose one, we have designed, built, calibrated, and installed a new infrared/visible imaging endoscope system to enable detailed observations of the plasma interactions and heat loads at one of the scrapers and the nearby divertor surfaces. The new system uses a shuttered pinhole-protected pair of 90° off-axis 228 mm focal length aluminum parabolic mirrors, and two flat turning metal mirrors, to send light to a sapphire vacuum window 1.6 meters away, beyond which we have co-located telephoto lens-based infrared and visible cameras. The back-to-back off-axis parabolas serve to cancel out most aberrations, enabling the use of off-the-shelf commercial optics outside of the vessel. For the infrared, we use a 3-5 μm 1-megapixel FLIR SC8303HD camera and for the visible, a 5-megapixel CMOS PCO 5.5 edge camera. A short 1-m quartz pickoff fiber is used to send 200-1100 nm light to a compact spectrometer, also located in the same iron shield box as the cameras. The camera field of view covers the 700 mm length of the scraper, and includes locations monitored by thermocouples and Langmuir probes embedded in some of the scraper tiles. Predicted and actual optical test performances of the overall system are then compared.

47 OTHER INSTRUMENTATION↗

Results of the Compensated Earth-Moon-Earth Retroreflector Laser Link (CEMERLL) Experiment

Adaptive optics techniques can be used to realize a robust low bit-error-rate link by mitigating the atmosphere-induced signal fades in optical communications links between ground-based transmitters and deep-space probes. Phase I of the Compensated Earth-Moon-Earth Retroreflector Laser Link (CEMERLL) experiment demonstrated the first propagation of an atmosphere-compensated laser beam to the lunar retroreflectors. A 1.06-micron Nd:YAG laser beam was propagated through the full aperture of the 1.5-m telescope at the Starfire Optical Range (SOR), Kirtland Air Force Base, New Mexico, to the Apollo 15 retroreflector array at Hadley Rille. Laser guide-star adaptive optics were used to compensate turbulence-induced aberrations across the transmitter's 1.5-m aperture. A 3.5-m telescope, also located at the SOR, was used as a receiver for detecting the return signals. JPL-supplied Chebyshev polynomials of the retroreflector locations were used to develop tracking algorithms for the telescopes. At times we observed in excess of 100 photons returned from a single pulse when the outgoing beam from the 1.5-m telescope was corrected by the adaptive optics system. No returns were detected when the outgoing beam was uncompensated. The experiment was conducted from March through September 1994, during the first or last quarter of the Moon.

Wilson, K. E.↗

Quantum reading of unitary optical devices

We address the problem of quantum reading of optical memories, namely the retrieving of classical information stored in the optical properties of a media with minimum energy. We present optimal strategies for ambiguous and unambiguous quantum reading of unitary optical memories, namely when one's task is to minimize the probability of errors in the retrieved information and when perfect retrieving of information is achieved probabilistically, respectively. A comparison of the optimal strategy with coherent probes and homodyne detection shows that the former saves orders of magnitude of energy when achieving the same performances. Experimental proposals for quantum reading which are feasible with present quantum optical technology are reported.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗