Search NASA⌕ Search

SEARCH · Search NASA

Results for “Random effect model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Investigation of the isoscalar response of 24 Mg to 6 Li scattering

24 Mg is a strongly deformed nucleus in the ground state. Deformation effects can be observed in the structure of the isoscalar giant monopole and quadrupole resonances. 24 Mg is also a nucleus that is well known to present different types of cluster-oscillation modes. Both giant resonances and cluster states are strongly populated by isoscalar transitions. To extract the E0, E1, and E2 transition strengths via 6 Li scattering. The 6 Li probe is a powerful tool for investigating the isoscalar nuclear response with a very favorable ratio of resonance-to-continuum background. Double-differential cross sections of 6 Li inelastic scattering, at the beam energy of 100 MeV/u, were measured in the excitation-energy range 10 – 40 MeV and scattering angles 0 - 3°. A multipole-decomposition analysis was performed for extracting the isoscalar E0 , E1, and E2 strength distributions. Results: The extracted multipole strengths were compared with predictions from consistent quasiparticle random phase approximation calculations. The theoretical predictions are in fair agreement with the experimental data. The E0 strength was also compared with results from antisymmetrized molecular dynamics calculations found in the literature. A few peaks in the experimental data might be associated with clustering in 24 Mg. Ground-state deformation effects were observed in the isoscalar giant monopole resonance (ISGMR) and isoscalar giant quadrupole resonance (ISGQR) distributions. The ISGMR strength is split in two peaks around 19 and 28 MeV. The ISGQR exhibits a pronounced peak at 20 MeV with a broadening at the low-energy region, similar to predictions from microscopic calculations. Signatures of excitation of cluster states were observed in the E0 response. Further studies including particle-decay measurements will be required to confirm the nature of the observed peaks.

20 ≤ A ≤ 38↗

The effects of 8-week complex training on lower-limb strength and power of Chinese elite female modern pentathlon athletes

Complex training (CT) is a combination training method that alternates between performing high-load resistance training (RT) and plyometric training within one single session. The study aimed to examine the effects of CT on lower-limb strength and power of elite female modern pentathlon athletes under the new modern pentathlon format and competition rules. Ten female participants (age: 23.55 ± 2.22 years, weight: 60.59 ± 3.87 kg, height: 169.44 ± 4.57 cm, and training experience: 6.90 ± 2.08 years) of the national modern pentathlon team completed 8 weeks of RT as followed by 8 weeks of CT, with 2 weeks of break. Then, the participants conducted 8 weeks of CT, which included RT combined with plyometric training (e.g., drop jump and continuous jump). All stages of training were designed by the linear strength training period theories, requiring participants to train twice for the first 4 weeks and three times for the second 4 weeks. The one-repetition maximum (1RM) of squat, isometric mid-thigh pull (IMTP), counter-movement jump (CMJ), squat jump (SJ), pre-stretch augmentation percentage (PSAP), and reaction strength index (RSI) were assessed before and after both RT and CT training. One-way repeated-measure ANOVA models revealed that the 1RM of squat was significantly improved ( p < 0.001) after RT as compared to pre-RT. No significant improvement in IMTP ( p = 0.055), CMJ ( p = 0.194), SJ ( p = 0.692), PSAP ( p = 0.087), and RSI ( p = 0.238) was not observed. After CT, 1RM of squat ( p < 0.001), IMTP ( p < 0.035), CMJ ( p < 0.001), SJ ( p < 0.008), RSI ( p < 0.006) were significant improved as compared to pre-RT, post-RT and pre-CT, while significant improvements in PSAP were observed as compared to pre-RT ( p = 0.003) and pre-CT ( p = 0.027), but not to post-RT ( p = 0.156). This pilot study showed the promise of CT following RT to improve lower-limb strength and power in elite female modern pentathlon athletes. The findings are worthwhile to be confirmed in future studies with larger sample size and randomized design.

Qiao, Zining↗

Development of pseudo-random binary arrays for calibration of surface profile metrology tools

Optical Metrology tools, especially for short wavelength (EUV and X-Ray), must cover a wide range of spatial frequencies from the very low, which affects figure, to the important mid-spatial frequencies and the high spatial frequency range, which produces undesirable scattering. A major difficulty in using surface profilometers arises due to the unknown Point-Spread Function (PSF) of the instruments [1] that is responsible for distortion of the measured surface profile. Generally, the distortion due to the PSF is difficult to account because the PSF is a complex function that comes to the measurement via the convolution operation, while the measured profile is described with a real function. Accounting for instrumental PSF becomes significantly simpler if the result of measurement of a profile is presented in a spatial frequency domain as a Power Spectral Density (PSD) distribution [2]. For example, the measured PSD distributions provide a closed set of data necessary for three-dimensional calculations of scattering of light by the optical surfaces [3], [4]. The distortion of the surface PSD distribution due to the PSF can be modeled with the Modulation Transfer Function (MTF), which is defined over the spatial frequency bandwidth of the instrument [1], [2]. The measured PSD distribution can be presented as a product of the squared MTF and the ideal PSD distribution inherent for the System Under Test (SUT). Therefore, the instrumental MTF can be evaluated by comparing a measured PSD distribution of a known test surface with the corresponding ideal numerically simulated PSD. The square root of the ratio of the measured and simulated PSD distributions gives the MTF of the instrument. In previous work [5], [6] the instrumental MTF of a surface profiler was precisely measured using reference test surfaces based on Binary Pseudo-Random (BPR) gratings. Here, we present results of fabricating and using two-dimensional (2D) BPR arrays that allow for a direct 2D calibration of the instrumental MTF. BPR sequences are widely used in engineering and communication applications such as Global Position System, and wireless communication protocols. The ideal BPR pattern has a flat 'white noise' response over the entire range of spatial frequencies of interest. The BPR array used here is based on the Uniformly Redundant Array prescription [7] initially used for x-ray and gamma ray astronomy applications. The URA's superior imaging capability originates from the fact that its cyclical autocorrelation function very closely approximates a delta function, which produces a flat PSD. Three different size BPR array patterns were fabricated by electron beam lithography and ICP etching of silicon. The basic size unit was 200 nm, 400 nm, and 600 nm. Two different etch processes were used, CF{sub 4}/Ar and HBr, which resulted in undercut and vertical sidewall profiles, respectively. The 2D BPR arrays were used as standard test surfaces for MTF calibration of the MicroMap{trademark}-570 interferometric microscope using all available objectives. The HBr etched two-dimensional BPR arrays have proven to be a very effective calibration standard making possible direct calibration corrections without the need of additional calculation considerations, while departures from the ideal vertical sidewall require an additional correction term for the CF{sub 4}/Ar etched samples. [8] Initial surface roughness of low cost 'prime' wafers limits low magnification calibration but should not be a limitation if better polished samples are used.

36 MATERIALS SCIENCE↗

Competing magnetic fluctuations and orders in a multiorbital model of doped SrCo 2 ⁢As 2

We revisit the intriguing magnetic behavior of the paradigmatic itinerant frustrated magnet Sr⁢Co 2 ⁢As 2 , which shows strong and competing magnetic fluctuations yet does not develop long-range magnetic order. By calculating the static spin susceptibility Χ⁡(q) within a realistic 16-orbital Hubbard-Hund model, we determine the leading instability to be ferromagnetic (FM). We then explore the effect of doping and calculate the critical Hubbard interaction strength U c that is required for the development of magnetic order. We find that U c decreases under electron doping and with increasing Hund's coupling J, but increases rapidly under hole doping. This suggests that magnetic order could possibly emerge under electron doping but not under hole doping, which agrees with experimental findings. We map out the leading magnetic instability as a function of doping and Hund's coupling and find several antiferromagnetic phases in addition to FM. We also quantify the degree of itinerant frustration in the model and resolve the contributions of different orbitals to the magnetic susceptibility. Lastly, we discuss the dynamic spin susceptibility Χ⁡(q,ω) at finite frequencies, where we recover the anisotropy of the peaks at Q π = (π,0) and (0,π) observed by inelastic neutron scattering that is associated with the phenomenon of itinerant magnetic frustration. By comparing results between theory and experiment, we conclude that the essential experimental features of doped SrCo 2 ⁢As 2 are well captured by an itinerant Hubbard-Hund multiorbital model if one considers a small shift of the chemical potential towards hole doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development Status of the PEBBLES Code for Pebble Mechanics: Improved Physical Models and Speed-up

PEBBLES is a code for simulating the motion of all the pebbles in a pebble bed reactor. Since pebble bed reactors are packed randomly and not precisely placed, the location of the fuel elements in the reactor is not deterministically known. Instead, when determining operating parameters the motion of the pebbles can be simulated and stochastic locations can be found. The PEBBLES code can output information relevant for other simulations of the pebble bed reactors such as the positions of the pebbles in the reactor, packing fraction change in an earthquake, and velocity profiles created by recirculation. The goal for this level three milestone was to speedup the PEBBLES code through implementation on massively parallel computer. Work on this goal has resulted in speeding up both the single processor version and creation of a new parallel version of PEBBLES. Both the single processor version and the parallel running capability of the PEBBLES code have improved since the fiscal year start. The hybrid MPI/OpenMP PEBBLES version was created this year to run on the increasingly common cluster hardware profile that combines nodes with multiple processors that share memory and a cluster of nodes that are networked together. The OpenMP portions use the Open Multi-Processing shared memory parallel processing model to split the task across processors in a single node that shares memory. The Message Passing Interface (MPI) portion uses messages to communicate between different nodes over a network. The following are wall clock speed up for simulating an NGNP-600 sized reactor. The single processor version runs 1.5 times faster compared to the single processor version at the beginning of the fiscal year. This speedup is primarily due to the improved static friction model described in the report. When running on 64 processors, the new MPI/OpenMP hybrid version has a wall clock speed up of 22 times compared to the current single processor version. When using 88 processors, a speed up of 23 times is achieved. This speedup and other improvements of PEBBLES combine to make PEBBLES more capable and more useful for simulation of a pebble bed reactor. This report details the implementation and effects of the speedup work done over the course of the fiscal year.

10 SYNTHETIC FUELS↗

Development Status of the PEBBLES Code for Pebble Mechanics: Improved Physical Models and Speed-up

PEBBLES is a code for simulating the motion of all the pebbles in a pebble bed reactor. Since pebble bed reactors are packed randomly and not precisely placed, the location of the fuel elements in the reactor is not deterministically known. Instead, when determining operating parameters the motion of the pebbles can be simulated and stochastic locations can be found. The PEBBLES code can output information relevant for other simulations of the pebble bed reactors such as the positions of the pebbles in the reactor, packing fraction change in an earthquake, and velocity profiles created by recirculation. The goal for this level three milestone was to speedup the PEBBLES code through implementation on massively parallel computer. Work on this goal has resulted in speeding up both the single processor version and creation of a new parallel version of PEBBLES. Both the single processor version and the parallel running capability of the PEBBLES code have improved since the fiscal year start. The hybrid MPI/OpenMP PEBBLES version was created this year to run on the increasingly common cluster hardware profile that combines nodes with multiple processors that share memory and a cluster of nodes that are networked together. The OpenMP portions use the Open Multi-Processing shared memory parallel processing model to split the task across processors in a single node that shares memory. The Message Passing Interface (MPI) portion uses messages to communicate between different nodes over a network. The following are wall clock speed up for simulating an NGNP-600 sized reactor. The single processor version runs 1.5 times faster compared to the single processor version at the beginning of the fiscal year. This speedup is primarily due to the improved static friction model described in the report. When running on 64 processors, the new MPI/OpenMP hybrid version has a wall clock speed up of 22 times compared to the current single processor version. When using 88 processors, a speed up of 23 times is achieved. This speedup and other improvements of PEBBLES combine to make PEBBLES more capable and more useful for simulation of a pebble bed reactor. This report details the implementation and effects of the speedup work done over the course of the fiscal year.

10 SYNTHETIC FUELS↗

CF{sub 4} plasma treatment on nanostructure band engineered Gd{sub 2}O{sub 3}-nanocrystal nonvolatile memory

The effects of CF{sub 4} plasma treatment on Gd{sub 2}O{sub 3} nanocrystal (NC) memory were investigated. For material analysis, secondary ion mass spectrometry and x-ray photoelectron spectroscopy analyses were performed to characterize the fluorine depth profile of the Gd{sub 2}O{sub 3}-NC film. In addition, an UV-visible spectrophotometer was used to obtain the Gd{sub 2}O{sub 3} bandgap and analyzed to suggest the modified structure of the energy band. Moreover, the electrical properties, including the memory window, program/erase speed, charge retention, and endurance characteristics were significantly improved depending on the CF{sub 4} plasma treatment conditions. This can be explained by the physical model based on the built-in electric field in the Gd{sub 2}O{sub 3} nanostructure. However, it was observed that too much CF{sub 4} plasma caused large surface roughness induced by the plasma damage, leading to characteristics degradation. It was concluded that with suitable CF{sub 4} plasma treatment, this Gd{sub 2}O{sub 3}-NC memory can be applied to future nonvolatile memory applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dosimetric and biological impact of activity extravasation of radiopharmaceuticals in PET imaging

The increasing use of nuclear medicine and PET imaging has intensified scrutiny of radiotracer extravasation. To our knowledge, this topic is understudied but holds great potential for enhancing our understanding of extravasation in clinical PET imaging. This work aims to (1) quantify the absorbed doses from radiotracer extravasation in PET imaging, both locally at the site of extravasation and with the extravasation location as a source of exposure to bodily organs and (2) assess the biological ramifications within the injection site at the cellular level. A radiation dosimetry simulation was performed using a whole-body 4D Extended Cardiac-Torso (XCAT) phantom embedded in the GATE Monte Carlo platform. A 10-mCi dose of 18 F-FDG was chosen to simulate a typical clinical PET scan scenario, with 10% of the activity extravasated in the antecubital fossa of the right arm of the phantom. The extravasation volume was modeled as a 5.5 mL rectangle in the hypodermal layer of skin. Absorbed dose contributions were calculated for the first two half-lives, assuming biological clearance thereafter. Dose calculations were performed as absorbed doses at the organ and skin levels. Energy deposition was simulated both at the local extravasation site and in multiple organs of interest and converted to absorbed doses based on their respective masses. Each simulation was repeated ten times to estimate Monte Carlo uncertainties. Biological impacts on cells within the extravasated volume were evaluated by randomizing cells and exposing them to a uniform radiation source of 18 F and 68 Ga. Particle types, their energies, and direction cosines were recorded in phase space files using a separate Geant4 simulation to characterize their entry into the nucleus of the cellular volume. Subsequently, the phase space files were imported into the TOPAS-nBio simulation to assess the extent of DNA damage, including double-strand breaks (DSBs) and single-strand breaks (SSBs). Organ-level dosimetric estimations are presented for 18 F and 68 Ga radionuclides in various organs of interest. With 10% extravasation, the hypodermal layer of the skin received the highest absorbed dose of 1.32 ± 0.01 Gy for 18 F and 0.99 ± 0.01 Gy for 68 Ga. The epidermal and dermal layers received absorbed doses of 0.07 ± 0.01 Gy and 0.13 ± 0.01 Gy for 18 F, and 0.14 ± 0.01 Gy and 0.29 ± 0.01 Gy for 68 Ga, respectively. In the extravasated volume, 18 F caused an average absorbed dose per nucleus of 0.17 ± 0.01 Gy, estimated to result in 10.58 ± 0.50 DSBs and 268.11 ± 12.43 SSBs per nucleus. For 68 Ga, the absorbed dose per nucleus was 0.11 ± 0.01 Gy, leading to an estimated 6.49 ± 0.34 DSBs and 161.24 ± 8.12 SSBs per nucleus. Absorbed doses in other organs were on the order of micro-gray (µGy). The likelihood of epidermal erythema resulting from extravasation during PET imaging is low, as the simulated absorbed doses to the epidermis remain below the thresholds that trigger such effects. Moreover, the organ-level absorbed doses were found to be clinically insignificant across various simulated organs. The minimal DNA damage at the extravasation site suggests that long-term harm, such as radiation-induced carcinogenesis, is highly unlikely.

DNA strand breaks↗

Trends in electronic structures and s ± -wave pairing for the rare-earth series in bilayer nickelate superconductor R 3 Ni 2 O 7

The recent discovery of pressure-induced superconductivity in the bilayer La 3 Ni 2 O 7 (LNO) has opened a new platform for the study of unconventional superconductors. In this publication, we investigate theoretically the whole family of bilayer 327-type nickelates R 3 Ni 2 O 7 (R = rare-earth elements) under pressure. From La to Lu, the lattice constants and volume decrease, leading to enhanced in-plane and out-of-plane hoppings, resulting in an effectively reduced electronic correlation U / W. Furthermore, the Ni's t 2g states shift away from the e g states, while the crystal-field splitting between d 3z 2 -r 2 and d x 2 -y 2 is almost unchanged. In addition, six candidates were found to become stable in the Fmmm phase, with increasing values of critical pressure as the atomic number increases. Similar to the case of LNO, the s ± -wave pairing tendency dominates in all candidates, due to the nesting between the M = (π , π) and the X = (π , 0) and Y = (0 , π) points in the Brillouin zone. Then, T c is expected to decrease as the radius of rare-earth (RE) ions decreases. In conclusion, our results suggest that LNO is already the “optimal” candidate, with Ce a close competitor, among the whole of the RE bilayer nickelates, and to increase T c we suggest growing on special substrates with larger in-plane lattice spacings.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Intrinsic nonlocality of spin- and polarization-resolved probabilities in strong-field quantum electrodynamics

Spin and polarization are central to precision tests of fundamental physics and for interpreting radiation from astrophysical sources and ultraintense laser-matter experiments. Here, focusing on the fundamental process of nonlinear Compton scattering, we demonstrate that a key assumption underlying current strong-field quantum electrodynamics models, i.e., that emission can be treated as an instantaneous random event sampled from a local differential rate, is inconsistent once emission angles, electron spin, and/or photon polarization are resolved. Namely, even in strictly constant and uniform fields , the resulting fully differential distribution is sign indefinite, yielding negative inferred probabilities. The physical reason is that the photon emission probability builds up over a finite length of the electron trajectory, the formation region, during which the electron direction changes by roughly the same small angle that defines the radiation cone. Therefore, we put forward a new method where we integrate over this formation region analytically to obtain a physically consistent electron spin and photon polarization model. We show that the implementation of our model is compatible with existing Monte Carlo and particle-in-cell workflows. Simulations of a GeV-class electron-laser collision accessible at current petawatt facilities and of emission in a pulsarlike magnetic field are shown to reveal spin and polarization patterns that differ even qualitatively from state-of-the-art local models. In particular, our new model predicts substantial angle-dependent circular photon polarization where the well-known collinear-emission approach yields none, and a pronounced helicity bias in the recoiling electrons absent from current predictions. These findings have direct implications for upcoming strong-field QED experiments and for interpreting polarized radiation from extreme astrophysical environments.

astrophysical electromagnetic fields↗

Synthesis and characterization of the K{sub 2}NiF{sub 4} phases La{sub 1+x}Sr{sub 1-x}Co{sub 0.5}Fe{sub 0.5}O{sub 4-{delta}} (x=0, 0.2)

The K{sub 2}NiF{sub 4} phases LaSrCo{sub 0.5}Fe{sub 0.5}O{sub 4} and La{sub 1.2}Sr{sub 0.8}Co{sub 0.5}Fe{sub 0.5}O{sub 4}, and their reduced forms LaSrCo{sub 0.5}Fe{sub 0.5}O{sub 3.75} and La{sub 1.2}Sr{sub 0.8}Co{sub 0.5}Fe{sub 0.5}O{sub 3.85}, have been successfully prepared by solid-state reactions, followed by reduction in 10% H{sub 2}/N{sub 2} in order to produce oxygen-deficient materials. All materials crystallize in a tetragonal K{sub 2}NiF{sub 4} structure (space group I4/mmm) with Co and Fe randomly distributed over the B-sites of the structure. Moessbauer spectra have confirmed the trivalent state of Fe in these materials. In the reduced materials, oxide ion vacancies are confined to the equatorial planes of the K{sub 2}NiF{sub 4} structure and the Co is present almost entirely as Co{sup 2+} ions; low-temperature neutron powder diffraction data reveal that these reduced phases are antiferromagnetically ordered with a tetragonal noncollinear arrangement of the moments. The Co{sup 3+} ions, present in stoichiometric LaSrCo{sub 0.5}Fe{sub 0.5}O{sub 4} and La{sub 1.2}Sr{sub 0.8}Co{sub 0.5}Fe{sub 0.5}O{sub 4}, inhibit magnetic order and are assumed to be in the low-spin state. - Graphical abstract: The reduced K{sub 2}NiF{sub 4} phases LaSrCo{sub 0.5}Fe{sub 0.5}O{sub 3.75} and La{sub 1.2}Sr{sub 0.8}Co{sub 0.5}Fe{sub 0.5}O{sub 3.85} accommodate disordered oxide ion vacancies confined to equatorial planes of the structure. Magnetic exchange results in AFM order at low temperature, which can be represented by a tetragonal noncollinear model for the moments. Co{sup 3+} ions, present in stoichiometric LaSrCo{sub 0.5}Fe{sub 0.5}O{sub 4} and La{sub 1.2}Sr{sub 0.8}Co{sub 0.5}Fe{sub 0.5}O{sub 4}, inhibit magnetic order and are assumed to be in the low-spin state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SU-F-T-202: An Evaluation Method of Lifetime Attributable Risk for Comparing Between Proton Beam Therapy and Intensity Modulated X-Ray Therapy for Pediatric Cancer Patients by Averaging Four Dose-Response Models for Carcinoma Induction

Purpose: To examine how much lifetime attributable risk (LAR) as an in silico surrogate marker of radiation-induced secondary cancer would be lowered by using proton beam therapy (PBT) in place of intensity modulated x-ray therapy (IMXT) in pediatric patients. Methods: From 242 pediatric patients with cancers who were treated with PBT, 26 patients were selected by random sampling after stratification into four categories: a) brain, head, and neck, b) thoracic, c) abdominal, and d) whole craniospinal (WCNS) irradiation. IMXT was re-planned using the same computed tomography and region of interest. Using dose volume histogram (DVH) of PBT and IMXT, the LAR of Schneider et al. was calculated for the same patient. The published four dose-response models for carcinoma induction: i) full model, ii) bell-shaped model, iii) plateau model, and ix) linear model were tested for organs at risk. In the case that more than one dose-response model was available, the LAR for this patient was calculated by averaging LAR for each dose-response model. Results: Calculation of the LARs of PBT and IMXT based on DVH was feasible for all patients. The mean±standard deviation of the cumulative LAR difference between PBT and IMXT for the four categories was a) 0.77±0.44% (n=7, p=0.0037), b) 23.1±17.2%,(n=8, p=0.0067), c) 16.4±19.8% (n=8, p=0.0525), and d) 49.9±21.2% (n=3, p=0.0275, one tailed t-test), respectively. The LAR was significantly lower by PBT than IMXT for the the brain, head, and neck region, thoracic region, and whole craniospinal irradiation. Conclusion: In pediatric patients who had undergone PBT, the LAR of PBT was significantly lower than the LAR of IMXT estimated by in silico modeling. This method was suggested to be useful as an in silico surrogate marker of secondary cancer induced by different radiotherapy techniques. This research was supported by the Translational Research Network Program, JSPS KAKENHI Grant No. 15H04768 and the Global Institution for Collaborative Research and Education (GI-CoRE), Hokkaido University, founded by the Ministry of Education, Culture, Sports, Science and Technology (MEXT), Japan.

60 APPLIED LIFE SCIENCES↗

TCAD-Machine Learning Enabled TID Compact Model Development for Commercial SiC MOSFET

We propose a TCAD (Technology Computer Aided Design)-machine learning coupled approach that combines a TCAD tool (Charon), optimization/uncertainty quantification tool (Dakota), surrogate models, and Bayesian learning capabilities. The coupling approach is used for accurate modeling and calibration of total ionizing dose (TID) induced threshold voltage (V th ) shifts in Commercial-Off-The-Shelf (COTS) semiconductor devices and to develop physics-informed TID compact models. This versatile approach is applied to model the TID effect in an exemplar COTS 3.3 kV SiC power MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor). With the Charon-Dakota coupling, we can determine key device geometry and doping values based on device physics, which are difficult to obtain or not available for COTS devices but important for TCAD simulation; additionally, we can efficiently generate thousands of simulation results in a large parameter space, which makes it possible to develop data-driven surrogate models and perform Bayesian calibration. Utilizing the full tool-coupling approach, we achieve calibrated TCAD simulation models that accurately capture the average TID-induced V th shifts behavior with total doses and V th shifts saturation at high doses as observed in experimental data. More importantly, the calibrated TCAD simulations are obtained with determined TID model parameters (e.g., hole trap density and capture cross section) values that contain well quantified uncertainties. Furthermore, we can isolate and quantify the noises that are not captured by the TCAD models but exist in the measured data due to measurements and devices variabilities. Lastly, the calibrated surrogate models are used to develop physics-informed TID compact models. The method is generalizable to other devices and/or radiation conditions with few modifications and can provide well-determined uncertainties.

COTS↗

Lineage frequency time series reveal elevated levels of genetic drift in SARS-CoV-2 transmission in England

Genetic drift in infectious disease transmission results from randomness of transmission and host recovery or death. The strength of genetic drift for SARS-CoV-2 transmission is expected to be high due to high levels of superspreading, and this is expected to substantially impact disease epidemiology and evolution. However, we don’t yet have an understanding of how genetic drift changes over time or across locations. Furthermore, noise that results from data collection can potentially confound estimates of genetic drift. To address this challenge, we develop and validate a method to jointly infer genetic drift and measurement noise from time-series lineage frequency data. Our method is highly scalable to increasingly large genomic datasets, which overcomes a limitation in commonly used phylogenetic methods. We apply this method to over 490,000 SARS-CoV-2 genomic sequences from England collected between March 2020 and December 2021 by the COVID-19 Genomics UK (COG-UK) consortium and separately infer the strength of genetic drift for pre-B.1.177, B.1.177, Alpha, and Delta. We find that even after correcting for measurement noise, the strength of genetic drift is consistently, throughout time, higher than that expected from the observed number of COVID-19 positive individuals in England by 1 to 3 orders of magnitude, which cannot be explained by literature values of superspreading. Our estimates of genetic drift suggest low and time-varying establishment probabilities for new mutations, inform the parametrization of SARS-CoV-2 evolutionary models, and motivate future studies of the potential mechanisms for increased stochasticity in this system.

60 APPLIED LIFE SCIENCES↗

Modeling the dark current histogram induced by gold contamination in complementary-metal-oxide-semiconductor image sensors

We propose a model for dark current induced by metallic contamination in a CMOS image sensor. Based on Shockley-Read-Hall kinetics, the expression of dark current proposed accounts for the electric field enhanced emission factor due to the Poole-Frenkel barrier lowering and phonon-assisted tunneling mechanisms. To that aim, we considered the distribution of the electric field magnitude and metal atoms in the depth of the pixel. Poisson statistics were used to estimate the random distribution of metal atoms in each pixel for a given contamination dose. Then, we performed a Monte-Carlo-based simulation for each pixel to set the number of metal atoms the pixel contained and the enhancement factor each atom underwent, and obtained a histogram of the number of pixels versus dark current for the full sensor. Excellent agreement with the dark current histogram measured on an ion-implanted gold-contaminated imager has been achieved, in particular, for the description of the distribution tails due to the pixel regions in which the contaminant atoms undergo a large electric field. The agreement remains very good when increasing the temperature by 15 °C. We demonstrated that the amplification of the dark current generated for the typical electric fields encountered in the CMOS image sensors, which depends on the nature of the metal contaminant, may become very large at high electric field. The electron and hole emissions and the resulting enhancement factor are described as a function of the trap characteristics, electric field, and temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Final Technical Report for Award SC0008613

Discovering how aerosol particles, present in the atmosphere in sizes of a few nanometers to hundred micrometers, initiate ice crystal formation represents a great challenge. Atmospheric ice nucleation is important because ice crystals alter the radiative properties of clouds and thus climate, and impact precipitation and thus the hydrological cycle. The difficulty in predicting atmospheric ice formation is attributable at least in part, to the diversity of ice nucleation pathways, the physical and chemical complexity of the ice nucleating particles (INPs), and the relatively small numbers of INPs (compared with all other aerosol particles), sometimes less than one in 100000. These factors in turn makes constraining ice nucleation parameterizations for modeling applications challenging. The majority of airborne particles are known to be organic in nature or contain organic biogenic material. The presence of organic material adds to the complexity of the particles and therefore the predictability of ice nucleation events since the organic species can display different phase states, e.g. liquid or solid, in response to temperature and humidity. The award DE-SC0008613 to PI Prof. Daniel Knopf at Stony Brook University, “Relating the Chemical and Physical Properties of Aerosols to the Water Uptake and Ice Nucleation Potential of Particles Collected During the Carbonaceous Aerosols and Radiative Effects Study (CARES)”, allowed examination of laboratory generated aerosol particles and field-collected particles for their propensity to nucleate ice under typical tropospheric conditions and relate ice nucleation to the physicochemical properties of the particles including their morphology and chemical composition. This in turn allowed for development of ice nucleation parameterizations for implementation in cloud models. The award resulted in 10 peer-reviewed publications and more than 20 seminar and conference presentations. We demonstrated that the rate of immersion freezing, when a particle immersed in an aqueous droplet acts as an ice nucleus (IN), can be predicted by knowledge of the IN particle type present and the droplet’s water activity which is equal to ambient relative humidity. Our water activity based immersion freezing model is successful in predicting freezing data including INPs such as mineral dusts, marine biological material, organic species, and surfactant molecules. Its mathematical simplicity makes it an ideal candidate for implementation in cloud and climate models. Furthermore, we could show that this model can reproduce many past laboratory measurements which were generated using a variety of instruments to study immersion freezing. Lastly, we have demonstrated that this model can also be applied to field collected particles. Currently, this novel physical parameterization of immersion freezing is being implemented in a cloud model. We examined the physicochemical properties and the ice nucleation potential of particles collected during CARES applying a novel experimental method that allows identification of the individual INPs within a large population of particles sampled from an ambient environment. Taking advantage of a variety of micro-spectroscopic techniques, we characterized the composition and morphology of IN and non-IN particles present in the airborne population. We developed a new parameterization for quantifying the mixing state of the entire aerosol populations by introducing a mixing state index. We found that the identified INPs belong to the most common particle-type classes observed in the CARES field samples and as such are not special or rare particles. In other words, the INPs can be shown not to be unique in contrast to the common paradigm of being rare and exceptional. Either there are differences between particles acting as IN and particles not acting as IN which are beyond our current detection limit or nucleation occurs randomly on the surface of any one of these compositionally equivalent particles. These results suggest that total particle surface area of the different particle types present in the aerosol population is also a crucial factor when predicting ice nucleation in an air mass. We also observed that ambient organic aerosol particles can initiate ice nucleation and corroborated these findings using laboratory generated organic particles. These experiments demonstrated that information of the organic phase state is important for predicting the ice nucleation pathway and the ability of an organic particle to participate in atmospheric ice crystal formation. This award resulted in substantial new insights in the processes governing immersion freezing, the role of organic aerosol particles in ice cloud formation, and the importance of the ambient aerosol population for prediction of ice nucleation in an air parcel. These findings have significant implications for modeling and field measurement strategies of atmospheric ice nucleation.

54 ENVIRONMENTAL SCIENCES↗

X-RAY NONLINEAR OPTICAL PROCESSES IN ATOMS USING A SELF-AMPLIFIED SPONTANEOUS EMISSION FREE-ELECTRON LASER

X-ray free electron lasers (xFEL) will open new avenues to the virtually unexplored territory of non-linear interactions of x rays with matter. Initially xFELs will be based on the principle of self-amplified spontaneous emission (SASE). Each SASE pulse consists of a number of coherent intensity spikes of random amplitude, i.e. the process is chaotic and pulses are irreproducible. The coherence time of SASE xFELs will be a few femtoseconds for a photon energy near 1 keV. The importance of coherence properties of light in non-linear optical processes was theoretically discovered in the early 1960s. In this contribution we will illustrate the impact of field chaoticity on x-ray non-linear optical processes on neon for photon energies around 1 keV and intensities up to 10{sup 18} W/cm{sup 2}. Resonant and non-resonant processes are discussed. The first process to be addressed is the formation of a double-core hole in neon by photoionization with x rays above 1.25 keV energy. In contrast to the long-wavelength regime, non-linear optical processes in the x-ray regime are characterized in general by sequential single-photon single-electron interactions. Despite this fact, the sequential absorption of multiple x-ray photons depends on the statistical properties of the radiation field. Treating the x rays generated by a SASE FEL as fully chaotic, a quantum-mechanical analysis of inner-shell two-photon absorption is performed. By solving a system of time-dependent rate equations, we demonstrate that double-core hole formation in neon via x-ray two-photon absorption is enhanced by chaotic photon statistics. At an intensity of 10{sup 16} W/cm{sup 2}, the statistical enhancement is about 30%, much smaller than typical values in the optical regime. The second part of this presentation discusses the resonant Auger effect of atomic neon at the 1s-3p transition (at 867.1 eV). For low X-ray intensity, the excitation process 1s {yields} 3p in Neon can be treated perturbatively. The core-hole excited 1s{sup -1} 3p state is embedded in the continuum and decays via Auger-process on the timescale of approximately 5 fs. Increasing the x-ray intensity above 1.5 x 10{sup 18} W/cm{sup 2}, a peak intensity accessible with xFEL sources in the near future, x-ray induced emission from 3p back to 1s becomes possible, i.e. Rabi oscillations between these two levels can be induced. For the numerical analysis of this process, an effective two-level model, including a description of the resonant Auger decay process, is employed. The observation of x-ray-driven atomic populations dynamics in the time domain is challenging for chaotic xFEL pulses. In addition to requiring single-shot measurements, sub-femtosecond temporal resolution would be needed. The Rabi oscillations will, however, be imprinted on the kinetic energy distribution of the resonant Auger electron (see Fig. 1). Measuring the resonant Auger-electron line profile will provide information on both atomic population dynamics and x-ray pulse properties.

74 ATOMIC AND MOLECULAR PHYSICS↗

KINETIC MONTE CARLO STUDIES OF H{sub 2} FORMATION ON GRAIN SURFACES OVER A WIDE TEMPERATURE RANGE

We have used the continuous-time random-walk Monte Carlo technique to study the formation of H{sub 2} from two hydrogen atoms on the surface of interstellar dust grains with both physisorption and chemisorption sites on olivine and carbonaceous material. In our standard approach, atoms must first enter the physisorption site before chemisorption can occur. We have considered hydrogen atom mobility due to both thermal hopping and quantum mechanical tunneling. The temperature range between 5 K and 825 K has been explored for different incoming H fluxes representative of interstellar environments with atomic hydrogen number density ranging between 0.1 cm{sup -3} and 100 cm{sup -3} and dust grain sizes ranging from 100 sites to 10{sup 6} sites, the latter corresponding roughly to olivine grains of radius 0.2 {mu}m. In addition, we have also considered rough surfaces with multiple binding sites. Tunneling is found to dominate the surface chemistry at low temperature, but as the temperature increases, the scenario changes. The inclusion of chemisorption sites can provide a meaningful efficiency for H{sub 2} production up to temperatures as high as 700 K depending upon the depth of the chemisorption well. We found that over virtually the entire temperature range studied, the use of rate equations overestimates the H{sub 2} formation rate to some extent. This overestimate is large at high temperatures, due to very low surface residence times. We have also considered models in which chemisorption sites are entered directly and diffusion proceeds only to other chemisorption sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗