Search NASA⌕ Search

SEARCH · Search NASA

Results for “SOUND VELOCITY - MEASUEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

SLOW MAGNETOACOUSTIC WAVES IN TWO-RIBBON FLARES

We demonstrate that disturbances observed to propagate along the axis of the arcade in two-ribbon solar flares at the speed of a few tens of km s{sup -1}, well below the Alfven and sound speeds, can be interpreted in terms of slow magnetoacoustic waves. The waves can propagate across the magnetic field, parallel to the magnetic neutral line, because of the wave-guiding effect due to the reflection from the footpoints. The perpendicular group speed of the perturbation is found to be a fraction of the sound speed, which is consistent with observations. The highest value of the group speed grows with the increase in the ratio of the sound and Alfven speeds. For a broad range of parameters, the highest value of the group speed corresponds to the propagation angle of 25 deg. - 28 deg. to the magnetic field. This effect can explain the temporal and spatial structure of quasi-periodic pulsations observed in two-ribbon flares.

79 ASTRONOMY AND ASTROPHYSICS↗

Jet Noise Physics and Modeling Using First-principles Simulations

An extensive analysis of our jet DNS database has provided for the first time the complex correlations that are the core of many statistical jet noise models, including MGBK. We have also for the first time explicitly computed the noise from different components of a commonly used noise source as proposed in many modeling approaches. Key findings are: (1) While two-point (space and time) velocity statistics are well-fitted by decaying exponentials, even for our low-Reynolds-number jet, spatially integrated fourth-order space/retarded-time correlations, which constitute the noise "source" in MGBK, are instead well-fitted by Gaussians. The width of these Gaussians depends (by a factor of 2) on which components are considered. This is counter to current modeling practice, (2) A standard decomposition of the Lighthill source is shown by direct evaluation to be somewhat artificial since the noise from these nominally separate components is in fact highly correlated. We anticipate that the same will be the case for the Lilley source, and (3) The far-field sound is computed in a way that explicitly includes all quadrupole cancellations, yet evaluating the Lighthill integral for only a small part of the jet yields a far-field noise far louder than that from the whole jet due to missing nonquadrupole cancellations. Details of this study are discussed in a draft of a paper included as appendix A.

Freund, Jonathan B.↗

Numerical Simulation of the Generation of Axisymmetric Mode Jet Screech Tones

An imperfectly expanded supersonic jet, invariably, radiates both broadband noise and discrete frequency sound called screech tones. Screech tones are known to be generated by a feedback loop driven by the large scale instability waves of the jet flow. Inside the jet plume is a quasi-periodic shock cell structure. The interaction of the instability waves and the shock cell structure, as the former propagates through the latter, is responsible for the generation of the tones. Presently, there are formulas that can predict the tone frequency fairly accurately. However, there is no known way to predict the screech tone intensity. In this work, the screech phenomenon of an axisymmetric jet at low supersonic Mach number is reproduced by numerical simulation. The computed mean velocity profiles and the shock cell pressure distribution of the jet are found to be in good agreement with experimental measurements. The same is true with the simulated screech frequency. Calculated screech tone intensity and directivity at selected jet Mach number are reported in this paper. The present results demonstrate that numerical simulation using computational aeroacoustics methods offers not only a reliable way to determine the screech tone intensity and directivity but also an opportunity to study the physics and detailed mechanisms of the phenomenon by an entirely new approach.

Shen, Hao↗

Direct Observation of Acoustic Oscillations in InAs Nanowires

Time-resolved X-ray diffraction and optical reflectivity are used to directly measure three different acoustic oscillations of InAs nanowires. The oscillations are excited by a femtosecond laser pulse and evolve at three different time scales. We measure the absolute scale of the initial radial expansion of the fundamental breathing eigenmode and determine the frequency by transient optical reflectivity. For the extensional eigenmode we measure the oscillations of the average radial and axial lattice constants and determine the amplitude of oscillations and the average extension. Finally we observe a bending motion of the nanowires. The frequencies of the eigenmodes are in good agreements with predictions made by continuum elasticity theory and we find no difference in the speed of sound between the wurtzite nanowires and cubic bulk crystals, but the measured strain is influenced by the interaction between different modes. The wurtzite crystal structure of the nanowires however has an anisotropic thermal expansion.

36 MATERIALS SCIENCE↗

Response of High Subsonic Jet to Nonaxisymmetric Disturbances

A model of sound generated in a high subsonic (Mach 0.9) circular jet is solved numerically in cylindrical coordinates for nonaxisymmetric disturbances. The jet is excited by transient mass injection by a finite duration pulse via a modulated ring source. The nonaxisymmetric solution is computed for long times after the initial disturbance has exited the computational domain. The long time behavior of the jet is dominated by vorticity and pressure disturbances generated at the nozzle lip and growing as they convect down-stream in the jet. These disturbances generate sound as they propagate. The primary non-axisymmetric effect that we simulate is that of a flapping mode where regions of high and low pressure alternate on opposite sides of the jet. The predominant feature of this mode is the appearance of relatively large deviations of the pressure from the ambient pressure on opposite sides of the jet and the convection of these regions downstream. We illustrate flow field, near field and far field data. Important nonaxisymmetric characteristics of the near and flow field disturbances include roughly periodic pressure elevations and depressions at opposite values of the azimuthal angle psi. These correspond to pressure disturbances propagating in the axial direction. The azimuthal velocity exhibits a sinusoidal dependence on psi with similar roughly periodic disturbances. For every azimuthal angle psi, the jet radiation peaks about 30 deg. from the jet axis, however there is now a pronounced dependence of the far field radiation pattern on psi.

Bayliss, A.↗

Interstellar clouds in high-speed, supersonic flows: Two-dimensional simulations

We present a series of gasdynamical simulations of the interaction of a dense, cool interstellar cloud with a high-speed, supersonic wind that confines and accelerates the embedded cloud. Our goal is to attempt to determine if such clouds can survive various potentially disruptive instabilities, that occur at their peripheries, long enough to be accelerated to speeds which are comparable to the wind velocity. These simulations are performed using two-dimensional, Eulerian gas dynamics on both an axisymmetric (about the cloud axis) and 'slab' geometric grid. The spatial and temporal resolutions of the simulations are varied over a wide range to investigate the effects of small-scale instabilities on the overall acceleration of clouds and the development of large-scale, disruptive instabilities. Also, we study the effects of wind/cloud Mach number variations by changing the wind speed constant at about 12 km/s (which corresponds to a cloud temperature of 10,000 K). The current simulations track the evolution of clouds as they are accelerated to speeds approximately 4-5 times greater than their internal sound speeds. Furthermore, the models with the highest resolution were extended far beyond quasi-linear Rayleigh-Taylor growth times reaching 6-7 Rayleigh-Taylor growth times for the largest scale instabilities before being terminated because of the accumulation of errors at the rear grid boundary.

Schiano, A. V. R.↗

Comparison of Two Acoustic Waveguide Methods for Determining Liner Impedance

Acoustic measurements taken in a flow impedance tube are used to assess the relative accuracy of two waveguide methods for impedance eduction in the presence of grazing flow. The aeroacoustic environment is assumed to contain forward and backward-traveling acoustic waves, consisting of multiple modes, and uniform mean flow. Both methods require a measurement of the complex acoustic pressure profile over the length of the test liner. The Single Mode Method assumes that the sound pressure level and phase decay-rates of a single progressive mode can be extracted from this measured complex acoustic pressure profile. No a priori assumptions are made in the Finite Element. Method regarding the modal or reflection content in the measured acoustic pressure profile. The integrity of each method is initially demonstrated by how well their no-flow impedances match those acquired in a normal incidence impedance tube. These tests were conducted using ceramic tubular and conventional perforate liners. Ceramic tubular liners were included because of their impedance insensitivity to mean flow effects. Conversely, the conventional perforate liner was included because its impedance is known to be sensitive to mean flow velocity effects. Excellent comparisons between impedance values educed with the two waveguide methods in the absence of mean flow and the corresponding values educed with the normal incident impedance tube were observed. The two methods are then compared for mean flow Mach numbers up to 0.5, and are shown to give consistent results for both types of test liners. The quality of the results indicates that the Single Mode Method should be used when the measured acoustic pressure profile is clearly dominated by a single progressive mode, and the Finite Element Method should be used for all other cases.

Jones, Michael G.↗

Control of Combustion-Instabilities Through Various Passive Devices

It is well known that under some operating conditions, rocket engines (using solid or liquid fuels) exhibit unstable modes of operation that can lead to engine malfunction and shutdown. The sources of these instabilities are diverse and are dependent on fuel, chamber geometry and various upstream sources such as pumps, valves and injection mechanism. It is believed that combustion-acoustic instabilities occur when the acoustic energy increase due to the unsteady heat release of the flame is greater than the losses of acoustic energy from the system [1, 2]. Giammar and Putnam [3] performed a comprehensive study of noise generated by gasfired industrial burners and made several key observations; flow noise was sometimes more intense than combustion roar, which tended to have a characteristic frequency spectrum. Turbulence was amplified by the flame. The noise power varied directly with combustion intensity and also with the product of pressure drop and heat release rate. Karchmer [4] correlated the noise emitted from a turbofan jet engine with that in the combustion chamber. This is important, since it quantified how much of the noise from an engine originates in the combustor. A physical interpretation of the interchange of energy between sound waves and unsteady heat release rates was given by Rayleigh [5] for inviscid, linear perturbations. Bloxidge et al [6] extended Rayleigh s criterion to describe the interaction of unsteady combustion with one-dimensional acoustic waves in a duct. Solutions to the mass, momentum and energy conservation equations in the pre- and post-flame zones were matched by making several assumptions about the combustion process. They concluded that changes in boundary conditions affect the energy balance of acoustic waves in the combustor. Abouseif et al [7] also solved the one-dimensional flow equations, but they used a onestep reaction to evaluate the unsteady heat release rate by relating it to temperature and velocity perturbations. Their analysis showed that oscillations arise from coupling between entropy waves produced at the flame and pressure waves originating from the nozzle. Yang and Culick [8] assumed a thin flame sheet, which is distorted by velocity and pressure oscillations. Conservation equations were expressed in integral form and solutions for the acoustic wave equations and complex frequencies were obtained. The imaginary part of the frequency indicated stability regions of the flame. Activation energy asymptotics together with a one-step reaction were used by McIntosh [9] to study the effects of acoustic forcing and feedback on unsteady, one-dimensional flames. He found that the flame stability was altered by the upstream acoustic feedback. Shyy et al [10] used a high-accuracy TVD scheme to simulate unsteady, one-dimensional longitudinal, combustion instabilities. However, numerical diffusion was not completely eliminated. Recently, Prasad [11] investigated numerically the interactions of pressure perturbations with premixed flames. He used complex chemistry to study responses of pressure perturbations in one-dimensional combustors. His results indicated that reflected and transmitted waves differed significantly from incident waves.

Frendi, Kader↗

Acoustic characteristics of a large upper-surface blown configuration with turbofan engines

This paper presents acoustic results from static and simulated low forward velocity tests of a large-scale model of an aircraft configuration with two turbofan engines in the full-scale tunnel at the Langley Research Center. The turbofan engines were integrated into the model and equipped with rectangular nozzles to provide the upper-surface blowing. Results indicate that the upper-surface-blowing noise problem can be characterized, primarily, by the unsymmetrical radiation pattern due mainly to shielding of the high-frequency engine noise and the production of low-frequency noise by jet-surface interaction. The directivity of the low-frequency noise was found to depend on the trailing-edge flap angle when the thrust levels were low. Normalized sound pressure level spectral density data showed good agreement at low Strouhal number with other small- and large-scale model data from tests using simulated wing-flap systems. Forward speed effects were undetectable at the low tunnel speeds used during the tests.

Preisser, J. S.↗

Dust kinetic Alfven and acoustic waves in a Lorentzian plasma

Dust kinetic Alfven waves (DKAWs) with finite Larmor radius effects have been examined rigorously in a uniform dusty plasma in the presence of an external magnetic field. A dispersion relation of low-frequency DKAW on the dust acoustic velocity branch is obtained in a low-{beta} Lorentzian plasma. It is found that the influence of the Lorentzian distribution function is more effective for perpendicular component of group velocity as compared with parallel one. Lorentzian-type charging currents are obtained with the aid of Vlasov theory. Damping/instability due to dust charge fluctuation is found to be insensitive with the form of distribution function for DKAW. The possible applications to dusty space plasmas are pointed out.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

B-modes and the nature of inflation

Observations of the cosmic microwave background do not yet determine whether inflation was driven by a slowly-rolling scalar field or involved another physical mechanism. In this paper we discuss the prospects of using the power spectra of scalar and tensor modes to probe the nature of inflation. We focus on the leading modification to the slow-roll dynamics, which entails a sound speed c{sub s} for the scalar fluctuations. We derive analytically a lower bound on c{sub s} in terms of a given tensor-to-scalar ratio r, taking into account the difference in the freeze-out times between the scalar and tensor modes. We find that any detection of primordial B-modes with r > 0.01 implies a lower bound on c{sub s} that is stronger than the bound derived from the absence of non-Gaussianity in the Planck data. For r ∼> 0.1, the bound would be tantalizingly close to a critical value for the sound speed, (c{sub s}){sub *} = 0.47 (corresponding to (f{sub NL}{sup equil}){sub *} = -0.93), which we show serves as a threshold for non-trivial dynamics beyond slow-roll. We also discuss how an order-one level of equilateral non-Gaussianity is a natural observational target for other extensions of the canonical paradigm.

79 ASTRONOMY AND ASTROPHYSICS↗

Ultraintense laser interaction with nanoscale target: a simple model for layer expansion and ion acceleration

A simple model has been derived for the expansion of a thin (up to 100s of nm thickness), solid-density target driven by an u.ltraintense laser. In this regime, new ion acceleration mechanisms, such as the Break-Out Afterburner (BOA) [1], emerge with the potential to dramatically improve energy, efficiency, and energy spread of laser-driven ion beams. Such beams have been proposed [2] as drivers for fast ignition inertial confinement fusion [3]. Analysis of kinetic simulations of the BOA shows two dislinct times that bound the period of enhanced acceleration: t{sub 1}, when the target becomes relativistically transparent to the laser, and t{sub 2}, when the target becomes classically underdense and the enhanced acceleration terminates. A silllple dynamical model for target expansion has been derived that contains both the early, one-dimensional (lD) expansion of the target as well as three-dimensional (3D) expansion of the plasma at late times, The model assumes that expansion is slab-like at the instantaneous ion sound speed and requires as input target composition, laser intensity, laser spot area, and the efficiency of laser absorption into electron thermal energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ALFVÉN WAVE HEATING OF THE SOLAR CHROMOSPHERE: 1.5D MODELS

Physical processes that may lead to solar chromospheric heating are analyzed using high-resolution 1.5D non-ideal MHD modeling. We demonstrate that it is possible to heat the chromospheric plasma by direct resistive dissipation of high-frequency Alfvén waves through Pedersen resistivity. However, this is unlikely to be sufficient to balance radiative and conductive losses unless unrealistic field strengths or photospheric velocities are used. The precise heating profile is determined by the input driving spectrum, since in 1.5D there is no possibility of Alfvén wave turbulence. The inclusion of the Hall term does not affect the heating rates. If plasma compressibility is taken into account, shocks are produced through the ponderomotive coupling of Alfvén waves to slow modes and shock heating dominates the resistive dissipation. In 1.5D shock coalescence amplifies the effects of shocks, and for compressible simulations with realistic driver spectra, the heating rate exceeds that required to match radiative and conductive losses. Thus, while the heating rates for these 1.5D simulations are an overestimate, they do show that ponderomotive coupling of Alfvén waves to sound waves is more important in chromospheric heating than Pedersen dissipation through ion–neutral collisions.

79 ASTRONOMY AND ASTROPHYSICS↗

Spreading dynamics of a partially wetting water film atop a MHz substrate vibration

A MHz vibration, or an acoustic wave, propagating in a solid substrate may support the convective spreading of a liquid film. Previous studies uncovered this ability for fully wetting silicon oil films under the excitation of a MHz Rayleigh surface acoustic wave (SAW), propagating in a lithium niobate substrate. Partially wetting de-ionized water films, however, appeared immune to this spreading mechanism. Here, we use both theory and experiment to reconsider this situation and show partially wetting water films may spread under the influence of a propagating MHz vibration. We demonstrate distinct capillary and convective (vibrational/acoustic) spreading regimes that are governed by a balance between convective and capillary mechanisms, manifested in the non-dimensional number θ{sup 3}/We, where θ is the three phase contact angle of the liquid with the solid substrate and We ≡ ρU{sup 2}H/γ; ρ, γ, H, and U are the liquid density, liquid/vapour surface tension, characteristic film thickness, and the characteristic velocity amplitude of the propagating vibration on the solid surface, respectively. Our main finding is that the vibration will support a continuous spreading motion of the liquid film out of a large reservoir if the convective mechanism prevails (θ{sup 3}/We < 1); otherwise (θ{sup 3}/We > 1), the dynamics of the film is governed by the capillary mechanism.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Influence of the Configuration and Material of Interdigital Transducers on the Excitation of Surface and Pseudosurface Acoustic Waves in Lithium Niobate Substrates

We have studied the excitation, propagation, and interaction of surface and pseudosurface acoustic waves in X-cut lithium niobate substrate. Resonance excitation frequencies, propagation velocities, and dispersion characteristics for the acoustic waves of each type are determined. It is established that the electrode material influences the efficiency of excitation and interaction between the acoustic waves of various types. Requirements for the material and configuration of electrodes in integrated acousto-optic devices are determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of dry large‐scale vertical motions on initial MJO convective onset

Abstract Anomalies of eastward propagating large‐scale vertical motion with ~30 day variability at Addu City, Maldives, move into the Indian Ocean from the west and are implicated in Madden‐Julian Oscillation (MJO) convective onset. Using ground‐based radar and large‐scale forcing data derived from a sounding array, typical profiles of environmental heating, moisture sink, vertical motion, moisture advection, and Eulerian moisture tendency are computed for periods prior to those during which deep convection is prevalent and those during which moderately deep cumulonimbi do not form into deep clouds. Convection with 3–7 km tops is ubiquitous but present in greater numbers when tropospheric moistening occurs below 600 hPa. Vertical eddy convergence of moisture in shallow to moderately deep clouds is likely responsible for moistening during a 3–7 day long transition period between suppressed and active MJO conditions, although moistening via evaporation of cloud condensate detrained into the environment of such clouds may also be important. Reduction in large‐scale subsidence, associated with a vertical velocity structure that travels with a dry eastward propagating zonal wavenumbers 1–1.5 structure in zonal wind, drives a steepening of the lapse rate below 700 hPa, which supports an increase in moderately deep moist convection. As the moderately deep cumulonimbi moisten the lower troposphere, more deep convection develops, which itself moistens the upper troposphere. Reduction in large‐scale subsidence associated with the eastward propagating feature reinforces the upper tropospheric moistening, helping to then rapidly make the environment conducive to formation of large stratiform precipitation regions, whose heating is critical for MJO maintenance.

Powell, Scott W.↗

General formulation for acoustic solitons in three-component nonthermal plasmas

A generalized formulation is developed for nonlinear acoustic solitons in three-component such as dust-ion-electron and electron-positron-ion plasmas with the charge of each species being unspecified. The heavy, cold charged particles (ions or dust particles) are treated as a fluid while the light, hot components are described by the kinetic Vlasov equation with separate velocity distributions which can be of {kappa} function or highly nonthermal (non-monotonic) distributions. The model is also applicable for two-component such as ion-electron plasmas with two different temperatures for electrons. The generalized dispersion relation for acoustic waves and the Korteweg-de Vries equations as well as the Sagdeev potential are derived for various models with different combinations of velocity distributions. The parameter regimes for the existence of acoustic solitons are analyzed and examples of nonlinear solutions are illustrated. The polarity of electric potential is found to exhibit anomaly for highly nonthermal cases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron distribution function behavior during localized transverse ion acceleration events in the topside auroral zone

The Topaz3 auroral sounding rocket made the following observations concerning the transfer of precipitating auroral electron energy to transverse ion acceleration in the topside auroral zone. During the course of the flight, the precipitating electron beam was modified to varying degrees by interaction with VLF hiss, at times changing the beam into a field-aligned plateau. The electron distribution functions throughout the flight are classified according to the extent of this modification, and correspondences with ion acceleration events are sought. The hiss power during most of this rocket flight apparently exceeded the threshold for collapse into solitary structures. At the times of plateaued electron distributions, the collapse of these structures was limited by Landau damping through the ambient ions, resulting in a velocity-dependent acceleration of both protons and oxygen. This initial acceleration is sufficient to supply the number flux of upflowing ions observed at satellite altitudes. The bursty ion acceleration was anticorrelated, on 1-s or smaller timescales, with dispersive bursts of precipitating field-aligned electrons, although on longer timescales the bursty ions and the bursty electrons are correlated.

Lynch, K. A.↗