Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRESS CALCULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Evaluation of DUSTRAN Software System for Modeling Chloride Deposition on Steel Canisters

The degradation of steel by stress corrosion cracking (SCC) when exposed to atmospheric conditions for decades is a significant challenge in the fossil fuel and nuclear industries. SCC can occur when corrosive contaminants such as chlorides are deposited on a susceptible material in a tensile stress state. The Nuclear Regulatory Commission has identified chloride-induced SCC as a potential cause for concern in stainless steel used nuclear fuel (UNF) canisters in dry storage. The modeling of contaminant deposition is the first step in predictive multiscale modeling of SCC that is essential to develop mitigation strategies, prioritize inspection, and ensure the integrity and performance of canisters, pipelines, and structural materials. A multiscale simulation approach can be developed to determine the likelihood that a canister would undergo SCC in a certain period of time. This study investigates the potential of DUSTRAN, a dust dispersion modeling system developed by Pacific Northwest National Laboratory, to model the deposition of chloride contaminants from sea salt aerosols on a steel canister. Results from DUSTRAN simulations run with historical meteorological data were compared against measured chloride data at a coastal site in Maine. DUSTRAN’s CALPUFF model tended to simulate concentrations higher than those measured; however, the closest estimations were within the same order of magnitude as the measured values. The decrease in discrepancies between measured and simulated values as the level of abstraction in wind speed decreased suggest that the model is very sensitive to wind speed. However, the influence of other parameters such as the distinction between open-ocean and surf-zone sources needs to be explored further. Deposition values predicted by the DUSTRAN system were not in agreement with concentration values and suggest that the deposition calculations may not fully represent physical processes. Overall, results indicate that with parameter refinement, DUSTRAN has the potential to simulate atmospheric chloride dispersion on steel canisters.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

ON ESTIMATING FORCE-FREENESS BASED ON OBSERVED MAGNETOGRAMS

It is a common practice in the solar physics community to test whether or not measured photospheric or chromospheric vector magnetograms are force-free, using the Maxwell stress as a measure. Some previous studies have suggested that magnetic fields of active regions in the solar chromosphere are close to being force-free whereas there is no consistency among previous studies on whether magnetic fields of active regions in the solar photosphere are force-free or not. Here we use three kinds of representative magnetic fields (analytical force-free solutions, modeled solar-like force-free fields, and observed non-force-free fields) to discuss how measurement issues such as limited field of view (FOV), instrument sensitivity, and measurement error could affect the estimation of force-freeness based on observed magnetograms. Unlike previous studies that focus on discussing the effect of limited FOV or instrument sensitivity, our calculation shows that just measurement error alone can significantly influence the results of estimates of force-freeness, due to the fact that measurement errors in horizontal magnetic fields are usually ten times larger than those in vertical fields. This property of measurement errors, interacting with the particular form of a formula for estimating force-freeness, would result in wrong judgments of the force-freeness: a truly force-free field may be mistakenly estimated as being non-force-free and a truly non-force-free field may be estimated as being force-free. Our analysis calls for caution when interpreting estimates of force-freeness based on measured magnetograms, and also suggests that the true photospheric magnetic field may be further away from being force-free than it currently appears to be.

79 ASTRONOMY AND ASTROPHYSICS↗

Molecular Dynamics Simulation of Hygroscopic Aging Effects in Epoxy Polymer

The automobile industry is incorporating more lightweight content in car designs to boost fuel-economy. New structural adhesives are needed to mitigate the corrosion and thermal expansion issues associated with joining dissimilar lightweight materials, but adhesive developers lack a fundamental understanding of the chemistry that occurs in the adhesive as the joint ages. In this study, we developed structural adhesive molecular models and applied classical molecular dynamics simulations and density functional theory calculations to gain molecular insights into the influence of water molecules on the properties of epoxy-based adhesives (DGEBA + Jeffamine (JD230)). The simulations were complemented by experimental synthesis and characterization. Our work underscores the impact of water molecules on the local structure of the epoxy network as well as resulting mechanical properties. Water molecules were mainly coordinated with hydroxyls, primary amines and secondary amines, but also weakly coordinated with ether linkages, which were found most probable to be labile. Simulated stress–strain data indicates that increasing the water content deteriorates the mechanical properties. The Young’s modulus decreased by ~ 30% when the water content increased to 3 wt%. We conclude, this integration of molecular-level chemical insights with mechanical property simulations of the hydrated epoxy system and experimental validation holds the promise to advance lightweight joint technologies.

36 MATERIALS SCIENCE↗

Wellbore cement fracture evolution at the cement–basalt caprock interface during geologic carbon sequestration

Composite Portland cement-basalt caprock cores with fractures, as well as neat Portland cement columns, were prepared to understand the geochemical and geomechanical effects on the integrity of wellbores with defects during geologic carbon sequestration. The samples were reacted with CO2-saturated groundwater at 50 ºC and 10 MPa for 3 months under static conditions, while one cement-basalt core was subjected to mechanical stress at 2.7 MPa before the CO2 reaction. Micro-XRD and SEM-EDS data collected along the cement-basalt interface after 3-month reaction with CO2-saturated groundwater indicate that carbonation of cement matrix was extensive with the precipitation of calcite, aragonite, and vaterite, whereas the alteration of basalt caprock was minor. X-ray microtomography (XMT) provided three-dimensional (3-D) visualization of the opening and interconnection of cement fractures due to mechanical stress. Computational fluid dynamics (CFD) modeling further revealed that this stress led to the increase in fluid flow and hence permeability. After the CO2-reaction, XMT images displayed that calcium carbonate precipitation occurred extensively within the fractures in the cement matrix, but only partially along the fracture located at the cement-basalt interface. The 3-D visualization and CFD modeling also showed that the precipitation of calcium carbonate within the cement fractures after the CO2-reaction resulted in the disconnection of cement fractures and permeability decrease. The permeability calculated based on CFD modeling was in agreement with the experimentally determined permeability. This study demonstrates that XMT imaging coupled with CFD modeling represent a powerful tool to visualize and quantify fracture evolution and permeability change in geologic materials and to predict their behavior during geologic carbon sequestration or hydraulic fracturing for shale gas production and enhanced geothermal systems.

basalt↗

Structure-Controlled Oxygen Concentration in Fe 2 O 3 and FeO 2

Solid-solid reaction, particularly in the Fe-O binary system, has been extensively studied in the past decades because of its various applications in chemistry and materials and earth sciences. The recently synthesized pyrite-FeO 2 at high pressure suggested a novel oxygen-rich stoichiometry that extends the achievable O-Fe ratio in iron oxides by 33%. Although FeO 2 was synthesized from Fe 2 O 3 and O 2 , the underlying solid reaction mechanism remains unclear. Herein, combining in situ X-ray diffraction experiments and first-principles calculations, we identified that two competing phase transitions starting from Fe 2 O 3 : (1) without O 2 , perovskite-Fe2O3 transits to the post-perovskite structure above 50 GPa; (2) if free oxygen is present, O diffuses into the perovskite-type lattice of Fe 2 O 3 leading to the pyritetype FeO 2 phase. We found the O-O bonds in FeO 2 are formed by the insertion of oxygen into the Pv lattice via the external stress and such O-O bonding is only kinetically stable under high pressure. This may provide a general mechanism of adding extra oxygen to previous known O saturated oxides to produce unconventional stoichiometries. Our results also shed light on how O is enriched in mantle minerals under pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlling the defects and transition layer in SiO 2 films grown on 4 H -SiC via direct plasma-assisted oxidation

The structural stability and electrical performance of SiO 2 grown on SiC via direct plasma-assisted oxidation were investigated. To investigate the changes in the electronic structure and electrical characteristics caused by the interfacial reaction between the SiO 2 film (thickness ~ 5 nm) and SiC, X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), density functional theory (DFT) calculations, and electrical measurements were performed. The SiO 2 films grown via direct plasma-assisted oxidation at room temperature for 300s exhibited significantly decreased concentrations of silicon oxycarbides (SiO x C y ) in the transition layer compared to that of conventionally grown (i.e., thermally grown) SiO 2 films. Moreover, the plasma-assisted SiO 2 films exhibited enhanced electrical characteristics, such as reduced frequency dispersion, hysteresis, and interface trap density ( D it ≈ 10 11 cm -2 · eV -1 ). In particular, stress induced leakage current (SILC) characteristics showed that the generation of defect states can be dramatically suppressed in metal oxide semiconductor (MOS) structures with plasma-assisted oxide layer due to the formation of stable Si-O bonds and the reduced concentrations of SiO x C y species defect states in the transition layer. That is, energetically stable interfacial states of high quality SiO 2 on SiC can be obtained by the controlling the formation of SiO x C y through the highly reactive direct plasma-assisted oxidation process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

GYROSCOPIC PUMPING OF LARGE-SCALE FLOWS IN STELLAR INTERIORS AND APPLICATION TO LITHIUM-DIP STARS

The maintenance of large-scale differential rotation in stellar convective regions by rotationally influenced convective stresses also drives large-scale meridional flows by angular-momentum conservation. This process is an example of 'gyroscopic pumping' and has recently been studied in detail in the solar context. An important question concerns the extent to which these gyroscopically pumped meridional flows penetrate into nearby stably stratified (radiative) regions, since they could potentially be an important source of non-local mixing. Here, we present an extensive study of the gyroscopic pumping mechanism, using a combination of analytical calculations and numerical simulations both in Cartesian geometry and in spherical geometry. The various methods, when compared with one another, provide physical insight into the process itself, as well as increasingly sophisticated means of estimating the gyroscopic pumping rate. As an example of application, we investigate the effects of this large-scale mixing process on the surface abundances of the light elements Li and Be for stars in the mass range 1.3-1.5 M {sub sun} (the so-called Li-dip stars). We find that gyroscopic pumping is a very efficient mechanism for circulating material between the surface and the deep interior, so much in fact that it overestimates Li and Be depletion by orders of magnitude for stars on the hot side of the dip. However, when the diffusion of chemical species back into the surface convection zone is taken into account, a good fit with observed surface abundances of Li and Be as a function of stellar mass in the Hyades cluster can be found for reasonable choices of model parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

RESISTIVITY-DRIVEN STATE CHANGES IN VERTICALLY STRATIFIED ACCRETION DISKS

We investigate the effect of shear viscosity, {nu}, and Ohmic resistivity, {eta}, on the magnetorotational instability (MRI) in vertically stratified accretion disks through a series of local simulations with the Athena code. First, we use a series of unstratified simulations to calibrate physical dissipation as a function of resolution and background field strength; the effect of the magnetic Prandtl number, P{sub m} = {nu}/{eta}, on the turbulence is captured by {approx}32 grid zones per disk scale height, H. In agreement with previous results, our stratified disk calculations are characterized by a subthermal, predominately toroidal magnetic field that produces MRI-driven turbulence for |z| {approx}< 2H. Above |z| {approx} 2H, the magnetic pressure dominates and the field is buoyantly unstable. Large-scale radial and toroidal fields are also generated near the mid-plane and subsequently rise through the disk. The polarity of this mean field switches on a roughly 10 orbit period in a process that is well modeled by an {alpha}-{Omega} dynamo. Turbulent stress increases with P{sub m} but with a shallower dependence compared to unstratified simulations. For sufficiently large resistivity, {eta} {approx} c{sub s} H/1000, where c{sub s} is the sound speed, MRI turbulence within 2H of the mid-plane undergoes periods of resistive decay followed by regrowth. This regrowth is caused by amplification of the toroidal field via the dynamo. This process results in large amplitude variability in the stress on 10-100 orbital timescales, which may have relevance for partially ionized disks that are observed to have high- and low-accretion states.

79 ASTRONOMY AND ASTROPHYSICS↗

Reconstructing the heavy resonance at hadron colliders

We investigate the method for constructing the invariant mass using the M{sub T2}-assisted on-shell (MAOS) approximation to the invisible particle momenta in the cascade decays of a new particle resonance produced at hadron colliders. We note that the MAOS reconstruction can be defined in several different ways, while keeping the efficiency of approximation at a similar level, and one of them provides a unique solution for each event. It is shown that the invariant mass distribution constructed with the MAOS momenta exhibits a peak at the heavy resonance mass, regardless of the chosen MAOS scheme and the detailed mass spectrum of the particles in the cascade. We stress that the MAOS invariant mass can be used as a clean signal of new particle resonance produced at the Large Hadron Collider, as well as a model-independent method to measure the masses of new particles involved in the event.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The CMSN team working on computational-design-Fe-based-superconductors (Final Report)

This CMSN collaboration comprises four nodes. Rutgers (G. Kotliar K. Haule) , U Arizona(M. Van Schilfgaarde), UCDavis (S. Savrasov W. Pickett) and Ames National Labs-Iowa State University (J. Schmalian- K.M. Ho- V. Antropov). The goal of this CMSN was to develop an unified methodology for electronic structure calculations to estimate from first principles the physical properties of iron pnictides which should serve as a test of the methodologies and the codes. This goals requires the integration of methodologies to treat electron electron interactions ( which can be treated by DMFT GW and Gutzwiller methods ) and electron phonon interactions and magnetic interactions (to be treated in linear response) which were developed by the different members of this CMSN team. I summarize below the collaborative work carried out until now below stressing the difficult but all important task of joint code development. In this area significant advances have taken place during the last year. These include a) an integration of the DMFT code of the Rutgers group with the Gutzwiller codes developed in Iowa. The result is the best available code to carry out LDA+G and is having impact on correlated materials with f electrons. and b) A Wannier interface between the QP GW code developed in Arizona and the Rutgers DMFT codes. These developments will be continued and will open new capabilities to treat correlated materials in general, and will be applied to the iron pnictides in the final year of this CMSN.

Kotliar, Gabriel↗

Structural Health Monitoring of Epoxy Bond between Dissimilar Materials

Structures composed of adhesively bonded materials face many challenges when subjected to thermal loading, as adherend material(s) behave differently and can induce stresses in the glue bond. Current methods to test bond strength are limited to destructive tests, which increase costs to produce adhesively bonded structures. Strain gages are proposed to monitor the expansion profile of adhesive bonds as structures undergo thermal loading. Because resulting signals are DC in nature, no spectral quantities can be observed. Principle component analysis (PCA) is proposed to differentiate between damaged and undamaged structures. Training data are taken for various damage states and the minimum Mahalanobis distance is calculated to categorize testing data into damage state. The results indicate the potential for a strain-gage based monitoring system with PCA based decision-making, with further research necessary prior to implementation of the system.

36 MATERIALS SCIENCE↗

Density functional theory study of Fe{sub 3}Ga

First-principles scalar relativistic calculations in supercells of 16 atoms are used to represent disordered B2 ordering of Fe{sub 3}Ga in order to observe the effect of Ga-Ga pairs on the electronic structure of this alloy. From a comparison with pure bcc Fe it is observed that the energy position and occupation of e{sub g} and t{sub 2g} states are largely affected by the Ga-Ga pairs and strengthened intraplane interactions takes place. The results show that a larger hybridization of the conduction band is in the source of the magnetostriction enhancement experimentally observed in Galfenol.

36 MATERIALS SCIENCE↗

Observed 1970-2005 cooling of summer daytime temperatures in coastal California

The study evaluated 1948-2004 summer (JJA) mean monthly air temperatures for two California air basins: SoCAB and SFBA. The study focuses on the more rapid post-1970 warming period, and its daily T{sub min} and T{sub max} values were used to produce average monthly values and spatial distributions of trends for each air basins. Additional analyses included T{sub D} values at two NWS sites, SSTs, NCEP reanalysis sea-level pressures, and GCM T{sub ave}-values. Results for all California COOP sites together showed increased JJA T{sub ave}-values; asymmetric warming, as T{sub min}-values increase faster than T{sub max}-values; and thus decreased DTR values. The spatial distribution of observed SoCAB and SFBA T{sub max} values exhibited a complex pattern, with cooling in low-elevation coastal-areas open to marine air penetration and warming at inland areas. Results also showed that decreased DTR values in the valleys arose from small increases at 'inland' sites combined with large decreases at 'coastal' sites. Previous studies suggest that cooling JJA T{sub max}-values in coastal California were due to increased irrigation, coastal upwelling, or cloud cover, while the current hypothesis is that they arises from GHG-induced global-warming of 'inland' areas, which results in increased sea breeze flow activity. Sea level pressure trends showed increases in the oceanic Pacific High and decreases in the central-California Thermal Low. The corresponding gradient thus showed a trend of 0.02 hPa 100-km{sup -1} decade{sup -1}, supportive of the hypothesis of increased sea breeze activity. Trends in T{sub D} values showed a larger value at coastal SFO than at inland SEC, which indicative of increased sea breeze activity; calculated SST trends (0.15 C decade{sup -1}) could also have increase T{sub D}-values. GCM model Tave-values showed warming that decreases from 0.13 C decade{sup -1} at inland California to 0.08 C decade{sup -1} at coastal areas. Significant societal impacts may result from this observed 'reverse-reaction' to GHG-warming, i.e., the decreased JJA T{sub max}-values in coastal areas. Possible beneficial effects include decreased: maximum O{sub 3} levels, human thermal-stress, and energy requirements for cooling.

54 ENVIRONMENTAL SCIENCES↗

Control of hydrogen concentrations by microbial sulfate reduction in two contrasting anoxic coastal sediments

Introduction Molecular hydrogen is produced by the fermentation of organic matter and consumed by organisms including hydrogenotrophic methanogens and sulfate reducers in anoxic marine sediment. The thermodynamic feasibility of these metabolisms depends strongly on organic matter reactivity and hydrogen concentrations; low organic matter reactivity and high hydrogen concentrations can inhibit fermentation so when organic matter is poor, fermenters might form syntrophies with methanogens and/or sulfate reducers who alleviate thermodynamic stress by keeping hydrogen concentrations low and tightly controlled. However, it is unclear how these metabolisms effect porewater hydrogen concentrations in natural marine sediments of different organic matter reactivities. Methods We measured aqueous concentrations of hydrogen, sulfate, methane, dissolved inorganic carbon, and sulfide with high-depth-resolution and 16S rRNA gene assays in sediment cores with low carbon reactivity in White Oak River (WOR) estuary, North Carolina, and those with high carbon reactivity in Cape Lookout Bight (CLB), North Carolina. We calculated the Gibbs energies of sulfate reduction and hydrogenotrophic methanogenesis. Results Hydrogen concentrations were significantly higher in the sulfate reduction zone at CLB than WOR (mean: 0.716 vs. 0.437 nM H 2 ) with highly contrasting hydrogen profiles. At WOR, hydrogen was extremely low and invariant (range: 0.41–0.52 nM H 2 ) in the upper 15 cm. Deeper than 15 cm, hydrogen became more variable (range: 0.312–2.56 nM H 2 ) and increased until methane production began at ~30 cm. At CLB, hydrogen was highly variable in the upper 15 cm (range: 0.08–2.18 nM H 2 ). Ratios of inorganic carbon production to sulfate consumption show AOM drives sulfate reduction in WOR while degradation of organics drive sulfate reduction in CLB. Discussion We conclude more reactive organic matter increases hydrogen concentrations and their variability in anoxic marine sediments. In our AOM-dominated site, WOR, sulfate reducers have tight control on hydrogen via consortia with fermenters which leads to the lower observed variance due to interspecies hydrogen transfer. After sulfate depletion, hydrogen accumulates and becomes variable, supporting methanogenesis. This suggests that CLB’s more reactive organic matter allows fermentation to occur without tight metabolic coupling of fermenters to sulfate reducers, resulting in high and variable porewater hydrogen concentrations that prevent AOM from occurring through reverse hydrogenotrophic methanogenesis.

Microbiology↗

MAGNETOHYDRODYNAMIC SIMULATIONS OF RECONNECTION AND PARTICLE ACCELERATION: THREE-DIMENSIONAL EFFECTS

Magnetic fields can change their topology through a process known as magnetic reconnection. This process in not only important for understanding the origin and evolution of the large-scale magnetic field, but is seen as a possibly efficient particle accelerator producing cosmic rays mainly through the first-order Fermi process. In this work we study the properties of particle acceleration inserted in reconnection zones and show that the velocity component parallel to the magnetic field of test particles inserted in magnetohydrodynamic (MHD) domains of reconnection without including kinetic effects, such as pressure anisotropy, the Hall term, or anomalous effects, increases exponentially. Also, the acceleration of the perpendicular component is always possible in such models. We find that within contracting magnetic islands or current sheets the particles accelerate predominantly through the first-order Fermi process, as previously described, while outside the current sheets and islands the particles experience mostly drift acceleration due to magnetic field gradients. Considering two-dimensional MHD models without a guide field, we find that the parallel acceleration stops at some level. This saturation effect is, however, removed in the presence of an out-of-plane guide field or in three-dimensional models. Therefore, we stress the importance of the guide field and fully three-dimensional studies for a complete understanding of the process of particle acceleration in astrophysical reconnection environments.

79 ASTRONOMY AND ASTROPHYSICS↗

Improved pressure-gradient sensor for the prediction of separation onset in RANS models

Here, we improve upon two key aspects of the Menter shear stress transport (SST) turbulence model: (1) We propose a more robust adverse pressure gradient sensor based on the strength of the pressure gradient in the direction of the local mean flow; (2) We propose two alternative eddy viscosity models to be used in the adverse pressure gradient regions identified by our sensor. Direct numerical simulations of the Boeing Gaussian bump are used to identify the terms in the baseline SST model that need correction, and a posteriori Reynolds-averaged Navier-Stokes calculations are used to calibrate coefficient values, leading to a model that is both physics driven and data informed. The two sensor-equipped models are applied to two thick airfoils representative of modern wind turbine applications, the FFA-W3-301 and the DU00-W-212. The proposed models improve the prediction of stall (onset of separation) with respect to the prediction of the baseline SST model.

17 WIND ENERGY↗

Effectiveness of Sorbents to Reduce Mercury Methylation

Experiments were completed to assess the effectiveness of Biochar, ThiolSAMMS®, SediMite™, and Organoclay-199 to decrease methylmercury (MeHg) production by the known mercury methylator, Desulfovibrio desulfuricans ND132 (ND132), and to decrease aqueous (i.e., 0.2 μM filter passing) MeHg concentrations. Mercury (Hg) was introduced as Hg(II) or a preequilibrated Hg-DOM (dissolved organic matter) complex. Individual experiments tested the effect of sulfate concentration and Hg-sorbent equilibration time (up to 1 year). The sorbents provided little, if any, inhibition of total MeHg production, but decreased the percentage of MeHg that passed a 0.2 μm filter. Total MeHg produced was substantially greater than the calculated equilibrium aqueous inorganic Hg (Hgi), based on sorption isotherms, implying mercury assumed to be sorbed at the start of the assay was bioaccessible over the 24-h methylation timeframe. MeHg production increased when Hgi was introduced as an Hg:DOM complex, compared to Hg(II). Some of the increased MeHg production may be attributed to lower Hgi sorption with DOM present, but a substantial amount of sorbed Hg must have been accessible also. DOM also increased the filter-passing MeHg fraction, stressing the importance of Hg-DOM and MeHg-DOM interactions in experimental investigations. Sulfate concentrations did not affect Hg(II) methylation and could not explain the increased methylation seen with the Hg:DOM complex. Extended equilibration of Hg-sorbent mixtures for up to 1 year before the methylation assays did not affect the amount of MeHg produced for Biochar or SediMite treatments, but significantly lowered MeHg production for ThiolSAMMS. As a result, inclusion of DOM in these experiments presented the sorbents with a more environmentally relevant form of Hg and lowered sorbent effectiveness to decrease MeHg production and sorb produced MeHg.

54 ENVIRONMENTAL SCIENCES↗

A wide-range thermodynamically consistent constitutive model for dynamic loading of partially saturated porous media

SUMMARY This paper presents a novel thermodynamically consistent constitutive model for partially saturated porous rocks across a wide range of conditions. The material states generated behind the shock wave from an explosive source can vary significantly, ranging from crushed and melted rock near the source to a poroelastic medium in the far field. In the model, rock strength is determined by the effective pressure, which is calculated using two independent equations of state: one for the solid rock and another for the pore fluid. The model accounts for shock-induced liquefaction resulting from fluid pressure buildup in the pore spaces near the explosive source. Simultaneously, it describes the increase in wave propagation speed due to elastic pore contraction in both dry and partially saturated rocks. This model is applied to investigate how fluid saturation affects the amplitude and shape of the generated waves, as well as the residual stress surrounding the cavity formed by spherical explosions.

Vorobiev, Oleg [Lawrence Livermore National Labora↗