Search NASA⌕ Search

SEARCH · Search NASA

Results for “Software development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Final Report

This final progress report describes the development of the CANDO Software package at ThirdLaw Technologies LLC (TLT) towards a software platform that will be used by its subsidiary company ThirdLaw Molecular LLC (TLM) for the development of therapeutic Spiroligomer™ molecules. ThirdLaw Molecular LLC is 95% owned by ThirdLaw Technologies LLC. TLM is developing a new therapeutics platform based on Spiroligomer™ molecules and is currently funded by the Department of Defense, Defense Threat Reduction Agency (DOD/DTRA W15QKN209C004). Spiroligomer™ molecules are complex, highly-preorganized macromolecules with programmable three-dimensional shapes. Spiroligomer™ molecules are currently synthesized by TLM in the form of large (>880,000 member) DNA-encoded libraries and screened against dangerous bacteria and viruses as part of the DOD/DTRA project. The CANDO software package is being developed to enable the computational design of Spiroligomer™ molecules for the development of therapeutic and diagnostic molecules. Towards this end, over the period of the grant we implemented software algorithms and a user interface within CANDO to enable the computational design of Spiroligomer™ molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cheetah : software for high-throughput reduction and analysis of serial femtosecond X-ray diffraction data

The emerging technique of serial X-ray diffraction, in which diffraction data are collected from samples flowing across a pulsed X-ray source at repetition rates of 100 Hz or higher, has necessitated the development of new software in order to handle the large data volumes produced. Sorting of data according to different criteria and rapid filtering of events to retain only diffraction patterns of interest results in significant reductions in data volume, thereby simplifying subsequent data analysis and management tasks. Meanwhile the generation of reduced data in the form of virtual powder patterns, radial stacks, histograms and other meta data creates data set summaries for analysis and overall experiment evaluation. Rapid data reduction early in the analysis pipeline is proving to be an essential first step in serial imaging experiments, prompting the authors to make the tool described in this article available to the general community. Originally developed for experiments at X-ray free-electron lasers, the software is based on a modular facility-independent library to promote portability between different experiments and is available under version 3 or later of the GNU General Public License.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MAUS: the MICE analysis user software

The Muon Ionization Cooling Experiment (MICE) collaboration has developed the MICE Analysis User Software (MAUS) to simulate and analyze experimental data. It serves as the primary codebase for the experiment, providing for offline batch simulation and reconstruction as well as online data quality checks. The software provides both traditional particle-physics functionalities such as track reconstruction and particle identification, and accelerator physics functions, such as calculating transfer matrices and emittances. The code design is object orientated, but has a top-level structure based on the Map-Reduce model. This allows for parallelization to support live data reconstruction during data-taking operations. MAUS allows users to develop in either Python or C++ and provides APIs for both. Various software engineering practices from industry are also used to ensure correct and maintainable code, including style, unit and integration tests, continuous integration and load testing, code reviews, and distributed version control. The software framework and the simulation and reconstruction capabilities are described.

47 OTHER INSTRUMENTATION↗

High Performance Heat Pipe Power Transient Testing at SPHERE Facility

Microreactors are being researched, designed, and built at Idaho National Laboratory (INL). Microreactors are small reactors defined at less than 20MW of power. These reactor concepts are also being looked at throughout industry for various applications. An important aspect of these reactor designs is economic feasibility i.e. lower overnight capital cost. The driving factors for implementing microreactors are quick setup and takedown, minimal operators, and the ability to manufacture them readily and to fit in mid-sized containers for transport. A specific area of research to aid in successful integration of these factors within the designs is passive heat removal of the core’s thermal power. Interest in heat pipes to achieve this passive heat removal has been shown across multiple industry partners. Because of this interest, INL has developed a test facility to facilitate experimental tests for sodium filled heat pipes. INL has developed the Single Primary Heat Extraction and Removal Emulator (SPHERE) facility to run experiments on high performance, sodium filled heat pipes. As mentioned above, heat pipes are passive heat transfer devices. Radially, heat pipes are broken up into an outer wall, a small annular gap, a wick structure, and a centerline gap. They function by utilizing latent heat transfer. Heat pipes are traditionally separated into three regions, an evaporator (heat input), an adiabatic region, and finally a condenser region (heat removal). As heat is being applied to the evaporator, the working fluid undergoes a phase change to a vapor. This phase change causes a differential pressure across the axial length of the pipe driving flow down the center gap of the heat pipe. The vapor flows down past the adiabatic region to the condenser where the heat is removed. This heat removal forces the working fluid to phase change back to a liquid. The wick structure is then utilized to drive the flow back towards the evaporator by capillary forces. This backflow is aided by the annular gap. Because this heat transfer mechanism functions with latent heat transfer, the heat pipe is close to isothermal down the axial length. Heat pipes can operate under a wide range of working fluids. Considerations for these working fluids are primarily driven by operating temperatures amongst other important factors based around overall performance. Sodium filled heat pipes operate from 450°C up to 900°C. This temperature range works well for the current microreactor designs. In conjunction with this experimental capability, INL has developed a modeling software to simulate heat pipe physics within reactor cores. This modeling software is called Sockeye and functions under the established INL Multiphysics Object Oriented Simulation Environment (MOOSE). SPHERE also supports Sockeye development by providing the modeling team with experimental data on an array of setups and operating parameters to support validation efforts. A power transient experiment was performed utilizing the SPHERE facility to continue to aid with Sockeye development. The testing followed a proposed test plan to ramp up and down the temperature of the heat pipe. Sockeye models steady state heat pipe operation with high accuracy, the data provided by the power transient testing aims to assist with the validation efforts and further enhance transient modeling capability of the tool [2].

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Development of HydroImage, A User Friendly Hydrogeophysical Characterization Software

HydroImage, user-friendly software that utilizes high-resolution geophysical data for estimating hydrogeological parameters in subsurface strata, was developed under this grant. HydroImage runs on the personal computer platform to promote broad use by hydrogeologists to further understanding of subsurface processes that govern contaminant fate, transport, and remediation. The unique software provides estimates of hydrogeological properties over continuous volumes of the subsurface, whereas previous approaches only allow estimation of point locations. Thus, this unique tool can be used to significantly enhance site conceptual models and improve design and operation of remediation systems.

54 ENVIRONMENTAL SCIENCES↗

Workshop on Advanced Computing for Connected and Automated Vehicles

To safely and reliably operate without a human driver, connected and automated vehicles (CAVs) require more advanced computing hardware and software solutions than are implemented today in vehicles that provide driver-assistance features. A workshop was held to discuss advanced microelectronics and computing approaches that can help meet future energy and computational requirements for CAVs. Workshop questions were posed as follows: will highly automated vehicles be viable with conventional computing approaches or will they require a step-change in computing; what are the energy requirements to support on-board sensing and computing; and what advanced computing approaches could reduce the energy requirements while meeting their computational requirements? At present, there is no clear convergence in the computing architecture for highly automated vehicles. However, workshop participants generally agreed that there is a need to improve the computing performance per watt by at least 10x to advance the degree of automation. Participants suggested that DOE and the national laboratories could play a near-term role by developing benchmarks for determining and comparing CAV computing performance, developing public data sets to support algorithm and software development, and contributing precompetitive advancements in energy efficient computing.

33 ADVANCED PROPULSION SYSTEMS↗

New Strategies for 0.5 mm Resolution, High Sensitivity, Multi- Radionuclide Imaging

This project constitutes a 0.5-millimeter resolution radionuclide detector system built from CZT. (1) A novel dual-crystal photon detector module design with cross-strip electrode patterns was developed; (2) The module mechanical assembly was built; (3) A data acquisition (DAQ) chain for the module was produced; (4) A software tool was developed to incorporate novel time and energy measurement calibration techniques. (5) A small multi-detector prototype of the radionuclide imaging system was built from this module for system-level characterizations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Supporting Building Portfolio Investment and Policy Decision Making through an Integrated Building Utility Data Platform

The American Recovery and Reinvestment Act stimulus funding of 2009 for smart grid projects resulted in the tripling of smart meters deployment. In 2012, the Green Button initiative provided utility customers with access to their real-time1 energy usage. The availability of finely granular data provides an enormous potential for energy data analytics and energy benchmarking. The sheer volume of time-series utility data from a large number of buildings also poses challenges in data collection, quality control, and database management for rigorous and meaningful analyses. In this paper, we will describe a building portfolio-level data analytics tool for operational optimization, business investment and policy assessment using 15-minute to monthly intervals utility data. The analytics tool is developed on top of the U.S. Department of Energy’s Standard Energy Efficiency Data (SEED) platform, an open source software application that manages energy performance data of large groups of buildings. To support the significantly large volume of granular interval data, we integrated a parallel time-series database to the existing relational database. The time-series database improves on the current utility data input, focusing on real-time data collection, storage, analytics and data quality control. The fully integrated data platform supports APIs for utility apps development by third party software developers. These apps will provide actionable intelligence for building owners and facilities managers. Unlike a commercial system, this platform is an open source platform funded by the U.S. Government, accessible to the public, researchers and other developers, to support initiatives in reducing building energy consumption.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Dependability Assessment of Software for Safety Instrumentation and Control Systems

In its 2013 recommendations to the International Atomic Energy Agency (IAEA), the Technical Working Group on Nuclear Power Plant Instrumentation and Control (TWG-NPPIC) identified assessment and evaluation of software dependability as a topic of interest for IAEA Member States. To implement the recommendation of the TWG-NPPIC, the IAEA Scientific Secretary for the TWG initiated a consultancy activity in 2014 to develop a technical report describing a dependability assessment framework suitable for safety instrumentation and control (I and C) systems in nuclear power plants (NPPs). The development of the software dependability assessment report has involved three consultancy meetings at IAEA headquarters in Vienna, Austria. The conduct of these meetings allowed consultation among subject matter experts to generate consensus technical information that serves as the content of the report. The technical contributors consist of international experts from academia, industry, regulatory bodies and research organizations. In September 2014, a technical meeting was held in Daejeon, Republic of Korea, to present interim findings of the consultancy effort and to solicit input from representatives of IAEA Member States. The information and technical comments contributed during the technical meeting were addressed in subsequent development of the report. This paper gives an overview of key technical elements of the IAEA report. The IAEA report presents a framework by which a dependability assessment of safety software can be performed. The specified guiding principles provide the basis for establishing an assessment strategy and implementing the assessment process. The assessment framework provides a systematic, coherent structure within which to organize technical and process evidence to satisfy arguments in support of claims about software dependability properties. During the consultancy activity, the participating subject matter experts focused on high level principles, a structured approach, and identification of suitable methods and techniques. However, it was recognized that what remains is to concretize the framework through specific examples and usage experience. Thus, following publication of the report, it is recommended that case studies be performed to illustrate and more precisely define specific phases and elements of the assessment framework. For example, current national assessment approaches could be mapped into the assessment framework to serve as case studies and help to identify any aspects of the assessment framework that needs further definition or adjustment. Additionally, a challenge problem could be defined to engage stakeholders to apply the assessment framework with a common focus. This could help to better illustrate strategic options and approaches to the assessment phases. It also could serve to suggest other considerations and potential sources of evidence not fully covered in the report. Based on findings from case studies, challenge problems and country experience, it should be possible to develop generalized templates to support application of the assessment framework. These findings can be collected to serve as the basis for a User's Guide on dependability assessment of safety software. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dynamic Path Scheduling through Extensions to Generalized Multiprotocol Label Switching (GMPLS) (Final Report)

The major accomplishments of the project are the successful software implementation of the Phase I scheduling algorithms for GMPLS Label Switched Paths (LSPs) and the extension of the IETF Path Computation Element (PCE) Protocol to support scheduling extensions. In performing this work, we have demonstrated the theoretical work of Phase I, analyzed key issues, and made relevant extensions. Regarding the software implementation, we developed a proof of concept prototype as part of our Algorithm Evaluation System (AES). This implementation uses the Linux operating system to provide software portability and will be the foundation for our commercial software. To demonstrate proof of concept, we have implemented LSP scheduling algorithms to support two of the key GMPLS switching technologies (Lambda and Packet) and support both Fixed Path (FP) and Switched Path (SP) routing. We chose Lambda and Packet because we felt it was essential to include both circuit and packet switching technologies as well as to address all-optical switching in the study. As conceptualized in Phase I, the FP algorithms use a traditional approach where the LSP uses the same physical path for the entire service duration while the innovative SP algorithms allow the physical path to vary during the service duration. As part of this study, we have used the AES to conduct a performance analysis using metro size networks (up to 32 nodes) that showed that these algorithms are suitable for commercial implementation. Our results showed that the CPU time required to compute an LSP schedule was small compared to expected inter-arrival time between LSP requests. Also, when the network size increased from 7 to 15 to 32 nodes with 10, 26, and 56 TE links, the CPU processing time showed excellent scaling properties. When Fixed Path and Switched Path routing were compared, SP provided only modestly better performance with respect to LSP completion rate, service duration, path length, and start time deviation. In addition, the SP routing required somewhat more CPU time than the FP routing. However, when the allowable range for the start time is increased, the CPU time for SP increased less rapidly than FP such that the CPU processing times became comparable. Therefore, SP routing may scale better than FP routing. The Path Computation Element Working Group is a complementary working group to the GMPLS working group (CCAMP) in the IETF and is developing standards to discover, manage, and access elements that compute routes for GMPLS for LSPs. The algorithms used to compute the routes are not subject to standardization. Since the PCE supports only standard GMPLS LSPs, it does not support scheduled LSPs. Therefore, it is a natural extension of our Phase I work to introduce this enhancement into the PCE. In addition, the PCE adds another dimension to our product line because the PCE by itself may be a product with a standard interface.

97 MATHEMATICS AND COMPUTING↗

An Overview of the Monte Carlo Application ToolKit (MCATK)

MCATK is a C++ component-based Monte Carlo neutron-gamma transport software library designed to build specialized applications and designed to provide new functionality in existing general-purpose Monte Carlo codes like MCNP; it was developed with Agile software engineering methodologies under the motivation to reduce costs. The characteristics of MCATK can be summarized as follows: MCATK physics – continuous energy neutron-gamma transport with multi-temperature treatment, static eigenvalue (k and α) algorithms, time-dependent algorithm, fission chain algorithms; MCATK geometry – mesh geometries, solid body geometries. MCATK provides verified, unit-tested Monte Carlo components, flexibility in Monte Carlo applications development, and numerous tools such as geometry and cross section plotters. Recent work has involved deterministic and Monte Carlo analysis of stochastic systems. Static and dynamic analysis is discussed, and the results of a dynamic test problem are given.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Quantitative Parameter Estimation, Model Selection, and Variable Selection in Battery Science

Numerical physics-based models are useful in understanding battery performance and devel- oping optimal battery design architectures. Data science developments have enabled software algorithms to perform data analysis and decision making that traditionally could only be per- formed by technical experts. Traditional workflows of model development - manual parameter estimation through visual comparison of simulations to experimental observations, and model discrimination through expert intuition - are time-consuming, and difficult to justify. This paper compares the conclusions derived from computationally scalable algorithms to conclu- sions developed by expert researchers. This paper illustrates how data science techniques, such as cross-validation and lasso regression, can be used to augment physics-based simulations to perform data analysis such as parameter estimation, model selection, variable selection, and model-guided design of experiment. The validation of these algorithms is that they produce results similar to those of the expert modeler. The algorithms outlined are well-established and the approaches are general, so can be applied to a variety of battery chemistries and architectures. The conclusions reached using these approaches are in agreement with expert analysis (literature results), were reached with minimal human intervention, and provide quantitative justification. By minimizing the amount of expert time, and providing rigorous quantitative justifications, these methods may accelerate battery development.

25 ENERGY STORAGE↗

Integration and Optimization of a Waste Heat Driven Organic Rankine Cycle for Power Generation in Wastewater Treatment Plants

The study focuses on achieving energy self-sufficiency in Wastewater Treatment Plants by proposing a comprehensive model for integrating, sizing, and optimizing an Organic Rankine Cycle system. The Organic Rankine Cycle system is designed to utilize waste heat from the gensets at As Samra Wastewater Treatment Plant in Jordan, where it will contribute to the overall electrical energy supply of the plant. Real data from As Samra Wastewater Treatment Plant is used to model and calculate the available waste heat using TRNSYS® software. The Organic Rankine Cycle model is then developed using ASPEN PLUS® software to explore the impact of operational parameters and determine their optimal values for maximizing the plant's energy profile. An economic analysis is conducted to assess the feasibility of the proposed model, considering system components, installation, operation, and maintenance costs. To optimize the Organic Rankine Cycle system, the study employs the Multi-Output Support Vector Regression technique to capture nonlinear relationships between independent variables (fluid type, turbine inlet pressure, turbine inlet temperature, turbine outlet pressure, and mass flow rate) and dependent variables (pump power input, waste heat input, and turbine specific work). The Osprey optimization algorithm is used to address the multi-objective optimization problem, with the proposed Pareto-based Osprey Optimization Algorithm and the Multi-Objective Particle Swarm Optimization technique being employed to evaluate critical performance and economic parameters such as system thermal efficiency, net power output, and the levelized cost of electricity. The results of the optimization strategies indicate that the M-SVR model's prediction accuracy is significantly improved after parameter optimization, with the model returning high R 2 and low Mean Square Error values of 0.991 and 0.00216, respectively. The Pareto-Based Osprey Optimization Algorithm optimizer identifies the best working fluid as Isobutane/Isopentane in a ratio of 66:34, with optimal turbine inlet pressure and temperature of 15 bars and 218 °C, respectively. In conclusion, the Organic Rankine Cycle model at these optimal conditions achieves a cycle efficiency of 19.93% and an Levelized Cost of Electricity value of 0.0353 USD/kWh.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

COUPLING OF RELAP5-SCDAP MOD4.0 AND NEUTRONIC CODES

High-fidelity and accurate nuclear system codes play a key role in the design and analysis of complex nuclear power plants, which consist of multiple subsystems, such as the reactor core (and its fuel, burnable poisons, control elements, etc.), the reactor internal structures, the vessel, and the energy conversion subsystem and beyond to grid demand. Most commonly the interplay between these various subsystems is modeled using coupled codes, each of which represents one of the subsystems. And the most common direct coupling is that of thermal-hydraulics and neutronics codes. The subject of this paper is the coupling of codes that model not only thermal-hydraulics and neutronics, but also structural components damage. Furthermore, the neutronic component is not limited to the sole core solver. The coupled code system encompasses thermal-hydraulics, material performance of the fuel, neutronic solver, and neutronic data preparation. Thus, this paper presents a framework for coupling RELAP5/SCDAPSIM/MOD4.0 with a suite of neutron kinetics codes that includes NESTLE, DRAGON and a version of the ENDF library. The version of the RELAP5/SCDAPSIM/MOD4.0 code used in this work is one developed by Innovate System Software (ISS) as part of the international SCDAP Development and Training Program (SDTP) for best-estimate analysis to model reactor transients including severe accident phenomena. This RELAP5/SCDAPSIM/MOD4.0 code version is also capable of predicting nuclear fuel performance. It uses nodal power distributions to calculate mechanical and thermal parameters such as heat-up, oxidation and meltdown of fuel rods and control rods, the ballooning and rupture of fuel rod cladding, the release of fission products from fuel rods, and the disintegration of fuel rods into porous debris and molten material. On the neutronics side, this work uses the NESTLE and DRAGON codes. NESTLE is a multi-dimensional static and kinetic neutronic code developed at North Carolina State University. It solves up to four energy groups neutron diffusion equations utilizing the Nodal Expansion Method (NEM) in Cartesian or hexagonal geometry. The DRAGON code, developed at Ecole Polytechnique de Montreal, performs lattice physics calculations based on the neutron transport equation and is capable of using very fine energy group structures. In this work, we have developed a coupling approach to exchange data among the various modules. In the coupling process, the generated nuclear data (in fine multigroup energy structure) are collapsed down into two- or four-group energy structures for use in NESTLE. The neutron kinetics and thermal-hydraulics modules are coupled at each time step by using the cross-section data. The power distribution results of the neutronic calculations are transmitted to the thermal-hydraulics code. The spatial distribution of coolant density and the fuel-moderator temperature, which result from the thermal-hydraulic calculations, are transmitted back to the neutron kinetics codes and then the loop is closed using new neutronics results. Details of the actual data transfers will be described in the full length paper.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

High-level support for simulations in astro- and elementary particle physics

To fully exploit the potential of modern supereomputing systems, when performing particle and astrophysics simulations, the special user support unite called simulation laboratory “Elementary- and Astro-Particle Physics” (Sim-Lab E&A Particle) is established at Steinbuch Centre for Computing of the Karlsruhe Institute for Technology. SimLab is providing advanced support to scientific groups in developing the simulation software and porting them into up-to-date super-computing infrastructures. Some details of how the SimLab is governed and cooperation with developers and users of codes are presented in this work in progress paper including examples about code THiSMPI for simulation of particle accelerations in supernovae shock fronts and the KB3D code for solving quantum kinematic equations that could be used in simulations of heavy ion collisions or laser excited semiconductor systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum Application Specifications and Benchmarks

This software describes computational tasks for quantum computers that are derived from LANL basic science research applications such as the modeling of materials, chemicals and compounds at atomic scales. The computations focus on quantum simulation tasks, such as quantum dynamics, thermal state preparation and ground state estimation. The primary function of the software is to develop estimates of the requirements for large-scale fault-tolerant quantum computers to solve these scientific computations. The secondary focus of the software are codes for assessing the limitations of conducting quantum computations on classical computers.

Coffrin, Carleton↗

Predictive Model and Methodology for Heat Treatment Distortion Final Report CRADA No. TC-298-92

This project was a multi-lab, multi-partner CRADA involving LLNL, Los Alamos National Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, Martin Marietta Energy Systems and the industrial partner, The National Center of Manufacturing Sciences (NCMS). A number of member companies of NCMS participated including General Motors Corporation, Ford Motor Company, The Torrington Company, Gear Research, the Illinois Institute of Technology Research Institute, and Deformation Control Technology •. LLNL was the lead laboratory for metrology technology used for validation of the computational tool/methodology. LLNL was also the lead laboratory for the development of the software user interface , for the computational tool. This report focuses on the participation of LLNL and NCMS. The purpose of the project was to develop a computational tool/methodology that engineers would use to predict the effects of heat treatment on the _size and shape of industrial parts made of quench hardenable alloys. Initially, the target application of the tool was gears for automotive power trains.

36 MATERIALS SCIENCE↗