Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structured Programming”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Automated procedure for design of wing structures to satisfy strength and flutter requirements

A pilot computer program was developed for the design of minimum mass wing structures under flutter, strength, and minimum gage constraints. The wing structure is idealized by finite elements, and second-order piston theory aerodynamics is used in the flutter calculation. Mathematical programing methods are used for the optimization. Computation times during the design process are reduced by three techniques. First, iterative analysis methods used to reduce significantly reanalysis times. Second, the number of design variables is kept small by not using a one-to-one correspondence between finite elements and design variables. Third, a technique for using approximate second derivatives with Newton's method for the optimization is incorporated. The program output is compared witH previous published results. It is found that some flutter characteristics, such as the flutter speed, can display discontinous dependence on the design variables (which are the thicknesses of the structural elements). It is concluded that it is undesirable to use such quantities in the formulation of the flutter constraint.

Haftka, R. T.↗

Analyzing Static Loading of Complex Structures

Critical loading conditions determined from analysis of each structural element. Automated Thrust Structures Loads and Stresses (ATLAS) system is series of programs developed to analyze elements of complex structure under static-loading conditions. ATLAS calculates internal loads, beam-bending loads, column- and web-buckling loads, beam and panel stresses, and beam-corner stresses. Programs written in FORTRAN IV and Assembler for batch execution.

Gallear, D. C.↗

The UPC++ PGAS library for exascale computing. Extended Abstract

We describe UPC++ V1.0, a C++11 library that supports APGAS programming. UPC++ targets distributed data structures where communication is irregular or fine-grained. The key abstractions are global pointers, asynchronous programming via RPC, and futures. Global pointers incorporate ownership information useful in optimizing for locality. Futures capture data readiness state, are useful for scheduling and also enable the programmer to chain operations to execute asynchronously as high-latency dependencies become satisfied, via continuations. The interfaces for moving non-contiguous data and handling memories with different optimal access methods are composable and closely resemble those used in modern C++. Communication in UPC++ runs at close to hardware speeds by utilizing the low-overhead GASNet-EX communication library.

97 MATHEMATICS AND COMPUTING↗

Smartfiles: An OO approach to data file interoperability

Data files for scientific and engineering codes typically consist of a series of raw data values whose descriptions are buried in the programs that interact with these files. In this situation, making even minor changes in the file structure or sharing files between programs (interoperability) can only be done after careful examination of the data file and the I/O statement of the programs interacting with this file. In short, scientific data files lack self-description, and other self-describing data techniques are not always appropriate or useful for scientific data files. By applying an object-oriented methodology to data files, we can add the intelligence required to improve data interoperability and provide an elegant mechanism for supporting complex, evolving, or multidisciplinary applications, while still supporting legacy codes. As a result, scientists and engineers should be able to share datasets with far greater ease, simplifying multidisciplinary applications and greatly facilitating remote collaboration between scientists.

Haines, Matthew↗

Management of a coordinated parts program

The organization of the management of a parts program is discussed. The organizational structure faced by the parts manager and the advantages and disadvantages of managing a coordinated parts program are analyzed. The reliable operation of an instrument is the key to the success of the mission, together with the management of the parts program. The analysis led to the conclusion that the setting up of the decision support model will aid the parts manager in the decision making and the process control.

Krishnan, G. S.↗

Compression Ratio Ion Mobility Programming (CRIMP) Accumulation and Compression of Billions of Ions for Ion Mobility-Mass Spectrometry Using Traveling Waves in Structures for Lossless Ion Manipulations (SLIM)

We report on the implementation of a traveling wave (TW) based compression ratio ion mobility programming (CRIMP) approach within Structures for Lossless Ion Manipulations (SLIM) that enables both greatly enlarged trapped ion charge capacities and also their subsequent efficient compression for use in ion mobility (IM) separations. Ion accumulation is conducted in a long serpentine path TW SLIM region after which CRIMP allows the large ion populations to be ‘squeezed’. The compression process occurs at an interface between two SLIM regions, one operating conventionally and the second having an intermittently pausing or ‘stuttering’ TW, allowing the contents of multiple bins of ions from the first region to be merged into a single bin in the second region. In this initial work stationary voltages in the second region were used to block ions from exiting the first (trapping) region, and the resumption of TWs in the second region allows ions to exit, and the population to also be compressed if CRIMP is applied. In our initial evaluation we show that the number of charges trapped for a 40 s accumulation period was ~5×109, more than two orders of magnitude greater than the previously reported charge capacity using an ion funnel trap. We also show that over 1×109 ions can be accumulated with high efficiency in the present device, and that the extent of subsequent compression is only limited by the space charge capacity of the trapping region. Lower compression ratios allow increased IM peak heights without significant loss of signal, while excessively large compression ratios can lead to ion losses and other artifacts. Importantly, we show that extended ion accumulation in conjunction with CRIMP and multiple passes provides the basis for a highly desirable combination of ultra-high sensitivity and ultra-high resolution IM separations using SLIM.

Environmental Molecular Sciences Laboratory↗

Update on the Development of Externally Powered Dielectric-Loaded Accelerating Structures

We report on recent progress in a program to develop an RF-driven Dielectric-Loaded Accelerating (DLA) structure, capable of supporting high gradient acceleration. Previous high power tests revealed that the earlier DLA structures suffered from multipactor and arcing at the dielectric joint. A few new DLA structures have been designed to alleviate this limitation including the coaxial coupler based DLA structure and the clamped DLA structure. These structures were recently fabricated and high power tested at the NRL X-band Magnicon facility. Results show the multipactor can be reduced by the TiN coating on the dielectric surface. Gradient of 15 MV/m has also been tested without dielectric breakdown in the test of the clamped DLA structure. Detailed results are reported, and future plans discussed.

43 PARTICLE ACCELERATORS↗

Statistical Energy Analysis Program

Statistical Energy Analysis (SEA) is powerful tool for estimating highfrequency vibration spectra of complex structural systems and incorporated into computer program. Basic SEA analysis procedure divided into three steps: Idealization, parameter generation, and problem solution. SEA computer program written in FORTRAN V for batch execution.

Ferebee, R. C.↗

Orbiter structural design and verification

The space shuttle development program provided the opportunity to challenge many of the established practices and approaches used in prior manned space flight programs. The most significant accomplishments and resulting precedents which emerged during the structural development of the space shuttle and the space shuttle orbiter are reviewed. Innovations in criteria, design solutions, and certification are highlighted, and brief comments on the lessons learned are included. Thermal stress, graphite epoxy moisture, window structure, and structural inspection are discussed under lessons learned.

Glynn, P. C.↗

Structural evaluation of composite fuselage structure fabricated using a THERM-X process

An experimental and analytical program has been implemented to evaluate the structural performance of complex composite parts made using THERM-X processing techniques. Preliminary analysis shows 22-percent cost savings for parts made with a THERM-X process over parts made with conventional manufacturing methods. Results of building-block tests from the coupon to the element level, which represent structural details of the curved integrally stiffened panel selected as the full-scale article, are also reported. Comparisons with baseline results and analytical predictions show that THERM-X processing yields parts with stiffness and strength comparable to or slightly better than conventional manufacturing procedures. Compression strength after low-speed impact damage (caused by a drop weight impactor) is also comparable to parts fabricated with conventional methods.

Kassapoglou, Christos↗

Update on the development of externally powered dielectric-loaded accelerating structures.

We report on recent progress in a program to develop an RF-driven Dielectric-Loaded Accelerating (DLA) structure, capable of supporting high gradient acceleration. Previous high power tests revealed that the earlier DLA structures suffered from multipactor and arcing at the dielectric joint. A few new DLA structures have been designed to alleviate this limitation including the coaxial coupler based DLA structure and the clamped DLA structure. These structures were recently fabricated and high power tested at the NRL X-band Magnicon facility. Results show the multipactor can be reduced by the TiN coating on the dielectric surface. Gradient of 15 MV/m has also been tested without dielectric breakdown in the test of the clamped DLA structure. Detailed results are reported, and future plans discussed.

36 MATERIALS SCIENCE↗

Use of a hexapod in diffraction measurements of substrate supported crystals of organic semiconductors

Thin films of organic semiconductor prepared on substrates generally contain crystals that have one common crystal plane parallel to the substrate but random in-plane orientations. In diffraction measurements of these structures, it is often required to anchor the X-ray beam on a fixed spot on the sample, such as an optically visible crystallite or island. Here, a hexapod is used in place of a traditional multi-circle diffractometer to perform area-detector-based diffraction measurements on an actual device that contains 6,13-bis(triisopropylsilyethynyl)-pentacene (TIPS-pentacene) crystals. The hexapod allows for sample rotations about any user-defined rotation center. Two types of complex sample motions have been programmed to characterize the structure of the TIPS-pentacene crystal: an in-plane powder average has been performed at a fixed grazing-incident angle to determine the lattice parameters of the crystal; then the in-plane component of the scattering vector was continuously rotated in transmission geometry to determine the local crystal orientation.

47 OTHER INSTRUMENTATION↗

Experiments of water-moderated plutonium metal arrays: part I — description

In the mid-1970s and early 1980s, almost one hundred critical and approach-to-critical experiments using water-moderated plutonium metal arrays were performed at the Rocky Flats Critical Mass Laboratory. The experiments were performed in two programs: 2x2xN arrays conducted in the 1970s and 3x3x3 arrays conducted in the 1980s. Both sets of experiments used the same double-canned plutonium parts and were water moderated. The major differences between the two programs were the support structure and tank and the administrative limits on criticality. This paper summarizes the critical data and results of both sets of experiments. In conclusion, these experiments are then analyzed in a companion paper.

42 ENGINEERING↗

A comparative analysis of static and dynamic load balancing strategies

The problem of uniformly distributing the load of a parallel program over a multiprocessor system was considered. A program was analyzed whose structure permits the computation of the optimal static solution. Then four strategies for load balancing were described and their performance compared. The strategies are: (1) the optimal static assignment algorithm which is guaranteed to yield the best static solution, (2) the static binary dissection method which is very fast but suboptimal, (3) the greedy algorithm, a static fully polynomial time approximation scheme, which estimates the optimal solution to arbitrary accuracy, and (4) the predictive dynamic load balancing heuristic which uses information on the precedence relationships within the program and outperforms any of the static methods. It is also shown that the overhead incurred by the dynamic heuristic is reduced considerably if it is started off with a static assignment provided by either of the three strategies.

Iqbal, M. Ashraf↗

Performance tradeoffs in static and dynamic load balancing strategies

The problem of uniformly distributing the load of a parallel program over a multiprocessor system was considered. A program was analyzed whose structure permits the computation of the optimal static solution. Then four strategies for load balancing were described and their performance compared. The strategies are: (1) the optimal static assignment algorithm which is guaranteed to yield the best static solution, (2) the static binary dissection method which is very fast but sub-optimal, (3) the greedy algorithm, a static fully polynomial time approximation scheme, which estimates the optimal solution to arbitrary accuracy, and (4) the predictive dynamic load balancing heuristic which uses information on the precedence relationships within the program and outperforms any of the static methods. It is also shown that the overhead incurred by the dynamic heuristic is reduced considerably if it is started off with a static assignment provided by either of the other three strategies.

Iqbal, M. A.↗

A computer program for the calculation of the flow field including boundary layer effects for mixed-compression inlets at angle of attack

A computer program was developed which is capable of calculating the flow field in the supersonic portion of a mixed compression aircraft inlet operating at angle of attack. The supersonic core flow is computed using a second-order three dimensional method-of-characteristics algorithm. The bow shock and the internal shock train are treated discretely using a three dimensional shock fitting procedure. The boundary layer flows are computed using a second-order implicit finite difference method. The shock wave-boundary layer interaction is computed using an integral formulation. The general structure of the computer program is discussed, and a brief description of each subroutine is given. All program input parameters are defined, and a brief discussion on interpretation of the output is provided. A number of sample cases, complete with data listings, are provided.

Vadyak, J.↗

Plasma and magnetospheric research

Progress is reported in the development of programs for statistical analysis of boundary and structure type files based on surveys of Dynamics Explorere data. Programs being used for handling data on plasma boundaries in the inner magnetosphere, the structure of the plasmasphere, and the heavy ion torus may be useful for determining statistics on the warm plasma cloak and the auroral ion fountain. Data analysis and modeling; spacecraft sheath effects; and laboratory plasma flow studies are discussed.

Comfort, R. H.↗

Advanced fiber placement of composite fuselage structures

The Hercules/NASA Advanced Composite Technology (ACT) program will demonstrate the low cost potential of the automated fiber placement process. The Hercules fiber placement machine was developed for cost effective production of composite aircraft structures. The process uses a low cost prepreg tow material form and achieves equivalent laminate properties to structures fabricated with prepreg tape layup. Fiber placement demonstrations planned for the Hercules/NASA program include fabrication of stiffened test panels which represent crown, keel, and window belt segments of a typical transport aircraft fuselage.

Anderson, Robert L.↗