Search NASA⌕ Search

SEARCH · Search NASA

Results for “Support Structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Structure and Magnetic Properties of Pseudo-1D Chromium Thiolate Coordination Polymers

The synthesis, structure, and magnetic properties of two novel, pseudo-one-dimensional (1D) chromium thiolate coordination polymers (CPs), CrBTT and Cr2BDT3, are reported. The structures of these materials were determined using X-ray powder diffraction revealing highly symmetric 1D chains embedded within a CP framework. The magnetic coupling of this chain system was measured by SQUID magnetometry, revealing a switch from antiferromagnetic to ferromagnetic behavior dictated by the angular geometrical constraints within the CP scaffold consistent with the Goodenough–Kanamori–Anderson rules. Intrachain magnetic coupling constants J NN of –32.0 and +5.7 K were found for CrBTT and Cr 2 BDT 3 , respectively, using the 1D Bonner–Fisher model of magnetism. The band structure of these materials has also been examined by optical spectroscopy and density functional theory calculations revealing semiconducting behavior. Furthermore, our findings here demonstrate how CP scaffolds can support idealized low-dimensional structural motifs and dictate magnetic interactions through tuning of geometry and inter-spin couplings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nature of Ptn/TiO2(110) Interface under Water-Gas Shift Reaction Conditions: A Constrained ab Initio Thermodynamics Study

The electronic structure of small Ptn (n = 1-8) clusters supported on the stoichiometric and partially reduced rutile TiO2(110) surface have been investigated using density functional theory. Pt atoms prefer to form a close-packed structure with (111) facet near an oxygen vacancy of the TiO2 support and a less dense structure with (100) facet away from oxygen vacant sites. Themain focus of this study is on identifying a realistic catalyst model for the Pt/TiO2 interface under watergas shift (WGS) reaction conditions. Constrained ab initio thermodynamic simulations on the stability of oxygen vacancies and formation of adsorbed gas phase molecules such as oxygen, CO, and hydrogen at the metal/oxide interface reveal that under WGS reaction conditions the formation of surface oxygen vacancies are thermodynamically favorable, platinum oxide species (PtOx) can easily be reduced and should not be present, CO adsorbs only weakly on interfacial Pt atoms, and CO poisoning of these sites should be less important. While hydrogen generally interacts weakly with interfacial Pt atoms, it forms very stable hydride species on Pt atoms neighboring an oxygen vacancy of the TiO2(110) support, possibly negatively affecting the WGS reaction rate.

Environmental Molecular Sciences Laboratory↗

Continuous mutual improvement of macromolecular structure models in the PDB and of X-ray crystallographic software: the dual role of deposited experimental data

Macromolecular structures deposited in the PDB can and should be continually reinterpreted and improved on the basis of their accompanying experimental X-ray data, exploiting the steady progress in methods and software that the deposition of such data into the PDB on a massive scale has made possible. Accurate crystal structures of macromolecules are of high importance in the biological and biomedical fields. Models of crystal structures in the Protein Data Bank (PDB) are in general of very high quality as deposited. However, methods for obtaining the best model of a macromolecular structure from a given set of experimental X-ray data continue to progress at a rapid pace, making it possible to improve most PDB entries after their deposition by re-analyzing the original deposited data with more recent software. This possibility represents a very significant departure from the situation that prevailed when the PDB was created, when it was envisioned as a cumulative repository of static contents. A radical paradigm shift for the PDB is therefore proposed, away from the static archive model towards a much more dynamic body of continuously improving results in symbiosis with continuously improving methods and software. These simultaneous improvements in methods and final results are made possible by the current deposition of processed crystallographic data (structure-factor amplitudes) and will be supported further by the deposition of raw data (diffraction images). It is argued that it is both desirable and feasible to carry out small-scale and large-scale efforts to make this paradigm shift a reality. Small-scale efforts would focus on optimizing structures that are of interest to specific investigators. Large-scale efforts would undertake a systematic re-optimization of all of the structures in the PDB, or alternatively the redetermination of groups of structures that are either related to or focused on specific questions. All of the resulting structures should be made generally available, along with the precursor entries, with various views of the structures being made available depending on the types of questions that users are interested in answering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic structure and dynamics of the erupting solar polar crown prominence on 2012 March 12

We present an investigation of the polar crown prominence that erupted on 2012 March 12. This prominence is observed at the southeast limb by the Solar Dynamics Observatory (SDO)/Atmospheric Imaging Assembly (AIA; end-on view) and displays a quasi-vertical thread structure. A bright U-shaped or horn-like structure is observed surrounding the upper portion of the prominence at 171 Å before the eruption and becomes more prominent during the eruption. The disk view of STEREO-B shows that this long prominence is composed of a series of vertical threads and displays a half-loop-like structure during the eruption. We focus on the magnetic support of the prominence vertical threads by studying the structure and dynamics of the prominence before and during the eruption using observations from SDO and STEREO-B. We also construct a series of magnetic field models (sheared arcade model, twisted flux rope model, and unstable model with hyperbolic flux tube). Various observational characteristics appear to be in favor of the twisted flux rope model. We find that the flux rope supporting the prominence enters the regime of torus instability at the onset of the fast-rise phase, and signatures of reconnection (posteruption arcade, new U-shaped structure, rising blobs) appear about one hour later. During the eruption, AIA observes dark ribbons seen in absorption at 171 Å corresponding to the bright ribbons shown at 304 Å, which might be caused by the erupting filament material falling back along the newly reconfigured magnetic fields. Brightenings at the inner edge of the erupting prominence arcade are also observed in all AIA EUV channels, which might be caused by the heating due to energy released from reconnection below the rising prominence.

79 ASTRONOMY AND ASTROPHYSICS↗

Algorithms and file structures to enhance software workflows for ion mobility mass spectrometry (IM-MS)

Support customizations of algorithms and raw data file structures to enhance software workflows for liquid chromatography (LC), mass spectrometry (MS) and ion mobility mass spectrometry (IM-MS)-based metabolite characterization. Evaluate and improve the integration of ion mobility to existing MS analysis methods of the Mass Profiler Professional workflow (Mass Profiler, ID Browser and Mass Profiler Professional).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Shadow of the Future: Developing Trust and Software within the Exascale Computing Project

Collaboration and team science are emerging areas of interest in software production. Historically, multi-institutional research collaborations are difficult to initiate and maintain, negatively impacting communication, negotiation, and dialogue between industry, government, and academic researchers. The Exascale Computing Project (ECP), a massive, multi-team, high-stakes initiative, facilitated broader research collaboration under a shared funding structure and extended timeline to support scientific discovery. Here, we conducted interviews with ECP teams, representing a variety of domain specialties, research institutions, and programming backgrounds. Using thematic analysis, we assessed how ECP’s structure created an environment of increased trust among projects and how software shared between teams facilitated sustained collaboration. We found that the expectation of future collaboration, i.e., the shadow of the future, greatly enhanced trust among teams and the quality of scientific software produced. Based on our findings within ECP projects, we connect to the existing literature on trust in software engineering and share recommendations for sustainable multi-institutional collaboration and shared best software practices.

Exascale computing project↗

Exploration of non-resonant divertor features on the Compact Toroidal Hybrid

Abstract Non-resonant divertors (NRDs) separate the confined plasma from the surrounding plasma facing components (PFCs). The resulting striking field line intersection pattern on these PFCs is insensitive to plasma equilibrium effects. However, a complex scrape-off layer (SOL), created by chaotic magnetic topology in the plasma edge, connects the core plasma to the PFCs through varying magnetic flux tubes. The Compact Toroidal Hybrid (CTH) serves as a test-bed to study this by scanning across its inductive current. Simulations observe a significant change of the chaotic edge structure and an effective distance between the confined plasma and the instrumented wall targets. The intersection pattern is observed to be a narrow helical band, which we claim is a resilient strike line pattern. However, signatures of finger-like structures, defined as heteroclinic tangles in chaotic domains, within the plasma edge connect the island chains to this resilient pattern. The dominant connection length field lines intersecting the targets are observed via heat flux modeling with EMC3-EIRENE. At low inductive current levels, the excursion of the field lines resembles a limited plasma wall scenario. At high currents, a private flux region is created in the area where the helical strike line pattern splits into two bands. These bands are divertor legs with distinct SOL parallel particle flow channels. The results demonstrate the NRD strike line pattern resiliency within CTH, but also show the underlying chaotic edge structure determining if the configuration is diverted or limited. This work supports future design efforts for a mechanical structure for the NRD.

Physics↗

Structural and biochemical analyses of selectivity determinants in chimeric Streptococcus Class A sortase enzymes

Abstract Sequence variation in related proteins is an important characteristic that modulates activity and selectivity. An example of a protein family with a large degree of sequence variation is that of bacterial sortases, which are cysteine transpeptidases on the surface of gram‐positive bacteria. Class A sortases are responsible for attachment of diverse proteins to the cell wall to facilitate environmental adaption and interaction. These enzymes are also used in protein engineering applications for sortase‐mediated ligations (SML) or sortagging of protein targets. We previously investigated SrtA from Streptococcus pneumoniae , identifying a number of putative β7–β8 loop‐mediated interactions that affected in vitro enzyme function. We identified residues that contributed to the ability of S. pneumoniae SrtA to recognize several amino acids at the P1′ position of the substrate motif, underlined in LPXT G , in contrast to the strict P1′ Gly recognition of SrtA from Staphylococcus aureus . However, motivated by the lack of a structural model for the active, monomeric form of S. pneumoniae SrtA, here, we expanded our studies to other Streptococcus SrtA proteins. We solved the first monomeric structure of S. agalactiae SrtA which includes the C‐terminus, and three others of β7–β8 loop chimeras from S. pyogenes and S. agalactiae SrtA. These structures and accompanying biochemical data support our previously identified β7–β8 loop‐mediated interactions and provide additional insight into their role in Class A sortase substrate selectivity. A greater understanding of individual SrtA sequence and structural determinants of target selectivity may also facilitate the design or discovery of improved sortagging tools.

Gao, Melody↗

Storage and Read-Optimized Data Placement Structures for High-Performance Analysis [Book Chapter]

Here, we present state-of-art structures and methods for efficient data preparation and representation for analysis. Our intent is to introduce the data science and analytics communities to open source data placements, structures, and methods. These practices can make the foundational processes of data preparation and access dramatically more efficient than typical raw file or database representations and use more conservative storage. To illustrate this, we introduce two highly efficient data placement structures. We then present a tutorial, supported by step-by-step examples, of how to create, use, and access data, structured by Parquet or ORC (Optimized Row Columnar), using Apache Spark. Finally, we illustrate the benefits of using these structures with computational and storage volume benchmarks.

97 MATHEMATICS AND COMPUTING↗

Catalyst size and morphological effects on the interaction of NO 2 with BaO/γ-Al 2 O 3 materials

The capability of NO x storage on the supported BaO catalyst largely depends on the Ba loading. With different Ba loadings, the supported BaO component exposes various phases ranging from well-dispersed nanoclusters to large crystalline particles on the oxide support materials. In order to better understand size and morphological effects on NO x storage over γ-Al 2 O 3 -supported BaO materials, the adsorption structures and energetics of single NO 2 molecule, as well as NO x + NO y (NO 2 + NO 2 , NO + NO 3 and NO 2 + NO 3 ) pairs on the BaO/γ-Al 2 O 3 (1 0 0), (BaO)2/γ-Al 2 O 3 (1 0 0), and (BaO) 5 /γ-Al 2 O 3 (1 0 0) surfaces were investigated using first-principles density functional theory calculations. A single NO 2 molecule prefers to adsorb at basic OBa site forming anionic nitrate species. Upon adsorption, a charge redistribution in the supported (BaO) n clusters occurs. Synergistic effects due to the interaction of NO 2 with both the (BaO)n clusters and the γ-Al 2 O 3 (1 0 0) support enhance the stability of adsorbed NO 2 . The interaction between NO 2 and the (BaO) n /γ-Al 2 O 3 (1 0 0) catalysts was found to be markedly affected by the sizes and morphologies of the supported (BaO) n clusters. The adsorption energy of NO 2 increases from -0.98 eV on the BaO/γ-Al 2 O 3 (1 0 0) surface to -3.01 eV on (BaO) 5 /γ–Al 2 O 3 (1 0 0). NO 2 adsorption on (BaO) 2 clusters in a parallel configuration on the γ-Al 2 O 3 (1 0 0) surface is more stable than on dimers oriented in a perpendicular fashion. Similar to the bulk BaO(1 0 0) surface, a supported (BaO) n cluster-mediated electron transfer induces cooperative effects that dramatically increase the total adsorption energy of NO x + NO y pairs on the (BaO) n /γ-Al 2 O 3 (1 0 0) surfaces. Following the widely accepted NO 2 storage mechanism of BaO + 3NO 2 (g) → Ba(NO 3 ) 2 + NO(g), our thermodynamic analysis indicates that the largest energy gain for this overall process of NOx uptake is obtained on the amorphous monolayer-like (BaO) 5 /γ-Al 2 O 3 (1 0 0) surface. Finally, this suggests that γ-Al 2 O 3 -supported BaO materials with ~6–12 wt% loadings may provide optimum structures for NO x storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Network structure of vertebrate scavenger assemblages at the global scale: drivers and ecosystem functioning implications

The organization of ecological assemblages has important implications for ecosystem functioning, but little is known about how scavenger communities organize at the global scale. Here, we test four hypotheses on the factors affecting the network structure of terrestrial vertebrate scavenger assemblages and its implications on ecosystem functioning. We expect scavenger assemblages to be more nested (i.e. structured): 1) in species-rich and productive regions, as nestedness has been linked to high competition for carrion resources, and 2) regions with low human impact, because the most efficient carrion consumers that promote nestedness are large vertebrate scavengers, which are especially sensitive to human persecution. 3) We also expect climatic conditions to affect assemblage structure, because some scavenger assemblages have been shown to be more nested in colder months. Finally, 4) we expect more organized assemblages to be more efficient in the consumption of the resource. We first analyzed the relationship between the nestedness of the scavenger assemblages and climatic variables (i.e. temperature, precipitation, temperature variability and precipitation variability), ecosystem productivity and biomass (i.e. NDVI) and degree of human impact (i.e. human footprint) using 53 study sites in 22 countries across five continents. Then, we related structure (i.e. nestedness) with its function (i.e. carrion consumption rate). We found a more nested structure for scavenger assemblages in regions with higher NDVI values and lower human footprint. Moreover, more organized assemblages were more efficient in the consumption of carrion. However, our results did not support the prediction that the structure of the scavenger assemblages is directly related to climate. Our findings suggest that the nested structure of vertebrate scavenger assemblages affects its functionality and is driven by anthropogenic disturbance and ecosystem productivity worldwide. Disarray of scavenger assemblage structure by anthropogenic disturbance may lead to decreases in functionality of the terrestrial ecosystems via loss of key species and trophic facilitation processes.

54 ENVIRONMENTAL SCIENCES↗

GeV ion irradiation of NiFe and NiCo: Insights from MD simulations and experiments

Concentrated solid solution alloys have attracted rapidly increasing attention due to their potential for designing materials with high tolerance to radiation damage. To tackle the effects of chemical complexity in defect dynamics and radiation response, we present in this paper a computational study on swift heavy ion induced effects in Ni and equiatomic Ni -based alloys (Ni 50 Fe 50 , Ni 50 Co 50 ) using two-temperature molecular dynamics simulations (2T-MD). The electronic heat conductivity in the two-temperature equations is parameterized from the results of first principles electronic structure calculations. A bismuth ion (1.542 GeV) is selected and single impact simulations performed in each target. We study the heat flow in the electronic subsystem and show that alloying Ni with Co or Fe reduces the heat dissipation from the impact by the electronic subsystem. Simulation results suggest no melting or residual damage in pure Ni while a cylindrical region melts along the ion propagation path in the alloys. In Ni 50 Co 50 the damage consists of a dislocation loop structure (d = 2 nm) and isolated point defects, while in Ni 50 Fe 50 , a defect cluster (d = 4 nm) along the ion path is, in addition, formed. The simulation results are supported by atomic-level structural and defect characterizations in bismuth-irradiated Ni and Ni 50 Fe 50 . Finally, the significance of the 2T-MD model is demonstrated by comparing the results to those obtained with an instantaneous energy deposition model without consideration of e-ph interactions in pure Ni and by showing that it leads to a different qualitative behavior.

36 MATERIALS SCIENCE↗

Effect of 316 stainless steel powder processing conditions on microstructure

One parameter that has both economic and performance effects in the manufacturing of steel parts is the powder feedstock used. 316 L steel powder can be produced through water atomization or gas atomization, where both the powder size and the atomization process determine the cost of powder feedstock. Gas atomized powder is spherical and has a lower oxygen content than water atomized powder, making it the preferred choice for performance, but comes at a higher financial cost. Here, in this study, various 316 L powder batches are characterized to understand physical properties and microstructural variations. Density and flowability were determined using gas pycnometry and Hall flow tests. Powder morphology and porosity were qualitatively analyzed via optical microscopy and scanning electron microscopy, Finally, transmission electron microscopy was used to determine changes in phases present. Spherical gas atomized powder of 30–100 μm contained Mn$-$Si rich oxides both on the surface and within the matrix. Meanwhile, irregular water atomized powder 30 μm in diameter contained silicon oxides without manganese. All powder particles contained a nickel rich cellular structure which was shown to support the formation of additional phases. While literature has observed general microstructural features across 316 L powder particles, transmission electron microscopy (TEM) in this study has identified variations in precipitation and cell structures. Information regarding morphology, flowability, density, and phase distributions can be applied to understand variations in part consolidation, which will in turn show which powder aspects are significant for production.

Chemical segregation↗

Identifying Dynamic Structural Changes of Active Sites in Pt–Ni Bimetallic Catalysts Using Multimodal Approaches

Alloy nanoparticle catalysts are known to afford unique activities that can differ markedly from their parent metals, but there remains a generally limited understanding of the nature of their atomic (and likely dynamic) structures as exist in heterogeneously supported forms under reaction conditions. Notably unclear is the nature of their active sites and the details of the varying oxidation states and atomic arrangements of the catalytic components during chemical reactions. In this work, we describe multimodal methods that provide a quantitative characterization of the complex heterogeneity present in the chemical and electronic speciations of Pt–Ni bimetallic catalysts supported on mesoporous silica during the reverse water gas shift reaction. The analytical protocols involved a correlated use of in situ X-ray Absorption Spectroscopy (XAS) and Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS), complimented by ex-situ aberration corrected Scanning Transmission Electron Microscopy (STEM). The data reveal that complex reactions occur between the metals and support in this system under operando conditions. These reactions, and the specific impacts of strong metal–silica bonding interactions, prevent the formation of alloy phases containing Ni–Ni bonds. This feature of structure provides high activity and selectivity for the reduction of CO 2 to carbon monoxide without significant competitive levels of methanation. In conclusion, we show how these chemistries evolve to the active state of the catalyst: bimetallic nanoparticles possessing an intermetallic structure (the active phase) that are conjoined with Ni-rich, metal-silicate species.

36 MATERIALS SCIENCE↗

Rational Design of Hyperbranched Nanowire Systems for Tunable Superomniphobic Surfaces Enabled by Atomic Layer Deposition

A method for tunable control of geometry in hyperbranched ZnO nanowire (NW) systems is reported, which enables the rational design and fabrication of superomniphobic surfaces. Branched NWs with tunable density and orientation were grown via a sequential hydrothermal process, in which atomic layer deposition (ALD) was used for NW seeding, disruption of epitaxy, and selective blocking of NW nucleation. This approach allows for the rational design and optimization of three-level hierarchical structures, in which the geometric parameters of each level of hierarchy can be individually controlled. We demonstrate the coupled relationships between geometry and contact angle for a variety of liquids, which is supported by mathematical models of structural superomniphobicity. The highest performing superomniphobic surface was designed with three levels of hierarchy and achieved the following advancing/receding contact angles, water: 172°/170°, hexadecane: 166°/156°, octane: 162°/145°, and heptane: 160°/130°. Low surface tension liquids were shown to bounce off the surface from a height of 7 cm without breaking through and wetting. This approach demonstrates the power of ALD as an enabling technique for hierarchical materials by design, spanning the macro, micro, and nano length scales.

Environmental Molecular Sciences Laboratory↗

Tuning the Magnetic Exchange via a Control of Orbital Hybridization in Cr 2 ( Te 1 - x W x ) O 6

Here, we report the complex magnetic phase diagram and electronic structure of Cr 2 ( Te 1-x W x ) O 6 systems. While compounds with different x values possess the same crystal structure, they display different magnetic structures below and above x c = 0.7 , where both the transition temperature T N and sublattice magnetization (M s ) reach a minimum. Unlike many known cases where magnetic interactions are controlled either by injection of charge carriers or by structural distortion induced via chemical doping, in the present case it is achieved by tuning the orbital hybridization between Cr 3d and O 2p orbitals through W 5d states. The result is supported by ab initio electronic structure calculations. Through this concept, we introduce a new approach to tune magnetic and electronic properties via chemical doping.

Zhu, M.↗

RCSB protein data Bank: Next‐generation advanced search for exploration of experimental structures and computed structure models

Abstract The Protein Data Bank (PDB), established in 1971, is the primary global, open‐access archive for experimentally determined 3D macromolecular structures (proteins, RNA, DNA). The research‐focused RCSB.org web‐portal provides access to these data alongside more than one million machine‐learning‐predicted structure models, greatly expanding the available structural landscape. Rapid growth of both experimental and computational structures has increased the need for powerful yet accessible search tools that serve a broad and diverse scientific community. Herein, we describe a redesigned RCSB Protein Data Bank RCSB.org Advanced Search capability that supports intuitive discovery of 3D structures through a unified interface. This interface integrates annotation‐, sequence‐, and 3D structure‐based searches, embeds an interactive 3D viewer, and incorporates curated biological knowledge, such as catalytic site definitions from Mechanism and Catalytic Site Atlas and ligand‐guided structural motifs, for constructing geometry‐driven queries. A new Chemical Search tool allows definition of chemical queries via an integrated drawing tool or standard identifiers, seamlessly combining them with annotation filters. By allowing query definition directly within spatial and chemical contexts, these search interfaces reduce the need for detailed knowledge of residue numbering, chain identifiers, or external cheminformatics software. This capability enables efficient exploration of structures, chemical diversity, and structure–function relationships across all life domains. The redesigned interfaces can be accessed directly at rcsb.org/search/advanced for Advanced Search and rcsb.org/search/chemical for Chemical Search.

Rose, Yana [Research Collaboratory for Structural ↗

Enhanced high temperature performance of MgAl2O4-supported Pt-BaO lean NOx trap catalysts

The structural and chemical characteristics of Pt/BaO lean-NO{sub x} trap (LNT) catalysts supported on {gamma}-Al{sub 2}O{sub 3} and MgAl{sub 2}O{sub 4} are compared in this study. The Pt-BaO/MgAl{sub 2}O{sub 4} sample shows relatively low NO{sub x} uptake at temperatures below 300 C, and the temperature of maximum NO{sub x} uptake (T{sub max}) is shifted to 350 C in comparison to that of Pt-BaO/Al{sub 2}O{sub 3} (T{sub max} {approx}250 C). More importantly, the NO{sub x} uptake over the MgAl{sub 2}O{sub 4}-supported catalyst at 350 C is twice that of the alumina-based one. The shift toward the higher temperature NO{sub x} uptake is explained by the larger interfacial area between Pt and BaO, due to smaller Pt clusters as evidenced by TEM and Pt L3 EXAFS. In situ TR-XRD results demonstrate that the formation of a BaAl{sub 2}O{sub 4} phase in the BaO/MgAl{sub 2}O{sub 4} LNT catalyst occurs at a temperature about 100 C higher than on BaO/Al{sub 2}O{sub 3}, which may also represent a beneficial attribute of the BaO/MgAl{sub 2}O{sub 4} LNT with respect to catalyst stability.

36 MATERIALS SCIENCE↗