SEARCH · Search NASA

Results for “WELDING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

All sources NASA NTRS DOE OSTI

NASA NTRS1989

Heat sink effects on weld bead: VPPA process

An investigation into the heat sink effects due to weldment irregularities and fixtures used in the variable polarity plasma arc (VPPA) process was conducted. A basic two-dimensional model was created to represent the net heat sink effect of surplus material using Duhamel's theorem to superpose the effects of an infinite number of line heat sinks of variable strength. Parameters were identified that influence the importance of heat sink effects. A characteristic length, proportional to the thermal diffusivity of the weldment material divided by the weld torch travel rate, correlated with heat sinking observations. Four tests were performed on 2219-T87 aluminum plates to which blocks of excess material were mounted in order to demonstrate heat sink effects. Although the basic model overpredicted these effects, it correctly indicated the trends shown in the experimental study and is judged worth further refinement.

Steranka, Paul O., Jr.↗

NASA NTRS1990

Heat sink effects on weld bead: VPPA process

Steranka, Paul O., Jr.↗

NASA NTRS1991

Alignment Tool For Inertia Welding

Compact, easy-to-use tool aligns drive bar of inertia welder over hole in stub. Ensures drive bar concentric to hole within 0.002 in. (0.051 mm.). Holds two batteries and light bulb. Electrical circuit completed, providing current to bulb when pin in contact with post. When pin centered in post hole, it does not touch post, and lamp turns off. Built for use in making repair welds on liquid-oxygen-injector posts in Space Shuttle main engine. Version having suitably modified dimensions used to facilitate alignment in other forests of post.

Snyder, Gary L.↗

NASA NTRS1991

A Compact Gas/Tungsten-Arc Welding Torch

Compact gas/tungsten-arc welding torch delivers 100-A current, yet used in confined spaces inaccessible to even smallest commercially available torch. Despite its extremely small size, torch contains all usual components and delivers high current.

Morgen, Gene E.↗

NASA NTRS1991

Plasma-Arc Torch For Welding Ducts In Place

Plasma-arc-welding torch redesigned, more suitable for applications in which moved in circular or other orbits about stationary cylindrical workpieces. Preserves elements of original design critical to performance and endurance, but modifies other elements to decrease overall size of torch. Electrode collet and collet nut installed and removed through hole in top; makes installation and removal easier.

Gangl, Kenneth J.↗

NASA NTRS1991

Plate and butt-weld stresses beyond elastic limit, material and structural modeling

Ultimate safety factors of high performance structures depend on stress behavior beyond the elastic limit, a region not too well understood. An analytical modeling approach was developed to gain fundamental insights into inelastic responses of simple structural elements. Nonlinear material properties were expressed in engineering stresses and strains variables and combined with strength of material stress and strain equations similar to numerical piece-wise linear method. Integrations are continuous which allows for more detailed solutions. Included with interesting results are the classical combined axial tension and bending load model and the strain gauge conversion to stress beyond the elastic limit. Material discontinuity stress factors in butt-welds were derived. This is a working-type document with analytical methods and results applicable to all industries of high reliability structures.

Verderaime, V.↗

NASA NTRS1991

Investigation of welding and brazing of molybdenum and TZM alloy tubes

This effort involved investigating the welding and brazing techniques of molybdenum tubes to be used as cartridges in the crystal growth cartridge. Information is given in the form of charts and photomicrographs. It was found that the recrystallization temperature of molybdenum can be increased by alloying it with 0.5 percent titanium and 0.1 percent zirconium. Recrystallization temperatures for this alloy, known as TZM, become significant around 2500 F. A series of microhardness tests were run on samples of virgin and heat soaked TZM. The test results are given in tabular form. It was concluded that powder metallurgy TZM may be an acceptable cartridge material.

Lundblad, Wayne E.↗

NASA NTRS1990

Eddy-current inspection of shuttle heat exchanger tube welds

The goal of this project was to develop the system necessary to demonstrate in the laboratory that an eddy current system can inspect the tubes and welds described, screening for the existence of flaws equal in size to, or larger than, the target flaw. The laboratory system was to include the probe necessary to traverse the tubing, the electronics to drive (i.e., electrically excite) the probe and receive and process signals from it, a data display, data recording, and playback devices, and microprocessor software or firmware necessary to operate the system.

Dodd, Casius V.↗

NASA NTRS1991

Effects of varying subatmospheric pressure on stationary plasma arc welds

An experimental study was performed examining the variation of penetration, fluid behavior, heat-affected zone and arc in plasma arc welding (PAW) with respect to subatmospheric ambient pressure. The results reveal nonlinear variation of keyhole size, time of penetration, and size of the heat-affected zone with pressure. In a restricted range of pressure, dynamic components of fluid flow directed out of the molten pool appear and have a profound effect on keyhole formation. The generated plasma arc is observed to decrease in intensity with decreasing pressure, resulting in a reduction of penetration at lower pressures.

Chin, J. J.↗

NASA NTRS1990

Dynamic control of robotic welding - On-going research

Two major challenges exist for the development of dynamic control systems: first, the control system must be resourceful enough to provide problem-solving capabilities in unforeseen circumstances; second, it must be rapid enough to respond to dynamic environments. Most conventional control systems do not have the ability to 'step back' and problem-solve, especially in environments with incomplete and uncertain models and data. Orthogonally, commercially available AI systems usually do not respond at the rates required to support 'real-time' control. Hence, control systems are not available that respond to complex dynamic environments within appropriate time constraints. This paper describes work on an AI-based control system designed to address these challenges. A prototype system has been used, in a simulated environment, to control the robotic welding of aerospace components. This AI-based control system has demonstrated the ability to flexibly control a complex process within required time constraints by incorporating higher level reasoning and the ability to deal with uncertainty. Further work is in progress to expand the system's problem-solving capabilities.

Ruokangas, Corinne C.↗

NASA NTRS1990

Holographic analysis as an inspection method for welded thin-wall tubing

The feasibility of using holographic interferometry for locating flaws in welded tubing is explored. Two holographic techniques are considered: traditional holographic interferometry and electronic speckle pattern interferometry. Several flaws including cold laps, discontinuities, and tube misalignments are detected.

Brooks, Lawrence↗

NASA NTRS1992

Cheaper Custom Shielding Cups For Arc Welding

New way of making special-purpose shielding cups for gas/tungsten arc welding from hobby ceramic greatly reduces cost. Pattern machined in plastic. Plaster-of-paris mold made, and liquid ceramic poured into mold. Cost 90 percent less than cup machined from lava rock.

Morgan, Gene E.↗

NASA NTRS1992

Elastic And Plastic Deformations In Butt Welds

Report presents study of mathematical modeling of stresses and strains, reaching beyond limits of elasticity, in bars and plates. Study oriented toward development of capability to predict stresses and resulting elastic and plastic strains in butt welds.

Verderaime, V.↗

NASA NTRS1991

Characterization of the corrosion resistance of biologically active solutions: The effects of anodizing and welding

An understanding of fabrication processes, metallurgy, electrochemistry, and microbiology is crucial to the resolution of microbiologically influenced corrosion (MIC) problems. The object of this effort was to use AC impedance spectroscopy to characterize the corrosion resistance of Type II anodized aluminum alloy 2219-T87 in sterile and biologically active media and to examine the corrosion resistance of 316L, alloy 2219-T87, and titanium alloy 6-4 in the welded and unwelded conditions. The latter materials were immersed in sterile and biologically active media and corrosion currents were measured using the polarization resistance (DC) technique.

Walsh, Daniel W.↗

NASA NTRS1991

Applying NASA's explosive seam welding

The status of an explosive seam welding process, which was developed and evaluated for a wide range of metal joining opportunities, is summarized. The process employs very small quantities of explosive in a ribbon configuration to accelerate a long-length, narrow area of sheet stock into a high-velocity, angular impact against a second sheet. At impact, the oxide films of both surface are broken up and ejected by the closing angle to allow atoms to bond through the sharing of valence electrons. This cold-working process produces joints having parent metal properties, allowing a variety of joints to be fabricated that achieve full strength of the metals employed. Successful joining was accomplished in all aluminum alloys, a wide variety of iron and steel alloys, copper, brass, titanium, tantalum, zirconium, niobium, telerium, and columbium. Safety issues were addressed and are as manageable as many currently accepted joining processes.

Bement, Laurence J.↗

NASA NTRS1992

Microwelding (or cold-welding) of various metallic materials under the ultra-vacuum LDEF experiment AO 138-10

The FRECOPA experimentation, as part of the Long Duration Exposure Facility (LDEF) mission, of mechanical and electrical parts of spacecraft in space ultra-vacuum has demonstrated freedom from any cold welding including microweld effects. This, as theorized, is due to integrity in space of the earthly grown oxygen layer. A further experimentation, a dynamic one this time, could provide a wealth of scientific data, yielding reliable material selecting criteria.

Assie, Jean-Pierre↗

NASA NTRS1991

Welding of the superfluid helium on-orbit transfer (SHOOT) Flight Demonstration tanks and hardware

The SHOOT Flight Demonstration will provide the technology necessary to resupply superfluid helium in space. The helium dewars in SHOOT have unique requirements, including no detectable leaks, demonstrated structural integrity to allow flight aboard the Space Shuttle, and low parasitic heat leak. The requirements, materials, and processes used to fabricate the two superfluid helium dewars, particularly as they apply to welding, are presented.

Mcclure, Sidney↗

NASA NTRS1993

Welding Wires To Thin Thermocouple Films

Parallel-gap resistance welding yields joints surviving temperatures of about 1,000 degrees C. Much faster than thermocompression bonding. Also exceeds conductive-paste bonding and sputtering thin films through porous flame-sprayed insulation on prewelded lead wires. Introduces no foreign material into thermocouple circuit and does not require careful control of thickness of flame-sprayed material.

Holanda, Raymond↗