Search NASA⌕ Search

SEARCH · Search NASA

Results for “X ray diffraction analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Unraveling the convoluted and dynamic interphasial mechanisms on Li metal anode

Accurate understanding of the chemistry of solid-electrolyte interphase (SEI) is key to developing new electrolytes for high-energy batteries using lithium metal (Li-0) anodes(1). SEI is generally believed to be formed by the reactions between Li-0 and electrolyte(2,3). However, our new study shows this is not the whole story. Through synchrotron-based X-ray diffraction and pair distribution function analysis, we reveal a much more convoluted formation mechanism of SEI, which receives considerable contributions from electrolyte, cathode, moisture and native surface species on Li-0, with highly dynamic nature during cycling. Using isotope labelling, we traced the origin of LiH to electrolyte solvent, moisture and a new source: the native surface species (LiOH) on pristine Li-0. When lithium accessibility is very limited as in the case of anode-free cells, LiOH develops into plate-shaped large crystals during cycling. Alternatively, when the lithium source is abundant, as in the case of Li||NMC811 cells, LiOH reacts with Li-0 to form LiH and Li2O. While the desired anion-derived LiF-rich SEI is typically found in the concentrated electrolytes or their derivatives, we found it can also be formed in low-concentration electrolyte via the crosstalk effect, emphasizing the importance of formation cycle protocol and opening up opportunities for low-cost electrolyte development.

Polzin, Bryant J.↗

Cobalt Oxide on N-Doped Carbon for 1-Butene Oligomerization to Produce Linear Octenes

Cobalt oxide supported on N-doped carbon catalysts were investigated for 1-butene oligomerization. The materials were synthesized by treating activated carbon with nitric acid and subsequently with NH3 at 200, 400, 600, and 800 °C, followed by impregnation with cobalt. The 1-butene oligomerization selectivity increased with ammonia treatment temperature of the carbon support. The oligomerization selectivity of cobalt oxide on N-doped carbon synthesized at 800 °C (800A-CoOx/N-C) is 2.6 times higher than previously reported cobalt oxide on N-doped carbon synthesized with NH 4 OH (2A-CoOx/N-C). Over 70% of the butene dimers were linear C8 olefins for all catalysts. The oligomerization selectivity increased with 1-butene conversion. The catalysts were characterized by elemental analysis, N2 adsorption, X-ray diffraction (XRD), X-ray absorption spectroscopy (XAS), and X-ray photoelectron spectroscopy (XPS). The nitrogen content of the catalysts increases with ammonia treatment temperature as confirmed by elemental analysis. The surface content of pyridinic nitrogen with a binding energy of 398.4 ± 0.1 eV increased with ammonia treatment temperature as evidenced by deconvolution of N 1s XPS spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, Crystal Structure, Hirshfeld Surface Analysis, DFT, and DNA-Binding Studies of (E)-2-(3-Hydroxy-4-Methoxybenzylidene)Hydrazinecarbothioamide

(E)-2-(3-Hydroxy-4-methoxybenzylidene)hydrazinecarbothioamide 3 was synthesized by reacting thiosemicarbazide with 2-hydorxy-3-methoxybenzaldehyde in dry ethanol. The structure was elucidated by spectroscopic (FT-IR, {sup 1}H NMR, and {sup 13}C NMR) and single crystal X-ray diffraction techniques. A detailed analysis of the intermolecular interactions has been performed based on the Hirshfeld surfaces and their associated two-dimensional fingerprint plots. DFT, spectroscopic, and electrochemical DNA-binding analysis confirmed that the compound is reactive to bind with DNA. Viscometric studies suggested that compound 3 has a mixed mode of interaction and intercalated into the DNA base pairs predominantly along with the possibility of electrostatic interactions. .

60 APPLIED LIFE SCIENCES↗

Crystal structure and Eu{sup 3+}/Tb{sup 3+} doped luminescent properties of a new borate Ba{sub 3}BiB{sub 9}O{sub 18}

Undoped and doped either by Eu{sup 3+} or Tb{sup 3+} bismuth borate Ba{sub 3}BiB{sub 9}O{sub 18} was structurally characterized and analyzed by fluorescence spectroscopy. Belonging to synthetic borate member of the family Ba{sub 3}XB{sub 9}O{sub 18}, layers of planar triangular B{sub 3}O{sub 6} groups connecting with deformed BaO{sub 6} hexagons are interleaved by 9-coordinate Ba atoms, and 6-coordinate Bi atoms. Its crystal structure was determined and refined from powder X-ray diffraction data by the Rietveld method and the results showed that Ba{sub 3}BiB{sub 9}O{sub 18} belongs to space group P6{sub 3}/m with unit cell dimensions of a = 7.1999(2) A, c = 17.3567(6) A, and z = 2. Curves of differential thermal analysis and thermogravimetric analysis showed that Ba{sub 3}BiB{sub 9}O{sub 18} is a congruent melting compound and chemically stable above 728 {sup o}C. Ba{sub 3}Bi{sub 1-x}Eu{sub x}B{sub 9}O{sub 18} and Ba{sub 3}Bi{sub 1-x}Tb{sub x}B{sub 9}O{sub 18} form a continuous solid solution from x = 0.01 to x = 0.9. The ultraviolet excited photoluminescence intensity increased with both Eu{sup 3+} and Tb{sup 3+} concentration in the matrix of Ba{sub 3}BiB{sub 9}O{sub 18}. There may be an interesting correlation between spectroscopic properties and lattice structural features of doped Ba{sub 3}BiB{sub 9}O{sub 18}.

36 MATERIALS SCIENCE↗

Synthesis of nanocrystalline yttrium iron garnet by low temperature solid state reaction

In this work, nanocrystalline yttrium iron garnet powders were produced by low temperature solid state reaction. The phase evolution during the procedure was determined from the thermogravimetric and differential thermal analysis, and the x-ray diffraction patterns. The results of transmission electron microscopy indicated that the prepared powders exhibited grain size at the nano-level of 20 {approx} 40 nm. Dense ceramics with a theoretical density of around 98% were obtained from the prepared powders after sintering at 1280 deg. C, a relative low sintering temperature compared with conventional ceramic processes, and the saturation magnetizations of sintered samples were also determined. - Research Highlights: {yields}No sol or gel form during the synthesis processing using nitrates and citric acid as raw materials. {yields}The synthesis method needs a low heating temperature (700 deg. C) compared with conventional solid state reaction. {yields}The product is a single phase with homogeneous size distribution and nano grains (20 {approx} 40 nm) confirmed by TEM. {yields}Dense YIG ceramic can be sintered at a low temperature (1280 deg. C) compared with that in conventional processing.

36 MATERIALS SCIENCE↗

Enhanced Curie temperature and piezoelectric properties of (Ba0.85Ca0.15)(Zr0.10Ti0.90)O3 lead-free ceramics after the addition of LiTaO3

Highlights: • The Curie temperature and piezoelectric properties of BCZT ceramics can be obviously enhanced by the addition of LiTaO{sub 3}. • The Curie temperature of (Ba{sub 0.85}Ca{sub 0.15})(Zr{sub 0.10}Ti{sub 0.90})O{sub 3} ceramics improved from 93 ℃ to 102 ℃. • (Ba{sub 0.85}Ca{sub 0.15})(Zr{sub 0.10}Ti{sub 0.90})O{sub 3} ceramic with x = 0.3 mol.% LiTaO{sub 3} demonstrates optimal piezoelectric properties. • The giant electrostrictive coefficients (Q{sub 33} ≈ 0.040-0.050 m{sup 4}/C{sup 2}) were also obtained in LT-doped BCZT ceramics. - Abstract: Polycrystalline (Ba{sub 0.85}Ca{sub 0.15})(Zr{sub 0.10}Ti{sub 0.90})O{sub 3}–xLiTaO{sub 3} ceramics were designed and synthesized using a solid-state reaction to improve both the Curie temperature and the electrical properties of (Ba{sub 0.85}Ca{sub 0.15})(Zr{sub 0.10}Ti{sub 0.90})O{sub 3} lead-free piezoelectric ceramics. The effect that the addition of LiTaO{sub 3} has on the structure and electrical properties of BCZT ceramics was studied systemically. The results show that the Curie temperature and the piezoelectric properties of BCZT can be substantially enhanced by adding LiTaO{sub 3.} The Curie temperature increased from 93 °C to 102 °C after adding LT of 0.3 mol.%. X-ray diffraction and Raman spectral analysis of the ceramics reveal the coexistence of orthorhombic (O) and tetragonal (T) phases. This coexistence of O and T phases at room temperature helps improve the ferroelectric and piezoelectric properties. The ceramic with x = 0.3 mol.% exhibits the highest values for d{sub 33} = 433 pC/N, d{sub 33}{sup *} = 858 pm/V (at 1 kV/mm) and k{sub p} = 44.6%. Furthermore, giant electrostrictive coefficients (Q{sub 33} ≈ 0.040–0.050 m{sup 4}/C{sup 2}) were also obtained for these LT-doped BCZT ceramics. These properties confirm that BCZT-xLT is a promising candidate system for lead-free piezoelectric ceramic materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optoelectronic and low temperature thermoelectric studies on nanostructured thin films of silver gallium selenide

Polycrystalline thin films of silver gallium selenide were deposited on ultrasonically cleaned soda lime glass substrates by multi-source vacuum co-evaporation technique. The structural analysis done by X-ray diffraction ascertained the formation of nano structured tetragonal chalcopyrite thin films. The compound formation was confirmed by X-ray photo-electron spectroscopy. Atomic force microscopic technique has been used for surface morphological analysis. Direct allowed band gap ∼1.78eV with high absorption coefficient ∼10{sup 6}/m was estimated from absorbance spectra. Low temperature thermoelectric effects has been investigated in the temperature range 80–330K which manifested an unusual increase in Seebeck coefficient with negligible phonon drag toward the very low and room temperature regime. The electrical resistivity of these n-type films was assessed to be ∼2.6Ωm and the films showed good photo response.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterisation of titanium-titanium boride composites processed by powder metallurgy techniques

In this work, a detailed characterisation of titanium-titanium boride composites processed by three powder metallurgy techniques, namely, hot isostatic pressing, spark plasma sintering and vacuum sintering, was conducted. Two composites with different volume percents of titanium boride reinforcement were used for the investigation. One was titanium with 20% titanium boride, and the other was titanium with 40% titanium boride (by volume). Characterisation was performed using X-ray diffraction, electron probe micro analysis - energy dispersive spectroscopy and wavelength dispersive spectroscopy, image analysis and scanning electron microscopy. The characterisation results confirm the completion of the titanium boride reaction. The results reveal the presence of titanium boride reinforcement in different morphologies such as needle-shaped whiskers, short agglomerated whiskers and fine plates. The paper also discusses how mechanical properties such as microhardness, elastic modulus and Poisson's ratio are influenced by the processing techniques as well as the volume fraction of the titanium boride reinforcement. - Highlights: Black-Right-Pointing-Pointer Ti-TiB composites were processed by HIP, SPS and vacuum sintering. Black-Right-Pointing-Pointer The completion of Ti-TiB{sub 2} reaction was confirmed by XRD, SEM and EPMA studies. Black-Right-Pointing-Pointer Hardness and elastic properties of Ti-TiB composites were discussed. Black-Right-Pointing-Pointer Processing techniques were compared with respect to their microstructure.

36 MATERIALS SCIENCE↗

Phase relations and crystal structures in the system Ce-Ni-Zn at 800 Degree-Sign C

Phase relations have been established for the system Ce-Ni-Zn in the isothermal section at 800 Degree-Sign C using electron microprobe analysis and X-ray powder diffraction. Phase equilibria at 800 Degree-Sign C are characterized by a large region for the liquid phase covering most of the Ce-rich part of the diagram, whereas a Zn-rich liquid is confined to a small region near the Zn-corner of the Gibbs triangle. Whereas solubility of Ce in the binary Ni-Zn phases is negligible, mutual solubilities of Ni and Zn at a constant Ce content are large at 800 Degree-Sign C for most Ce-Zn and Ce-Ni compounds. The solid solution Ce(Ni{sub 1-x}Zn{sub x}){sub 5} with the CaCu{sub 5}-type is continuous throughout the entire section and for the full temperature region from 400 to 800 Degree-Sign C. Substitution of Zn by Ni is found to stabilize the structure of CeZn{sub 11} to higher temperatures. At 800 Degree-Sign C Ce(Ni{sub x}Zn{sub 1-x}){sub 11} (0.03{<=}x{<=}0.22) appears as a ternary solution phase. Similarly, a rather extended solution forms for Ce{sub 2}(Ni{sub x}Zn{sub 1-x}){sub 17} (0{<=}x{<=}0.53). Detailed data on atom site occupation and atom parameters were derived from X-ray structure analyses for single crystals of Ce{sub 2+y}(Ni{sub x}Zn{sub 1-x}){sub 17}, y=0.02, x=0.49 (a=0.87541(3), c=1.25410(4) nm; Th{sub 2}Zn{sub 17} type with space group R3{sup Macron }m,R{sub F{sup 2}}=0.018) and Ce(Ni{sub 0.18}Zn{sub 0.82}){sub 11} (a=1.04302(2), c=0.67624(3)nm, BaCd{sub 11} type with space group I4{sub 1}/amd, R{sub F{sup 2}}=0.049). - Graphical abstract: Ce-Ni-Zn isothermal section at 800 Degree-Sign C. Highlights: Black-Right-Pointing-Pointer Phase relations were determined for the system Ce-Ni-Zn in the section at 800 Degree-Sign C. Black-Right-Pointing-Pointer A continuous solid solution Ce(Ni{sub 1-x}Zn{sub x}){sub 5}, 0{<=}x{<=}1, forms between 400 and 800 Degree-Sign C. Black-Right-Pointing-Pointer Zn/Ni substitution stabilizes the ternary phase Ce(Zn{sub 1-x}Ni{sub x}){sub 11}, 0.03{<=}x{<=}0.22, 800 Degree-Sign C. Black-Right-Pointing-Pointer An extended solution forms for Ce{sub 2}(Ni{sub x}Zn{sub 1-x}){sub 17} (0{<=}x{<=}0.53). Black-Right-Pointing-Pointer Crystal data are given: Ce{sub 2+y}(Ni{sub x}Zn{sub 1-x}){sub 17} (Th{sub 2}Zn{sub 17}), Ce(Ni{sub 0.18}Zn{sub 0.82}){sub 11} (BaCd{sub 11}).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physicochemical characterizations of nano-palm oil fuel ash

Palm Oil Fuel Ash (POFA) is known as a good supplementary cementing material due to its siliceous-rich content. The application of nanotechnology in the pozzolanic materials could invent new functions in the efficiency of physical and chemical properties of materials. Thus, the present study aims to generate nano-sized POFA and characterize the physicochemical properties of nano-palm oil fuel ash (nPOFA). The nPOFA was prepared by mechanically grinding micro POFA using a high intensity ball milling for 6 hours. The physicochemical properties of nPOFA were characterized via X-Ray Fluoresence (XRF), Scanning Emission microscopy- Energy Dispersive X-Ray (SEM-EDX), Transmission Electron Microscope (TEM) and X-Ray Diffraction (XRD). The particle size of nPOFA acquired from TEM analysis was in the range of 20 nm to 90 nm, while the average crystallite size calculated from XRD diffractogram was 61.5 nm. The resulting nPOFA has a BET surface area of 145.35 m{sup 2}/g, which is more than 85% increment in surface area compared to micro-sized POFA. The morphology and elemental studies showed the presence of spherical as well as irregularly shaped and fine nPOFA particles contains with high silicon content. The presence of α-quartz as the major phase of the nPOFA was identified through XRD analysis. The study concludes that nPOFA has the potential as a supplementary cementing material due to the high silica content, high surface area and the unique behaviors of nano-structured particles.

36 MATERIALS SCIENCE↗

Interaction of Methane with Calcium Ferrite in the Chemical Looping Partial Oxidation Application: Experimental and DFT Study

In this study, experimental studies using mass spectroscopy, thermogravimetric analysis, in situ X-ray diffraction (XRD), and theoretical density functional theory calculations were carried out to investigate the mechanism of methane partial oxidation over a CaFe 2 O 4 oxygen carrier. The XRD analysis revealed the formation of the calcium ferrite phases during methane reduction occurred in the sequence CaFe 2 O 4 →CaFe 3 O 5 + Ca 2 Fe 2 O 5 →FeO + Fe + CaO→Fe + CaO. Each of these phases was modeled using periodic density functional theory to study the activity of these phases for the reactivity with CH 4 , CO, and H 2 along with the adsorbed surface species to help elucidate the effect that phase changes during reduction have on the chemical looping products CO and H 2 . Mass spectroscopic analysis revealed the formation of H 2 O and CO 2 occurred prior to the formation of CO and H 2 , and these products may be due to the removal of lattice oxygen bound in the discrete primary phase, which contributes to a small portion (~16%) of the total transferable oxygen in the solid. The density functional theory (DFT) results suggest that the gaseous CO and H 2 are not thermodynamically favorable to react with the Ca 2 Fe 2 O 5 where the release of CO and H 2 led to an increase in selectivity for these products. The DFT results suggest that some of the adsorbed atomic hydrogen combined to form adsorbed H 2 and then gaseous H 2 on the CaFe 2 O 4 surface, while the carbon deposition and some adsorbed atomic hydrogen react to form the CaFe 3 O 5 and Ca 2 Fe 2 O 5 phases simultaneously. DFT simulations suggest that both the gaseous H 2 and adsorbed atomic H are less thermodynamically favorable to drive the deep reduction of Ca 2 Fe 2 O 5 to CaO and Fe0. The deep reduction of the calcium ferrite therefore favors the generation of syngas products (CO and H 2 ) through mechanisms of methane dehydrogenation and selective oxidation of carbon to CO. The significant difference in mechanisms for partial oxidation of methane to syngas with the CaFe 2 O 4 carrier can be correlated to the differences in the oxide phases present during the reduction process, concentration of oxygen species, and bonding in the lattice structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of silica-enriched cement-based materials with improved aging resistance for application in high-temperature environments

Understanding the effects of high temperature (HT) and high pressure (HP) conditions on the microstructure of cement-based materials is critical to the construction and safe operation of deep oil and gas wells. Under such conditions, the persistence of calcium-silicate-hydrate (C-S-H) gel is compromised by ongoing crystallization that, if not controlled, may adversely affect the durability of the cement sheath. This work investigates the effect of silica content >35% by-weight-of-cement (BWOC), silica particle size, and solid volume fraction (SVF) on the microstructure and phase composition of cement-silica blends cured hydrothermally at 200 °C and 20.7 MPa. The results of X-ray diffraction and electron microprobe analysis revealed significant impact of these three mix design parameters on the final phase assembly, and on the conversion rate of semi-crystalline C-S-H to gyrolite and 11 Åtobermorite. Incorporation of more fine siliceous material suppressed dissolution of coarse silica particles, resulting in a matrix with improved homogeneity and dominated by fine gel pores. Mixes with lower SVF showed greater formation of 11 Å tobermorite, a higher degree of crystallinity and/or greater crystallite size. Prolonged HTHP curing of all systems (up to three months in this study), irrespective of the initial SVF, increased the fraction of capillary pores, indicating void coalesce caused by crystal growth. However, we find that this coarsening is less pronounced in systems with less pore space available for crystallization.

36 MATERIALS SCIENCE↗

Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash

The effect of minor additions of limestone powder on the properties of fly ash blended cements was investigated in this study using isothermal calorimetry, thermogravimetry (TGA), X-ray diffraction (XRD), scanning electron microscopy (SEM) techniques, and pore solution analysis. The presence of limestone powder led to the formation of hemi- and monocarbonate and to a stabilisation of ettringite compared to the limestone-free cements, where a part of the ettringite converted to monosulphate. Thus, the presence of 5% of limestone led to an increase of the volume of the hydrates, as visible in the increase in chemical shrinkage, and an increase in compressive strength. This effect was amplified for the fly ash/limestone blended cements due to the additional alumina provided by the fly ash reaction.

36 MATERIALS SCIENCE↗

The “quiet Goldschmidt”—a mechanochemical, thermoanalytical, and spectroscopic study of selected steps of the aluminothermic reaction

The Goldschmidt reaction (2Al+α-Fe{sub 2}O{sub 3}) was investigated both under mechanical and thermal activation by employing a combination of analytical methods such as ESR and Mössbauer spectroscopy, magnetic susceptibility, X-ray powder diffraction, and thermal analysis (TA). Both the mechanical treatment and the TA runs under air caused the reaction conditions of “quiet redox reactions” due to a retarding effect and enabled a reaction study in a “slow motion mode”. This allowed to establish distinct partial steps of the integral reaction process depending on the intensity of the mechanical impact, the educt composition, the gas phase composition, and, finally, the thermal excitation in the TA runs. Particular attention was payed to the role of the gas phase and to the reaction of aluminum with differently activated oxygen species. The phlegmatizing effect was traced back to the formation of Al{sub 2}O{sub 3} coverages of the Al particles. - Highlights: • The usually extremely violent Goldschmidt reaction was studied in a “slow motion mode”. • Both the mechanochemical and the thermal treatment caused a phlegmatizing effect on the reaction. • Early reaction stages were sensitively indicated by ESR and magnetic measurements. • Intermediates and final products were characterized by XRD and Mössbauer data. • Differently activated oxygen species react with aluminum to form an oxide coverage retarding the vigorous reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heteropolytungstate nanoparticles: Microemulsion-mediated preparation and investigation of their catalytic activity in the epoxidation of olefins

Highlights: • Keggin type Q{sub 3}PW{sub 12}O{sub 40} nanoparticles were synthesized by using microemulsion system. • The nanoparticles have uniform size of about 25 nm and spherical morphologies. • The prepared nanoparticles act as reusable catalyst in the epoxidation of olefins with H{sub 2}O{sub 2}. - Abstract: Keggin type Q{sub 3}PW{sub 12}O{sub 40} nanoparticles (Q = cetyltrimethylammonium cation) were synthesized in water-in-oil (w/o) microemulsion consisted of water/cetyltrimethylammonium bromide/n-butanol/isooctane. Reaction of Na{sub 2}WO{sub 4}, Na{sub 2}HPO{sub 4} and hydrochloric acid within water containing nanoreactors of reverse micelles resulted in the preparation of Q{sub 3}PW{sub 12}O{sub 40} nanoparticles. The resultant nanoparticles were analyzed by physicochemical methods such as FT-IR spectroscopy, X-ray diffraction, energy-dispersive X-ray analysis, thermogravimetric analyses (TGA-DTA), scanning and transmission electron microscopy and atomic force microscopy which show nearly uniform spherical nanoparticles with size of about 15 nm. Finally, catalytic activity of the Q{sub 3}PW{sub 12}O{sub 40} nanoparticles was examined in the epoxidation of olefins with H{sub 2}O{sub 2}. The prepared nanoparticles acted as recoverable and reusable catalyst in the epoxidation of olefins with H{sub 2}O{sub 2}.

36 MATERIALS SCIENCE↗

Preparation, Characterization and Release Properties of Nanostructured Polystyrene Microparticles Containing Different Silicates

Nanostructured polystyrene microparticles containing different silicates as nanosized filler were successfully prepared using an emulsification/solvent evaporation method. X-ray diffraction showed that all hybrid systems were in an intercalated morphology. The microparticles display regular geometry, improved thermal resistance and release behavior dependent upon the silicate type in the hybrid, as demonstrated by preliminary investigations performed using benzophenone as model penetrant.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Morphological and electrical properties of epoxy-based composites reinforced with exfoliated graphite

An experimental study has been carried out to prepare and characterize epoxy/amine-based composites filled with different percentages of partially exfoliated graphite (i.e. pEG) particles having an exfoliation degree of 56% in order to analyze the effect of the filler amounts on the electrical properties of the resulting nanocomposites. Moreover, in order to fully investigate the direct relationship between the physical properties of the employed filler and the results of the electrical characterization, a structural and morphological characterization of the pEG samples is carried out by means of various type of analysis such as X-ray diffraction patterns, micro-Raman and Scanning Electron Microscopy (SEM) images. The DC electrical characterization reveals a percolation thresholds (EPT) that falls in the range [2–3] wt% and an electrical conductivity of about 0.66 S/m at the highest filler loading (6.5 wt%). From the analysis of the percolative curve it is possible to derive the percolation law parameters and in particular the critical exponent t, whose value (i.e. 1.2) reflects an effective 2D organization of the percolating structure consistent with the type of filler used (2-dimensional). Finally, an extensive analysis concerning the electrical properties in the frequency domain has been carried out in order to evaluate the effectiveness of pEG-loaded composites in terms of electromagnetic interference compatibility (EMC) and their applicability as radar absorbers materials (RAMs).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural investigation of tetraperoxo complexes of Mo(VI) and W(VI)

The family of very unstable tetraperoxo compounds has been prepared from aqueous solutions containing H{sub 2}O{sub 2} and salts of Mo(VI) or W(VI). The crystal structures of Na{sub 2}[Mo(O{sub 2}){sub 4}].4H{sub 2}O and Na{sub 2}[W(O{sub 2}){sub 4}].4H{sub 2}O have been determined from single-crystal data, while the crystal structures of Rb{sub 2}[Mo(O{sub 2}){sub 4}], Cs{sub 2}[Mo(O{sub 2}){sub 4}], Rb{sub 2}[W(O{sub 2}){sub 4}] and Cs{sub 2}[W(O{sub 2}){sub 4}] have been determined from powder X-ray diffraction data. The compounds were also characterised by IR spectroscopy and the number of peroxo groups was determined by titration methods. By means of the density functional theory (DFT) method, the geometry and stability of tetraperoxo complexes have been studied. Even though in all tetraperoxo complexes the central atom Mo(VI), W(VI) or V(V) is surrounded by four peroxo groups and the geometry of the [Me(O{sub 2}){sub 4}]{sup n-} anion is essentially the same, the investigated compounds differ in stability and colour and crystallise in different crystallographic systems. - Graphical abstract: The family of tetraperoxo compounds of Mo(VI) or W(VI) have been obtained. Its crystal structures from single-crystal and from powder X-ray diffraction data have been determined. The compounds were characterised by IR spectroscopy and analytical methods. By means of the density functional theory (DFT) method, the geometry and stability of tetraperoxo complexes have been studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗