Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Single Iridium Atom Doped Ni 2 P Catalyst for Optimal Oxygen Evolution

Single-atom catalysts (SACs) with 100% active sites have excellent prospects for application in the oxygen evolution reaction (OER). However, further enhancement of the catalytic activity for OER is quite challenging, particularly for the development of stable SACs with overpotentials <180 mV. Here, we report an iridium single atom on Ni 2 P catalyst (Ir SA -Ni 2 P) with a record low overpotential of 149 mV at a current density of 10 mA·cm –2 in 1.0 M KOH. The Ir SA -Ni 2 P catalyst delivers a current density up to ∼28-fold higher than that of the widely used IrO 2 at 1.53 V vs RHE. Both the experimental results and computational simulations indicate that Ir single atoms preferentially occupy Ni sites on the top surface. The reconstructed Ir–O–P/Ni–O–P bonding environment plays a vital role for optimal adsorption and desorption of the OER intermediate species, which leads to marked enhancement of the OER activity. Additionally, the dynamic “top-down” evolution of the specific structure of the Ni@Ir particles is responsible for the robust single-atom structure and, thus, the stability property. In conclusion, this Ir SA -Ni 2 P catalyst offers novel prospects for simplifying decoration strategies and further enhancing OER performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A New Simultaneous Membrane Thickness and Catalyst Loading Measurement for Fuel Cell Proton-Exchange Assemblies by $\mathrm{IR}$ Transmission

Here, we present a study of mid-infrared (mid-IR) transmission through typical proton-exchange fuel cell and water electrolyzer catalyst-coated membrane materials, and the determination of membrane layer thickness, and catalyst layer loading, from the power of the transmitted beam. Measured membrane thicknesses lay in the range of 25-125 um, and catalyst areal loadings range from 0.05 to 0.35 mg/cm 2 . We show that the transmission spectrum correlated to membrane thickness and catalyst loading values separately, and also used a mathematical model to calculate both quantities simultaneously, from a single measurement of transmission. Measurements were carried out using a Fourier-transform infrared (FTIR) spectrometer, in specular transmission mode, in the wavelength range of 3-13 um (3333-770 cm -1 ). We discuss the potential application of this method to the development of roll-to-roll manufacturing full-area-scanning quality inspection of catalyst-coated membrane (CCM) materials.

30 DIRECT ENERGY CONVERSION↗

Reacting CO 2 with Light Alkanes to Value-Added Products

Catalytic conversion of anthropogenic carbon dioxide (CO 2 ) into value-added products is a promising strategy to mitigate global carbon emissions. Concurrently, the shale gas revolution has provided an abundant supply of light alkanes (methane, ethane, propane, and butane), presenting a unique opportunity to employ these underutilized hydrocarbons as an effective, low-cost hydrogen source for CO 2 reduction. In this Perspective, we summarize past efforts, current state, and future opportunities for reacting CO 2 with light alkanes to generate a diverse range of value-added products. Compared with direct alkane conversion, the introduction of CO 2 fundamentally alters reaction thermodynamics and kinetics, enabling selective C–H and C–C bond activation while suppressing catalyst deactivation from coke formation. Building on decades of research in dry reforming and CO 2 -assisted dehydrogenation, recent advances in catalyst design have enabled CO 2 -assisted dehydrogenation processes that approach chemical equilibrium for the selective production of olefins and syngas. Importantly, advances in catalyst design and reactor engineering have further expanded the product scope beyond gas-phase (syngas and olefins) to include liquid-phase (oxygenates and aromatics), and solid-phase products (carbon nanomaterials). We highlight key catalyst design principles for controlling reaction pathways and discuss major challenges and opportunities in developing selective and versatile platforms for the simultaneous upgrading of CO 2 and light alkanes.

CO2↗

Construction of a Pt‐CeO x Interface for the Electrocatalytic Hydrogen Evolution Reaction

Abstract The creation of metal‐metal oxide interfaces is an important approach to fine‐tuning catalyst properties through strong interfacial interactions. This article presents the work on developing interfaces between Pt and CeO x that improve Pt surface energetics for the hydrogen evolution reaction (HER) within an alkaline electrolyte. The Pt‐CeO x interfaces are formed by depositing size‐controlled Pt nanoparticles onto a carbon support already coated with ultrathin CeO x nanosheets. This interface structure facilitates substantial electron transfer from Pt to CeO x , resulting in decreased hydrogen binding energies on Pt surfaces, and water dissociation for the HER, as predicted by the density functional theory (DFT) calculations. Electrochemical testing indicates that both Pt specific activity and mass activity are improved by a factor of 2 to 3 following the formation of Pt‐CeO x interfaces. This study underscores the significance and potential of harnessing robust interfacial effects to enhance electrocatalytic reactions.

25 ENERGY STORAGE↗

Strongly Reducing, Visible-Light Organic Photoredox Catalysts as Sustainable Alternatives to Precious Metals

Photoredox catalysis is a versatile approach for the construction of challenging covalent bonds under mild reaction conditions, commonly using photoredox catalysts (PCs) derived from precious metals. As such, there is need to develop organic analogues as sustainable replacements. Although several organic PCs have been introduced, there remains a lack of strongly reducing, visible-light organic PCs. Herein, we establish the critical photophysical and electrochemical characteristics of both a dihydrophenazine and a phenoxazine system that enables their success as strongly reducing, visible-light PCs for trifluoromethylation reactions and dual photoredox/nickel-catalyzed C-N and C-S cross-coupling reactions, both of which have been historically exclusive to precious metal PCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cu-Catalyzed Atom Transfer Radical Polymerization: The Effect of Cocatalysts

Atom transfer radical polymerization (ATRP) is one of the most powerful methods to prepare well-defined (co)polymers. Cu-catalyzed ATRP methods are most commonly used because of the excellent control and tunable catalytic activities via ligand functionalization. This minireview summarizes the development of Cu-catalyzed ATRP in the presence of cocatalysts, which are used to regenerate Cu I complex activators during polymerizations. Fundamentals of Cu-based ATRP catalysts are first introduced, followed by the discussion of different types of cocatalysts in different Cu-catalyzed ATRP methods. Recent developments of photochemical cocatalysts for oxygen-tolerant ATRP and ATRP using long-wavelength irradiation are highlighted, which significantly expand the applications of Cu-catalyzed ATRP. Methods to study the properties of cocatalysts and their roles in Cu-catalyzed ATRP are discussed, with an outlook for the future development of cocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave‐Assisted Synthesis of SrTiO 3 Nanocuboids without TiCl 4

Strontium titanate (STO) nanocuboids are a novel support for Pt nanoparticle catalysts (Pt/STO). The first of many steps in commercializing Pt/STO will be developing a scalable, environmentally sustainable, and cost‐effective STO nanocuboid synthesis. Herein, Sr–Ti–OH mixtures are synthesized from various Sr 2+ and Ti 4+ reagents and treated by convection‐ and microwave‐assisted heating to obtain STO nanoparticles. These experiments clarify how phase composition of the prehydrothermal Sr–Ti–OH mixture and choice of heating method affect final nanoparticle morphology. In Sr–Ti–OH mixtures synthesized with TiCl 4 , STO is the most stable phase and precipitates prior to heating, while titania sol–gels are the most stable phase when other Ti 4+ sources are used. STO nanocrystals always form when Sr–Ti–OH mixtures are treated by convection heating, though nanocuboids are only observed if STO precipitates from the Sr–Ti–OH mixture. Microwave‐assisted hydrothermal treatment more rapidly heats the precursor solution, and thus, STO nanocuboids can form from a variety of Sr–Ti–OH mixtures regardless of mixture composition. Two microwave syntheses of STO nanocuboids are reported: one which uses TiCl 4 as a Ti 4+ source, and another that uses titanium(IV) bis(ammonium lactato) dihydroxide ([NH 4 CH 3 CH(O)CO 2 ] 2 Ti(OH) 2 ), a water‐stable Ti 4+ complex.

Peczak, Ian L.↗

Alternative route for electrochemical ammonia synthesis by reduction of nitrate on copper nanosheets

We propose an efficient and clean avenue for ammonia synthesis, via electroreduction of nitrate which could be obtained from industrial wastewater, domestic sewage, sodium nitrate ore, and nitrification of bacteria and electrochemical oxidation of nitrogen, which addresses the water pollution issues and simultaneously upgrades the nitrate to high-value ammonia. At a low overpotential of -0.15 V versus RHE, Cu nanosheets achieved an ammonia formation rate of 390.1 μg mg -1 Cu h -1 and a Faradaic efficiency of 99.7%, attributed to suppression of the HER activity and apparent improvement of the rate of rate-determining step on Cu (111). Such an ammonia formation rate is more than two orders of magnitude higher than electrochemical nitrogen reduction reaction to ammonia. This work not only develops a powerful strategy to the rational design of robust and efficient catalysts by crystal facet engineering, but also provides an alternative route for electrochemical ammonia synthesis by reduction of nitrate.

36 MATERIALS SCIENCE↗

Self-grown NiCuO x hybrids on a porous NiCuC substrate as an HER cathode in alkaline solution

Electrocatalysts converted directly from the substrates hold the key to achieve high catalytic activity and durability due to their high bonding strength, intimate electronic contact, and tunable phase composition. Herein, an electrically conductive porous NiCuC substrate was adopted to develop a multi-porous NiCuO x /NiCuC hydrogen evolution reaction (HER) catalyst using a one-step oxidation method in this research. The NiCuO x hybrids were characterized as three typical layers: an outer layer with NiCuO 2 solid solution phase, a partially oxidized intermediate layer, and an inner layer with limited stable oxygen content. Here, the NiCuO x /NiCuC possesses abundant Ni(II)–Cu(II) sites to accelerate the Volmer step via the electrostatic effect with OH – , numerous metallic NiCu sites to facilitate the H adsorption, and highly accessible channels to promote the Heyrovsky step during HER catalysis. As a result, high electrocatalytic performance was obtained with an overpotential of 116 mV at a current density of 10 mA cm –2 in 1.0 M potassium hydroxide, and a stable catalytic performance during the HER process for more than 24 h.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrocatalytic CO 2 Reduction to Fuels: Progress and Opportunities

The electrochemical reduction of CO 2 continues to be an appealing option for storing renewable energy in a chemical form. In this review, we assess progress in designing catalysts that convert CO 2 to high energy density products. We explain how reaction data can be reported to reflect the intrinsic properties of the catalyst. This analysis shows that limited advances have been made in improving the performance of Cu. We suggest that opportunities remain using bimetallic catalysts that are resistant to dealloying. While aqueous systems are instrumental to developing our understanding of this chemistry, gas-fed systems that operate at high current densities must be developed. Although obstacles remain for practical application of CO 2 reduction, advances in fundamental understanding made over the years give reason for optimism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic Boundary Layer Simulation of Pulsed CO 2 Electrolysis on a Copper Catalyst

Pulsed electrolysis has been demonstrated to improve the faradaic efficiency (FE) to C 2+ products during the electrochemical reduction of CO 2 over a Cu catalyst, but the nature of this enhancement is poorly understood. Herein, we developed a time-dependent continuum model of pulsed CO 2 electrolysis on Cu in 0.1 M CsHCO 3 that faithfully represents the experimentally observed effects of pulsed electrolysis. This work shows that pulsing results in dynamic changes in the pH and CO 2 concentration near the Cu surface, which lead to an enhanced C 2+ FE as a consequence of repeatedly accessing a transient state of heightened pH and CO 2 concentration at high cathodic overpotential. Using these insights, a variety of pulse shapes were explored to establish operating conditions that maximize the rate of C 2+ product formation and minimize the rates of H 2 and C 1 product formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two-dimensional transition metal carbides as supports for tuning the chemistry of catalytic nanoparticles

Supported nanoparticles are broadly employed in industrial catalytic processes, where the active sites can be tuned by metal-support interactions (MSIs). Although it is well accepted that supports can modify the chemistry of metal nanoparticles, systematic utilization of MSIs for achieving desired catalytic performance is still challenging. The developments of supports with appropriate chemical properties and identification of the resulting active sites are the main barriers. Here, we develop two-dimensional transition metal carbides (MXenes) supported platinum as efficient catalysts for light alkane dehydrogenations. Ordered Pt 3 Ti and surface Pt 3 Nb intermetallic compound nanoparticles are formed via reactive metal-support interactions on Pt/Ti 3 C 2 T x and Pt/Nb 2 CT x catalysts, respectively. MXene supports modulate the nature of the active sites, making them highly selective toward C–H activation. Such exploitation of the MSIs makes MXenes promising platforms with versatile chemical reactivity and tunability for facile design of supported intermetallic nanoparticles over a wide range of compositions and structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Poly(aryl piperidinium) membranes and ionomers for hydroxide exchange membrane fuel cells

One promising approach to reduce the cost of fuel cell systems is to develop hydroxide exchange membrane fuel cells (HEMFCs), which open up the possibility of platinum-group-metal-free catalysts and low-cost bipolar plates. However, scalable alkaline polyelectrolytes (hydroxide exchange membranes and hydroxide exchange ionomers), a key component of HEMFCs, with desired properties are currently unavailable, which presents a major barrier to the development of HEMFCs. Here we show hydroxide exchange membranes and hydroxide exchange ionomers based on poly(aryl piperidinium) (PAP) that simultaneously possess adequate ionic conductivity, chemical stability, mechanical robustness, gas separation and selective solubility. Here, these properties originate from the combination of the piperidinium cation and the rigid ether-bond-free aryl backbone. A low-Pt membrane electrode assembly with a Ag-based cathode using PAP materials showed an excellent peak power density of 920 mW cm -2 and operated stably at a constant current density of 500 mA cm -2 for 300 h with H 2 /CO 2 -free air at 95 °C.

25 ENERGY STORAGE↗

Dual-nitrogen-source engineered Fe–N x moieties as a booster for oxygen electroreduction

Metal–air batteries, particularly Zn–air batteries, have triggered considerable enthusiasm of communities due to their high theoretical power density. Developing highly active, cost-effective and alternative non-precious metal catalysts for the oxygen reduction reaction (ORR) is pivotal for popularizing zinc–air batteries. The rational design and synthesis of this type of catalyst are therefore critical, but it is still challenging to control the well-defined active sites as expected. In this paper, we report a dual-nitrogen-source mediated route for synergistically controlling the formation of active Fe–N x moieties that are embedded in the carbon matrix. The facile control of coordination structures of precursors by this dual-nitrogen-source approach is revealed to play a key role in this report. Impressively, the optimized dual-nitrogen-source derived catalyst (i.e. Fe–N–C-800) exhibits prominently enhanced ORR activity with a half-wave potential of 0.883 V in alkaline electrolyte, higher by 32 mV and 72 mV than those derived from individual nitrogen sources, which is also further evaluated in primary Zn–air batteries. The enhanced ORR activity of Fe–N–C-800 is attributed to the rich Fe–N x active sites derived from the dual-nitrogen-source approach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identification of optimal solar fuel electrocatalysts via high throughput in situ optical measurements

For many solar fuel generator designs involve illumination of a photoabsorber stack coated with a catalyst for the oxygen evolution reaction (OER). In this design, impinging light must pass through the catalyst layer before reaching the photoabsorber(s), and thus optical transmission is an important function of the OER catalyst layer. Many oxide catalysts, such as those containing elements Ni and Co, form oxide or oxyhydroxide phases in alkaline solution at operational potentials that differ from the phases observed in ambient conditions. To characterize the transparency of such catalysts during OER operation, 1031 unique compositions containing the elements Ni, Co, Ce, La, and Fe were prepared by a high throughput inkjet printing technique. Moreover, the catalytic current of each composition was recorded at an OER overpotential of 0.33 V with simultaneous measurement of the spectral transmission. By combining the optical and catalytic properties, the combined catalyst efficiency was calculated to identify the optimal catalysts for solar fuel applications within the material library. Our measurements required development of a new high throughput instrument with integrated electrochemistry and spectroscopy measurements, which enables various spectroelectrochemistry experiments.

25 ENERGY STORAGE↗

Nucleation and Crystal Growth in the Formation of Hierarchical Three-Dimensional Nanoarchitecture

This project is to obtain fundamental understandings of the operation of the Ostwald-Lussac (OL) Law and the oriented attachment (OA) mechanism in nucleation and growth of TiO2 nanorods (NR) via surface-reaction-limited pulsed chemical vapor deposition (SPCVD) process. Three-dimensional (3D) NW networks are a unique type of mesoporous architecture that offers extraordinary surface area density and superior transport properties of electrons, photons, and phonons. It is exceptionally promising for advancing the design and application of functional materials for photovoltaic devices, catalysts beds, hydrogen storage systems, sensors, and battery electrodes. Our group has developed the SPCVD technique by mimicking the mechanism of atomic layer deposition (ALD), which effectively decoupled the crystal growth from precursor concentration while retaining anisotropic 1D growth. For the first time, this technique realized a 3D NW architecture with ultrahigh density and achieved ~4-5 times enhancement on photo-conversion efficiency. Through the support of our current DOE award, we revealed the governing role of the OL Law in the nucleation stage of SPCVD. The formation of NR morphology in SPCVD was identified following the OA mechanism. We also discovered a unique vapor-phase Kirkendall effect in the evolution of tubular or core-shell NR structures. These understandings opened many new opportunities in designing 3D NW architectures with improved properties or new functionalities. Specifically, our accomplishments from this project include five aspects: (1) Observation of the Ostwald-Lussac Law in high-temperature ALD. (2) Observation of vapor-solid Kirkendall effect in ZnO-to-TiO2 nanostructure conversion. (3) Development of highly-efficient capillary photoelectrochemical (PEC) solar-fuel generation. (4) Development of efficient and stable electrochemical protections for black silicon PEC electrodes. (5) Development of doped polymers with tunable electrical properties. This project brings a new level of transformative knowledge on nucleation and crystal growth in the SPCVD NR growth processes. Specifically, quantification of the activation energy landscape guided by the OL law will allow us to establish a critical knowledge base of nucleation kinetics for SPCVD synthesis of NR branches on different material surfaces. Studying the OA kinetics will establish a transformative knowledge base to support this new crystal growth mechanism that can be applied to many functional material systems. This research will pave the road toward a capable and versatile synthesis technology for creating 3D hierarchical mesoscale structures.

36 MATERIALS SCIENCE↗

Environmental impact statement for Manned Spacecraft Center and White Sands Test Facility

This environment has not only attracted people and increased payrolls, but has also created a broader base for the local economy. The activity of the center was a catalyst to private enterprise and has led to sizeable residential and commercial developments. Adequate treatment of domestic and industrial waste water was maintained. A feasibility study is now being conducted to establish a plan for a coordinated, centerwide plan for advanced treatment of domestic and industrial waste water.

Source record↗

Microwave Regenerable Air Purification Device

The feasibility of using microwave power to thermally regenerate sorbents loaded with water vapor, CO2, and organic contaminants has been rigorously demonstrated. Sorbents challenged with air containing 0.5% CO2, 300 ppm acetone, 50 ppm trichloroethylene, and saturated with water vapor have been regenerated, singly and in combination. Microwave transmission, reflection, and phase shift has also been determined for a variety of sorbents over the frequency range between 1.3-2.7 GHz. This innovative technology offers the potential for significant energy savings in comparison to current resistive heating methods because energy is absorbed directly by the material to be heated. Conductive, convective and radiative losses are minimized. Extremely rapid heating is also possible, i.e., 1400 C in less than 60 seconds. Microwave powered thermal desorption is directly applicable to the needs of Advance Life Support in general, and of EVA in particular. Additionally, the applicability of two specific commercial applications arising from this technology have been demonstrated: the recovery for re-use of acetone (and similar solvents) from industrial waste streams using a carbon based molecular sieve; and the separation and destruction of trichloroethylene using ZSM-5 synthetic zeolite catalyst, a predominant halocarbon environmental contaminant. Based upon these results, Phase II development is strongly recommended.

Atwater, James E.↗