Search NASA⌕ Search

SEARCH · Search NASA

Results for “compositional analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Deforestation impacts network co-occurrence patterns of microbial communities in Amazon soils

Co-occurrence networks allow for the identification of potential associations among species, which may be important for understanding community assembly and ecosystem functions. We employed this strategy to examine prokaryotic co-occurrence patterns in the Amazon soils and the response of these patterns to land use change to pasture, with the hypothesis that altered microbial composition due to deforestation will mirror the co-occurrence patterns across prokaryotic taxa. In this study, we calculated Spearman correlations between operational taxonomic units (OTUs) as determined by 16S rRNA gene sequencing, and only robust correlations were considered for network construction (-0.80 ≥ ρ ≥ 0.80, adjusted P <0.01). The constructed network represents distinct forest and pasture components, with altered compositional and topological features. A comparative analysis between two representative modules of these contrasting ecosystems revealed novel information regarding changes to metabolic pathways related to nitrogen cycling. Our results showed that soil physicochemical properties such as temperature, C/N and H + +Al 3+ had a significant impact on prokaryotic communities, with alterations to network topologies. Taken together, changes in co-occurrence patterns and physicochemical properties may contribute to ecosystem processes including nitrification and denitrification, two important biogeochemical processes occurring in tropical forest systems.

54 ENVIRONMENTAL SCIENCES↗

Local Jahn-Teller distortions and orbital ordering in Ba 3 Cu 1+x Sb 2-x O 9 investigated by neutron scattering

In this study, a spin-orbital quantum liquid state is theoretically proposed in the honeycomb lattice of Ba 3 CuSb 2 O 9 , enabled by dynamic short-range correlations between the spin and orbital degrees of freedom. Using neutron diffraction, the local atomic structure of Ba 3 Cu 1+x Sb 2-x O 9 at x = 0 and 0.1 is obtained via the pair density function analysis. The results indicate that both compositions exhibit local Jahn-Teller (JT) distortions with the elongated CuO 3 octahedral configuration. In Ba 3 Cu 1.1 Sb 1.9 O 9 , JT ordering of the distorted CuO 3 octahedra gives rise to the orthorhombic symmetry with ferro-orbital order. On the other hand, in Ba 3 CuSb 2 O 9 , even though the CuO 3 octahedra are JT distorted, there is no long-range ordering hence the symmetry is hexagonal. Furthermore, the local singlet excitation at 5.8 meV observed in Ba 3 CuSb 2 O 9 below 50 K is absent in Ba 3 Cu 1.1 Sb 1.9 O 9 . Instead, an excitation at 2.5 meV is observed in the latter, which is likely associated with short-range spin order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase separation at the dimer-superconductor transition in Ir 1-x Rh x Te 2

The detailed evolution of the local atomic structure across the (x, T) phase diagram of transition metal dichalcogenide superconductor Ir 1–x Rh x Te 2 (0≤x≤0.3, 10 K≤T≤300 K) is obtained from high quality x-ray diffraction data using the atomic pair distribution function (PDF) method. Observed hysteretic thermal structural phase transition from trigonal (P3¯m1) to triclinic (P1¯) dimer phase for low Rh content emphasizes intimate connection between the lattice and electronic properties. For superconducting samples away from the dimer/superconductor phase boundary structural transition is absent and the local structure remains trigonal down to 10 K. In the narrow range of compositions close to the boundary PDF analysis reveals structural phase separation, suggestive of weak first order character of the Rh-doping induced dimer-superconductor quantum phase transition. Samples from this narrow range show weak anomalies in electronic transport and magnetization, hallmarks of the dimer phase, as well as superconductivity albeit with incomplete diamagnetic screening. Furthermore, results suggest that the dimer and superconducting orders exist in the mutually exclusive spatial regions

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlative X-ray micro-nanotomography with scanning electron microscopy at the Advanced Light Source

Geological samples are inherently multi-scale. Understanding their bulk physical and chemical properties requires characterization down to the nano-scale. A powerful technique to study the three-dimensional microstructure is X-ray tomography, but it lacks information about the chemistry of samples. To develop a methodology for measuring the multi-scale 3D microstructure of geological samples, correlative X-ray micro- and nanotomography were performed on two rocks followed by scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS) analysis. The study was performed in five steps: (i) micro X-ray tomography was performed on rock sample cores, (ii) samples for nanotomography were prepared using laser milling, (iii) nanotomography was performed on the milled sub-samples, (iv) samples were mounted and polished for SEM analysis and (v) SEM imaging and compositional mapping was performed on micro and nanotomography samples for complimentary information. Correlative study performed on samples of serpentine and basalt revealed multiscale 3D structures involving both solid mineral phases and pore networks. Significant differences in the volume fraction of pores and mineral phases were also observed dependent on the imaging spatial resolution employed. This highlights the necessity for the application of such a multiscale approach for the characterization of complex aggregates such as rocks. Information acquired from the chemical mapping of different phases was also helpful in segmentation of phases that did not exhibit significant contrast in X-ray imaging. Adoption of the protocol used in this study can be broadly applied to 3D imaging studies being performed at the Advanced Light Source and other user facilities.

58 GEOSCIENCES↗

Measuring of fissile isotope partial antineutrino spectra in direct experiment at nuclear reactor

The direct measuring method is considered to get nuclear reactor antineutrino spectrum. We suppose to isolate partial spectra of the fissile isotopes by using the method of antineutrino spectrum extraction from the inverse beta-decay reaction positron spectrum applied at Rovno experiment. This admits to increase the accuracy of partial antineutrino spectra forming the total nuclear reactor spectrum. It is important for the analysis of the reactor core fuel composition and could be applied for non-proliferation purposes.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A Fluorescence Spectrum Analyzer Based on a Fiber-Optic Y-Circulator

We consider a method of probe analysis employing fiber-optic a composite Y-circulator design for the implementation of laser-induced fluorescence (LIF) spectroscopy diagnostics. The proposed principle of the LIF analyzer is based on spatially separated directed optical beams of excitation and fluorescence radiations. Conditions of the effective Y-circulator operation as a passive fiber-optic switch are determined. Experimental investigation of the switched radiation losses is performed. An example of using the proposed analyzer for LIF diagnostics of biological media is presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Erroneous Attribution of Deep Convective Invigoration to Aerosol Concentration

Abstract Contiguous time–height cloud objects at the Department of Energy Atmospheric Radiation Measurement Southern Great Plains (SGP) site are matched with surface condensation nuclei (CN) concentrations and retrieved thermodynamic and kinematic vertical profiles for warm-cloud-base, cold-cloud-top systems in convectively unstable environments. Statistical analyses show that previously published conclusions that increasing CN concentrations cause a decrease in minimum cloud-top temperature (CTT) at the SGP site through the aerosol convective invigoration effect are unfounded. The CN–CTT relationship is statistically insignificant, while correlations between convective available potential energy (CAPE), level of neutral buoyancy (LNB), and CN concentration account for most of the change in the CN–CTT positive correlation. Removal of clouds with minimum CTTs > −36°C from the analysis eliminates the CN–CTT correlation. Composited dirty conditions at the SGP have ~1°C-warmer low levels and ~1°C-cooler upper levels than clean conditions. This correlation between aerosol concentrations and thermodynamic profiles may be caused by an increase in regional rainfall preceding deep convective conditions as CN concentration decreases. Increased rainfall can be expected to increase wet deposition of aerosols, cool low-level temperatures, and warm upper-level temperatures. The masking of a potential aerosol effect by such small thermodynamic changes implies that the strategy of analyzing subsets of aerosol data by binned meteorological factor values is not a valid method for discerning an aerosol effect in some situations. These findings highlight the need for more careful, detailed, and strategic observations to confidently isolate and quantify an aerosol deep convective invigoration effect.

54 ENVIRONMENTAL SCIENCES↗

Inferring small-sample-reactivity worth from oscillation experiment with auto-corrected local flux

To estimate reactivity changes as a function of time from the signal of detectors count rates, one usually uses point kinetic equations. However, when detectors are located inside the core, it is often necessary to compute a correction factor to account for the flux-shape deformation (i.e. the change of detector efficiency that may have been induced by neutron absorbers movements). Various simulation methods have been developed depending on transients observed. They range from the resolution of static equations up to full-time-dependent neutron transport in 3D. However, those methods require high computational-cost calculations of local reaction rates that rely on nuclear data evaluations. Therefore, a 'measured' reactivity is never determined through pure measurements. Taking advantage of the known oscillation movement of a small sample at the center of the MINERVE reactor, the innovative algorithm presented in this paper derives the correction factor needed to get no time drift on reactivity steps. Derived correction factors are in good agreement with those obtained independently with TRIPOLI-4 through sensitivity analysis. Low sensitivity to the sample composition and moderate sensitivity to the detectors position reinforce the reliability of those results. This application paves the way to almost pure nuclear data reactivity measurements. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Measurement of pyrolysis products from mixed fuel beds during fires in a wind tunnel

Pyrolysis of intact wildland fuels in the southern United States is being measured at bench, wind tunnel, and field scales as part of a larger research project to measure and model pyrolysis of wildland fuels to improve models used to predict prescribed fire behavior. Traditional pyrolysis experiments typically use dried, ground samples in either an inert or oxidizing environment subject to uniform heating and heat transfer. Fletcher and others are presenting results of pyrolysis experiments using a flat-flame burner to heat intact foliage from 14 species of plants native to the southern U.S. at this conference. The fuel beds in prescribed burns in southern pine forests are composed of a mixture of dead pine needles and a large variety of herbaceous and woody plants. We have burned 73 fuel beds composed of Pinus palustris needles and mixtures of Lyonia lucida, Ilex glabra, and Vaccinium darrowii plants in a wind tunnel facility with and without a moderate wind speed of ~ 1 m s-1. The flame from the spreading fire is the heat source for the pyrolysis experiment. Canister samples of pyrolysis and flaming combustion gases within the fuel bed have been collected for offline analysis. Open path spectrometers nonintrusively measured composition of pyrolysis gases in real-time. Thermocouples, a Schmidt-Boelter heat flux sensor, a nadir thermal IR camera, and background-oriented Schlieren photography estimated heat transfer and air flow around the plants. This presentation will present results of this ongoing work.

pyrolysis, longleaf, fetterbush, inkberry, sparkle↗

Coso Geothermal Spectral Library for Rocks and Minerals

An integrated open mineral spectral library designed to enhance the utility and precision of mineral spectral data for geothermal exploration, developed from a reliable and comprehensive digital dataset for seamless sharing by integrating field data, the USGS spectral library, and pertinent information obtained from Coso geothermal field (Coso) in California. The ASD FieldSpec portable spectrometer was utilized for collecting spectral data, which was subsequently analyzed using the THOR Material Identification tool in ENVI, The Spectral Geologist (TSG) software by CSIRO, and the Fully Constrained Linear Spectral Unmixing algorithm (FCLSU) in MATLAB. Scanning Electron Microscopy (SEM) with a mineralogy-analyzing function was employed to assess the mineral composition of samples, ensuring precise mineralogical analysis. A portable X-ray fluorescence (pXRF) spectrometer was also utilized to gather information on elemental enrichment. A framework for developing spectra data and establishing spectral libraries for various geological cases was proposed within this study. The characteristic spectra of six alteration minerals - alunite, chalcedony, epidote, hematite, kaolinite, and opal - were acquired from Coso samples. The spectral library for the Coso alteration minerals was introduced for further application in academic study or industrial exploration. To browse the Coso Geothermal Spectral data and related figures from spreadsheets: #1 Unzip and store the following items in the same folder. 'Contact Probe Data.zip', 'Sample Photos.zip', and 'Coso spectra of higher-certainity minerals.xlsx'. #2 Open 'Coso spectra of higher-certainity minerals.xlsx'. The hyperlinks in the spreadsheet lead to the folders or figures of: spectra .asd file, spectra ASC II file, spectra plots, and sample photos. The spectra data is raw data without splice correction. Spectra .asd files require particular software to open. (These cannot be opened in GIS software such as ArcGIS.) Spectra ASC II files can be opened in a text editor or spread sheet program.

15 GEOTHERMAL ENERGY↗

Physicochemical Changes of Cellulose and Their Influences on Populus trichocarpa Digestibility after Different Pretreatments

Pretreatment is commonly used to reduce recalcitrance of the lignin-carbohydrate matrix. In this study, leading pretreatment technologies, including dilute sulfuric acid, liquid hot water, alkaline, and organosolv pretreatments, were applied to the selected Populus trichocarpa genotype with relatively low lignin content to elucidate cellulose physicochemical property changes and digestibility-related factors. Pretreated Populus trichocarpa (BESC 131) exhibited higher accessibility and glucose yield than the untreated biomass. Chemical composition and Fourier transform infrared (FTIR) analysis results revealed that hemicellulose and lignin were removed to a varying extent depending on the pretreatment techniques applied. Here, the degree of polymerization of the cellulose was decreased to the largest extent after dilute acid pretreatment, followed by organosolv, alkaline, and liquid hot water pretreatments. Cellulose crystallinity index was slightly changed after the pretreatments; however, its differences were not remarkable between those pretreatment techniques. Among four different pretreatments, organosolv was the most effective pretreatment technology in terms of sugar release, which was three times higher than that of the untreated native biomass. Among all of the tested cell wall traits, the lignin content of Populus trichocarpa was the most remarkable feature associated with glucose release, though Populus trichocarpa recalcitrance was not solely dependent on any single factor.

59 BASIC BIOLOGICAL SCIENCES↗

Phase Mapper: Accelerating Materials Discovery with AI

From the stone age, to the bronze, iron age, and modern silicon age, the discovery and characterization of new materials has always been instrumental to humanity's progress and development. With the current pressing need to address sustainability challenges and find alternatives to fossil fuels, we look for solutions in the development of new materials that will allow for renewable energy. To discover materials with the required properties, materials scientists can perform high-throughput materials discovery, which includes rapid synthesis and characterization via X-ray diffraction (XRD) of thousands of materials. A central problem in materials discovery, the phase map identification problem, involves the determination of the crystal structure of materials from materials composition and structural characterization data. This analysis is traditionally performed mainly by hand, which can take days for a single material system. In this work we present Phase-Mapper, a solution platform that tightly integrates XRD experimentation, AI problem solving, and human intelligence for interpreting XRD patterns and inferring the crystal structures of the underlying materials. Phase-Mapper is compatible with any spectral demixing algorithm, including our novel solver, AgileFD, which is based on convolutive non-negative matrix factorization. AgileFD allows materials scientists to rapidly interpret XRD patterns, and incorporates constraints to capture prior knowledge about the physics of the materials as well as human feedback. With our system, materials scientists have been able to interpret previously unsolvable systems of XRD data at the Department of Energy’s Joint Center for Artificial Photosynthesis, including the Nb-Mn-V oxide system, which led to the discovery of new solar light absorbers and is provided as an illustrative example of AI-enabled high throughput materials discovery

Computer Science↗

High-pressure behavior of cuprospinel CuFe 2 O 4 : Influence of the Jahn-Teller effect on the spinel structure

The Jahn-Teller-effect at Cu 2+ in cuprospinel CuFe 2 O 4 was investigated using high-pressure, single crystal synchrotron x-ray diffraction (XRD) techniques at beamline BL10A at the Photon Factory, KEK, Japan. Six data sets were collected in the pressure range from ambient to 5.9 GPa at room temperature. Structural refinements based on the data were performed at 0.0, 1.8, 2.7, and 4.6 GPa. The unit cell volume of cuprospinel decreases continuously from 590.8 (6) Å 3 to 579.5 (8) Å 3 up to 3.8 GPa. Leastsquares fitting to a third-order Birch-Murnaghan equation of state yields zero-pressure volume V 0 = 590.7 (1) Å 3 and bulk modulus K 0 = 188.1 (4.4) GPa with K’ fixed at 4.0. The crystal chemical composition determined by electron-probe analysis and x-ray site-occupancy refinement is represented as [Cu 0.526 Fe 0.474 ] [6] [Cu 0.074 Fe 1.926 ]O 4 . Most of the Cu 2+ are preferentially distributed onto the tetrahedral (T) site of the spinel structure. At 4.6 GPa, a cubic-tetragonal phase transition is indicated by a splitting of the a axis of the cubic structure into a smaller a axis and a longer c axis, with unit cell parameters a = 5.882 (1) Å and c = 8.337 (1) Å. The tetragonal crystal structure with space group I4 1 /amd was refined to R1 = 0.0182 and wR2 = 0.0134 using observed 35 x-ray reflections. At the T site, the tetrahedral O-T-O bond angles along the c-axis direction of the unit cell decreases slightly from 109.47 ° to 108.7 (4) °, which generates a stretched tetrahedral geometry along the c-axis. The cubic-totetragonal transition induced by the Jahn-Teller effect at Cu 2+ is attributable to the angular distortion at the tetrahedral site. At the octahedral (M) site, on the other hand, the two M-O bonds parallel to the caxis are shortened with respect to the four M-O bonds parallel to the ab-plane, which are lengthened as a result of the phase transition, leading to a compressed octahedral geometry along the c-axis. With the competing distortions between the stretched tetrahedron and the compressed octahedron along the c-axis, the a unit cell parameter is shortened with respect to the c unit cell parameter, giving a c/a ratio slightly greater than unity as referred to cubic lattice (c/a = 1.002). The c/a value increases to 1.007 with pressure, suggesting a further evolution of the stretched tetrahedron and the compressed octahedron. The variation of c/a ratio of the cuprospinel is similar to that observed in the tetragonally distorted cuprospinel with Cu 2+ fully occupying the octahedral site of the structure.

58 GEOSCIENCES↗

Evaluation of Gas, Oil and Wood Pellet Fueled Residential Heating System Emissions Characteristics

This study has measured the emissions from a wide range of heating equipment burning different fuels including several liquid fuel options, utility supplied natural gas and wood pellet resources. The major effort was placed on generating a database for the mass emission rate of fine particulates (PM 2.5) for the various fuel types studied. The fine particulates or PM 2.5 (less than 2.5 microns in size) were measured using a dilution tunnel technique following the method described in US EPA CTM-039. The PM 2.5 emission results are expressed in several units for the benefit of scientists, engineers and administrators. The measurements of gaseous emissions of O{sub 2}, CO{sub 2}, CO, NO{sub x} and SO{sub 2} were made using a combustion analyzer based on electrochemical cells These measurements are presented for each of the residential heating systems tested. This analyzer also provides a steady state efficiency based on stack gas and temperature measurements and these values are included in the report. The gaseous results are within the ranges expected from prior emission studies with the enhancement of expanding these measurements to fuels not available to earlier researchers. Based on measured excess air levels and ultimate analysis of the fuel's chemical composition the gaseous emission results are as expected and fall within the range provided for emission factors contained in the US-EPA AP 42, Emission Factors Volume I, Fifth Edition. Since there were no unexpected findings in these gaseous measurements, the bulk of the report is centered on the emissions of fine particulates, or PM 2.5. The fine particulate (PM 2.5) results for the liquid fuel fired heating systems indicate a very strong linear relationship between the fine particulate emissions and the sulfur content of the liquid fuels being studied. This is illustrated by the plot contained in the first figure on the next page which clearly illustrates the linear relationship between the measured mass of fine particulate per unit of energy, expressed as milligrams per Mega-Joule (mg/MJ) versus the different sulfur contents of four different heating fuels. These were tested in a conventional cast iron boiler equipped with a flame retention head burner. The fuels included a typical ASTM No. 2 fuel oil with sulfur below 0.5 percent (1520 average ppm S), an ASTM No. 2 fuel oil with very high sulfur content (5780 ppm S), low sulfur heating oil (322 ppm S) and an ultra low sulfur diesel fuel (11 ppm S). Three additional oil-fired heating system types were also tested with normal heating fuel, low sulfur and ultralow sulfur fuel. They included an oil-fired warm air furnace of conventional design, a high efficiency condensing warm air furnace, a condensing hydronic boiler and the conventional hydronic boiler as discussed above. The linearity in the results was observed with all of the different oil-fired equipment types (as shown in the second figure on the next page). A linear regression of the data resulted in an Rsquared value of 0.99 indicating that a very good linear relationship exits. This means that as sulfur decreases the PM 2.5 emissions are reduced in a linear manner within the sulfur content range tested. At the ultra low sulfur level (15 ppm S) the amount of PM 2.5 had been reduced dramatically to an average of 0.043 mg/MJ. Three different gas-fired heating systems were tested. These included a conventional in-shot induced draft warm air furnace, an atmospheric fired hydronic boiler and a high efficiency hydronic boiler. The particulate (PM 2.5) measured ranged from 0.011 to 0.036 mg/MJ. depending on the raw material source used in their manufacture. All three stoves tested were fueled with premium (low ash) wood pellets obtained in a single batch to provide for uniformity in the test fuel. Unlike the oil and gas fired systems, the wood pellet stoves had measurable amounts of particulates sized above the 2.5-micron size that defines fine particulates (less than 2.5 microns). The fine particulate emissions rates ranged from 22 to 30 mg/ MJ with an average value of 25 mg/MJ for the three stoves tested.

02 PETROLEUM↗

Solvent Hold Tank Sample Results for MCU-14-135/136 and MCU-14-214/215/216: February and March 2014 Monthly Samples

SRNL received two sets of SHT samples (MCU-14-135-136 in February 2014 and MCU-14-214-216 in March 2014) for analysis. The samples were analyzed for composition. As with the previous solvent sample results, these analyses indicate that the solvent does not require Isopar ® L trimming at this time. However, the addition of TiDG (suppressor) to the blended solvent is recommended. Evidence of possible (slight) isomerization of the solvent, probably Isopar ® L or TiDG degradation products, was observed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

SOLVENT HOLD TANK SAMPLE RESULTS FOR MCU-14-259/260/261 AND MCU-14-315/316/317: APRIL AND MAY 2014 MONTHLY SAMPLES

SRNL received two sets of SHT samples (MCU-14-259/260/261 in April 2014 and MCU-14- 315/316/317 in May 2014) for analysis. The samples were analyzed for composition. Both samples have similar chemical composition. As with the previous solvent sample results, these analyses indicate that the solvent does not require Isopar® L trimming at this time. Since an addition of TiDG and MaxCalix to the SHT was added in early July 2014, the solvent does not require TiDG addition at this time. The current TiDG level (1.5 mM) is above the minimum recommended operating level of 1 mM.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Technical basis for inner container leak detection sensitivity goals in 3013 DE surveillance

Helium leak checking of 3013 inner container lids is under consideration for addition to DE Surveillance tasks as an improved means to detect any through-wall flaws that may have formed during storage. This white paper evaluates whether leak checking at DE could replace and improve upon the current method of comparing gas compositions and pressures within the inner and outer containers. We have used viscous and molecular flow equations in ANSI N14.5 to calculate what the measured standard helium leak rate would be for hypothetical leaks of three different sizes. For comparison, we have also calculated the effects on gas composition and pressure differences as a function of pre-DE storage time for the same three leak sizes, using molecular and viscous flow equations as well as diffusion equations to predict the relevant gas transport. For a hypothetical leak that would be measured at 1x10 -7 std cc/sec, likely an achievable sensitivity using helium leak checking at DE, the calculations predict no measurable effect on pressure difference or gas composition as measured by DE gas analysis. We also calculate that it would take over 200 years for water vapor to diffuse through a 10 -7 std cc/sec leak enough to raise the RH outer container to half the RH value in the inner container. A leak 100 times larger, which would be measured at 1x10 -5 std cc/sec, the same water vapor diffusion would take at least 14 years. Our conclusion is that helium leak checking will be useful even at a sensitivity of 1x10 -5 std cc/sec, and a significant improvement over current DE methods at a sensitivity of 1x10 -7 std cc/sec.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

16-098 – Nuclear Nonproliferation Applications of 14 C Analyses by Accelerator Mass Spectrometry

In January 2015 the Idaho National Laboratory installed a 0.5 MV Accelerator Mass Spectrometer (AMS). The INL AMS is ideally suited for ultra-trace isotopic analyses supporting national security applications including nuclear forensics and nonproliferation. This LDRD seeks to develop INL’s sample preparation and AMS analysis capability to analyze the isotopic composition of carbon containing samples for ultratrace 14 C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗