Search NASA⌕ Search

SEARCH · Search NASA

Results for “distributed parallelization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

A novel method for experimental characterization of large-angle scattered particles in scanned carbon-ion therapy

Purpose: It is essential to consider large-angle scattered particles in dose calculation models for therapeutic carbon-ion beams. However, it is difficult to measure the small dose contribution from large-angle scattered particles. In this paper, the authors present a novel method to derive the parameters describing large-angle scattered particles from the measured results. Methods: The authors developed a new parallel-plate ionization chamber consisting of concentric electrodes. Since the sensitive volume of each channel is increased linearly with this type, it is possible to efficiently and easily detect small contributions from the large-angle scattered particles. The parameters describing the large-angle scattered particles were derived from pencil beam dose distribution in water measured with the new ionization chamber. To evaluate the validity of this method, the correction for the field-size dependence of the doses, “predicted-dose scaling factor,” was calculated with the new parameters. Results: The predicted-dose scaling factor calculated with the new parameters was compared with the existing one. The difference between the new correction factor and the existing one was 1.3%. For target volumes of different sizes, the calculated dose distribution with the new parameters was in good agreement with the measured one. Conclusions: Parameters describing the large-angle scattered particles can be efficiently and rapidly determined using the new ionization chamber. The authors confirmed that the field-size dependence of the doses could be compensated for by the new parameters. This method makes it possible to easily derive the parameters describing the large-angle scattered particles, while maintaining the dose calculation accuracy.

61 RADIATION PROTECTION AND DOSIMETRY↗

Comparison of methods for the measurement of radiation dose distributions in high dose rate (HDR) brachytherapy: Ge-doped optical fiber, EBT3 Gafchromic film, and PRESAGE{sup Registered-Sign} radiochromic plastic

Purpose: Dose distribution measurement in clinical high dose rate (HDR) brachytherapy is challenging, because of the high dose gradients, large dose variations, and small scale, but it is essential to verify accurate treatment planning and treatment equipment performance. The authors compare and evaluate three dosimetry systems for potential use in brachytherapy dose distribution measurement: Ge-doped optical fibers, EBT3 Gafchromic film with multichannel analysis, and the radiochromic material PRESAGE{sup Registered-Sign} with optical-CT readout. Methods: Ge-doped SiO{sub 2} fibers with 6 {mu}m active core and 5.0 mm length were sensitivity-batched and their thermoluminescent properties used via conventional heating and annealing cycles. EBT3 Gafchromic film of 30 {mu}m active thickness was calibrated in three color channels using a nominal 6 MV linear accelerator. A 48-bit transmission scanner and advanced multichannel analysis method were utilized to derive dose measurements. Samples of the solid radiochromic polymer PRESAGE{sup Registered-Sign }, 60 mm diameter and 100 mm height, were analyzed with a parallel beam optical CT scanner. Each dosimetry system was used to measure the dose as a function of radial distance from a Co-60 HDR source, with results compared to Monte Carlo TG-43 model data. Each system was then used to measure the dose distribution along one or more lines through typical clinical dose distributions for cervix brachytherapy, with results compared to treatment planning system (TPS) calculations. Purpose-designed test objects constructed of Solid Water and held within a full-scatter water tank were utilized. Results: All three dosimetry systems reproduced the general shape of the isolated source radial dose function and the TPS dose distribution. However, the dynamic range of EBT3 exceeded those of doped optical fibers and PRESAGE{sup Registered-Sign }, and the latter two suffered from unacceptable noise and artifact. For the experimental conditions used in this study, the useful range from an isolated HDR source was 5-40 mm for fibers, 3-50 mm for EBT3, and 4-21 mm for PRESAGE{sup Registered-Sign }. Fibers demonstrated some over-response at very low dose levels, suffered from volume averaging effects in the dose distribution measurement, and exhibited up to 9% repeatability variation over three repeated measurements. EBT3 demonstrated excellent agreement with Monte Carlo and TPS dose distributions, with up to 3% repeatability over three measurements. PRESAGE{sup Registered-Sign} gave promising results, being the only true 3D dosimeter, but artifacts and noise were apparent. Conclusions: The comparative response of three emerging dosimetry systems for clinical brachytherapy dose distribution measurement has been investigated. Ge-doped optical fibers have excellent spatial resolution for single-direction measurement but are currently too large for complex dose distribution assessment. The use of PRESAGE{sup Registered-Sign} with optical-CT readout gave promising results in the measurement of true 3D dose distributions but further development work is required to reduce noise and improve dynamic range for brachytherapy dose distribution measurements. EBT3 Gafchromic film with multichannel analysis demonstrated accurate and reproducible measurement of dose distributions in HDR brachytherapy. Calibrated dose measurements were possible with agreement within 1.5% of TPS dose calculations. The suitability of EBT3 as a dosimeter for 2D quality control or commissioning work has been demonstrated.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

The crystal structure of aluminum doped {beta}-rhombohedral boron

A crystal structure of aluminum doped {beta}-rhombohedral boron was studied by single-crystal X-ray diffraction at 80 K. The crystals were synthesized using high-pressure high temperature technique at 3 GPa and 2100 K. The structure is based on three-dimensional framework made of B{sub 12} icosahedra with voids occupied by the B{sub 28}-B-B{sub 28} units, it has the R-3m space group with a=10.9014(3), c=23.7225(7) A lattice dimensions in hexagonal setting. Aluminum atoms are located in A1 and D special positions of the {beta}-B structure with occupancies of 82.7(6)% and 11.3(4)%, respectively. Additional boron atoms are located near the D-site. Their possible distribution is discussed. Finally we have found two appropriate structural models whose refinement suggests two possible chemical compositions, AlB{sub 44.8(5)} and AlB{sub 37.8(5)}, which are in a good agreement with the chemical analysis data obtained from EDX. The crystal structure of AlB{sub 44.8(5)} is described in detail. - Graphical abstract: The atomic distribution near the B(15) atom (non-labeled atom in the center of the picture) shown along the c axis. Anisotropic displacement ellipses for Al(2) (D-site) and B(15) are shown with 50 % probability level. The mirror plane with Miller indices (1 1 0) and related to it (-1 2 0) and (-2 1 0) generated by the 3-fold rotation-inversion axis parallel to the c axis splits the position of B(16) over two sites. Highlights: Black-Right-Pointing-Pointer The crystal structure of the AlB{sub 44.8(5)} has been refined. Black-Right-Pointing-Pointer Aluminum atoms partially fill certain types of voids (the A1- and D-sites). Black-Right-Pointing-Pointer We have got two possible models of atomic distribution near the D-site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal environment of the Southern Washington region of the Cascadia subduction zone

Eleven recently collected multichannel seismic (MCS) profiles from the Cascadia Open–Access Seismic Transects experiment offshore Washington State are used to characterize the distribution of bottom–simulating reflectors (BSRs) from seaward of the deformation front onto the continental shelf of the Cascadia Subduction Zone. The 11 MCS lines consisted of nine lines perpendicular and two lines parallel to the Cascadia margin covering a 100 km along–strike region of the accretionary wedge. From these MCS profiles we generated a 3–D view of the Cascadia margin thermal structure by interpreting 40,232 individual BSR picks in terms of temperature and heat flow. Overall BSR–derived heat flow values decrease from approximately 95 mW m –2 10 km east of the deformation front to approximately 60 mW m –2 located 60 km landward of the deformation front. Anomalously low heat flow values near 25 mW m –2 on a prominent midmargin terrace indicate recent sediment failure within the accretionary prism. Localized differences between BSR heat flow and numerical models reflect an estimated regional mean vertical fluid flow of +0.53 cm yr –1 for the survey area, with localized fluid flow approaching a maximum of +3.8 cm yr –1 . Distinct finite element models for the nine MCS profiles perpendicular to the deformation front reproduce BSR heat flow values, producing an overall root–mean–square misfit of 10.2 mW m –2 . In conclusion, at the deformation front, the incoming oceanic sediment/crust interface temperatures vary from 164°C to 179°C, indicating the updip limit of the Cascadia seismogenic zone.

58 GEOSCIENCES↗

Eye-Safe KGd(WO{sub 4}){sub 2} Raman Lasers: Comparative Study of Pumping of Nd:KGd(WO{sub 4}){sub 2} Lasers With {sup 4}F{sub 3/2} → {sup 4}I{sub 11/2} and {sup 4}F{sub 3/2} → {sup 4}I{sub 13/2} Working Transitions{sup **}

This is a comparative study of eye-safe extracavity KGd(WO{sub 4}){sub 2} (KGW) Raman lasers that convert multimode emission from pulsed Nd:KGW lasers operating on the {sup 4}F{sub 3/2} → {sup 4}I{sub 11/2} and {sup 4}F{sub 3/2} → {sup 4}I{sub 13/2} transitions into the third Stokes component at λ = 1500 nm and the first Stokes component at λ = 1507 or 1538 nm. For equal sizes of the Raman and laser sections of a Raman laser emitting the third Stokes component, the pulse energy is higher (~14.2 mJ) and the divergence of the Stokes beam is lower (~9.4 mrad) for a lower energy of the Nd:KGW laser (~6.7 J). For pump pulse energies of 29–34 mJ, all the Raman lasers have essentially the same optical lasing efficiency of up to 36%. In terms of the electrical energy delivered to the flashlamp, however, the overall efficiency of the Raman laser for the third Stokes component is a factor of ~1.7 higher. The duration of the Raman pulses is comparable to that of the pump pulses and is ~20 ns for the first Stokes components. The pulse in the third Stokes component is shorter by a factor of 2.5–3. Given the different pump levels and the differences in the thermallyinduced optical distortions of the Nd:KGW laser components, the energy density distribution for beams of the first Stokes components is elliptical, while that of the third Stokes components is almost circular. The possibility of simultaneous lasing at wavelengths of 1507 and 1538 nm with parallel and mutually orthogonal polarizations of the Stokes waves is demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Finite element formulation of fluctuating hydrodynamics for fluids filled with rigid particles using boundary fitted meshes

In this paper, we present a finite element implementation of fluctuating hydrodynamics with a moving boundary fitted mesh for treating the suspended particles. The thermal fluctuations are incorporated into the continuum equations using the Landau and Lifshitz approach [1]. The proposed implementation fulfills the fluctuation–dissipation theorem exactly at the discrete level. Since we restrict the equations to the creeping flow case, this takes the form of a relation between the diffusion coefficient matrix and friction matrix both at the particle and nodal level of the finite elements. Brownian motion of arbitrarily shaped particles in complex confinements can be considered within the present formulation. A multi-step time integration scheme is developed to correctly capture the drift term required in the stochastic differential equation (SDE) describing the evolution of the positions of the particles. The proposed approach is validated by simulating the Brownian motion of a sphere between two parallel plates and the motion of a spherical particle in a cylindrical cavity. The time integration algorithm and the fluctuating hydrodynamics implementation are then applied to study the diffusion and the equilibrium probability distribution of a confined circle under an external harmonic potential.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The in-depth residual strain heterogeneities due to an indentation and a laser shock peening for Ti-6Al-4V titanium alloy

In this paper, heterogeneity of the through-thickness residual strain due to the laser shock peening (LSP) in comparison with that due to the indentation was studied in Ti-6Al-4V alloy samples. The latter is almost a quasi-static process while the former features extremely high strain-rate deformation. The synchrotron based high-energy X-ray diffraction was employed to investigate the through-thickness residual strain distribution. The studied two samples after the two processing procedures share the following features: (i) the pressure affected depths are both ~2 mm and (ii) the largest magnitudes of the compressive residual strains parallel to the surface are ~4,000 με. However, the pit depth for the indentation sample is ~9 times larger than that for the LSP. The position featuring the largest magnitude of the compressive residual strain is in the sub-surface for the indentation while it is in the surface for the LSP. Results of the elastic-visco-plastic finite element simulation for the indentation indicate that the position featuring the maximum accumulative plastic shear as defined in this paper corresponds to the location with the largest magnitude of compressive residual strain. To validate this finding, full width at half maximum (FWHM) of the X-ray diffraction profile, which is proportional to the level of the plastic deformation, is also studied. Finally, it is found that positions with the largest FWHM indeed correspond to the largest magnitude of compressive residual strain for both tests.

36 MATERIALS SCIENCE↗

Along the Channel Gradients Impact on the Spatioactivity of Gas Diffusion Electrodes at High Conversions during CO 2 Electroreduction

Results of a 2-D transport model for a gas diffusion electrode performing CO 2 reduction to CO with a flowing catholyte are presented, including the concentration gradients along the flow cell, spatial distribution of the current density and local pH in the catalyst layer. The model predicts that both the concentration of CO 2 and the buffer electrolyte gradually diminish along the channels for a parallel flow of gas and electrolyte as a result of electrochemical conversion and nonelectrochemical consumption. At high single-pass conversions, significant concentration gradients exist along the flow channels leading to large local variations in the current density (>150 mA/cm 2 ), which becomes prominent when compared to ohmic losses. In addition, concentration overpotentials change dramatically with CO 2 flow rate, which results in significant differences in outlet concentrations at high conversions. The outlet concentration of CO attains a maximum of 80% along with 5% CO 2 and 15% H 2 , although the maximum single-pass conversion is limited to below 60% due to homogeneous consumption by the electrolyte. Fundamental and practical implications of our findings on electrochemical CO 2 reduction are discussed with a focus on the trade-off between high current density operation and high single-pass conversion efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scaling of the plasma sheath in a magnetic field parallel to the wall

Motivated by the magnetized target fusion [R. E. Siemon et al., Comments Plasma Phys. Controlled Fusion 18, 363 (1999)] experiment, a systematic investigation of the scaling of a one-dimensional plasma sheath with a magnetic field parallel to the wall was carried out using analytical theory and the particle-in-cell code VPIC [K. J. Bowers et al., Phys. Plasmas 15, 055703 (2008)]. Starting with a uniform Maxwellian distribution in three-dimensional velocity space, plasma consisting of collisionless electrons, and ions of the same temperature interacts with a perfectly absorbing wall. A much larger ion Larmor radius causes the wall to be charged positively, creating an electric field that tends to repel the ions and attract the electrons, which is the opposite of the conventional Bohm sheath [D. Bohm, Characteristics of Electrical Discharges in Magnetic Fields (McGraw-Hill, New York, 1949)]. This manifests in the form of gyro-orbit modification by this spatially varying electric field, the degree of which is found to intricately depend on the relation between three parameters: electron and ion thermal Larmor radii and plasma Debye length: rho{sub the}, rho{sub thi}, and lambda{sub D}. Furthermore, the study of the sheath width scaling through the analysis of the full width at half max of electric field, x{sub Eh}, elucidates three distinct types of behavior of x{sub Eh}, corresponding to three different regimes: rho{sub thi}<lambda{sub D}, rho{sub the}<lambda{sub D}<rho{sub thi}, and lambda{sub D}<rho{sub the}. In addition to the sheath width, the scaling of the wall potential phi{sub Wall}, as well as the role of the ion mass and charge Z are investigated. The results of this analytical and computational approach can also be useful in studying the plasma sheath in the conventional magnetic confinement devices, in particular at the first wall of tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A dielectric-barrier discharge enhanced plasma brush array at atmospheric pressure

This study developed a large volume cold atmospheric plasma brush array, which was enhanced by a dielectric barrier discharge by integrating a pair of DC glow discharge in parallel. A platinum sheet electrode was placed in the middle of the discharge chamber, which effectively reduced the breakdown voltage and working voltage. Emission spectroscopy diagnosis indicated that many excited argon atoms were distributed almost symmetrically in the lateral direction of the plasma. The concentration variations of reactive species relative to the gas flow rate and discharge current were also examined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Detection of electron energy distribution function anisotropy in a magnetized electron cyclotron resonance plasma by using a directional Langmuir probe

Anisotropy in the electron energy distribution function (EEDF) in an electron cyclotron resonance plasma with magnetized electrons and weakly magnetized ions is experimentally investigated using a directional Langmuir probe. Under an assumption of independent EEDFs in the directions parallel and perpendicular to the magnetic field, the directional variation of the EEDF is evaluated. In the measured EEDFs, a significantly large population density of electrons with energies larger than 30 eV is found in one of the cross-field directions depending on the magnetic field direction. With the aid of an electron trajectory calculation, it is suggested that the observed anisotropic electrons originate from the EEDF anisotropy and the cross-field electron drift.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Coupling of electrostatic ion cyclotron and ion acoustic waves in the solar wind

The coupling of electrostatic ion cyclotron and ion acoustic waves is examined in three component magnetized plasma consisting of electrons, protons, and alpha particles. In the theoretical model relevant to solar wind plasma, electrons are assumed to be superthermal with kappa distribution and protons as well as alpha particles follow the fluid dynamical equations. A general linear dispersion relation is derived for such a plasma system which is analyzed both analytically and numerically. For parallel propagation, electrostatic ion cyclotron (proton and helium cyclotron) and ion acoustic (slow and fast) modes are decoupled. For oblique propagation, coupling between the cyclotron and acoustic modes occurs. Furthermore, when the angle of propagation is increased, the separation between acoustic and cyclotron modes increases which is an indication of weaker coupling at large angle of propagation. For perpendicular propagation, only cyclotron modes are observed. The effect of various parameters such as number density and temperature of alpha particles and superthermality on dispersion characteristics is examined in details. The coupling between various modes occurs for small values of wavenumber.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two-stage bulk electron heating in the diffusion region of anti-parallel symmetric reconnection

Electron bulk energization in the diffusion region during anti-parallel symmetric reconnection entails two stages. First, the inflowing electrons are adiabatically trapped and energized by an ambipolar parallel electric field. Next, the electrons gain energy from the reconnection electric field as they undergo meandering motion. These collisionless mechanisms have been described previously, and they lead to highly structured electron velocity distributions. Furthermore, a simplified control-volume analysis gives estimates for how the net effective heating scales with the upstream plasma conditions in agreement with fully kinetic simulations and spacecraft observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Geodesic modes driven by untrapped resonances of NB energetic ions in tokamaks

Geodesic modes are typically excited by a minor concentration of energetic ions, but unstable mode frequencies are substantially different from Geodesic Acoustic Modes (GAMs) and are named EGAM (Energetic particle GAM). The EGAM instability driven by Neutral Beam Injection (NBI) has been observed in DIII-D tokamak experiments. The problem of the geodesic mode instability is analytically studied using a full drift kinetic equation. To analyze the instability condition, an ionization NBI location is assumed to be on the high field side of tokamaks. Here, a minority NBI ion distribution is modeled by an energetic ion tail in the untrapped-passing region that remains between a magnetic axis and the trapped NBI boundary. The EGAM instability condition is defined by the parallel NBI ion velocity v | | ≈ ( 1.2 – 1.5 ) ω R 0 q 0 that has to be above the effective EGAM phase velocity. In this case, the EGAM frequency is ≈ 50 % below the standard stable GAM frequency, which is reduced by a small concentration of energetic NBI ions. Qualitative comparison of the developed geodesic mode theory with NBI heating experiments in the midregion of the tokamak plasma is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

WE-EF-BRA-11: Precision Partial-Tumor Irradiation of Dorsal Rodent Mammary Tumors

Purpose: To introduce a pre-clinical treatment technique on a micro-irradiator to treat specific volumes of dorsal mammary tumors in BALB/c mice while sparing lungs and spine. This technique facilitates pre-clinical investigation of tumor response to sub-optimal radiation treatments in which a portion of the tumor is unirradiated, known as a “marginal miss”. In-vitro data suggests that partial tumor radiations trigger a more aggressive phenotype in non-irradiated, regional tumor cells via bystander effects. As the lung tissue is spared, the impact of marginal miss on the development of pulmonary metastasis may be assessed. Methods: End to end test was performed on three BALB/c mice as proof of concept for larger studies. 1Gy was delivered on the micro-irradiator employing previously unexplored lateral parallel-opposed diamond and/or triangle-shaped beams. The margins of the treatment beam were defined using a combination of tumor palpation, barium fiducial markers, and real-time fluoroscopic images. The dose distribution was independently verified with kilovoltage beam Monte Carlo dose calculations with 7% statistical uncertainty and double exposure images. As a final step, the technique was used in a larger pre-clinical study (15Gy, 36 BALB/c mice) and lung metastasis in response to tumor irradiation of 100%, 50% and 0% was quantified. Results: For the Monte-Carlo dose calculations, the dose volume histograms established a maximum dose within the un-irradiated and radiated portions of the mammary tumor of 0.3Gy and 1.5Gy respectively, with a sharp gradient at the boundary. 100% of the lung volume received less than 0.5Gy. This technique proved suitable for a pre-clinical marginal miss study with 50% more lung metastases in partially-radiated mouse models compared to completely. Conclusion: We have developed a novel treatment technique for partial or full irradiation of dorsal mammary tumors incorporating lung sparing.The technique will be useful for exploring the phenomena of aggressive tumor phenotype that may arise from miss-irradiation.

60 APPLIED LIFE SCIENCES↗

Software Synthesis for High Productivity Exascale Computing

Over the three years of our project, we accomplished three key milestones: We demonstrated how ideas from generative programming and software synthesis can help support the development of bulk-synchronous distributed memory kernels. These ideas are realized in a new language called MSL, a C-like language that combines synthesis features with high level notations for array manipulation and bulk-synchronous parallelism to simplify the semantic analysis required for synthesis. We also demonstrated that these high level notations map easily to low level C code and show that the performance of this generated code matches that of handwritten Fortran. Second, we introduced the idea of solver-aided domain-specific languages (SDSLs), which are an emerging class of computer-aided programming systems. SDSLs ease the construction of programs by automating tasks such as verification, debugging, synthesis, and non-deterministic execution. SDSLs are implemented by translating the DSL program into logical constraints. Next, we developed a symbolic virtual machine called Rosette, which simplifies the construction of such SDSLs and their compilers. We have used Rosette to build SynthCL, a subset of OpenCL that supports synthesis. Third, we developed novel numeric algorithms that move as little data as possible, either between levels of a memory hierarchy or between parallel processors over a network. We achieved progress in three aspects of this problem. First we determined lower bounds on communication. Second, we compared these lower bounds to widely used versions of these algorithms, and noted that these widely used algorithms usually communicate asymptotically more than is necessary. Third, we identified or invented new algorithms for most linear algebra problems that do attain these lower bounds, and demonstrated large speed-ups in theory and practice.

97 MATHEMATICS AND COMPUTING↗

O(N) Quantum Molecular Dynamics (QMD) Algorithms, Code Requirements, Release Notes, and Library Deployment

The Exascale Computing Project (ECP) Co-design Center for Particle Applications (CoPA) is addressing the challenges for particle applications to run on upcoming exascale computing architectures. This includes short- and long-range molecular dynamics (MD), particle-in-cell (PIC), and quantum molecular dynamics (QMD). This document addresses $\mathcal{O}(N)$ QMD. The goal of this CoPA team is to develop $\mathcal{O}(N)$ linear scaling methods for QMD optimized for new and next generation architectures. This will provide the capability to simulate larger systems and run for longer timeframes than is possible today. Focus is initially on the density matrix construction. This requires efficient matrix formats and linear algebra operations for distributed architectures. A significant reduction in the wallclock time for an MD timestep is necessary to achieve practical large scale QMD. Equally challenging is to develop scalable distributed implementations. This requires the exploration of efficient data formats (dense, sparse, etc.), data decomposition and distribution across compute nodes using block- and graph-based methods. Traditional programming models such as MPI/OpenMP, hybrid MPI/OpenMP/Accelerator, as well as asynchronous task-based models will be explored to achieve maximum parallelism. Parallelism at the level of a matrix operation, solver, and/or application needs to be explored to gain the most benefit on new and emerging architectures. This report serves as a “living document” of the additions and enhancements throughout the ECP CoPA project for $\mathcal{O}(N)$ QMD. The following sections address the applications we are working with, the quantum chemistry libraries (BML and PROGRESS), and our co-design exploration through the use of a proxy application.

36 MATERIALS SCIENCE↗