Search NASA⌕ Search

SEARCH · Search NASA

Results for “efficiency maximization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

In-Space Engine (ISE-100) Development - Design Verification Test

In the past decade, NASA has formulated science mission concepts with an anticipation of landing spacecraft on the lunar surface, meteoroids, and other planets. Advancing thruster technology for spacecraft propulsion systems has been considered for maximizing science payload. Starting in 2010, development of In-Space Engine (designated as ISE-100) has been carried out. ISE-100 thruster is designed based on heritage Missile Defense Agency (MDA) technology aimed for a lightweight and efficient system in terms volume and packaging. It runs with a hypergolic bi-propellant system: MON-25 (nitrogen tetroxide, N2O4, with 25% of nitric oxide, NO) and MMH (monomethylhydrazine, CH6N2) for NASA spacecraft applications. The utilization of this propellant system will provide a propulsion system capable of operating at wide range of temperatures, from 50 C (122 F) down to -30 C (-22 F) to drastically reduce heater power. The thruster is designed to deliver 100 lb(sub f) of thrust with the capability of a pulse mode operation for a wide range of mission duty cycles (MDCs). Two thrusters were fabricated. As part of the engine development, this test campaign is dedicated for the design verification of the thruster. This presentation will report the efforts of the design verification hot-fire test program of the ISE-100 thruster in collaboration between NASA Marshall Space Flight Center (MSFC) and Aerojet Rocketdyne (AR) test teams. The hot-fire tests were conducted at Advance Mobile Propulsion Test (AMPT) facility in Durango, Colorado, from May 13 to June 10, 2016. This presentation will also provide a summary of key points from the test results.

Trinh, Huu P.↗
NASA NTRSDate not supplied

Integration of Structural Analysis and Manufacturing Process Planning for Global Optimization with Automated Fiber Placement

Design of mass-efficient composite structures intended for Automated Fiber Placement (AFP) requires close interaction between structural analysis and manufacturing process planning. Tools exist for each of these disciplines, but software interplay has been insufficient for rapid and efficient design iteration. Within the NASA Advanced Composites Consortium (ACC), the Design for Manufacturing (DFM) task has made significant progress towards linking these disciplines and respective software – HyperX (design), CAPP (process planning), and VCP (tool path generation). The initial focus in previous work was on data exchange between disciplines. The ability to both export and consume composite design and manufacturing data to and from each tool. This paper focuses on the effort to automate and streamline the connection between the tools listed above, with the goal of being able to automatically generate a composite AFP design that is mass-efficient and manufacturable. The optimization method being pursued is a bi-level approach, where each tool performs optimization within its discipline. The optimization in HyperX is focused on mass and laminate strength, while CAPP is focused on maximizing manufacturability. VCP is used to generate fiber paths for each design iteration. These sub-processes are wrapped with a global level optimization, driven by HyperX, used to converge the design. This paper describes the current state of this effort, which is a completed HyperX-VCP iteration loop and initial work on the HyperX-CAPP iteration loop. Additionally, example results are shown for a wind blade structure with double curvature.

Automated Fiber Placement↗
DOE OSTI2021

Life Cycle Assessment of Pasture-based Agrivoltaic Systems: Emissions and Energy Use of Integrated Rabbit Production

Agrivoltaic systems, which deliberately maximize the utility of a single parcel of land for both solar photovoltaic (PV) electricity production and agriculture, have been demonstrated as a viable technology that can ameliorate competing land uses and meet growing energy and food demands efficiently. The goal of this study is to assess the environmental impacts of a novel pasture-based agrivoltaic concept: co-farming rabbits and solar PV. A life cycle assessment (LCA) quantified the impacts of 1) the integrated agrivoltaic concept in comparison to conventional practices including 2) separate rabbit farming and PV production and 3) separate rabbit farming and conventional electricity production. The impact assessment methods employed to determine the environmental impacts were IPCC 2013 global warming potential 100a V1.03 and fossil energy demand V1.11. The results indicate that the pasture-based agrivoltaic system produces the least amount of greenhouse gas emissions (3.8 million kg CO₂ equivalent) and demands the least amount of fossil energy (46 million MJ) per functional unit of cumulative MWh output of electricity and cumulative kg of meat over 30 years in comparison to the two other scenarios under study. The pasture-based agrivoltaic system features a dual synergy that consequently produces 69.3% less emissions and demands 82.9% less fossil energy compared to non-integrated production. The potential for agrivoltaic systems to significantly reduce environmental impacts revealed by this LCA, which was limited to emissions and fossil energy demand, demonstrates that integrated solar and pasture-based agricultural systems are superior to conventional practices in terms of their comparatively lower emission and energy intensity. These findings provide empirical support for increased agrivoltaic system development more broadly.

14 SOLAR ENERGY↗
DOE OSTI2016

A Study on Reconstruction of Intra-Pin Information in Pin-Wise Reactor Analysis

Along with nodal calculation, accurate pin-wise calculations with parallel computational platforms have been recently developed as alternative tools to nodal methods to maximize core performance and minimize uncertainties used in reactor safety analysis. Therefore, it is necessary to have a method for accurately reconstructing intra-pin information comparable to whole-core transport calculation while being significantly more computationally efficient. In this study, a method to reconstruct intra-pin information (intra-pin reconstruction) is proposed. This method is based on combining the local intra-pin form function with the global homogeneous distribution. The form functions are generated from a single pin calculation with reflective boundary conditions using Serpent 2, a Monte Carlo neutron transport code. The global homogeneous flux was reconstructed using the analytical solution of the diffusion equation due to its superior accuracy and speed compared to other methods. The study here is limited to a two-dimensional two-group problem of rectangular geometric fuel pin element. The pin-wise boundary constraints (BCs) and reference intra-pin power used for reconstruction and comparison were obtained from the Serpent 2 reference calculation. From our study, it is indicated that maximum relative error (MRE) between reconstructed and reference values is within 5%. In addition, a sensitivity study was also performed to assess the feasibility of the method when the proposed method is coupled with a pin-wise calculation. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Exchange Coupling Determines Metal-Dependent Efficiency for Iron- and Cobalt-Catalyzed Photochemical CO 2 Reduction

Catalysts promoting multielectron charge delocalization offer selectivity for the CO 2 reduction reaction (CO 2 RR) over the competing hydrogen evolution reaction. Here, we show metal–ligand exchange coupling as an example of charge delocalization that can determine the efficiency for photocatalytic CO 2 RR. A comparative evaluation of iron and cobalt complexes supported by the redox-active ligand tpyPY2Me establishes that the two-electron reduction of [Co(tpyPY2Me)] 2+ ([Co] 2+ ) occurs at potentials 770 mV more negative than the [Fe(tpyPY2Me)] 2+ ([Fe] 2+ ) analogue by maximizing the exchange coupling in the latter compound. The positive shift in the reduction potential promoted by metal–ligand exchange coupling drives [Fe] 2+ to be among the most active and selective molecular catalysts for photochemical CO 2 RR reported to date, maintaining up to 99% CO product selectivity with total turnover numbers (TONs) and initial turnover frequencies exceeding 30,000 and 900 min –1 , respectively. In contrast, [Co] 2+ shows much lower CO 2 RR activity, reaching only ca. 600 TON at 83% CO product selectivity under similar conditions accompanied by rapid catalyst decomposition. Further, the spin density plots of the two-electron reduced [Co] 0 complex implicate a paramagnetic open-shell doublet ground state compared to the diamagnetic open-shell singlet ground state of reduced [Fe] 0 , rationalizing the observed negative shift in two-electron reduction potentials from the [M] 2+ species and lowered CO 2 RR efficiency for the cobalt complex relative to its iron congener. This work emphasizes the contributions of multielectron metal–ligand exchange coupling in promoting effective CO 2 RR and provides a starting point for the broader incorporation of this strategy in catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Increasing markets and decreasing package weight for high-specific-power photovoltaics

We report that thin-film and emerging technologies in photovoltaics (PV) offer advantages for lightweight, flexible power over the rigid silicon panels that dominate the present market. One important advantage is high specific power (the power-to-weight ratio). Here we consider niche market size, price points and value propositions that can provide a path for new PV market entrants. Examining the cost-production experience curves of Si, CdTe and CIGS PV suggests that a minimum market size of US$0.2-1 billion is required to incubate a new market entrant. Several markets requiring high specific power meet this threshold. We assess the critical role of the substrate, packaging and interconnects and provide a quantitative assessment of pathways to maximize specific power. With all requisite components included, along with requirements for safety and reliability, we estimate a lower bound for a durable lightweight module at about 300-500 g m -2 . Lastly, pairing this bound with a 15%-efficiency thin-film or 35%-efficiency III-V module would yield specific powers up to 500 W kg -1 or 1,167 W kg -1 , respectively.

14 SOLAR ENERGY↗
DOE OSTI2014

Radiative thermal rectification using superconducting materials

Thermal rectification can be defined as an asymmetry in the heat flux when the temperature difference between two interacting thermal reservoirs is reversed. In this Letter, we present a far-field radiative thermal rectifier based on high-temperature superconducting materials with a rectification ratio up to 80%. This value is among the highest reported in literature. Two configurations are examined: a superconductor (Tl{sub 2}Ba{sub 2}CaCu{sub 2}O{sub 8}) exchanging heat with (1) a black body and (2) another superconductor, YBa{sub 2}Cu{sub 3}O{sub 7} in this case. The first configuration shows a higher maximal rectification ratio. Besides, we show that the two-superconductor rectifier exhibits different rectification regimes depending on the choice of the reference temperature, i.e., the temperature of the thermostat. Presented results might be useful for energy conversion devices, efficient cryogenic radiative insulators engineering, and thermal logical circuits’ development.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Delocalized Excitation Transfer in Open Quantum Systems with Long-Range Interactions

The interplay between coherence and system-environment interactions is at the basis of a wide range of phenomena, from quantum information processing to charge and energy transfer in molecular systems, biomolecules, and photochemical materials. In this work, we use a Frenkel exciton model with long-range interacting qubits coupled to a damped collective bosonic mode to investigate vibrationally assisted transfer processes in donor-acceptor systems featuring internal substructures analogous to light-harvesting complexes. We find that certain delocalized excitonic states maximize the transfer rate and that the entanglement is preserved during the dissipative transfer over a wide range of parameters. We investigate the reduction in transfer caused by static disorder, white noise, and finite temperature and study how transfer efficiency scales as a function of the number of dimerized monomers and the component number of each monomer, finding which excitonic states lead to optimal transfer. Finally, we provide a realistic experimental setting to realize this model in analog trapped-ion quantum simulators. Analog quantum simulation of systems comprising many and increasingly complex monomers could offer valuable insights into the design of light-harvesting materials, particularly in the nonperturbative intermediate parameter regime examined in this study, where classical simulation methods are resource intensive.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Time Series Classification for Locating Forced Oscillation Sources

Here, this article presents a machine learning based time-series classification method for using synchrophasor measurements to locate the source of forced oscillation (FO) for fast disturbance removal. First, multivariate time series (MTS) matrices are constructed by the most informative measurements selected by sequential feature selection from each power plant. Then, the Mahalanobis matrix is trained such that the Mahalanobis distance between the MTSs from the same class (i.e., with the same FO source location) are minimized and from different classes (i.e., with different FO source locations) are maximized. This allows MTSs to be classified by classifiers with class membership corresponding to the location of each FO source. To meet the runtime requirements of online matching, class templates are constructed to reduce data size and improve matching efficiency. To account for uncertainty in identifying the exact beginning of an FO event, dynamic time warping is used to align the out-of-sync MTSs. IEEE 39bus and WECC 179bus systems are used for algorithm development and validation. Simulation results demonstrate that the algorithm meets online operation runtime requirement with high accuracy using misaligned data sets.

42 ENGINEERING↗
DOE OSTI2021

Redundancy in Aromatic O -Demethylation and Ring-Opening Reactions in Novosphingobium aromaticivorans and Their Impact in the Metabolism of Plant-Derived Phenolics

ABSTRACT Lignin is a plant heteropolymer composed of phenolic subunits. Because of its heterogeneity and recalcitrance, the development of efficient methods for its valorization still remains an open challenge. One approach to utilize lignin is its chemical deconstruction into mixtures of monomeric phenolic compounds, followed by biological funneling into a single product. Novosphingobium aromaticivorans DSM 12444 has been previously engineered to produce 2-pyrone-4,6-dicarboxylic acid (PDC) from depolymerized lignin by simultaneously metabolizing multiple aromatics through convergent routes involving the intermediates 3-methoxygallic acid (3-MGA) and protocatechuic acid (PCA). We investigated enzymes predicted to be responsible for O -demethylation and oxidative aromatic ring opening, two critical reactions involved in the metabolism of phenolic compounds by N. aromaticivorans . The results showed the involvement of DesA in O -demethylation of syringic and vanillic acids, LigM in O- demethylation of vanillic acid and 3-MGA, and a new O- demethylase, DmtS, in the conversion of 3-MGA into gallic acid (GA). In addition, we found that LigAB was the main aromatic ring-opening dioxygenase involved in 3-MGA, PCA, and GA metabolism and that a previously uncharacterized dioxygenase, LigAB2, had high activity with GA. Our results indicate a metabolic route not previously identified in N. aromaticivorans that involves O -demethylation of 3-MGA to GA. We predict that this pathway channels ∼15% of the carbon flow from syringic acid, with the rest following ring opening of 3-MGA. The new knowledge obtained in this study allowed for the creation of an improved engineered strain for the funneling of aromatic compounds that exhibits stoichiometric conversion of syringic acid into PDC. IMPORTANCE For lignocellulosic biorefineries to effectively contribute to reduction of fossil fuel use, they need to become efficient at producing chemicals from all major components of plant biomass. Making products from lignin will require engineering microorganisms to funnel multiple phenolic compounds to the chemicals of interest, and N. aromaticivorans is a promising chassis for this technology. The ability of N. aromaticivorans to efficiently and simultaneously degrade many phenolic compounds may be linked to having functionally redundant aromatic degradation pathways and enzymes with broad substrate specificity. A detailed knowledge of aromatic degradation pathways is thus essential to identify genetic engineering targets to maximize product yields. Furthermore, knowledge of enzyme substrate specificity is critical to redirect flow of carbon to desired pathways. This study described an uncharacterized pathway in N. aromaticivorans and the enzymes that participate in this pathway, allowing the engineering of an improved strain for production of PDC from lignin.

Biotechnology & Applied Microbiology↗
DOE OSTI2024

Numerical methods for fractional Fokker–Planck equation with multiplicative Marcus Lévy noises

The Fokker–Planck equation (FPE) is an important deterministic tool for investigating stochastic dynamical systems. In this paper, we consider the space-time fractional FPE driven by multiplicative Marcus Lévy noises. Efficient numerical schemes are presented to solve the equations. Stability and convergence of the methods are also discussed. We give some numerical experiments to validate our schemes, and examine the effects of parameters on solutions. Additionally, we analyze the maximal likely trajectories and the critical time for the change of the most probability location.

Mathematics↗
DOE OSTI2023

Bringing high-efficiency silicon solar cells with heterojunction contacts to market with a new, versatile deposition technique

Silicon heterojunction (SHJ) and tunnel-oxide-passivated-contacts (TOPCon) solar cells are the future for silicon technology after passivated-emitter-and-rear-contact (PERC) cells. However, the tool costs (CapEx) for SHJ (TOPCon) make the cell lines more than 2 (1.5) times of the cost of the PERC, which hinders the wide adoption these new technologies despite higher efficiencies. A common challenge for both cell types is that the passivation layers are sensitive to sputter damage. Furthermore, for TOPCon cells, it is desirable to have an inline (instead of batch) process for tunnel oxide and polysilicon to maximize the throughput and thus reduce the operation cost.

14 SOLAR ENERGY↗
DOE OSTI2025

Recovery Simulator and Analysis Formulation: Mathematical Framework for Enhanced Resilience and Resource Allocation

This report introduces recovery simulator and analysis (RSA), a framework aimed at enhancing the resilience of electrical grids post-disruption. The RSA model leverages an optimization problem formulation that focuses on maximizing the load served (or optionally customers served) through a coordinated and cooptimized recovery of non-black start generation, transmission lines, feeders and substations subject to labor budget constraints. By integrating advanced linear programming techniques, the simulator selects efficient reocovery pathways, optimizing both short-term and long-term grid recovery strategies. The mathematical framework guides decision-making through a comprehensive evaluation of potential recovery actions, factoring in the trade-offs between labor constraints and load (or optionally customer) restoration efficacy. This enables grid operators to simulate diverse outage scenarios and delineate optimal recovery pathways, thereby prioritizing critical repair tasks and ensuring resource allocation is both economical and effective. The intended use case of RSA is to allow planners to explore many recovery scenarios quickly and determine assets most critical across a wide range of scenarios, and therefore strong candidates for hardening or additional investment. RSA might also be used in an operational setting, following a single event, for exploring efficient recovery pathways.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1986

Measuring Hole Elongation in Bolted Joints

Measurement does not affect joint parameters. Verification of analytical and strength-prediction methods for bolted composite joints based generally on data obtained experimentally from double-lap-joint specimens. In mechanically fastened joints, stresses maximal at fastener holes. Ability to measure accurately hole elongations without affecting joint parameters provides better understanding of elastic and plastic behavior of joint material leading to failure mechanisms in mechanically fastened joints required for design of more-efficient, lightweight composite joints.

Wichorek, G. R.↗
NASA NTRS2009

GEMS

The prime scientific objectives of the Gravity and Extreme Magnetism SMEX, GEMS, are to determine the effects of the spin of black holes, the configurations of the magnetic fields of magnetars, and the structure of the supernova shocks which accelerate cosmic rays. In the cases of both stellar black holes and supermassive black holes, sensitivity to 1% polarization is needed to make diagnostic measurements of the net polarizations predicted for probable disk and corona models. GEMS can reach this goal for several Seyferts and quasars and measure the polarizations of representatives of a variety of other classes of X-ray sources, such as rotation-powered and accretion-powered pulsars. GEMS uses foil mirrors to maximize the collecting area achievable within the SMEX constraints. The polarimeters at the mirror foci are Time Projection Chambers which use the photoelectic effect to measure the polarization of the incident photon. We have built laboratory models with good efficiency and modulation in the 2-10 keV range. An attached small student experiment would add 0.5 keV sensitivity for bright soft sources. The instrument has a point spread function which allows measurement of structures in the brighter nearby supernova remnants. GEMS' Orbital Sciences spacecraft will rotate at a rate of 0.1 revolutions per minute during observations, so that systematic errors due to the detector can be detected and corrected. A program of 35 sources can be observed in 9 months. GEMS is designed for a two year lifetime which will allow a General Observer program that would more than double the number of sources measured. For subsets of black holes, neutron stars and supernova remnants, GEMS will measure the polarization of several sources, solving important questions while establishing the sensitivity required for future missions.

Swank, Jean↗
NASA NTRS2011

The Dolinar Receiver in an Information Theoretic Framework

Optical communication at the quantum limit requires that measurements on the optical field be maximally informative, but devising physical measurements that accomplish this objective has proven challenging. The Dolinar receiver exemplifies a rare instance of success in distinguishing between two coherent states: an adaptive local oscillator is mixed with the signal prior to photodetection, which yields an error probability that meets the Helstrom lower bound with equality. Here we apply the same local-oscillator-based architecture with aninformation-theoretic optimization criterion. We begin with analysis of this receiver in a general framework for an arbitrary coherent-state modulation alphabet, and then we concentrate on two relevant examples. First, we study a binary antipodal alphabet and show that the Dolinar receiver's feedback function not only minimizes the probability of error, but also maximizes the mutual information. Next, we study ternary modulation consistingof antipodal coherent states and the vacuum state. We derive an analytic expression for a near-optimal local oscillator feedback function, and, via simulation, we determine its photon information efficiency (PIE). We provide the PIE versus dimensional information efficiency (DIE) trade-off curve and show that this modulation and the our receiver combination performs universally better than (generalized) on-off keying plus photoncounting, although, the advantage asymptotically vanishes as the bits-per-photon diverges towards infinity.

optical communications↗
NASA NTRS2020

On the Maximum Stellar Rotation to Form a Black Hole without an Accompanying Luminous Transient

The collapse of a massive star with low angular momentum content is commonly argued to result in the formation of a black hole without an accompanying bright transient. Our goal in this Letter is to understand the flow in and around a newly-formed black hole, involving accretion and rotation, via general relativistic hydrodynamics simulations aimed at studying the conditions under which infalling material can accrete without forming a centrifugally supported structure and, as a result, generate no effective feedback. If the feedback from the black hole is, on the other hand, significant, the collapse would be halted and we suggest that the event is likely to be followed by a bright transient. We find that feedback is only efficient if the specific angular momentum of the infalling material at the innermost stable circular orbit exceeds that of geodesic circular flow at that radius by at least≈20%. We use the results of our simulations to constrain the maximal stellar rotation rates of the disappearing massive progenitors PHL293B-LBV and N6946-BH1, and to provide an estimate of the overall rate of disappearing massive stars. We find that about a few percent of single O-type stars with measured rotational velocities are expected to spin below the critical value before collapse and are thus predicted to vanish without a trace.

Scott C Noble↗
NASA NTRSDate not supplied

Adjoint-Based Minimization of X-59 Sonic Boom Noise Via Control Surfaces

A multidisciplinary design optimization methodology to directly minimize the ground-level noise generated by a supersonic aircraft's sonic boom is presented. A gradient-based optimizer is coupled with a Cartesian Euler flow solver and an atmospheric propagation tool to forge a unique design capability. Adjoint formulations for both the flow solver and propagation tool are also coupled to provide sensitivities in an efficient manner. The design method is demonstrated on the X-59 Low-Boom Flight Demonstrator by optimizing control surface deflections to improve ground-level noise while maintaining trimmed cruise flight. Two noise minimization examples and a noise maximization are presented. All optimized designs result in measurable improvement in the ground-level noise objective. Extensive surveys of the design space confirm that the optimization method is effective in finding a local optimum. Moreover, repeated application of the method with varying initial design points also demonstrates the robustness of the method.

ARMD↗