Search NASA⌕ Search

SEARCH · Search NASA

Results for “grid code”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

A Non-Cut Cell Immersed Boundary Method for Use in Icing Simulations

This paper describes a computational fluid dynamic method used for modelling changes in aircraft geometry due to icing. While an aircraft undergoes icing, the accumulated ice results in a geometric alteration of the aerodynamic surfaces. In computational simulations for icing, it is necessary that the corresponding geometric change is taken into consideration. The method used, herein, for the representation of the geometric change due to icing is a non-cut cell Immersed Boundary Method (IBM). Computational cells that are in a body fitted grid of a clean aerodynamic geometry that are inside a predicted ice formation are identified. An IBM is then used to change these cells from being active computational cells to having properties of viscous solid bodies. This method has been implemented in the NASA developed node centered, finite volume computational fluid dynamics code, FUN3D. The presented capability is tested for two-dimensional airfoils including a clean airfoil, an iced airfoil, and an airfoil in harmonic pitching motion about its quarter chord. For these simulations velocity contours, pressure distributions, coefficients of lift, coefficients of drag, and coefficients of pitching moment about the airfoil's quarter chord are computed and used for comparison against experimental results, a higher order panel method code with viscous effects, XFOIL, and the results from FUN3D's original solution process. The results of the IBM simulations show that the accuracy of the IBM compares satisfactorily with the experimental results, XFOIL results, and the results from FUN3D's original solution process.

Sarofeen, Christian M.↗

Comparison of Computed and Measured Vortex Evolution for a UH-60A Rotor in Forward Flight

A Computational Fluid Dynamics (CFD) simulation using the Navier-Stokes equations was performed to determine the evolutionary and dynamical characteristics of the vortex flowfield for a highly flexible aeroelastic UH-60A rotor in forward flight. The experimental wake data were acquired using Particle Image Velocimetry (PIV) during a test of the fullscale UH-60A rotor in the National Full-Scale Aerodynamics Complex 40- by 80-Foot Wind Tunnel. The PIV measurements were made in a stationary cross-flow plane at 90 deg rotor azimuth. The CFD simulation was performed using the OVERFLOW CFD solver loosely coupled with the rotorcraft comprehensive code CAMRAD II. Characteristics of vortices captured in the PIV plane from different blades are compared with CFD calculations. The blade airloads were calculated using two different turbulence models. A limited spatial, temporal, and CFD/comprehensive-code coupling sensitivity analysis was performed in order to verify the unsteady helicopter simulations with a moving rotor grid system.

Evolution↗

A System of Conservative Regridding for Ice-Atmosphere Coupling in a General Circulation Model (GCM)

The method of elevation classes, in which the ice surface model is run at multiple elevations within each grid cell, has proven to be a useful way for a low-resolution atmosphere inside a general circulation model (GCM) to produce high-resolution downscaled surface mass balance fields for use in one-way studies coupling atmospheres and ice flow models. Past uses of elevation classes have failed to conserve mass and energy because the transformation used to regrid to the atmosphere was inconsistent with the transformation used to downscale to the ice model. This would cause problems for two-way coupling. A strategy that resolves this conservation issue has been designed and is presented here. The approach identifies three grids between which data must be regridded and five transformations between those grids required by a typical coupled atmosphere-ice flow model. This paper develops a theoretical framework for the problem and shows how each of these transformations may be achieved in a consistent, conservative manner. These transformations are implemented in Glint2, a library used to couple atmosphere models with ice models. Source code and documentation are available for download. Confounding real-world issues are discussed, including the use of projections for ice modeling, how to handle dynamically changing ice geometry, and modifications required for finite element ice models.

Ice-atmosphere↗

The Suomi National Polar-Orbiting Partnership (SNPP): Continuing NASA Research and Applications

The Suomi National Polar-orbiting Partnership (SNPP) satellite was successfully launched into a polar orbit on October 28, 2011 carrying 5 remote sensing instruments designed to provide data to improve weather forecasts and to increase understanding of long-term climate change. SNPP provides operational continuity of satellite-based observations for NOAA's Polar-orbiting Operational Environmental Satellites (POES) and continues the long-term record of climate quality observations established by NASA's Earth Observing System (EOS) satellites. In the 2003 to 2011 pre-launch timeframe, NASA's SNPP Science Team assessed the adequacy of the operational Raw Data Records (RDRs), Sensor Data Records (SDRs), and Environmental Data Records (EDRs) from the SNPP instruments for use in NASA Earth Science research, examined the operational algorithms used to produce those data records, and proposed a path forward for the production of climate quality products from SNPP. In order to perform these tasks, a distributed data system, the NASA Science Data Segment (SDS), ingested RDRs, SDRs, and EDRs from the NOAA Archive and Distribution and Interface Data Processing Segments, ADS and IDPS, respectively. The SDS also obtained operational algorithms for evaluation purposes from the NOAA Government Resource for Algorithm Verification, Independent Testing and Evaluation (GRAVITE). Within the NASA SDS, five Product Evaluation and Test Elements (PEATEs) received, ingested, and stored data and performed NASA's data processing, evaluation, and analysis activities. The distributed nature of this data distribution system was established by physically housing each PEATE within one of five Climate Analysis Research Systems (CARS) located at either at a NASA or a university institution. The CARS were organized around 5 key EDRs directly in support of the following NASA Earth Science focus areas: atmospheric sounding, ocean, land, ozone, and atmospheric composition products. The PEATES provided the system level interface with members of the NASA SNPP Science Team and other science investigators within each CARS. A sixth Earth Radiation Budget CARS was established at NASA Langley Research Center (NASA LaRC) to support instrument performance, data evaluation, and analysis for the SNPP Clouds and the Earth's Radiant Budget Energy System (CERES) instrument. Following the 2011 launch of SNPP, spacecraft commissioning, and instrument activation, the NASA SNPP Science Team evaluated the operational RDRs, SDRs, and EDRs produced by the NOAA ADS and IDPS. A key part in that evaluation was the NASA Science Team's independent processing of operational RDRs and SDRs to EDRs using the latest NASA science algorithms. The NASA science evaluation was completed in the December 2012 to April 2014 timeframe with the release of a series of NASA Science Team Discipline Reports. In summary, these reports indicated that the RDRs produced by the SNPP instruments were of sufficiently high quality to be used to create data products suitable for NASA Earth System science and applications. However, the quality of the SDRs and EDRs were found to vary greatly when considering suitability for NASA science. The need for improvements in operational algorithms, adoption of different algorithmic approaches, greater monitoring of on-orbit instrument calibration, greater attention to data product validation, and data reprocessing were prominent findings in the reports. In response to these findings, NASA, in late 2013, directed the NASA SNPP Science Team to use SNPP instrument data to develop data products of sufficiently high quality to enable the continuation of EOS time series data records and to develop innovative, practical applications of SNPP data. This direction necessitated a transition of the SDS data system from its pre-launch assessment mode to one of full data processing and production. To do this, the PEATES, which served as NASA's data product testing environment during the prelaunch and early on-orbit periods, were transitioned to Science Investigator-led Processing Systems (SIPS). The distributed data architecture was maintained in this new system by locating the SIPS at the same institutions at which the CARS and PEATES were located. The SIPS acquire raw SNPP instrument Level 0 (i.e. RDR) data over the full SNPP mission from the NOAA ADS and IDPS through the NASA SDS Data Distribution and Depository Element (SD3E). The SIPS process those data into NASA Level 1, Level 2, and global, gridded Level 3 standard products using peer-reviewed algorithms provided by members of the NASA Science Team. The SIPS work with the NASA SNPP Science Team in obtaining enhanced, refined, or alternate real-time algorithms to support the capabilities of the Direct Readout Laboratory (DRL). All data products, algorithm source codes, coefficients, and auxiliary data used in product generation are archived in an assigned NASA Distributed Active Archive Center (DAAC).

remote sensing↗

Verification of a Fluid-Based Plasma-Edge Model Within the Multiphysics Object-Oriented Simulation Environment (MOOSE) Framework

As the goal of achieving fusion power on the grid comes closer to fruition, fully coupled multiphysics models of fusion devices will be crucial. These models must incorporate the interconnected phenomena of these devices, including plasma physics, neutronics, first wall interactions, and tritium transport. Currently, there are two main approaches to developing these platforms: (1) loosely coupled, where one couples existing codes and solvers together through input and output parameters and data, and (2) tightly coupled, where one develops the necessary models within a singular, integrated framework. This work focuses on the latter approach for magnetically confined fusion devices by developing a fluid-based plasma-edge model within the Multiphysics Object Oriented Simulation Environment (MOOSE) Framework. This effort is coordinated with other efforts to develop, test, demonstrate, and deploy fusion relevant multiphysics capabilities including electromagnetics, particle-in-cell plasma, tritium transport, and fusion blanket design. This new model is an expansion of the MOOSE-based plasma application, Zapdos, which was originally formulated to model low-temperature, non-magnetized plasma processes. Verification studies have been conducted using newly developed magnetic plasma capabilities. These involved convergence analyses utilizing the method of manufactured solutions to verify new operators and case studies. A modular approach was taken here to demonstrate increasingly complicated simulation scenarios, which included a singular fluid with uniform magnetic field case, a singular fluid with spatially varying magnetic field case, and a coupled multifluid case.

70 - PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Data Access Services that Make Remote Sensing Data Easier to Use

This slide presentation reviews some of the processes that NASA uses to make the remote sensing data easy to use over the World Wide Web. This work involves much research into data formats, geolocation structures and quality indicators, often to be followed by coding a preprocessing program. Only then are the data usable within the analysis tool of choice. The Goddard Earth Sciences Data and Information Services Center is deploying a variety of data access services that are designed to dramatically shorten the time consumed in the data preparation step. On-the-fly conversion to the standard network Common Data Form (netCDF) format with Climate-Forecast (CF) conventions imposes a standard coordinate system framework that makes data instantly readable through several tools, such as the Integrated Data Viewer, Gridded Analysis and Display System, Panoply and Ferret. A similar benefit is achieved by serving data through the Open Source Project for a Network Data Access Protocol (OPeNDAP), which also provides subsetting. The Data Quality Screening Service goes a step further in filtering out data points based on quality control flags, based on science team recommendations or user-specified criteria. Further still is the Giovanni online analysis system which goes beyond handling formatting and quality to provide visualization and basic statistics of the data. This general approach of automating the preparation steps has the important added benefit of enabling use of the data by non-human users (i.e., computer programs), which often make sub-optimal use of the available data due to the need to hard-code data preparation on the client side.

Lynnes, Christopher↗

A Multi-Architecture Approach for Implicit Computational Fluid Dynamics on Unstructured Grids

High-performance computing (HPC) architectures are trending toward manycore paradigms such as graphics processing units (GPUs). Approximately half of the top 100 publicly disclosed supercomputers in the world utilize GPU accelerators for performance. This is in contrast to a decade ago, where there were only a few such machines in the top 100. It is not currently possible to compile and run legacy central processing unit (CPU) software efficiently on GPUs without significant refactoring. Though a number of frameworks offering performance portability exist, none offer a standardized specification that is supported by all major hardware vendors. Additionally, experiences show that obtaining a high percentage of peak performance often requires architecture-specific code. This work details a pragmatic multi-architecture computational fluid dynamics library focused on aerospace problems across the speed range from low subsonic to hypersonic flows involving thermochemical nonequilibrium. A thin abstraction layer above NVIDIA CUDA C++ is utilized, which enables primarily single-source software currently capable of running efficiently on multicore CPUs, NVIDIA GPUs, AMD GPUs, and Intel GPUs. Results on various problems of interest across the speed range are presented and performance is compared between various architectures.

GPU↗

A Multi-Architecture Approach for Implicit Computational Fluid Dynamics on Unstructured Grids

High-performance computing (HPC) architectures are trending toward manycore paradigms such as graphics processing units (GPUs). Approximately half of the top 100 publicly disclosed supercomputers in the world utilize GPU accelerators for performance. This is in contrast to a decade ago, where there were only a few such machines in the top 100. It is not currently possible to compile and run legacy central processing unit (CPU) software efficiently on GPUs without significant refactoring. Though a number of frameworks offering performance portability exist, none offer a standardized specification that is supported by all major hardware vendors. Additionally, experiences show that obtaining a high percentage of peak performance often requires architecture-specific code. This work details a pragmatic multi-architecture computational fluid dynamics library focused on aerospace problems across the speed range from low subsonic to hypersonic flows involving thermochemical nonequilibrium. A thin abstraction layer above NVIDIA CUDA C++ is utilized, which enables primarily single-source software currently capable of running efficiently on multicore CPUs, NVIDIA GPUs, AMD GPUs, and Intel GPUs. Results on various problems of interest across the speed range are presented and performance is compared between various architectures.

GPU↗

REopt Lite User Manual

REopt Lite evaluates the economic viability of grid-connected solar photovoltaics, wind, combined heat and power, and electric and thermal storage at commercial and small industrial sites. It allows building owners to identify the system sizes and dispatch strategies that minimize the site’s life cycle cost of energy. REopt Lite also estimates the amount of time on-site generation and storage can sustain the site's critical load during a grid outage and allows the user the choice of optimizing for energy resilience. It is primarily used to inform project development decisions and to support research on the factors that drive project feasibility for market development and policy analysis. It is available through a web interface, application programing interface, and open-source code. This user manual provides an overview of the model, including its capabilities and typical applications; inputs and outputs; economic calculations; technology descriptions; and model parameters, variables, and equations. The model is highly flexible and is continually evolving to meet the needs of each analysis. Therefore, this report is not an exhaustive description of all capabilities, but rather a summary of the core components of the model.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Numerical investigation of three-dimensional flow separation using the boundary layer equations

The steady, incompressible, three-dimensional laminar and turbulent boundary-layer equations are solved in a streamline coordinate system and in a self-adaptive grid system using Matsuno's finite difference method. Techniques are described for calculating laminar and turbulent separation using the boundary-layer equations. Any type (bubble type or free vortex-layer type) of major separation line can be calculated at an angle of attack on ellipsoids of revolution by this boundary layer code. Results are presented for ellipsoids of revolution at angles of attack up to 45 degrees. Agreements with other numerical and experimental results are very good for laminar flows. Turbulent flows are also investigated with algebraic turbulence models proposed by Rotta and Cebeci and Smith. Good agreement with experimental results was obtained at a small angle of attack (10 degrees) but only qualitative agreement was obtained at a high angle of attack (30 degrees) for turbulent flow on a 6:1 ellipsoid of revolution.

Wie, Yong-Sun↗

Heat transfer and pressure comparisons between computation and wind tunnel for a research hypersonic aircraft

Comparisons between solutions obtained with a perfect gas, thin-layer Navier Stokes code developed at NASA Langley Research Center and wind tunnel results obtained in Calspan's 96-inch shock tunnel on a research hypersonic aircraft will be presented in this paper. Results cover data obtained between Mach 11 and Mach 19. Comparisons shown in this paper include both pressure and heat transfers. Effects of grid refinement on the computational solution and nose bluntness effects on the comparisons will be discussed.

Richardson, Pamela F.↗

A Status Update for the FLASHFlux Working Group

This presentation provides an overview of the progress made by the FLASHFlux working group within the CERES Science Team. FLASHFlux is maintaining operations, continuing validation, migration production code for future production systems, and evaluating new inputs for their impacts on the current radiative flux data products. FLASHFlux data products continue to be served to the community and comprise the low latency solar and thermal infrared data products provided to the energy and agricultural communities at relatively low latency for global gridded data fluxes. (< 7days).

surface radiative flux↗

Sensitivity Studies of the Inter-subchannel Mixing in Subchannel Analysis

In the PWR reactor core, the power profile is nonuniform and the inter-subchannel mixing is of great importance for flatting the temperature distribution of the coolant and for reactor core safety analysis. Subchannel codes are widely used in the reactor core safety analysis to assess the thermal hydraulic behavior of fuel assemblies. One of basic assumptions in subchannel analysis is that axial flow predominates in the channel flow. Under this assumption, the lateral momentum equation in subchannel codes can be simplified without bringing in significant errors. The inter-subchannel mixing leading to the exchange of mass, energy and momentum are modeled by adding source terms to the hydrodynamic equations or by separate models, and most of source terms and models are empirical correlations. With the advancement of mixing vane grid design, the lateral mixing has becoming a critical components in the evaluation of the inter-subchannel mixing in flow field. The accuracy of the subchannel analysis is strongly dependent on the modeling of inter-subchannel interactions between adjacent subchannels. So the inter-subchannel mixing models should be well considered and developed in subchannel analysis to better reflect their influence on flow field and temperature field in rod bundle. Generally speaking, the inter-subchannel mixing in subchannel analysis contains turbulent mixing and crossflow mixing in single phase flow. When it comes to two phase flow, the void drift will also contribute to inter-subchannel mixing [2]. Both the mechanisms and the generation conditions of each type of inter-subchannel mixing are different from each other. Turbulent mixing is a result of random turbulent flow and pressure fluctuations. Crossflow is caused by a net transverse pressure difference between adjacent subchannels. Lateral pressure differences can result from different subchannel hydraulic diameters, mass flux, heat flux distributions and changes in flow areas caused, for example, by wire wraps and spacer grids, respectively. Two-phase void drift is due to the tendency of the vapor phase to redistribute itself to a preferred equilibrium void distribution. This paper focuses on the sensitivity study of the inter-subchannel mixing with mixing vane grids for single phase flow in subchannel analysis. Both the turbulent mixing and crossflow mixing of the 5 x 5 rod bundle with mixing vane grids are predicted, and the results are compared and analyzed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Application of Navier-Stokes code PAB3D with kappa-epsilon turbulence model to attached and separated flows

A three-dimensional Navier-Stokes solver was used to determine how accurately computations can predict local and average skin friction coefficients for attached and separated flows for simple experimental geometries. Algebraic and transport equation closures were used to model turbulence. To simulate anisotropic turbulence, the standard two-equation turbulence model was modified by adding nonlinear terms. The effects of both grid density and the turbulence model on the computed flow fields were also investigated and compared with available experimental data for subsonic and supersonic free-stream conditions.

Abdol-Hamid, Khaled S.↗

ROOT’s RNTuple I/O Subsystem: The Path to Production

The RNTuple I/O subsystem is ROOT’s future event data file format and access API. It is driven by the expected data volume increase at upcoming HEP experiments, e.g. at the HL-LHC, and recent opportunities in the storage hardware and software landscape such as NVMe drives and distributed object stores. RNTuple is a redesign of the TTree binary format and API and has shown to deliver substantially faster data throughput and better data compression both compared to TTree and to industry standard formats. In order to let HENP computing workflows benefit from RNTuple’s superior performance, however, the I/O stack needs to connect efficiently to the rest of the ecosystem, from grid storage to (distributed) analysis frameworks to (multithreaded) experiment frameworks for reconstruction and ntuple derivation. With the RNTuple binary format soon arriving at its first production release, we present RNTuple’s feature set, integration efforts, and its performance impact on the time-to-solution. We show the latest performance figures of RDataFrame analysis code of realistic complexity, comparing RNTuple and TTree as data sources. We discuss RNTuple’s approach to functionality critical to the HENP I/O (such as multithreaded writes, fast data merging, schema evolution) and we provide an outlook on the road to its use in production.

Blomer, Jakob↗

Adaptive Control Algorithm to Adjust Settings in Photovoltaic Inverters for Electric Grid Cybersecurity (DERAC) v0.1

Volt-VAR and Volt-Watt functionality in photovoltaic (PV) smart inverters provide mechanisms to ensure system voltage magnitudes and power factors remain within acceptable limits. However, these control functions can become unstable, introducing oscillations in system voltages when not appropriately configured or maliciously altered during a cyberattack. In the event that Volt-VAR and Volt-Watt control functions in a portion of PV smart inverters in a distribution grid are unstable, the proposed adaptation scheme utilizes the remaining and stably-behaving PV smart inverters and other Distributed Energy Resources to mitigate the effect of the instability in real-time. The adaptation mechanism is entirely decentralized, model-free, communication-free, and requires virtually no external configuration. This repository provides code to simulate the algorithm in experiments on the IEEE 37 node test feeder.

Arnold, Daniel↗

Comparison of nested geometry treatments within GPU-based Monte Carlo neutron transport simulations of fission reactors

Monte Carlo (MC) neutron transport provides detailed estimates of radiological quantities within fission reactors. This involves tracking individual neutrons through a computational geometry. CPU-based MC codes use multiple polymorphic tracker types with different tracking algorithms to exploit the repeated configurations of reactors, but virtual function calls have high overhead on the GPU. The Shift MC code was modified to support GPU-based tracking with three strategies: dynamic polymorphism with virtual functions, static polymorphism, and a single tracker type with tree-based acceleration. On the Frontier supercomputer these methods achieve 77.8%, 91.2%, and 83.4%, respectively, of the tracking rate obtained using a specialized tracker optimized for rectilinear-grid-based reactors. This indicates that all three methods are suitable for typical reactor problems in which tracking does not dominate runtime. The flexibility of the single tracker method is highlighted with a hexagonal-grid microreactor problem, performed without hexagonal-grid-specific tracking routines, providing a 2.19× speedup over CPU execution.

97 MATHEMATICS AND COMPUTING↗

Computational Bayesian Framework for Quantification and Reduction of Predictive Uncertainty in Subsurface Environmental Modeling

Subsurface environmental systems are open and complex, in which intricate hydrologic, microbiologic, and geochemical processes occur and interact at multiple scales. Understanding and predicting system responses to natural forces (e.g., climate changes) and human activities (e.g., contaminant remediation and CO 2 sequestration) is indispensable for managing water resources, cleaning subsurface contamination at many sites of the Department of Energy (DOE), and providing expert analysis to inform policy-making on long-term stewardship of nuclear waste disposal and CO 2 storage sites. Groundwater reactive transport modeling is necessary for understanding and predicting the complex subsurface environmental system. However, as complex systems are never completely predictable, model predictions of the subsurface system are inherently uncertain, and uncertainty is one of the greatest obstacles in simulating the subsurface environment. Quantifying predictive uncertainty of the complex system is critical to test model predictive power, support decision-making, and guide experimental design and data collection for uncertainty reduction. This project tackled two major obstacles to efficient and effective quantification and reduction of predictive uncertainty in simulating the complex subsurface environment. One obstacle is that existing methods of uncertainty quantification are too fragmented and incomplete for understanding and predicting the complex subsurface environment as a whole. The other obstacle is that existing methods of uncertainty quantification are computationally demanding and may not be applicable to groundwater reactive transport modeling that is always computationally expensive. The above two obstacles to uncertainty quantification directly affect the design of data collection schemes for uncertainty reduction. In this project, we developed a comprehensive Bayesian framework to remove the first obstacle. The second obstacle was tackled by using the sparse grid methods, which were originally developed and analyzed for numerical integration in the field of applied mathematics. We integrated the sparse grid methods into the Bayesian framework seamlessly, which led to a sparse-grid-based method of Bayesian uncertainty analysis. The developed computational Bayesian framework has been applied to a number of subsurface environmental problems through collaborating with scientists at the Pacific Northwest National Laboratory and Oak Ridge National Laboratory. The applications demonstrated that the computational Bayesian framework is general and compatible with any models and numerical codes of subsurface modeling. It is thus can be applied to gain insights for subsurface environmental modeling. This project helped the PI achieve his career goal to advance the state-of-the-art computational methods in uncertainty quantification for subsurface environmental modeling. This project supported two doctoral students, two master students, and one post-doc. The two doctoral students, after their graduation, worked as post-docs at the Pacific Northwest National Laboratory and the Oak Ridge National Laboratory. The project produced a total of 29 journal articles (four under review), one book chapter, and a number of conference proceedings and abstracts.

54 ENVIRONMENTAL SCIENCES↗