Search NASA⌕ Search

SEARCH · Search NASA

Results for “microstructure generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

The effect of side-chain branch position on the thermal properties of poly(3-alkylthiophenes)

Thermomechanical properties of conjugated polymers (CPs) are greatly influenced by both their microstructures and backbone dynamics. In the present work, to explore the effect of the side-chain branch position on the backbone's mobility and molecular packing structure, four poly (3-alkylthiophene-2,5-diyl) derivatives (P3ATs) with different side chains, either branched or linear, were synthesized by a quasi-living Kumada catalyst transfer polymerization (KCTP) method. The side-chain branch position greatly influences the glass transition temperature ( T g ) of the backbone of P3ATs as well as the melting temperature ( T m ), as measured by dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC) respectively. Placing the branching point closer to the conjugated backbone leads to increased backbone T g and T m . Also, according to grazing incidence wide-angle X-ray scattering (GIWAXS) results, branching closer to the backbone causes tighter packing in the side-chain direction. The tighter packing along the side-chain direction coresponds with the higher T m , which decreases the free volume of the polymer system and subsequently increases the T g at the same time. This work offers the first in-depth understanding of branch point influences on the thermal properties of poly(3-alkylthiophenes). It would provide guidance to the future development of side-chain engineering on next-generation CPs with desirable thermomechnical properties for stretchable and wearable electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Separate-Effects Tests for Studying Temperature-Gradient-Driven Cracking in UO 2 Pellets

We report a variety of normal operation and accident scenarios can generate thermal stresses large enough to cause cracking in light-water reactor (LWR) fuel pellets. Cracking of fuel pellets can lead to reduced heat removal, higher centerline temperatures, and localized stress in cladding, all of which impact fuel performance. It is important to experimentally characterize the thermal and mechanical behavior in the pellet before and after cracking to improve cracking models in fuel performance codes. However, in-reactor observation and measurement of cracking is very challenging due to the harsh environment and logistics. Recently, an experimental pellet cracking test stand was developed for separate effects testing of normal operations and accident temperature conditions, using thermal imaging to capture the pellet surface temperature for evaluation of thermal stresses and optical imaging to capture the evolution of cracking in real time. Experiments were performed using depleted uranium dioxide (UO 2 ) pellets, which are useful for collecting data valuable for development and validation of cracking models. A combination of induction and resistance heating was used to create an average temperature gradient of 236°C/cm and 193°C/cm before and after cracking respectively. Characterization of the pellets were done before as well as after cracking. The cracking patterns are somewhat different than those expected in a typical reactor because of the differences in thermal conditions and pellet microstructure. However, if the actual conditions of these experiments are reproduced in computational models, these out-of-pile tests on UO 2 pellets provide relevant data for modeling purposes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Phase-field model for diffusion-induced grain boundary migration: An application to battery electrodes

Diffusion-induced grain boundary migration is a phenomenon in which a grain boundary moves in response to the driving forces generated by diffusing solute species. For example, diffusing solute species change the atomic volume in the host material, either by filling a vacancy with a misfitting solute atom or by expanding host lattices through interstitial diffusion. These volume changes are inhomogeneous and are stored as elastic energy in the material that drives grain boundaries. In this paper, we introduce our previously developed Cahn-Hilliard–phase-field-crystal model (CH-PFC) as a computational tool to investigate diffusion-induced grain boundary migration in crystalline materials. This multiscale phase-field model couples the composition field of a diffusing species with the crystallographic texture of a host material. We apply the CH-PFC model to battery electrodes and investigate whether interstitial solute diffusion induces grain growth in FePO 4 /LiFePO 4 electrodes. To this end, we compute grain growth in 60 FePO 4 electrodes by conducting two parallel trials: In the first trial, we cycle the electrode and calculate diffusion-induced grain growth. In the second trial, we do not cycle the electrode and calculate curvature-driven grain growth. We find a statistically significant grain growth in the cycled electrodes and negligible grain growth in the noncycled electrodes. Altogether, we show that the CH-PFC model not only predicts electrode microstructures as a function of the Li composition, but also predicts the crystallographic features of an electrode during battery operation.

36 MATERIALS SCIENCE↗

Produced Fluid Induced Mineralogy and Elemental Alterations of Caney Shale, Southern Oklahoma

ABSTRACT This study involves batch reactor experiments and subsequent analyses of samples from Caney Shale in the Ardmore Basin of South-Central Oklahoma. Samples include mainly rock cores and cuttings recovered from two wells respectively drilled vertically through and horizontally across the Caney Shale. Mineralogical compositions are obtained by X-Ray Diffraction (XRD) measurements whilst microstructure and elemental distribution are acquired by Scanning Electron Microscopy/Energy Dispersive Spectroscopy (SEM/EDS) respectively. Batch experiments are then conducted using selected rock samples and produced fluid from the Caney Formation. Deionized water is also reacted with some samples to serve as standard. Experiments are conducted at 95°C and ambient pressure for 7 and 30 days to assess the geochemical rock-fluid interactions. Results show rock mineralogical compositions are predominantly quartz, feldspar, carbonates, and clay with minor pyrite. Post-experimental mineralogical changes observed in samples include increased amorphous entities especially within the clay portions of XRD plots and dissolution of feldspar and carbonate minerals and formation of new mineral phases, mostly clays and salts. These are corroborated by EDS elemental analyses which show decreased elemental compositions. The implications of reactions mentioned above include but not limited to, scale formation, clay fines migration and shale softening all of which pose significant permeability impairment on formation over time. INTRODUCTION Shale reservoirs account for a large share of unconventional reservoirs in the world (Lyu et al., 2015). However, ultra-low permeability and high clay compositions pose significant challenges when producing from these reservoirs (Dawuda and Srinivasan, 2022, 2023). Producing from these reservoirs therefore requires horizontal drilling and hydraulic fracturing technologies which have proven their efficacy in generating substantial permeability in reservoirs to ensure production (Fujian et al., 2019; Liu et al., 2018). Even after expensive horizontal drilling and hydraulic fracturing, geochemical reactions between engineered fluids and formation leads to fracture constriction and adversely impact petrophysical properties (permeability and porosity) of the reservoir. These technologies are therefore under constant development and improvement in various aspects to ensure fine tuning for specific reservoirs. Under present conditions, much of the hydrocarbon reserves in unconventional shale reservoirs are left unproduced due to rapid decline in permeability following resumption to production after hydraulic fracturing. It is therefore essential to understand the range of geochemical reactions that cause rapid depletion of permeability after hydraulic fracturing and apply these to each shale reservoir to ensure substantial recovery rates.

Awejori, G. A.↗

Nano-scale microstructure damage by neutron irradiations in a novel Boron-11 enriched TiB 2 ultra-high temperature ceramic

Ultra-high temperature transition-metal ceramics are potential candidates for fusion reactor structural and plasma-facing components. We reveal the irradiation damage microstructural phenomena in Boron-11 enriched titanium diboride (TiB 2 ) using mixed-spectrum neutron irradiations, combined with state-of-art characterization using transmission electron microscopy (TEM) and high resolution TEM. Irradiations were performed using High Flux Isotope Reactor at ~220 and 620 °C up to 2.4 x 10 25 n.m -2 (E > 0.1 MeV). The calculated dose including contribution from residual Boron-10 ( 10 B) transmutation recoils, was ~4.2 displacements per atom. TiB 2 is susceptible to irradiation damage in terms of dislocation loop formation, cavities and anisotropic swelling induced micro-cracking. At both 220 and 620 °C, TEM revealed dislocation loops on basal and prism planes, with nearly two orders of magnitude higher number density of prism-plane loops. HRTEM, electron diffraction and relrod imaging revealed additional defects on {10$ \overline{1}\ $0} planes, identified as faulted prism-plane dislocation loops. High defect cluster density on prism planes will induce a-lattice parameter swelling of TiB 2 , as reported in literature. This anisotropic lattice parameter swelling induced grain boundary micro-cracking, the extent of which decreased with increasing irradiation temperature. The dominance of irradiation defect clusters on prism planes is different than typical hexagonal ceramics where dislocation loops predominantly form on basal planes, causing c-lattice parameter swelling. Helium generation and temperature rise from the transmutation of residual 10 B resulted in matrix and grain boundary cavities for the irradiation at 620 °C. In conclusion, the study additionally signifies isotopic enrichment as a viable approach to produce transition-metal diborides for potential nuclear structural applications.

36 MATERIALS SCIENCE↗

New class of tritium breeders for fusion applications: Metal-reinforced composite breeders

Commercial fusion reactors operating on a D-T fuel cycle will require a steady supply of tritium to maintain the burning plasma required for continuous power generation. Since tritium has a short half-life, there is negligible natural abundance which necessitates fusion reactors to produce their own source of tritium. Tritium is most easily produced by surrounding a fusion reactor core with lithium (Li), which reacts under the intense neutron flux leaving the reactor core to form tritium and helium. Due to the hazards and technical challenges associated with surrounding a fusion reactor core with many tons of molten Li, other Li-bearing tritium breeder materials have been pursued. Unfortunately, most of the liquid breeders historically examined are exceedingly corrosive to reactor structural materials while many solid breeders in the form of ceramics are forced to make tradeoffs between Li content and mechanical integrity. In this work, to break the historic limit between Li-density and mechanical integrity of traditional solid breeders, a new class of solid tritium breeders is developed: metal-reinforced composite (MERC) breeders. Specifically, the high Li-density of lithium oxide (Li 2 O) is exploited through the addition of a metal reinforcing phase, producing a composite breeder material exhibiting high splitting tensile strength and quasi-ductility with a Li-density greater than other leading solid breeder candidates, including lithium orthosilicate (Li 4 SiO 4 ) and lithium metatitanate (Li 2 TiO 3 ). Mechanical testing, microstructural characterization, and neutronic simulation results are presented and discussed in light of fusion reactor design considerations.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Peculiar Magnetic and Magneto-Transport Properties in a Noncentrosymmetric Self-Intercalated van der Waals Ferromagnet Cr 5 Te 8

Trigonal Cr 5 Te 8 , a self-intercalated van der Waals ferromagnet with an out-of-plane magnetic anisotropy, has long been known to crystallize in a centrosymmetric structure. However, optical second harmonic generation experiments, together with comprehensive structural analysis, indicate that this compound rather adopts a noncentrosymmetric structure. Lorentz transmission electron microscopy reveals the presence of Néel-type skyrmions, consistent with its noncentrosymmetric structure. A large anomalous Hall conductivity of 102 Ω –1 cm –1 at low temperature stems from intrinsic origin, which is larger than any previously reported values in the bulk Cr–Te system. Notably, spontaneous topological Hall resistivity arising from the skyrmionic phase has been observed. Here, our findings not only elucidate the unique magnetic and magneto-transport properties of noncentrosymmetric trigonal Cr 5 Te 8 , but also open new avenues for investigating the effects of broken inversion symmetry on material properties and their potential applications.

crystal structure↗

Harnessing Relativistic Laser Plasmas to Generate Intense Ion Beams: A Plasma Science Frontier White Paper

Optical lasers with high intensity (> 10 19 W/cm 2 ), high power (> 100 TW) and high energy (> 50 J) are enabling research that is expanding the frontiers of physics. Some of the research opportunities and importance are described in several reports. Here we highlight a prominent one: harnessing relativistic laser plasmas to generate intense ion beams, much more intense than it is possible with conventional particle-acceleration technology. This topic is important in two ways. On the one hand, it represents exceedingly exciting science in plasma physics and extreme electrodynamics (i.e., “high-field” physics). On the other hand, it enables advanced technology for advancing other fields of science, for societal applications (e.g., fast ignition8) and for national defense. There are tremendous opportunities for continued progress in existing laser facilities in the US (with laser intensities up to ~ 10 21 W/cm 2 , such as the Trident Laser Facility) provided modest funding support and reorientation of these lasers as national user facilities. Longer term, there are also great scientific opportunities for the US by extending our capabilities to intensities of ~ 10 22 W/cm 2 and beyond with shaped laser pulses of intermediate duration (~ 100 fs), to complement high intensity, shorter pulse length lasers planned worldwide. Such a complementary US facility would in fact excel in the ion-beam generation mission proposed here. At ~ 10 22 W/cm 2 and beyond, besides meeting the requirements for important societal applications of intense ion beams, novel high-field physics becomes important and amenable to study. That includes e.g., radiation self-force for electrons, and direct coupling of the laser to the ions (not just to electrons and then indirectly to the ions). These new physics in turn may open new technological opportunities, such as x-ray and gamma-ray-beam sources and new ion-acceleration mechanisms. It is hard to overstate the impact of particle accelerators starting in the last century to the present. Accelerators have had profound impact in society, both as a key enabling experimental tool for the modern scientific edifice, as well as for societal applications such as cancer therapy. Conventional accelerator technology is bumping against two main limitations. One is particle energy (at a reasonable size and cost) rooted in the ~ 25 MeV/m gradient limit from electrical breakdown of conventional accelerator structures. The second is beam intensity, limited by current and space-charge stability of conventional (non-neutral) particle beams. The former issue is being addressed in ingenious ways by “dielectric accelerators” which use high-power, low-energy lasers to set up transient-high fields in dielectric microstructures. These devices promise to advance the state of the art in acceleration gradients, but of course cannot address the intensity limitations. Ultimately, the highest performance is going to require a plasma as the acceleration medium. Plasmas can support the highest accelerating potential gradients and the highest currents. Moreover, by delivering neutralized beams (ions co-moving with unbound electrons), the usual current and space-charge limits can be circumvented. Realizing the highest ion energies and intensities requires a high-power density source to drive the system. Intense, high-power, high-energy lasers represent an ideal drive source, provided the physics can be understood and controlled, i.e., a challenge proposed here. To meet that challenge, the science community can build on the significant progress over the last decade, experimentally, computationally and theoretically.

43 PARTICLE ACCELERATORS↗

ExaCA: A performance portable exascale cellular automata application for alloy solidification modeling

Modeling the as-solidified grain structures that form during alloy processing is a critical component in understanding process-property relationships, particularly for additive manufacturing (AM) where grain structure is very sensitive to processing conditions. While cellular automata (CA)-based models have proven able to predict aspects of microstructure for several alloys and AM process conditions, long run times and large resource sets required limit the utility and the problem size to which existing CA models can be applied. As part of the ExaAM project, an initiative within the Exascale Computing Project (ECP) to develop, test, and optimize an exascale-capable coupled and self-consistent model of AM parts, we developed ExaCA (https://github.com/LLNL/ExaCA) for the liquid–solid phase transformation in the wake of AM melt pools. The CA-based code is parallelized using MPI and the Kokkos programming model, the latter enabling simulation on both CPUs and GPUs within a single-source implementation. Here, we detail the steps taken to transform a baseline, MPI-based CA code into one that is performant on CPUs and GPUs. Performance testing of ExaCA on Summit (a pre-exascale machine at Oak Ridge National Laboratory) was used to quantify CPU–GPU speedup comparing with equal numbers of nodes. Testing showed comparable CPU performance to the MPI-only CA code and a 5-20x speedup when running AM-based test problems using GPUs. The improved performance of CA through GPU utilization and the performance portable nature of ExaCA will enable accurate part-scale modeling by harnessing the power of current and future generations of high performance computing resources. Future work will include improving the strong scaling of ExaCA on GPUs by reducing load imbalance associated with the locality of the problem, and continuing performance optimization across exascale hardware.

36 MATERIALS SCIENCE↗

Materials Challenges and Opportunities for Energy Generation, Conversion, Delivery, and Storage (Applied Energy Tri-Laboratory Consortium Workshop Report)

This report documents the outcomes of the Tri-Laboratory Materials Workshop that was held July 31 and August 1, 2019 to begin addressing the needs, opportunities, and challenges associated with the development, fabrication, and testing of the needed materials and components for integrated hybrid energy systems (i.e., incorporating nuclear, fossil, and renewables for electric and thermal applications). This was accomplished by assembling the research program leads and principal investigators at Idaho National Laboratory (INL), National Energy Technology Laboratory (NETL), and National Renewable Energy Laboratory (NREL), who support the research and development of new technology and system integration. The team then identified and prioritized key materials development needs. This effort was intended to enhance communications and synergy among the Tri-Lab partners. Advanced functional and structural materials are central to transformative energy technologies for energy generation, conversion, delivery, and storage. With that in mind, the workshop focused on identifying and assessing the foundational materials research needs at both the basic and applied levels. Materials challenges include the ability to withstand harsh environments, such as high temperatures and pressures, corrosion, oxidation, or irradiation while maintaining flexible mission profiles and long service lifespans. Advanced energy system material challenges and needs range from materials for the capture, upgrading/concentration, storage, and delivery of low-grade heat to materials for high temperature environments that involve liquid metals, molten salt, and very high temperature gas heat delivery and storage systems. Material improvements are needed for hybrid energy systems due to accelerated corrosion and stress-fatigue failure of materials and equipment, which results from increased frequency and amplitude of thermal, mechanical, and electrical cycling of systems components. Multifunctional materials are needed for high temperature solid-oxide fuel cells, advanced electrochemical reactors, and in-process separation. Relative to materials manufacturing, application of advanced additive and subtractive methods need to be understood to develop both thin-layer homogenous materials and materials of graded composition. Materials modeling and machine learning will be critical to accelerate the design and production of power electronics, and nuclear reactor materials and fuel, as well as to gain an understanding of beneficial materials phenomena or deleterious microstructure evolution. There is also a need for standardized models, computational structures, data reporting protocols and modeling tools across the three laboratories. This would allow consistent results, analysis, and data sharing. Combining computational capabilities between the three laboratories (e.g., hardware, software) would greatly increase computational capabilities and throughput. The workshop identified the need for laboratories to anticipate and address problems that will occur during scale-up. Laboratory work must connect with industry to ensure that research focuses on processes that are scalable and marketable. Industry input and perspective are essential to guide laboratory research to meet these requirements and deploy new technology in industrial demonstrations. Another aspect of scale-up is the integration of multiple systems since new challenges often arise at the subsystem interfaces. Establishing a scale-up manufacturing demonstration/pilot plant, potentially as an industrial user facility, would be beneficial to the laboratories and industry. That modular scale-up manufacturing demonstration/pilot plant would allow researchers to find and resolve interface problems that cannot be identified by focusing only on individual parts. Communication exchanges among the organizers, attendees, and workshop survey responses indicate that the workshop was successful in achieving its goal to identify key technology gaps and research needs. Strong positive feedback was received on the sharing of ideas, capabilities, talent, and passion to move forward on the materials-related action items.

36 MATERIALS SCIENCE↗

Tailoring the Electronic Structures and Spectral Properties of ZnO with Irradiation Defects Generated Under Intense Electronic Excitation: A Combined Experimental and DFT Approach

Here, the relationship between the composition of the internal defect states, spectral properties, and correlated electronic structures of wurtzite zinc oxide (ZnO) crystals under 645 MeV Xe 35+ irradiation is systematically investigated, employing experimental characterizations combined with first-principle calculations. Based on the ion irradiation-induced thermal expansion and relaxation processes, the high concentration of vacancy/interstitial defects produced from the transient disordered phase in molten track states trigger photoelectric changes, as follows: i) the generation of internal defect states effectively reduces the intrinsic bandgap (3.25 eV → 2.66 eV); ii) a large number of defective active sites inhibits the recombination between electron–hole pairs, causing dark conductance and photoconductance to increase with increasing damage levels until optimal fluence is achieved. Based on the density functional theory (DFT) with the GGA + U (GGA = generalized gradient approximation) method, the defective models associated with the different electronic structures, density of states, formation energy, and the nature of the chemical bonding are established. The narrowing of the bandgap observed experimentally and the enhancement of carrier concentration originating from the internal electron defect states are qualitatively verified, therefore laying the foundation for designing future nanoscale photoelectronic devices and microelectronics applications.

36 MATERIALS SCIENCE↗

Irradiated recycled plastic as a concrete additive for improved chemo-mechanical properties and lower carbon footprint

Concrete production contributes heavily to greenhouse gas emissions, thus a need exists for the development of durable and sustainable concrete with a lower carbon footprint. This can be achieved when cement is partially replaced with another material, such as waste plastic, though normally with a tradeoff in compressive strength. This study discusses progress toward a high/medium strength concrete with a dense, cementitious matrix that contains an irradiated plastic additive, recovering the compressive strength while displacing concrete with waste materials to reduce greenhouse gas generation. Compressive strength tests showed that the addition of high dose (100 kGy) irradiated plastic in multiple concretes resulted in increased compressive strength as compared to samples containing regular, nonirradiated plastic. This suggests that irradiating plastic at a high dose is a viable potential solution for regaining some of the strength that is lost when plastic is added to cement paste. X-ray Diffraction (XRD), Backscattered Electron Microscopy (BSE), and X-ray microtomography explain the mechanisms for strength retention when using irradiated plastic as a filler for cement paste. By partially replacing Portland cement with a recycled waste plastic, this design may have a potential to contribute to reduced carbon emissions when scaled to the level of mass concrete production.

42 ENGINEERING↗

Chemical Interaction of Palladium in Uranium Oxycarbide Nuclear Fuel Kernel

Chemical Interaction of Palladium in Uranium Oxycarbide Nuclear Fuel Kernel Jana Howard1,3, Guang Yang3, Haiyan Zhao1*, Patrick Warren4, Tiankai Yao3, Steven Cavazos4 Elizabeth Sooby Wood4*, Ching-heng Shiau2 1 University of Idaho, Environmental Science, Idaho Falls, Idaho, USA 2 Boise State University, Microscopy and Characterization Suite, Idaho Falls, Idaho, USA 3 Idaho National Laboratory, Idaho Falls, Idaho, USA 4 University of Texas San Antonio, Department of Physics and Astronomy, San Antonio, Texas, USA *Corresponding author: haiyanz@uidaho.edu; elizabeth.soobywood@utsa.edu Tri-structural Isotropic (TRISO) particle fuel is the preferred choice for the newest and next-generation high-temperature nuclear reactors due to its robust construction [1]. The fuel design effectively contains fission products inside the particle at extremely high temperatures [2]. However, the effect of transition metal fission products on fuel performance and structural integrity remains largely unknown, creating uncertainties in predicting fuel performance and potential failure mechanisms [2]. For example, palladium (Pd) has a strong tendency to form intermetallic phases with uranium (U). These new phases tend to be hard and brittle which could lead to fracture of fuel kernel during irradiation [3,4]. Pd is not normally produced in high concentrations in normal fission reactions however, driving the production of Pd into the locality of a Uranium Oxycarbide (UCO) nuclear fuel provides an opportunity to closely observe the diffusion and chemical interactions. This study focuses on detailed transmission electron microscopy characterization of the intermetallic phases formed by the interaction between a UCO kernel and a Pd bar after annealing at 1100 °C for 100 hours. Figure 1 provides an overview of the UCO kernel in contact with the Pd bar. The UCO-Pd sample surface was examined using a Focused Ion Beam (FIB) Quanta 3D FEG FEI in VCD detector mode at 10kV, 83pA to reveal surface features. Several key surface features in the interaction region were observed including: (1) a small area with dendritic microstructure, (2) color contrast near the UCO kernel and Pd boundary, and (3) darker and lighter regions throughout the sample surface. To analyze diffusion behavior, FIB was used to prepare lamellae from five different areas of the UCO-Pd sample, as well as one for the as-received sample. These lamellae were examined using a Scanning Transmission Electron Microscope ThermoFisher Spectra 300 (STEM-Spectra). Energy Dispersive Spectroscopy results confirmed the diffusion between the UCO fuel and Pd bar. Figure 2 shows the identified phases of UC, UO2, and Pd dispersed throughout the interaction region. It was also found that the Pd concentration decreases as the radial distance from the UCO-Pd interface increases. The Pd concentration was 36.93% atomic fraction 11µm from the interaction region then decreased to 7.51% atomic fraction at 257 µm away from the interaction region. Figure 3 shows how concentrations of U and Pd vary across the interaction zone, highlighting the extent of diffusion. This study confirms that Pd interacts with surrounding material to form U-Pd phase and diffusion zones. These diffusion zones vary in composition depending on its radial distance from the point of contact with the Pd bar. These findings contribute to a deeper understanding of the fission product behavior in high temperature nuclear fuels, aiding in the prediction and mitigation of potential fuel degradation mechanisms. A B C Fig. 1. SEM micrographs of UCO fuel kernel in contact with solid Pd bar and the lift out locations. Figure 1A shows UCO fuel kernel in contact with solid Pd bar. Figure 1B shows a higher magnification image of the UCO fuel-Pd interaction zone. Figure 1C shows lift out sites for the lamellae. A B C Fig 2. EDS maps reveal the distribution of U, O, and Pd in location 3. Figure 2A shows the distribution of uranium. Figure 2B shows the distribution of oxygen. Figure 2C shows the distribution of palladium. A B C Fig 3. Palladium and uranium concentration across interaction zone in location 2. Figure 3A shows EDS map of lift out number 2. Figure 3B shows a zoomed in EDS map taken from the interaction zone. Figure 3C shows a line graph of uranium and palladium concentrations across the interaction zone. References: 1. B.E. Wells, N.R. Phillips, K.J. Geelhood. Pacific West Laboratory. (2021). TRISO Fuel: Properties and Failure Modes. https://www.nrc.gov/docs/ML2117/ML21175A152.pdf (Accessed January 16, 2025). 2. American Nuclear Society. TRISO Fuel Development Progresses in INL, ORNL. https://www.gen-4.org/gif/upload/docs/application/pdf/2014-03/nov13nn_fuel_reprint.pdf (Accessed January 16, 2025) 3. Clark R.A., M.A. Con

36 - MATERIALS SCIENCE↗

Chemical Interaction of Palladium in Uranium Oxycarbide Nuclear Fuel Kernel

Chemical Interaction of Palladium in Uranium Oxycarbide Nuclear Fuel Kernel Jana Howard1,3, Guang Yang3, Haiyan Zhao1*, Patrick Warren4, Tiankai Yao3, Steven Cavazos4 Elizabeth Sooby Wood4*, Ching-heng Shiau2 1 University of Idaho, Environmental Science, Idaho Falls, Idaho, USA 2 Boise State University, Microscopy and Characterization Suite, Idaho Falls, Idaho, USA 3 Idaho National Laboratory, Idaho Falls, Idaho, USA 4 University of Texas San Antonio, Department of Physics and Astronomy, San Antonio, Texas, USA *Corresponding author: haiyanz@uidaho.edu; elizabeth.soobywood@utsa.edu Tri-structural Isotropic (TRISO) particle fuel is the preferred choice for the newest and next-generation high-temperature nuclear reactors due to its robust construction [1]. The fuel design effectively contains fission products inside the particle at extremely high temperatures [2]. However, the effect of transition metal fission products on fuel performance and structural integrity remains largely unknown, creating uncertainties in predicting fuel performance and potential failure mechanisms [2]. For example, palladium (Pd) has a strong tendency to form intermetallic phases with uranium (U). These new phases tend to be hard and brittle which could lead to fracture of fuel kernel during irradiation [3,4]. Pd is not normally produced in high concentrations in normal fission reactions however, driving the production of Pd into the locality of a Uranium Oxycarbide (UCO) nuclear fuel provides an opportunity to closely observe the diffusion and chemical interactions. This study focuses on detailed transmission electron microscopy characterization of the intermetallic phases formed by the interaction between a UCO kernel and a Pd bar after annealing at 1100 °C for 100 hours. Figure 1 provides an overview of the UCO kernel in contact with the Pd bar. The UCO-Pd sample surface was examined using a Focused Ion Beam (FIB) Quanta 3D FEG FEI in VCD detector mode at 10kV, 83pA to reveal surface features. Several key surface features in the interaction region were observed including: (1) a small area with dendritic microstructure, (2) color contrast near the UCO kernel and Pd boundary, and (3) darker and lighter regions throughout the sample surface. To analyze diffusion behavior, FIB was used to prepare lamellae from five different areas of the UCO-Pd sample, as well as one for the as-received sample. These lamellae were examined using a Scanning Transmission Electron Microscope ThermoFisher Spectra 300 (STEM-Spectra). Energy Dispersive Spectroscopy results confirmed the diffusion between the UCO fuel and Pd bar. Figure 2 shows the identified phases of UC, UO2, and Pd dispersed throughout the interaction region. It was also found that the Pd concentration decreases as the radial distance from the UCO-Pd interface increases. The Pd concentration was 36.93% atomic fraction 11µm from the interaction region then decreased to 7.51% atomic fraction at 257 µm away from the interaction region. Figure 3 shows how concentrations of U and Pd vary across the interaction zone, highlighting the extent of diffusion. This study confirms that Pd interacts with surrounding material to form U-Pd phase and diffusion zones. These diffusion zones vary in composition depending on its radial distance from the point of contact with the Pd bar. These findings contribute to a deeper understanding of the fission product behavior in high temperature nuclear fuels, aiding in the prediction and mitigation of potential fuel degradation mechanisms. A B C Fig. 1. SEM micrographs of UCO fuel kernel in contact with solid Pd bar and the lift out locations. Figure 1A shows UCO fuel kernel in contact with solid Pd bar. Figure 1B shows a higher magnification image of the UCO fuel-Pd interaction zone. Figure 1C shows lift out sites for the lamellae. A B C Fig 2. EDS maps reveal the distribution of U, O, and Pd in location 3. Figure 2A shows the distribution of uranium. Figure 2B shows the distribution of oxygen. Figure 2C shows the distribution of palladium. A B C Fig 3. Palladium and uranium concentration across interaction zone in location 2. Figure 3A shows EDS map of lift out number 2. Figure 3B shows a zoomed in EDS map taken from the interaction zone. Figure 3C shows a line graph of uranium and palladium concentrations across the interaction zone. References: 1. B.E. Wells, N.R. Phillips, K.J. Geelhood. Pacific West Laboratory. (2021). TRISO Fuel: Properties and Failure Modes. https://www.nrc.gov/docs/ML2117/ML21175A152.pdf (Accessed January 16, 2025). 2. American Nuclear Society. TRISO Fuel Development Progresses in INL, ORNL. https://www.gen-4.org/gif/upload/docs/application/pdf/2014-03/nov13nn_fuel_reprint.pdf (Accessed January 16, 2025) 3. Clark R.A., M.A. Con

36 - MATERIALS SCIENCE↗

Advanced detector signal acquisition and electron beam scanning for high resolution SEM imaging

We report the advancement of materials science at the mesoscale requires improvements in both sampling volumes/areas and spatial resolution in order to make statistically significant measurements of microstructures that influence higher-order material properties, such as fatigue and fracture. Therefore, SEM-based techniques have become desirable due to improvements in imaging resolution, large sample handling capability, and flexibility for in-situ instrumentation. By using fast sampling of SEM electron detector signals, intrinsic beam scanning defects have been identified that are related to the response time of the SEM electron beam deflectors and electron detectors. Mitigation of these beam scanning defects using detector sampling approaches and an adaptive model for settling time is shown to produce higher resolution SEM images, at faster image acquisition times, with a means to quantify the different response functions for various beam deflectors and detectors including those for electrons and ions.

47 OTHER INSTRUMENTATION↗

Generation of an amorphous graphite substrate by cumulative deuterium bombardment using molecular dynamics with full nonbonded interactions

A deuterated amorphous carbon target is generated from a fresh graphite layer via hyperthermal irradiation with deuterium ions using molecular dynamics (MD) simulations. We use interatomic potentials that include nonbonded (long-range) interactions for maximum accuracy and simulate cumulative bombardment up to doses of 5.80 x 10{sup 16} ions cm{sup -2} at 1000 K. The graphite target goes through several stages of erosion and swelling, leading to complete amorphization and significant density loss. The calculations show a transition from graphitelike hybridization to a mixture of diamondlike and linear hybridizations with dose. It is concluded that the current sample sizes obtained directly by cumulative irradiation affordable with MD are not sufficiently large to be used for sputtering calculations under steady-state conditions.

36 MATERIALS SCIENCE↗

Lifetime experimental study of graphite cathode for relativistic backward wave oscillator

Graphite cathodes are widely used due to their good emission properties, especially their long lifetime. Some previous papers have researched their lifetime under certain conditions and uncovered some important phenomena. This paper is dedicated to research the lifetime of the graphite cathode under higher power. In the lifetime test, the voltage and current amplitudes are about 970 kV and 9.7 kA, respectively. The repetition rate is 20 Hz. An X-band relativistic backward wave oscillator is used to generate high power microwave by utilizing the electron beam energy. The experimental results demonstrate that the emission property of the graphite cathode remains quite stable during 10{sup 5} pulses, despite some slight deteriorations regarding the beam and microwave parameters. The macroscopic morphology change of the cathode blade due to material evaporation is observed by a laser microscope. The mass loss of the graphite cathode is about 60 μg/C. Meanwhile, the observation by a scanning electron microscope uncovers that the original numerous flaky micro-structures are totally replaced by a relatively smooth surface at the mid region of the cathode blade and a large number of new micro-protrusions at the blade edges during the lifetime test.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Summary Report: Glass-Ceramic Waste Forms for Combined Fission Products

Glass-ceramic waste form development began in FY 2010 examining two combined waste stream options: (1) alkaline earth (CS) + lanthanide (Ln), and (2) + transition metal (TM) fission-product waste streams generated by the uranium extraction (UREX+) separations process. Glass-ceramics were successfully developed for both options however; Option 2 was selected over Option 1, at the conclusion of 2010, because Option 2 immobilized all three waste streams with only a minimal decrease in waste loading. During the first year, a series of three glass (Option 2) were fabricated that varied waste loading-WL (42, 45, and 50 mass%) at fixed molar ratios of CaO/MoO{sub 3} and B{sub 2}O{sub 3}/alkali both at 1.75. These glass-ceramics were slow cooled and characterized in terms of phase assemblage and preliminary irradiation stability. This fiscal year, further characterization was performed on the FY 2010 Option 2 glass-ceramics in terms of: static leach testing, phase analysis by transmission electron microscopy (TEM), and irradiation stability (electron and ion). Also, a new series of glass-ceramics were developed for Option 2 that varied the additives: Al{sub 2}O{sub 3} (0-6 mass%), molar ratio of CaO/MoO{sub 3} and B{sub 2}O{sub 3}/alkali (1.75 to 2.25) and waste loading (50, 55, and 60 mass%). Lastly, phase pure powellite and oxyapatite were synthesized for irradiation studies. Results of this fiscal year studies showed compositional flexibility, chemical stability, and radiation stability in the current glass-ceramic system. First, the phase assemblages and microstructure of all of the FY 2010 and 2011 glass-ceramics are very similar once subjected to the slow cool heat treatment. The phases identified in these glass-ceramics were oxyapatite, powellite, cerianite, and ln-borosilicate. This shows that variations in waste loading or additives can be accommodated without drastically changing the phase assemblage of the waste form, thus making the processing and performance characteristics of the waste form more predictable/flexible. However, in the future, the glass phase still needs to be accurately characterized to determine the effects of waste loading and additives on the glass structure. Initial investigations show a borosilicate glass phase rich in silica. Second, the normalized concentrations of elements leached from the waste form during static leach testing were all below 0.6 g/L after 28d at 90 C, by the Product Consistency Test (PCT), method B. These normalized concentrations are on par with durable waste glasses such as the Low-Activity Reference Material (LRM) glass. The release rates for the crystalline phases (oxyapatite and powellite) appear to be lower (more durable) than the glass phase based on the relatively low release rates of Mo, Ca, and Ln found in the crystalline phases compared to Na and B that are mainly observed in the glass phase. However, further static leach testing on individual crystalline phases is needed to confirm this statement. Third, Ion irradiation and In situ TEM observations suggest that these crystalline phases (such as oxyapatite, ln-borosilicate, and powellite) in silicate based glass ceramic waste forms exhibit stability to 1000 years at anticipated doses (2 x 10{sup 10}-2 x 10{sup 11} Gy). This is adequate for the short lived isotopes in the waste, which lead to a maximum cumulative dose of {approx}7 x 10{sup 9} Gy, reached after {approx}100 yrs, beyond which the dose contributions are negligible. The cumulate dose calculations are based on a glass-ceramic at WL = 50 mass%, where the fuel has a burn-up of 51GWd/MTIHM, immobilized after 5 yr decay from reactor discharge.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗