Search NASA⌕ Search

SEARCH · Search NASA

Results for “ordered statistics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Multisensor Arrays for Greater Reliability and Accuracy

Arrays of multiple, nominally identical sensors with sensor-output-processing electronic hardware and software are being developed in order to obtain accuracy, reliability, and lifetime greater than those of single sensors. The conceptual basis of this development lies in the statistical behavior of multiple sensors and a multisensor-array (MSA) algorithm that exploits that behavior. In addition, advances in microelectromechanical systems (MEMS) and integrated circuits are exploited. A typical sensor unit according to this concept includes multiple MEMS sensors and sensor-readout circuitry fabricated together on a single chip and packaged compactly with a microprocessor that performs several functions, including execution of the MSA algorithm. In the MSA algorithm, the readings from all the sensors in an array at a given instant of time are compared and the reliability of each sensor is quantified. This comparison of readings and quantification of reliabilities involves the calculation of the ratio between every sensor reading and every other sensor reading, plus calculation of the sum of all such ratios. Then one output reading for the given instant of time is computed as a weighted average of the readings of all the sensors. In this computation, the weight for each sensor is the aforementioned value used to quantify its reliability. In an optional variant of the MSA algorithm that can be implemented easily, a running sum of the reliability value for each sensor at previous time steps as well as at the present time step is used as the weight of the sensor in calculating the weighted average at the present time step. In this variant, the weight of a sensor that continually fails gradually decreases, so that eventually, its influence over the output reading becomes minimal: In effect, the sensor system "learns" which sensors to trust and which not to trust. The MSA algorithm incorporates a criterion for deciding whether there remain enough sensor readings that approximate each other sufficiently closely to constitute a majority for the purpose of quantifying reliability. This criterion is, simply, that if there do not exist at least three sensors having weights greater than a prescribed minimum acceptable value, then the array as a whole is deemed to have failed.

Immer, Christopher↗

Middle Man Concept for In-Orbit Collision Risks Mitigation, CAESAR and CARA Examples

This paper describes the conjunction analysis which has to be performed using data provided by JSpOC. This description not only demonstrates that Collision Avoidance is a 2- step process (close approach detection followed by risk evaluation for collision avoidance decision) but also leads to the conclusion that there is a need for a Middle Man role. After describing the Middle Man concept, this paper introduces two examples with their similarities and particularities: the American civil space effort delivered by the NASA CARA team (Conjunction Assessment Risk Analysis) and the French response CAESAR (Conjunction Assessment and Evaluation Service: Alerts and Recommendations). For both, statistics are presented and feedbacks discussed. All together, around 80 satellites are served by CARA and/or CAESAR. Both processes regularly evolve in order either to follow JSpOC upgrades or to improve analysis according to experience acquired during the past years.

conjunction↗

Spaceflight Associated Neuro-Ocular Syndrome: A Brief for Astronaut Candidates

INTRODUCTION: Spaceflight Associated Neuro-ocular Syndrome (SANS) was first described in 2011 as a clinical process involving degradation of visual acuity and structural changes of the eye when exposed to microgravity. This syndrome poses a risk to astronaut vision, safety, and mission performance, especially during extended-duration missions. The modern astronaut cohort is a diverse group of men and women including scientists, engineers, teachers, pilots, business professionals, and artists. Given their diverse backgrounds, it is imperative all crews are educated on SANS risks and potential countermeasures. This education must be comprehensive and easily understood, regardless of academic background or specific expertise. TOPIC: A PowerPoint was created to serve as a presentation and stand-alone educational aid for all astronaut candidates (ASCANS). This medium was chosen as it can be updated dynamically as new information emerges. The brief was split into sections to facilitate organized delivery of complex content in easy-to-understand components. Sections included descriptive statistics, signs and symptoms, outcomes, myths and ongoing research, countermeasures, ongoing surveillance, and unknown and future directions. More research is necessary in order to understand this syndrome, and without continued ASCAN participation in research, acquisition of data will not be possible. These efforts will become increasingly critical with deep space and exploration missions. APPLICATION: We recommend regular use of this brief for all ASCANS, and potentially veteran crewmembers, given the high risks and potentially poor outcomes associated with SANS. For ASCANS, recommendations include that this brief be provided at the start of their training, with a bi-annual refresher course for all astronauts. This ensures they are current on SANS information, given the dynamic nature of this syndrome. Additionally, this brief will be made available to all as a self-study aid, utilized as a refresher immediately prior to launch. It is anticipated that this brief will promote the health, safety, and wellbeing of professional and private crews alike, during and after long-duration spaceflight. RESOURCES: Brunstetter, T., Tarver, B., & Tsung, A. (2022, October). Spaceflight Associated Neuro-ocular Syndrome (Sans) and its Risk to Nasa Astronauts. JSC Aerospace Medicine Clerkship. Houston, TX; Lyndon B. Johnson Space Center. Laurie, S. S., Macias, B. R., Pardon, L. P., Brunstetter, T., Tarver, W. J., Gibson, C. R., Greenwald, S. H., Jasien, K. V., Mason, S., & Tsung, A. (2022). (rep.). Evidence Report: Risk of Spaceflight Associated Neuro-ocular Syndrome (SANS). Houston, TX: National Aeronautics and Space Administration. Mader, T. H., Gibson, C. R., Pass, A. F., Kramer, L. A., Lee, A. G., Fogarty, J., ... & Polk, J. D. (2011). Optic disc edema, globe flattening, choroidal folds, and hyperopic shifts observed in astronauts after long-duration space flight. Ophthalmology, 118(10), 2058-2069. LEARNING OBJECTIVES: • The audience will be able to describe current Spaceflight Associated Neuro-ocular Syndrome (SANS) findings, significance, and countermeasures. • The audience will understand the importance of astronauts’ familiarity with SANS prior to flying and the large risks associated with this syndrome. CME QUESTIONS (3 QUESTIONS, MULTIPLE CHOICE A-D): 1. What is the approximate prevalence rate of SANS in astronauts? A. 22% B. 50% C. 66% D. 80% Answer: C. 2. Which of the ocular findings are NOT associated with SANS? A. Optic disc edema B. Retinal detachment C. Globe flattening D. Chorioretinal folds Answer: B. 3. Which of the following diagnostic technologies are NOT available in-flight? A. Ocular ultrasound B. Retinal photography C. MRI Orbit D. Optical Coherence Tomography (OCT) Answer: C.

Sara Stroble Mason↗

Variance estimation for radiation analysis and multi-sensor fusion.

Variance estimates that are used in the analysis of radiation measurements must represent all of the measurement and computational uncertainties in order to obtain accurate parameter and uncertainty estimates. This report describes an approach for estimating components of the variance associated with both statistical and computational uncertainties. A multi-sensor fusion method is presented that renders parameter estimates for one-dimensional source models based on input from different types of sensors. Data obtained with multiple types of sensors improve the accuracy of the parameter estimates, and inconsistencies in measurements are also reflected in the uncertainties for the estimated parameter. Specific analysis examples are presented that incorporate a single gross neutron measurement with gamma-ray spectra that contain thousands of channels. The parameter estimation approach is tolerant of computational errors associated with detector response functions and source model approximations.

61 RADIATION PROTECTION AND DOSIMETRY↗

ROM-based Subset Selection Algorithm for Efficient Surrogate Modeling

This summary discusses a new methodology to support the construction of surrogate models for computationally expensive models with many input parameters and output responses. In realistic engineering calculations, such as thermal-hydraulics simulation, the cost of the simulation is typically expensive, especially when detailed models are employed to describe system behavior, thereby justifying the need for surrogate models. The cost of surrogate model construction is typically a function of the number of model parameters and the degree of model nonlinearity. For sufficiently complex models, the cost of constructing the surrogate model could be by itself overwhelmingly expensive, thereby diminishing its value. One key requirement of surrogate model construction is the ability to preselect the best parametric form to describe the model behavior over the expected range of parameter variations. This summary presents a new algorithm to help select the best approximation out of a template of functions using recent advances in reduced order modeling (ROM) techniques. The idea of selecting functions out of a template is typically referred to as subset selection in the statistical and applied mathematics community. Different from existing subset selection algorithms, we rely on ROM to help identify the most influential functions for the surrogate model. Previous work has shown that ROM can help reduce the effective dimensionality of the parameter space, which can help reduce the cost of surrogate model construction. In this summary, we adopt a different philosophy, where the fitting functions are treated as pseudo parameters and ROM is applied on the pseudo parameter space, with the result now being a ranked list of the pseudo parameters along with their contribution to the quality of the surrogate model fit. This approach allows the analyst to discard all terms that have negligible impact on the quantity of interest. A relap5 model is employed to demonstrate the application of the proposed methodology. (authors)

42 ENGINEERING↗

Role of State Policy in Renewable Energy Development

State policies can support renewable energy development by driving markets, providing certainty in the investment market, and incorporating the external benefits of the technologies into cost/benefit calculations. Using statistical analyses and policy design best practices, this paper quantifies the impact of state-level policies on renewable energy development in order to better understand the role of policy on development and inform policy makers on the policy mechanisms that provide maximum benefit. The results include the identification of connections between state policies and renewable energy development, as well as a discussion placing state policy efforts in context with other factors that influence the development of renewable energy (e.g. federal policy, resource availability, technology cost, public acceptance).

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Critical Temperature of the Three-Vertex Potts Model on a Kagome Lattice

The Potts model on a Kagome lattice is considered. The Monte Carlo method is used to obtain the temperature dependences of the thermodynamic parameters: heat capacity C, order parameter m, and susceptibility χ. The calculations were performed for systems with periodic boundary conditions. Systems with linear dimensions L × L = N, L = 20–90, were considered. Based on the fourth-order Binder cumulant method, the critical temperature (T{sub c}) was calculated for the three-vertex Potts model on a Kagome lattice. It is shown that the obtained value of T{sub c}, within the statistical error, is in good agreement with the results obtained by the transfer matrix and polynomial approximation methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modelling nearest neighbour distributions of biased tracers using hybrid effective field theory

ABSTRACT We investigate the application of hybrid effective field theory (HEFT) – which combines a Lagrangian bias expansion with subsequent particle dynamics from N-body simulations – to the modelling of k-nearest neighbour cumulative distribution functions (kNN-CDFs) of biased tracers of the cosmological matter field. The kNN-CDFs are sensitive to all higher order connected N-point functions in the data, but are computationally cheap to compute. We develop the formalism to predict the kNN-CDFs of discrete tracers of a continuous field from the statistics of the continuous field itself. Using this formalism, we demonstrate how kNN-CDF statistics of a set of biased tracers, such as haloes or galaxies, of the cosmological matter field can be modelled given a set of low-redshift HEFT component fields and bias parameter values. These are the same ingredients needed to predict the two-point clustering. For a specific sample of haloes, we show that both the two-point clustering and the kNN-CDFs can be well-fit on quasi-linear scales (≳ 20h−1Mpc) by the second-order HEFT formalism with the same values of the bias parameters, implying that joint modelling of the two is possible. Finally, using a Fisher matrix analysis, we show that including kNN-CDF measurements over the range of allowed scales in the HEFT framework can improve the constraints on σ8 by roughly a factor of 3, compared to the case where only two-point measurements are considered. Combining the statistical power of kNN measurements with the modelling power of HEFT, therefore, represents an exciting prospect for extracting greater information from small-scale cosmological clustering.

79 ASTRONOMY AND ASTROPHYSICS↗

Clustering instabilities in sedimenting fluid–solid systems: critical assessment of kinetic-theory-based predictions using direct numerical simulation data

In this paper the quantitative and qualitative ability of a kinetic-theory-based two-fluid model (KT-TFM) is assessed in a state of fully periodic sedimentation (fluidization), with a focus on statistically steady, unstable (clustered) states. The accuracy of KT-TFM predictions is evaluated via direct comparison to direct numerical simulation (DNS) data. The KT-TFM and DNS results span a rather wide parameter space: mean-flow Reynolds numbers on the order of 1 and 10, mean solid volume fractions from 0.1 to 0.4, solid-to-fluid density ratios from 10 to 1000 and elastic and moderately inelastic (restitution coefficient of 0.9) conditions. Data from both KT-TFM and DNS display a rich variety of statistically steady yet unstable structures (clusters). Instantaneous snapshots of KT-TFM and DNS demonstrate remarkable qualitative agreement. This qualitative agreement is quantified by calculating the critical density ratio at which the structure transitions from a chaotic, dynamic state to a regular, plug-flow state, with good overall comparisons. Further quantitative assessments of mean and fluctuating velocities show good agreement at high density ratios but weaker agreement at intermediate to low density ratios depending on the mean-flow Reynolds numbers and solid fractions. Deviations of the KT-TFM results from the DNS data were traced to a breakdown in one of the underlying assumptions of the kinetic theory derivation: high thermal Stokes number. Surprisingly, however, even though the low Knudsen number assumption, also associated with the kinetic theory derivation, is violated throughout most of the parameter space, it does not seem to affect the good quantitative accuracy of KT-TFM simulations.

42 ENGINEERING↗

A simple method for the determination of effective rain cell dimensions and orientation

A simple method is proposed for the determination of effective rain cell dimensions and orientation. Two rain cell models were considered: the circular cell and the elliptical cell. In both models it is assumed that the rain rate is constant throughout the cell, that all cell locations are equally likely, and that the cell dimensions depend upon the rain rate. It is then shown that the effective cell dimensions and orientation may be deduced from rain rate statistics accumulated at two or three closely spaced sites, depending upon the model chosen. The results of this study alone with previous estimates of rain cell dimension indicate that the rain rate measurement points should be spaced on the order of one-half kilometer apart. The proposed method is simple and relatively inexpensive; thus, this approach is readily suited to the study of the dependence of rain cell size and orientation upon climatic region. The resulting rain cell characteristics are of direct value in the prediction of millimeter wavelength attenuation statistics on both single-terminal and diversity earth-space propagation paths as well as point-to-point terrestrial links.

Hodge, D. B.↗

Astronomical and statistical algorithms used in the Space Telescope guide star selection system

The construction of the Space Telescope Guide Star Catalog from digitized Schmidt survey plates covering the entire sky is described. In order to provide sufficient pointing information, the Guide Star Selection System has to contain a catalog of 20 million guide star candidates in the range of 9.0 to 14.5 visual magnitudes. An image inventory process extracts the relevant object data; after photometric and astrometric calibration the data are screened to arrive at suitable guide star candidates. The selection process for a given target takes into account geometric and photometric parameters of the field, scheduling information, and acquisition probabilities for each guide star pair.

Jenkner, H.↗

Maximizing MWh: A statistical analysis of the performance of utility-scale photovoltaic projects in the United States

Despite significant cost declines utility-scale solar projects have to perform well over their lifetime in order to return profits in a low-PPA environment of under $50/MWh. Using multivariate regression analysis this paper examines the 2014 Net Capacity Factors for 128 utility-scale projects that came online before the end of 2013 and explores the impact (in decreasing order of importance) of global horizontal irradiance, tracking technology, inverter loading ratios and project vintage plus three other interactive variables on performance. The model complies with the assumptions of OLS regressions and explains 93% of the observed NCF variation.

Bolinger, M↗

Statistics of general functions of a Gaussian field-application to non-Gaussianity from preheating

We provide a general formula for calculating correlators of arbitrary function of a Gaussian field. This work extends the standard leading-order approximation based on the δN formalism to the case where truncation of the δN at some low order does not yield the correct answer. As an application of this formula, we investigate 2, 3 and 4-point functions of the primordial curvature perturbation generated in the massless preheating model by approximating the mapping between the curvature perturbation and the Gaussian field as a sum of the many spiky normal distribution functions as suggested by lattice calculations. We also discuss observational consequences of this case and show that trispectrum would be a key observable to search signature of preheating in the CMB map. It is found the forms of the curvature correlation functions for any δN, at the leading order in the correlator of the Gaussian field, coincide with the standard local type ones. Within this approximation, it is also found that the standard formula for the non-linearity parameters given by the product of the derivatives of the e-folding number still holds after we replace the bare e-folding number appearing in the original δN expansion with the one smoothed in the field space with a Gaussian window function.

79 ASTRONOMY AND ASTROPHYSICS↗

Genome Sizes and the Benford Distribution

Background: Data on the number of Open Reading Frames (ORFs) coded by genomes from the 3 domains of Life show the presence of some notable general features. These include essential differences between the Prokaryotes and Eukaryotes, with the number of ORFs growing linearly with total genome size for the former, but only logarithmically for the latter. Results: Simply by assuming that the (protein) coding and non-coding fractions of the genome must have different dynamics and that the non-coding fraction must be particularly versatile and therefore be controlled by a variety of (unspecified) probability distribution functions (pdf’s), we are able to predict that the number of ORFs for Eukaryotes follows a Benford distribution and must therefore have a specific logarithmic form. Using the data for the 1000+ genomes available to us in early 2010, we find that the Benford distribution provides excellent fits to the data over several orders of magnitude. Conclusions: In its linear regime the Benford distribution produces excellent fits to the Prokaryote data, while the full nonlinear form of the distribution similarly provides an excellent fit to the Eukaryote data. Furthermore, in their region of overlap the salient features are statistically congruent. This allows us to interpret the difference between Prokaryotes and Eukaryotes as the manifestation of the increased demand in the biological functions required for the larger Eukaryotes, to estimate some minimal genome sizes, and to predict a maximal Prokaryote genome size on the order of 8–12 megabase pairs. These results naturally allow a mathematical interpretation in terms of maximal entropy and, therefore, most efficient information transmission.

54 ENVIRONMENTAL SCIENCES↗

Design and control strategies for CELSS - Integrating mechanistic paradigms and biological complexities

Systems analysis and control theory consideration are given to simulations of both individual components and total systems, in order to develop a reliable control strategy for a Controlled Ecological Life Support System (CELSS) which includes complex biological components. Because of the numerous nonlinearities and tight coupling within the biological component, classical control theory may be inadequate and the statistical analysis of factorial experiments more useful. The range in control characteristics of particular species may simplify the overall task by providing an appropriate balance of stability and controllability to match species function in the overall design. The ultimate goal of this research is the coordination of biological and mechanical subsystems in order to achieve a self-supporting environment.

Moore, B., III↗

Bidisperse and polydisperse suspension rheology at large solid fraction

At the same solid volume fraction, bidisperse and polydisperse suspensions display lower viscosities, and weaker normal stress response, compared to monodisperse suspensions. The reduction of viscosity associated with size distribution can be explained by an increase of the maximum flowable, or jamming, solid fraction. In this work, concentrated or "dense" suspensions are simulated under strong shearing, where thermal motion and repulsive forces are negligible, but we allow for particle contact with a mild frictional interaction with interparticle friction coefficient of 0.2. Aspects of bidisperse suspension rheology are first revisited to establish that the approach reproduces established trends; the study of bidisperse suspensions at size ratios of large to small particle radii (2 to 4) shows that a minimum in the viscosity occurs for zeta slightly above 0.5, where zeta=phi_{large}/phi is the fraction of the total solid volume occupied by the large particles. The simple shear flows of polydisperse suspensions with truncated normal and log normal size distributions, and bidisperse suspensions which are statistically equivalent with these polydisperse cases up to third moment of the size distribution, are simulated and the rheologies are extracted. Prior work shows that such distributions with equivalent low-order moments have similar phi_{m}, and the rheological behaviors of normal, log normal and bidisperse cases are shown to be in close agreement for a wide range of standard deviation in particle size, with standard correlations which are functionally dependent on phi/phi_{m} providing excellent agreement with the rheology found in simulation. The close agreement of both viscosity and normal stress response between bi- and polydisperse suspensions demonstrates the controlling in influence of the maximum packing fraction in noncolloidal suspensions. Microstructural investigations and the stress distribution according to particle size are also presented.

Pednekar, Sidhant↗

Gravitational backreaction in cosmological spacetimes

We develop a new formalism for the treatment of gravitational backreaction in the cosmological setting. The approach is inspired by projective techniques in nonequilibrium statistical mechanics. We employ group averaging with respect to the action of the isotropy group of homogeneous and isotropic spacetimes (rather than spatial averaging), in order to define effective Friedmann-Robertson-Walker variables for a generic spacetime. Using the Hamiltonian formalism for gravitating perfect fluids, we obtain a set of evolution equations for the evolution of the effective variables; these equations incorporate the effects of backreaction by the inhomogeneities. Specializing to dust-filled spacetimes, we find regimes that lead to a closed set of backreaction equations, which we solve for small inhomogeneities. We then study the case of large inhomogeneities in relation to the proposal that backreaction can lead to accelerated expansion. In particular, we identify regions of the gravitational state space that correspond to effective cosmic acceleration. Necessary conditions are (i) a strong expansion of the congruences corresponding to comoving observers, and (ii) a large negative value of a dissipation variable that appears in the effective equations (i.e., an effective 'antidissipation')

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reduced‐Order Modeling for Linearized Representations of Microphysical Process Rates

Abstract Representing cloud microphysical processes in large scale atmospheric models is challenging because many processes depend on the details of the droplet size distribution (DSD, the spectrum of droplets with different sizes in a cloud). While full or partial statistical moments of droplet size distributions are the typical variables used in bulk models, prognostic moments are limited in their ability to represent microphysical processes across the range of conditions experienced in the atmosphere. Microphysical parameterizations employing prognostic moments are known to suffer from structural uncertainty in their representations of inherently higher dimensional cloud processes, which limit model fidelity and lead to forecasting errors. Here we investigate how data‐driven reduced‐order modeling can be used to learn predictors for microphysical process rates in bulk microphysics schemes in an unsupervised manner from higher dimensional bin distributions. Using simulations characteristic of marine stratiform clouds, we simultaneously learn lower dimensional representations of droplet size distributions and predict the evolution of the microphysical state of the system. Droplet collision‐coalescence, the main process for generating warm rain, is estimated to have an intrinsic dimension of three. This intrinsic dimension provides a lower limit on the number of degrees of freedom needed to accurately represent collision‐coalescence in models. We demonstrate how deep learning based reduced‐order modeling can be used to discover intrinsic coordinates describing the microphysical state of the system, where process rates such as collision‐coalescence are globally linearized. These implicitly learned representations of the DSD retain more information about the DSD than typical moment‐based representations.

54 ENVIRONMENTAL SCIENCES↗