Search NASA⌕ Search

SEARCH · Search NASA

Results for “process influence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Effect of misfit strain and surface roughness on the tunable dielectric behavior of Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} thin films

The effect of substrate temperature on the crystallographic texture and surface morphology of Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} deposited by rf magnetron sputtering on (111) oriented Pt (150 nm)/Ti (10 nm)/SiO{sub 2} (300 nm)/Si (100) substrates is reported. The onset of crystallinity is observed above 500 deg. C, beyond which all films are oriented along the (111) plane up to a temperature of 800 deg. C. Over this temperature range, the misfit strain and root mean square roughness (rms{sub roughness}) peak at 600 deg. C, decreasing beyond this peak value. The tunability of the dielectric constant at 100 kHz is highest (60% for a field strength of 300 kV/cm) at the lowest values of rms{sub roughness} and misfit strain and decreases as these values increase. It is also shown that the morphology of the Pt underlayers is strongly affected by the processing conditions. This in turn influences the tunable behavior of the BST films as much as the substrate temperature during growth and the consequent microstructural variations.

36 MATERIALS SCIENCE↗

Modeling metallic nanoparticle synthesis in a magnetron-based nanocluster source by gas condensation of a sputtered vapor

Copper nanoparticles (NPs) were synthesized by inert-gas condensation of a sputtered metallic vapor using a dedicated commercial reactor. By controlling the time of residence of NPs in the carrier gas phase via the tuning of the collision path length, Cu NPs were produced. They exhibit various and well controlled diameters (3-10 nm) and a relatively narrow size dispersion. On the basis of these experimental results, a detailed modeling of NP nucleation and growth based on the classical nucleation theory was developed. It takes into account the peculiar geometry and thermal profile of the NP reactor. The simulated curves, calculated by a MATLAB program developed for that purpose, exhibit a good qualitative agreement with experiment. Moreover, they highlight the role of process parameters and the strong influence of the reactor temperature profile on the NP size distribution. In the future, such calculations could be used for the optimization of the NP source design in order to increase its efficiency and reproducibility.

36 MATERIALS SCIENCE↗

Systematic calculation of E1 strength with fully self-consistent Skyrme-HF plus RPA

Systematic calculation of the electric dipole strength in even-even nuclei are performed employing a Hartree-Fock plus RPA approach. For an easy implementation of the fully self-consistent calculation, a finite amplitude method which we proposed recently is employed. We show an importance of low-angular momentum orbit for emergence of low-lying dipole resonances which have a substantial influence on the r-process in supernovae.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Geodesic Acoustic Mode in Toroidal Plasma

Geodesic acoustic modes (GAMs) are low frequency modes that were first predicted theoretically to occur in magnetically confined toroidal plasmas and found later in simulations of tokamak edge plasmas. They have been observed in various toroidal devices. Thus, investigating the source of excitation of these modes has been a very active area of research. Recently, we have addressed the issue of nonlinear excitation of these modes by three-wave resonant mode coupling to electron drift waves. We have extended this work to include finite beta effects. The finite beta effects have a strong stabilizing influence on the parametric excitation process. We have also investigated the role of plasma inhomogeneity in the edge plasma on the excitation of these modes. The two space scale analysis and eigenvalue studies shows that there is a short scale structure of the GAMs determined by the resonance condition and an envelope determined predominantly by the drift-wave and ambient inhomogeneity of the edge plasmas. The continuum GAM modes with coupling to the drift waves can create discrete ''global'' unstable eigenmodes localized in the edge''pedestal'' region of the plasma. Multiple resonantly driven unstable radial eigenmodes can coexist on the edge pedestal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of the growth mechanisms of GaN/(Al, Ga)N quantum dots: Correlation between structural and optical properties

The ammonia-based molecular beam epitaxy of GaN/(Al, Ga)N quantum dots is investigated using reflection high-energy electron diffraction, atomic force microscopy, transmission electron microscopy and photoluminescence. The main steps of the formation kinetics are identified and the influence of diffusion and evaporation processes on both the quantum dot and the wetting layer morphology is addressed. The correlation between the optical and structural properties of such structures finally allows for the analysis of matter exchanges between the quantum dots and the wetting layer during capping.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Angular and energy distribution of Sn ion debris ejected from a laser-produced plasma source, for laser power densities in the range suitable for extreme ultraviolet lithography

In this paper, experimental results are presented for the spatial and energy distributions of charge-discriminated Sn ions ejected from laser-produced plasmas. The plasmas were formed on solid, planar Sn targets, irradiated with a Nd:YAG laser. Ions were investigated using a calibrated electrostatic sector analyzer, scanning an energy-to-charge ratio range of 0.22 to 2.2 keV/e for emission angles between 20 and 80 degrees relative to target normal. Results were obtained for three laser power densities, in the region suitable for inducing significant extreme ultraviolet emission, of the order 1.5-8.1 x 10{sup 11} W/cm{sup 2}. The fully differentiated data were found to be well characterized by Gaussian fits, which allowed trends in the emission profiles to be readily quantified. Ions of set energy and charge were observed to possess a preferential angle of emission, the superposition of which yields a physical basis for the total angular emission observed previously and in this work. The experimental results obtained have been related to physical processes within the plasma that influence the energy and angle of ejection of ions from laser produced plasmas.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ion-acoustic waves in a nonstationary ultra-cold neutral plasma

We consider the excitation and dispersion of electrostatic ion-acoustic (IA) waves in a nonstationary ultra-cold neutral plasma (UCNP). This can be seen as an extension of time-refraction models of photons and plasmons to the case of low-frequency IA waves in the UCNP. It is shown that temporal changes in the medium lead to a frequency-shift of the IA wave, and to the emission of the IA waves propagating in a direction opposite to each other. We consider an arbitrary temporal variation of the background plasma density, and determine the transmission and reflection coefficients. We also consider the influence of a fast ionization process, assumed inhomogeneous in volume and show that it excites a well-defined spectrum of ion-acoustic waves, which agree very well with a recent experimental observation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Interfacial reaction induced phase separation in La{sub x}Hf{sub y}O films

Amorphous La{sub x}Hf{sub y}O films containing La at concentrations (x) of 50 and 20% were prepared by atomic layer deposition on ultrathin SiO{sub 2} films (1 nm). We examined the electronic structures and microstructures of the La{sub x}Hf{sub y}O films by x-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), energy dispersive x-ray spectroscopy (EDS), and x-ray diffraction (XRD). Phase separation into La{sub 2}O{sub 3} and HfO{sub 2} was observed in the La{sub x}Hf{sub y}O films subjected to annealing temperatures over 900 deg. C, although the mixture of La{sub 2}O{sub 3} and HfO{sub 2} is thermodynamically stable. The structural changes that occurred as the result of phase separation were dependent on the concentrations of La and Hf in the films. During the annealing treatment, silicate was produced due to interfacial reactions and the interfacial reactions were found to be dependent on the La{sub 2}O{sub 3} content in the La{sub x}Hf{sub y}O films, which has a significant influence on the phase separation process and resulting film structure.

36 MATERIALS SCIENCE↗

Influence of plasma-based in-situ surface cleaning procedures on HfO{sub 2}/In{sub 0.53}Ga{sub 0.47}As gate stack properties

We report on the influence of variations in the process parameters of an in-situ surface cleaning procedure, consisting of alternating cycles of nitrogen plasma and trimethylaluminum dosing, on the interface trap density of highly scaled HfO{sub 2} gate dielectrics deposited on n-In{sub 0.53}Ga{sub 0.47}As by atomic layer deposition. We discuss the interface chemistry of stacks resulting from the pre-deposition exposure to nitrogen plasma/trimethylaluminum cycles. Measurements of interface trap densities, interface chemistry, and surface morphology show that variations in the cleaning process have a large effect on nucleation and surface coverage, which in turn are crucial for achieving low interface state densities.

36 MATERIALS SCIENCE↗

Intersublevel dephasing in InAs/GaAs quantum dots below the Reststrahlen band

Using transient four-wave mixing in the terahertz range, we have measured the s-p inter-sublevel dephasing time in self-assembled InAs/GaAs quantum dots for transition energies below the Reststrahlen band. Dephasing times of up to 600 ps at a photon energy of 18 meV have been determined. By comparing pump-probe and four-wave mixing measurements, we show that there is no significant influence of any pure dephasing process at low temperature. The linear temperature dependence is consistent with acoustic phonon scattering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of heterogeneous sulfur atoms on the negative differential resistance effect in polythiophene

In this work, we have carried out theoretical investigations aiming to clarify the effects of sulfur heteroatoms on the transport characteristics in polythiophene. Sulfur atoms in polythiophene are demonstrated to influence the structure and transport process by two aspects: the electron hopping between carbon atoms on both sides of the sulfur atom as well as the effective confinement of π electrons from the sulfur atom. Based on the static Su-Schrieffer-Heeger model and the nonequilibrium Green's function formalism, we simulate the electron transportation in a metal/polythiophene/metal structure. The simulation results show that the electron hopping via sulfur atoms is responsible for the observed negative differential resistance (NDR) behavior in the I-V curves. The NDR disappears if the electron transport channels from carbon to carbon via sulfur atoms are forbidden. The weaker the effective confinement of π electrons and the electron hopping between carbon atoms on both sides of the sulfur atom are, the higher is the peak-to-valley ratio of the NDR and the wider the voltage range where the current remains at low levels. These results can help in understanding the NDR effect in polythiophene.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Silicate species of water glass and insights for alkali-activated green cement

Despite that sodium silicate solutions of high pH are commonly used in industrial applications, most investigations are focused on low to medium values of pH. Therefore we have investigated such solutions in a broad modulus range and up to high pH values (∼14) by use of infrared (IR) spectroscopy and silicon nuclear magnetic resonance ({sup 29}Si-NMR). The results show that the modulus dependent pH value leads to more or less charged species, which affects the configurations of the silicate units. This in turn, influences the alkali-activation process of low CO{sub 2} footprint cements, i.e. materials based on industrial waste or by-products.

36 MATERIALS SCIENCE↗

Damage buildup in Ar-ion-irradiated 3 C -SiC at elevated temperatures

Above room temperature, the accumulation of radiation damage in 3 C -SiC is strongly influenced by dynamic defect interaction processes and remains poorly understood. Here, we use a combination of ion channeling and transmission electron microscopy to study lattice disorder in 3 C -SiC irradiated with 500 keV Ar ions in the temperature range of 25–250 °C. Results reveal sigmoidal damage buildup for all the temperatures studied. For 150 °C and below, the damage level monotonically increases with ion dose up to amorphization. Starting at 200 °C, the shape of damage–depth profiles becomes anomalous, with the damage peak narrowing and moving to larger depths and an additional shoulder forming close to the ion end of range. As a result, damage buildup curves for 200 and 250 °C exhibit an anomalous two-step shape, with a damage saturation stage followed by rapid amorphization above a critical ion dose, suggesting a nucleation-limited amorphization behavior. Despite their complexity, all damage buildup curves are well described by a phenomenological model based on an assumption of a linear dependence of the effective amorphization cross section on ion dose. Here, in contrast to the results of previous studies, 3 C -SiC can be amorphized by bombardment with 500 keV Ar ions even at 250 °C with a relatively large dose rate of ~2×10 13 cm -2 s -1 , revealing a dominant role of defect interaction dynamics at elevated temperatures.

36 MATERIALS SCIENCE↗

Effect of power and type of substrate on calcium-phosphate coating morphology and microhardness

As known, the influence of the different sputtering process parameters and type of substrate on structure of the deposited coating is important to identify, because these parameters are significantly affected on structure of coating. The studies of the morphology and microhardness of calcium-phosphate (CaP) coatings formed and obtained on the surface of titanium, zirconium, titanium and niobium alloy for different values of the power of radio frequency discharge are presented. The increase in the radio frequency (rf) magnetron discharge leads to the formation of a larger grain structure of the coating. The critical depths of indentation for coatings determining the value of their microhardness have been estimated. Mechanical properties of the composite material on the basis of the bioinert substrate metal and CaP coatings are superior to the properties of the separate components that make up this composite material.

36 MATERIALS SCIENCE↗

Effect of xenon on the structural phase state of the surface layer of cemented carbide under pulsed electron-beam irradiation

A comparative analysis of the surface-layer microstructure of a tungsten-based cemented carbide modified with pulsed high-energy electron beams generated by gas-discharge plasmas and of the tool life of metal-cutting plates prepared from this alloy is performed. The choice of a plasma-forming gas providing for the emission of electrons out of the plasma-filled cathode is shown to have a profound influence both on the formation process of nano-sized structural-phase states in the surface layer of the cemented carbide and on the tool life of the metal-cutting plates prepared from this alloy.

36 MATERIALS SCIENCE↗

Kinetics of optically excited charge carriers at the GaN surface: Influence of catalytic Pt nanostructures

In this work, we use GaN with different deposited Pt nanostructures as a controllable model system to investigate the kinetics of photo-generated charge carriers in hybrid photocatalysts. We combine conductance and contact potential difference measurements to investigate the influence of Pt on the processes involved in the capture and decay of photo-generated charge carriers at and close to the GaN surface. We found that in the presence of Pt nanostructures the photo-excitation processes are similar to those found in Pt free GaN. However, in GaN with Pt nanostructures, photo-generated holes are preferentially trapped in surface states of the GaN covered with Pt and/or in electronic states of the Pt and lead to an accumulation of positive charge there, whereas negative charge is accumulated in localized states in a shallow defect band of the GaN covered with Pt. This preferential accumulation of photo-generated electrons close to the surface is responsible for a dramatic acceleration of the turn-off charge transfer kinetics and a stronger dependence of the surface photovoltage on light intensity when compared to a Pt free GaN surface. Our study shows that in hybrid photocatalysts, the metal nanostructures induce a spatially inhomogeneous surface band bending of the semiconductor that promotes a lateral drift of photogenerated charges towards the catalytic nanostructures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In silico evidence for sequence-dependent nucleosome sliding

Significance The dynamic compaction of DNA into chromatin is essential for gene expression. Errors during compaction are associated with numerous diseases. Several molecular factors are known to affect chromatin dynamics, but their relative importance and the interplay between them are poorly understood. A detailed molecular model is used here to examine chromatin dynamics at the level of its most fundamental building block, namely the nucleosome. Nucleosome dynamics are demonstrated to be encoded in the DNA sequence itself, and key fundamental factors are uncovered that can significantly alter these dynamics at the molecular level. The results serve to complete a hitherto unavailable description of nucleosome dynamics by introducing previously unappreciated molecular processes, with the potential to influence macroscopic chromatin structure and genetics.

59 BASIC BIOLOGICAL SCIENCES↗

Climate forcing controls on carbon terrestrial fluxes during shale weathering

Climate influences near-surface biogeochemical processes and thereby determines the partitioning of carbon dioxide (CO 2 ) in shale, and yet the controls on carbon (C) weathering fluxes remain poorly constrained. Using a dataset that characterizes biogeochemical responses to climate forcing in shale regolith, we implement a numerical model that describes the effects of water infiltration events, gas exchange, and temperature fluctuations on soil respiration and mineral weathering at a seasonal timescale. Our modeling approach allows us to quantitatively disentangle the controls of transient climate forcing and biogeochemical mechanisms on C partitioning. We find that ~3% of soil CO 2 (1.02 mol C/m 2 /y) is exported to the subsurface during large infiltration events. Here, net atmospheric CO 2 drawdown primarily occurs during spring snowmelt, governs the aqueous C exports (61%), and exceeds the CO 2 flux generated by pyrite and petrogenic organic matter oxidation (~0.2 mol C/m 2 /y). We show that shale CO 2 consumption results from the temporal coupling between soil microbial respiration and carbonate weathering. This coupling is driven by the impacts of hydrologic fluctuations on fresh organic matter availability and CO 2 transport to the weathering front. Diffusion-limited transport of gases under transient hydrological conditions exerts an important control on CO 2 (g) egress patterns and thus must be considered when inferring soil CO 2 drawdown from the gas phase composition. Our findings emphasize the importance of seasonal climate forcing in shaping the net contribution of shale weathering to terrestrial C fluxes and suggest that warmer conditions could reduce the potential for shale weathering to act as a CO 2 sink.

58 GEOSCIENCES↗