Search NASA⌕ Search

SEARCH · Search NASA

Results for “prototypes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Catalyst-Assisted Manufacture of Olefins from Natural Gas liquids: Prototype Development and Full-Scale Testing

The steam cracking of ethane to ethylene consumes the greatest amount energy of any process currently practiced by the US chemical industry. U.S. ethylene production consumed an estimated 450 trillion BTU of energy to produce nearly 53 billion pounds of ethylene in 2010. A significant portion of this energy consumption is to overcome the insulating effect of coke (carbonaceous deposits) on the internal surfaces of cracker furnace tubes. This buildup of coke is the result of both metal-catalyzed coke formation on the tube walls (“filamentous coke”), and deposition of gas-phase coke on the tube walls (“amorphous coke”). Coke buildup requires a continuous increase in energy input (firing of external coil tube wall) to achieve the same conversion of ethane feedstock to ethylene product, until the tubes must be taken out of service and the coke removed by steam treatment (“decoking”). This step interrupts production and increases the cost of ethylene. Coke buildup also shortens the coil life by increasing the rate of “creep” (sagging) that occurs due to higher temperature operation and migration of the deposited carbon into the coil metal.

03 NATURAL GAS↗

Commercial Absorption Heat Pump Water Heater: Beta Prototype Evaluation

The Beta version of the Commercial Absorption Heat Pump (CAHP) water heater was evaluated in the environmental chambers at Oak Ridge National Laboratory. Ambient air conditions ranged from 17 to 75 oF and inlet water temperatures ranged from 100 to 120oF in order to capture trends in performance. The unit was operated under full fire (100%) and partial fire (55%). The unit was found to perform at 90% of the project goal at the design conditions of 47oF ambient and 100oF water temperatures. The trends across the full range of environmental conditions were as expected for ambient air temperatures above 32oF. Below this temperature and for the full fire condition, frost accumulated on the evaporator coil. In future work a defrost strategy will be enabled, the unit will be thoroughly cleaned of an oil contamination and the rectifier will be reconfigured in order to meet the design goals and have a field test unit ready in early 2017.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

TM 2: Assembly prototype girder

This Technical Note presents details of the successful achievement of Technical Milestone 2 in the NYSERDA contract with Brookhaven National Laboratory and Cornell University. The project { to design, build and commission the Cornell-BNL Electron Test Accelerator (CBETA) { will achieve final success when all 12 Technical Milestones are complete.

43 PARTICLE ACCELERATORS↗

Production Facility Prototype Blower 1000 Hour Test Results II

Long duration tests of the Aerzen GM 12.4 roots style blower in a closed loop configuration provides valuable data and lessons learned for long-term operation at the Mo-99 production facility. The blower was operated in a closed loop configuration with the flow conditions anticipated in plant operation with a Mo-100 target inline. The additional thermal energy generated from beam heating of the Mo-100 disks were not included in these tests. Five 1000 hour tests have been completed since the first test was performed in January of 2016. All five 1000 hour tests have proven successful in exposing preventable issues related to oil and helium leaks. All blower tests to this date have resulted in stable blower performance and consistency. A summary of the results for each test, including a review of the first and second tests, are included in this report.

42 ENGINEERING↗

Testing of 90° beam-line prototype at 55 MeV electron linac

Argonne National Laboratory, in cooperation with NorthStar Medical Technologies and Los Alamos National Laboratory, is developing a technology for the production of Mo-99 via photonuclear reaction on a Mo-100 target. The new facility will utilize electron accelerators with high beam power.

07 ISOTOPE AND RADIATION SOURCES↗

Final CRADA Report for Enhanced and Miniaturized Wireless Valve Position Indicator Prototype

Most operating nuclear power plants (NPPs) in the United States have received approval to extend their operating licenses to 60 years. Now the nuclear industry is preparing to extend operating licenses to 80 years. While NPPs are preparing for extensions (60 years and beyond), the nuclear industry is facing a unique economic sustainability challenge in the current energy market. According to the Nuclear Energy Institute (NEI), generating costs of U.S. reactors have risen by 28% over the last 12 years, which is impacting the competitiveness of nuclear power in a market being increasingly penetrated by natural gas and renewable energy. This is partly because of the fact that the present nuclear work practice is dependent on a large technical staff which results in high operation and maintenance (O&M) costs, accounting for approximately 66% of the total operating cost. To address these concerns and abide by the NEI’s “Delivering the Nuclear Promise Initiative,” the U.S. utilities are embracing digitalization of their work practice to lower the O&M costs and increase productivity and efficiency while maintaining a safe and reliable operation. To address these above-mentioned concerns, Idaho National Laboratory (INL) researchers (proposal team) have developed a wireless valve position indication (VPI) sensor system that can be retrofitted on three main manual valve types (extendible to other manual valve types) to replace manual valve position verification with digital verification and enable online monitoring of manual valves. The developed technology 1) is evaluated for electromagnetic interference, 2) has a low power consuming and miniaturized electronic board, 3) is mounted on adjustable and reconfigurable sensor mounting unit that can fit on an actual flow-loop (at Idaho State University-ISU) to enable online monitoring of manual valve types without any valve body modification, and 4) ensures robust, secure, and reliable real-time communication of manual valve position.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The International Science and Technology Center: Product of the Past or Prototype for the Future?

The International Science and Technology Center (ISTC) – originally formed in the early 1990s to address the potential issue of “brain drain” from underemployed and underpaid nuclear weapons scientists, engineers, and technicians in the former Soviet Union – still exists to this day. Through more than two decades of changing circumstances and worldviews, the ISTC has had to reorganize, move countries, streamline its internal processes, and broaden its scope of work in an attempt to remain a relevant and useful tool for international science cooperation in the 21st century. Critics see it as a product of the past in a modern world that no longer requires the redirection of former Soviet scientists, while proponents argue that the established networks and trust from the international community that the ISTC has developed throughout its history make it a critical and useful tool for current and future science cooperation and threat reduction. Through historical and budget analysis, this paper hopes to answer the following questions: (1) how has the ISTC evolved throughout its history to become what it considers to be a useful tool for the future of science cooperation and threat reduction, and (2) if the ISTC still serves a purpose, what is that purpose, and how can they continue to adapt and evolve to better serve that purpose?

99 GENERAL AND MISCELLANEOUS↗

Financial Impacts of a Combined Energy Efficiency and Net-Metered PV Portfolio on a Prototypical Northeast Utility

Reductions in electricity consumption from customer-funded energy efficiency (EE) programs and distributed photovoltaic (PV) are expected to dramatically increase over the next ten years. While EE programs and net-metered PV provide numerous utility, customer, and societal benefits, including utility cost reductions, lower customer bills, and achievement of clean energy public policy goals, they may contribute to stagnant or declining retail sales for electric utilities. Investor-owned utilities are concerned about stagnant or declining sales as they undermine existing regulatory and ratemaking approaches to cover fixed costs and may negatively impact utility profitability. Current retail rate designs allocate a large fraction of fixed costs to volumetric energy charges creating challenges for the utility’s recovery of its fixed costs due to reductions in retail sales between rate cases.

14 SOLAR ENERGY↗

Extended Elemental Iodine Adsorption by AgZ under Prototypical Vessel Off-Gas Conditions

U.S. regulations will require the removal of 129 I from the off-gas streams of any used nuclear fuel (UNF) reprocessing plant prior to discharge of the off-gas to the environment. Multiple off-gas streams within a UNF reprocessing plant combine prior to environmental release, and each of these streams contains some amount of iodine. For an aqueous UNF reprocessing plant, these streams include the dissolver off-gas (DOG), the cell off-gas (COG), the vessel off-gas (VOG), the waste off-gas (WOG), and the shear off-gas (SOG). To achieve regulatory compliance, treatment of multiple off-gas streams within the plant must be performed. Of these remaining streams, the VOG is expected to be one of the major contributors to the balance of the residual iodine releases. The VOG will most likely contain iodine at parts-per-billion (ppb*) concentrations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Updated OpenStudio (OS) Small Office Prototype Model

The U.S. Department of Energy (DOE) supports the development of commercial building energy codes and standards by participating in industry review, update processes, and providing technical analyses to support both published model codes and potential changes. DOE publishes its findings to ensure transparency in its support, and to make its analysis available for both public review and use. In conjunction with this effort, DOE’s flagship building energy model (BEM) tools consist of the open-source EnergyPlus simulation engine and OpenStudio. These tools allow a user to modify a building, estimate energy use, and new releases are typically downloaded by over 20,000 users.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Production Facility Prototype Blower 1000 Hour Test Results III

Long duration operations tests of the Aerzen GM 12.4 roots style blower in a closed loop configuration provides valuable data and lessons learned for long-term operation at the Mo-99 production facility. The blower was operated in a closed loop configuration with the flow conditions anticipated in plant operation with a Mo-100 target inline. The additional thermal energy generated from beam heating of the Mo-100 disks was not included in these tests. Eight long duration 500 and 1000 hour tests have been completed since the first test was performed in January of 2016. All eight long duration tests have proven successful in exposing preventable issues related to oil and helium leaks.

47 OTHER INSTRUMENTATION↗

ATDM/ECP Milestone Memo WBS 2.3.4.04 / SNL ATDM Data and Visualization Projects STDV04-21 - [MS1/YR2] Q3: Prototype Catalyst/ParaView in-situ viz for unsteady RV flow on ATS-1

ParaView Catalyst is an API for accessing the scalable visualization infrastructure of ParaView in an in-situ context. In-situ visualization allows simulation codes to access data post-processing operations while the simulation is running. In-situ techniques can reduce data post-processing time, allow computational steering, and increase the resolution and frequency of data output. For a simulation code to use ParaView Catalyst, adapter code needs to be created that interfaces the simulations data structures to ParaView/VTK data structures. Under ATDM, Catalyst is to be integrated with SPARC, a code used for simulation of unsteady reentry vehicle flow.

97 MATHEMATICS AND COMPUTING↗

Prototype Ceramic High Efficiency Particulate Air Filter Testing and Filter Media Development for Nuclear Facility Ventilation

This report summarizes recent and past related Ceramic HEPA Filter activity for this NNSA NSR&D project and on-going plans for FY18 and FY19 work as presently planned. Prior work has evaluated concepts for a ceramic HEPA filter including ceramic support materials, filter media including electrospun filter media, and metal housing designs to accommodate the conservative temperature performance target of up to 500°C. This has been supported by modelling efforts discussed with nuclear facility system engineers and their management. The temperature and time-at-temperature are based on conservative, bounding temperatures from fire analysis presented as a draft EFCOG best practice paper for nuclear facility safety analysis. The overall goal is to improve safety of DOE nuclear facilities during fire scenarios by developing improved filtration technology including increasing performance while reducing pressure drop. Ceramic filtration technology can provide robust, passive mitigation against radiological releases. The goal of the ceramic HEPA filter is to provide a robust HEPA filter that provides increased temperature performance in an equivalent form factor (size and shape) that is similar to existing conventional HEPA filters used in facilities. Once qualified for use in facilities, the benefit of a ceramic HEPA filters could simplify and reduce safety and support system costs, as well as considerably lower life-cycle costs. Installation, monitoring, and maintenance of active fire suppression systems, as well as other related systems, are a considerable on-going cost to nuclear facilities. Reducing the level of dependence on Safety Class and Safety Significant fire alarm and fire suppression systems could allow significant cost savings. At present we are continuing research and development efforts towards the goal of a ceramic filter design, including improved ceramic filter media, that could reduce total operation cost for facilities utilizing HEPA filters.

42 ENGINEERING↗

Prototype Testing of Encapsulated Phase Change Material Thermal Energy Storage (EPCM-TES) for Concentrated Solar Power

In the present study, experimental investigations were conducted on encapsulated phase-change material (EPCM) capsules from Terrafore Technologies. Several aspects of the EPCM capsules were evaluated, including shell fracture stress under compression and melting/solidification performance. The stress testing was conducted with the Instron universal test system, and the melting/solidification testing was conducted in Argonne National Laboratory’s high-temperature thermal energy storage test system. Results on the EPCM fracture stress, the melting/solidification characteristics of the EPCM capsules, the temperature repeatability under similar test conditions, and the heat balance for melting/solidification processes are presented in this report.

14 SOLAR ENERGY↗

Prototype Ceramic HEPA Filter Testing and Filter Media Research and Development for Nuclear Facility Ventilation

This is a brief summary of recent and past Ceramic HEPA Filter research and development activities under an NNSA NSR&D funded project and describes on-going plans for FY19 work as presently planned. Prior work has evaluated concepts for a ceramic HEPA filter including ceramic support materials, filter media including electrospun filter media, and metal housing designs to accommodate the conservative temperature performance target of up to 500°C. This has been supported by modelling efforts discussed with nuclear facility system engineers and their management. The temperature and time-attemperature are based on conservative, bounding temperatures from fire analysis presented as an EFCOG best practice paper for nuclear facility safety analysis. The overall goal is to improve safety of DOE nuclear facilities during fire scenarios by developing improved filtration technology including increasing temperature performance while maintaining acceptable filter pressure drop. Ceramic filtration technology can provide robust, passive mitigation against radiological releases. The goal of the ceramic HEPA filter is to provide a HEPA filter that provides increased temperature performance in an equivalent form factor (size and shape) that is similar to existing conventional HEPA filters used in facilities. Once development is complete and qualified for use in facilities, ceramic HEPA filters could simplify and reduce safety and support system costs, as well as lower life-cycle costs. Installation, monitoring, and maintenance of active fire suppression systems, as well as other related systems, are a considerable on-going cost to nuclear facilities. Reducing the level of dependence on Safety Class and Safety Significant fire alarm and fire suppression systems could allow significant cost savings. At present we are continuing research and development efforts towards the goal of a ceramic filter design, including improved ceramic filter media, that could reduce total operation cost for facilities utilizing HEPA filters.

36 MATERIALS SCIENCE↗

Development of a Modeling Approach to Describe Thermal Conductivity of Prototypic SiC-SiC tubes for LWR Fuel Cladding

SiC-SiC composites are a promising material intended to be used as a for fuel cladding for Light Water Reactors (LWRs). This material has a high steam oxidation resistance, high strength and low neutron cross section. Thermal conductivity is one of the most important physical properties for assessing the performance of SiC based fuel cladding. However, there is a significant lack of data for tube materials because measurement is challenging owing to the specimen geometry. This report summarizes the modeling methodology, experimental methodologies and software that will be used to study the thermal conductivity of different SiC-SiC composite tubes. The proposed experiments described here, are directed to create a baseline of thermal conductivity values to validate experimental simulations. In order to obtain the thermal conductivity of these materials the Laser Flash Analysis (LFA) will be implemented to obtain the thermal diffusivity of flat and sections of round shape specimens. Thermal diffusivity experiments will be complemented by Finite Element Method (FEM) simulations and a branch of this methodology known as Image-Based Finite Element Method (IBFEM). The FEM simulations will help to identify the possible limitations of experimental measurements in round shape specimens and verify the results of experiments in flat shape samples. The results of the IBFEM will help to quantify the possible effects of porosity in SiC-SiC composites. The findings of the aforementioned activities will be also applied to SiC-SiC neutron irradiated tube samples in order to capture the damage produced by this ageing mechanism.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗