Search NASA⌕ Search

SEARCH · Search NASA

Results for “sample activation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

X-ray detected active galactic nuclei in dwarf galaxies at 0 < z < 1

We present a sample of accreting supermassive black holes (SMBHs) in dwarf galaxies at z<1. We identify dwarf galaxies in the NEWFIRM Medium Band Survey with stellar masses of M{sub ⋆}<3×10{sup 9} M{sub ⊙} that have spectroscopic redshifts from the DEEP2 survey and lie within the region covered by deep (flux limit of ∼5×10{sup −17}--6×10{sup −16} erg cm{sup −2} s{sup −1}) archival Chandra X-ray data. From our sample of 605 dwarf galaxies, 10 exhibit X-ray emission consistent with that arising from active galactic nucleus (AGN) activity. If black-hole mass scales roughly with stellar mass, then we expect that these AGNs are powered by SMBHs with masses of ∼10{sup 5}--10{sup 6} M{sub ⊙} and typical Eddington ratios of ∼5%. Furthermore, we find an AGN fraction consistent with extrapolations of other searches of ∼0.6%--3% for 10{sup 9} M{sub ⊙}⩽M{sub ⋆}⩽3×10{sup 9} M{sub ⊙} and 0.1<z<0.6. Our AGN fraction is in good agreement with a semi-analytic model, suggesting that, as we search larger volumes, we may use comparisons between observed AGN fractions and models to understand seeding mechanisms in the early universe.

79 ASTRONOMY AND ASTROPHYSICS↗

INVESTIGATION OF THE TOTAL ORGANIC HALOGEN ANALYTICAL METHOD AT THE WASTE SAMPLING CHARACTERIZATION FACILITY (WSCF)

Total organic halogen (TOX) is used as a parameter to screen groundwater samples at the Hanford Site. Trending is done for each groundwater well, and changes in TOX and other screening parameters can lead to costly changes in the monitoring protocol. The Waste Sampling and Characterization Facility (WSCF) analyzes groundwater samples for TOX using the United States Environmental Protection Agency (EPA) SW-846 method 9020B (EPA 1996a). Samples from the Soil and Groundwater Remediation Project (S&GRP) are submitted to the WSCF for analysis without information regarding the source of the sample; each sample is in essence a 'blind' sample to the laboratory. Feedback from the S&GRP indicated that some of the WSCF-generated TOX data from groundwater wells had a number of outlier values based on the historical trends (Anastos 2008a). Additionally, analysts at WSCF observed inconsistent TOX results among field sample replicates. Therefore, the WSCF lab performed an investigation of the TOX analysis to determine the cause of the outlier data points. Two causes were found that contributed to generating out-of-trend TOX data: (1) The presence of inorganic chloride in the groundwater samples: at inorganic chloride concentrations greater than about 10 parts per million (ppm), apparent TOX values increase with increasing chloride concentration. A parallel observation is the increase in apparent breakthrough of TOX from the first to the second activated-carbon adsorption tubes with increasing inorganic chloride concentration. (2) During the sample preparation step, excessive purging of the adsorption tubes with oxygen pressurization gas after sample loading may cause channeling in the activated-carbon bed. This channeling leads to poor removal of inorganic chloride during the subsequent wash step with aqueous potassium nitrate. The presence of this residual inorganic chloride then produces erroneously high TOX values. Changes in sample preparation were studied to more effectively remove inorganic chloride from the activated carbon adsorption tubes. With the TOX sample preparation equipment and TOX analyzers at WSCF, the nitrate wash recommended by EPA SW-846 method 9020B was found to be inadequate to remove inorganic chloride interference. Increasing the nitrate wash concentration from 10 grams per liter (g/L) to 100 g/L potassium nitrate and increasing the nitrate wash volume from 3 milliliters (mL) to 10 mL effectively removed the inorganic chloride up to at least 100 ppm chloride in the sample matrix. Excessive purging of the adsorption tubes during sample preparation was eliminated. These changes in sample preparation have been incorporated in the analytical procedure. The results using the revised sample preparation procedure show better agreement of TOX values both for replicate analyses of single samples and for the analysis of replicate samples acquired from the same groundwater well. Furthermore, less apparent column breakthrough now occurs with the revised procedure. One additional modification made to sample preparation was to discontinue the treatment of groundwater samples with sodium bisulfite. Sodium bisulfite is used to remove inorganic chlorine from the sample; inorganic chlorine is not expected to be a constituent in these groundwater samples. Several other factors were also investigated as possible sources of anomalous TOX results: (1) Instrument instability: examination of the history of results for TOX laboratory control samples and initial calibration verification standards indicate good long-term precision for the method and instrument. Determination of a method detection limit of 2.3 ppb in a deionized water matrix indicates the method and instrumentation have good stability and repeatability. (2) Non-linear instrument response: the instrument is shown to have good linear response from zero to 200 parts per billion (ppb) TOX. This concentration range encompasses the majority of samples received at WSCF for TOX analysis. (3) Improper sample preservation: ion-chromatographic analysis of several samples with anomalous TOX results revealed that the samples were properly preserved with sulfuric acid and not hydrochloric acid.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effect of Milling Parameters on the Dehydrogenation Properties of the Mg-Ti-H system

Magnesium-based alloys are promising candidates as potential hydrogen storage materials due to their inherent high hydrogen contents. Small particle size which can be achieved by milling, and small amounts of transition-metal compounds as catalysts result in increased hydrogen release/uptake kinetics. In this work, we examined the effects of various milling parameters and TiH2 content on the dehydrogenation properties of the Mg-Ti-H system. The samples were prepared with different amounts of TiH2 using various milling methods and conditions. The activation energy and the enthalpy change of dehydrogenation of the milled samples were determined by Thermogravimetric Analysis (TGA) and Differential Thermal Analyzer (DTA). The results indicated that the activation energy and enthalpy change of MgH2 dehydrogenation were significantly reduced when 9.1 mol % of TiH2 was added to it and the mixture was milled in a dual planet

08 HYDROGEN↗

DO BARS TRIGGER ACTIVITY IN GALACTIC NUCLEI?

We investigate the connection between the presence of bars and active galactic nucleus (AGN) activity, using a volume-limited sample of {approx}9000 late-type galaxies with axis ratio b/a > 0.6 and M{sub r} < -19.5 + 5 log h at low redshift (0.02 {<=} z {approx}< 0.055), selected from Sloan Digital Sky Survey Data Release 7. We find that the bar fraction in AGN-host galaxies (42.6%) is {approx}2.5 times higher than in non-AGN galaxies (15.6%), and that the AGN fraction is a factor of two higher in strong-barred galaxies (34.5%) than in non-barred galaxies (15.0%). However, these trends are simply caused by the fact that AGN-host galaxies are on average more massive and redder than non-AGN galaxies because the fraction of strong-barred galaxies (f{sub SB}) increases with u - r color and stellar velocity dispersion. When u - r color and velocity dispersion (or stellar mass) are fixed, both the excess of f{sub SB} in AGN-host galaxies and the enhanced AGN fraction in strong-barred galaxies disappears. Among AGN-host galaxies we find no strong difference of the Eddington ratio distributions between barred and non-barred systems. These results indicate that AGN activity is not dominated by the presence of bars, and that AGN power is not enhanced by bars. In conclusion, we do not find clear evidence that bars trigger AGN activity.

79 ASTRONOMY AND ASTROPHYSICS↗

Physics-Informed Active Learning With Simultaneous Weak-Form Latent Space Dynamics Identification

The parametric greedy latent space dynamics identification (gLaSDI) framework has demonstrated promising potential for accurate and efficient modeling of high-dimensional nonlinear physical systems. However, it remains challenging to handle noisy data. Here, to enhance robustness against noise, we incorporate the weak-form estimation of nonlinear dynamics (WENDy) into gLaSDI. In the proposed weak-form gLaSDI (WgLaSDI) framework, an autoencoder and WENDy are trained simultaneously to discover intrinsic nonlinear latent-space dynamics of high-dimensional data. Compared with the standard sparse identification of nonlinear dynamics (SINDy) employed in gLaSDI, WENDy enables variance reduction and robust latent space discovery, therefore leading to more accurate and efficient reduced-order modeling. Furthermore, the greedy physics-informed active learning in WgLaSDI enables adaptive sampling of optimal training data on the fly for enhanced modeling accuracy. The effectiveness of the proposed framework is demonstrated by modeling various nonlinear dynamical problems, including viscous and inviscid Burgers' equations, time-dependent radial advection, and the Vlasov equation for plasma physics. With data that contains 5%–10% Gaussian white noise, WgLaSDI outperforms gLaSDI by orders of magnitude, achieving 1%–7% relative errors. Compared with the high-fidelity models, WgLaSDI achieves 121 to 1779x speed-up.

97 MATHEMATICS AND COMPUTING↗

Uranium integral fission product yields for a spectrally-shaped 14.1 MeV neutron source at the National Ignition Facility

This paper describes the experimental results for an energy tuning assembly created to modify the National Ignition Facility deuterium–tritium fusion neutron source into a notional thermonuclear and prompt fission neutron spectrum, which has applications in integral measurements, nuclear data benchmarks, and radiation effects on microelectronics. The Monte Carlo neutron transport utilized MCNP5 to estimate the ETA-modified fluence using the ENDF-B/VIII.0 and IRDFF-II continuous energy nuclear data libraries, and SCALE Sampler was used to estimate the systematic nuclear data covariance using ENDF-B/VII.1 and IRDFF-II in a 252-group structure. The experiment fielded eight activation foils and a highly enriched uranium sample. This provided fifteen reaction channels that were used in a forward-fit comparison to the modeled results and to unfold the neutron spectrum using STAYSL. Gamma-ray spectrometry was performed on the activation and highly enriched uranium foils, and the reduced Χ 2 between the modeled and experimental values was 1.21. The results from the STAYSL unfold, reduced Χ 2 = 1.62, indicated that the modeled neutron spectrum was achieved and the systematic nuclear data uncertainty associated with the neutron transport and activation product cross sections was representative of the experiment. Integral cumulative fission product yield data were collected for 37 mass chains with a combination of gamma-ray spectrometry and radiochemical analysis. Fission product analysis was generally in agreement with two models using a semi-empirical fit and the General Observables of Fission code, with the exception of mass chains 88, 109, 111, 112, 113, 129, 139, 142, 144, 151, and 156.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Infrared-active phonon modes in single-crystal thorium dioxide and uranium dioxide

The infrared-active phonon modes, in single-crystal samples of thorium dioxide (ThO 2 ) and uranium dioxide (UO 2 ), were investigated using spectroscopic ellipsometry and compared with density functional theory. Both ThO 2 and UO 2 are found to have one infrared-active phonon mode pair [consisting of one transverse optic (TO) and one associated longitudinal optic (LO) mode], which is responsible for the dominant features in the ellipsometric data. Furthermore, at room temperature, our results for the mode pair’s resonant frequencies and broadening parameters are comparable with previous reflectance spectroscopy characterizations and density functional theory predictions. For ThO 2 , our ellipsometry and density function theory results both show that the LO mode broadening parameter is larger than the TO mode broadening. This signifies mode anharmonicity, which can be attributed to the intrinsic phonon–phonon interaction. In addition to the main mode pair, a broad low-amplitude impurity-like vibrational mode pair is detected within the reststrahlen band for both ThO 2 and UO 2 . Elevated temperature measurements were performed for ThO 2 in order to study the mechanisms by which the phonon parameters evolve with increased heat. The observed change in the TO resonant frequency is in excellent agreement with previous density functional calculations, which only consider volume expansion of the crystal lattice. This suggests that the temperature-dependent change in the TO frequency is primarily due to volume expansion. The change in the main mode pair’s broadening parameters is nearly linear within the temperature range of this study, which indicates the intrinsic anharmonic scattering (via cubic anharmonicities) as the main decay mechanism.

36 MATERIALS SCIENCE↗

Organic carbon burial by river meandering partially offsets bank erosion carbon fluxes in a discontinuous permafrost floodplain

Abstract. Arctic river systems erode permafrost in their banks and mobilize particulate organic carbon (OC). Meandering rivers can entrain particulate OC from permafrost many meters below the depth of annual thaw, potentially enabling the production of greenhouse gases. However, the amount and fate of permafrost OC that is mobilized by river erosion is uncertain. To constrain OC fluxes due to riverbank erosion and deposition, we collected riverbank and floodplain sediment samples along the Koyukuk River, which meanders through discontinuous permafrost in the Yukon River watershed, Alaska, USA, with an average migration rate of 0.52 m yr−1. We measured sediment total OC (TOC) content, radiocarbon activity, water content, bulk density, grain size, and floodplain stratigraphy. Radiocarbon activity and TOC content were higher in samples dominated by silt as compared to sand, which we used to map OC content onto floodplain stratigraphy and estimate carbon fluxes due to river meandering. Results showed that the Koyukuk River erodes and re-deposits a substantial flux of OC each year due to its depth and high migration rate, generating a combined OC flux of a similar magnitude to the floodplain net ecological productivity. However, sediment being eroded from cutbanks and deposited as point bars had similar OC stocks (mean ± 1 SD of 125.3±13.1 kg OC m−2 in cutbanks versus 114.0±15.7 kg OC m−2 in point bars) whether or not the banks contained permafrost. We also observed radiocarbon-depleted biospheric OC in both cutbanks and permafrost-free point bars. These results indicate that a substantial fraction of aged biospheric OC that is liberated from floodplains by bank erosion is subsequently re-deposited in point bars rather than being oxidized. The process of aging, erosion, and re-deposition of floodplain organic material may be intrinsic to river–floodplain dynamics, regardless of permafrost content.

54 ENVIRONMENTAL SCIENCES↗

Iterative sampling of expensive simulations for faster deep surrogate training

Deep neural network (DNN) surrogates of expensive physics simulations are enabling a rapid change in the way that common experimental design and analysis tasks are approached. Surrogate models allow simulations to be performed in parallel and separately from downstream tasks, thereby enabling analyses that would be impossible with the simulation in-the-loop; surrogates based on DNNs can effectively emulate diverse non-scalar data of the types collected in fusion and laboratory-astrophysics experiments. The challenge is in training the surrogate model, for which large ensembles of physics simulations must be run, preferably without wasting computational effort on uninteresting simulations. Here, in this paper, we present an iterative sampling scheme that can preferentially propose simulations in interesting regions of parameter space without neglecting unexplored regions, allowing high-quality and wide-ranging surrogate models to be trained using 2–3 times fewer simulations compare to space-filling designs. Our approach uses an explicit importance function defined on the simulation output space, balanced against a measure of simulation density which serves as a proxy for surrogate accuracy. It is easy to implement and can be tuned to find interesting simulations early in the study, allowing surrogates to be trained quickly and refined as new simulations become available; this represents an important step towards the routine generation of deep surrogate models quickly enough to be truly relevant to experimental work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NEEMO 20: Science Training, Operations, and Tool Development

The 20th mission of the National Aeronautics and Space Administration (NASA) Extreme Environment Mission Operations (NEEMO) was a highly integrated evaluation of operational protocols and tools designed to enable future exploration beyond low-Earth orbit. NEEMO 20 was conducted from the Aquarius habitat off the coast of Key Largo, FL in July 2015. The habitat and its surroundings provide a convincing analog for space exploration. A crew of six (comprised of astronauts, engineers, and habitat technicians) lived and worked in and around the unique underwater laboratory over a mission duration of 14-days. Incorporated into NEEMO 20 was a diverse Science Team (ST) comprised of geoscientists from the Astromaterials Research and Exploration Science (ARES/XI) Division from the Johnson Space Center (JSC), as well as marine scientists from the Department of Biological Sciences at Florida International University (FIU). This team trained the crew on the science to be conducted, defined sampling techniques and operational procedures, and planned and coordinated the science focused Extra Vehicular Activities (EVAs). The primary science objectives of NEEMO 20 was to study planetary sampling techniques and tools in partial gravity environments under realistic mission communication time delays and operational pressures. To facilitate these objectives two types of science sites were employed 1) geoscience sites with available rocks and regolith for testing sampling procedures and tools and, 2) marine science sites dedicated to specific research focused on assessing the photosynthetic capability of corals and their genetic connectivity between deep and shallow reefs. These marine sites and associated research objectives included deployment of handheld instrumentation, context descriptions, imaging, and sampling; thus acted as a suitable proxy for planetary surface exploration activities. This abstract briefly summarizes the scientific training, scientific operations, and tool development conducted during NEEMO 20 with an emphasis on the primary lessons learned.

Graff, T.↗

The Challenge Posed by Geomagnetic Activity to Electric Power Reliability: Evidence from England and Wales

This paper addresses whether geomagnetic activity challenged the reliability of the electric power system during part of the declining phase of solar cycle 23. Operations by National Grid in England and Wales are examined over the period of 11 March 2003 through 31 March 2005. This paper examines the relationship between measures of geomagnetic activity and a metric of challenged electric power reliability known as the net imbalance volume (NIV). Measured in megawatt hours, NIV represents the sum of all energy deployments initiated by the system operator to balance the electric power system. The relationship between geomagnetic activity and NIV is assessed using a multivariate econometric model. The model was estimated using half-hour settlement data over the period of 11 March 2003 through 31 December 2004. The results indicate that geomagnetic activity had a demonstrable effect on NIV over the sample period. Based on the parameter estimates, out-of-sample predictions of NIV were generated for each half hour over the period of 1 January to 31 March 2005. Consistent with the existence of a causal relationship between geomagnetic activity and the electricity market imbalance, the root-mean-square error of the out-of-sample predictions of NIV is smaller; that is, the predictions are more accurate, when the statistically significant estimated effects of geomagnetic activity are included as drivers in the predictions.

Forbes, Kevin F.↗

Achieving Accuracy Requirements for Forest Biomass Mapping: A Data Fusion Method for Estimating Forest Biomass and LiDAR Sampling Error with Spaceborne Data

The synergistic use of active and passive remote sensing (i.e., data fusion) demonstrates the ability of spaceborne light detection and ranging (LiDAR), synthetic aperture radar (SAR) and multispectral imagery for achieving the accuracy requirements of a global forest biomass mapping mission. This data fusion approach also provides a means to extend 3D information from discrete spaceborne LiDAR measurements of forest structure across scales much larger than that of the LiDAR footprint. For estimating biomass, these measurements mix a number of errors including those associated with LiDAR footprint sampling over regional - global extents. A general framework for mapping above ground live forest biomass (AGB) with a data fusion approach is presented and verified using data from NASA field campaigns near Howland, ME, USA, to assess AGB and LiDAR sampling errors across a regionally representative landscape. We combined SAR and Landsat-derived optical (passive optical) image data to identify forest patches, and used image and simulated spaceborne LiDAR data to compute AGB and estimate LiDAR sampling error for forest patches and 100m, 250m, 500m, and 1km grid cells. Forest patches were delineated with Landsat-derived data and airborne SAR imagery, and simulated spaceborne LiDAR (SSL) data were derived from orbit and cloud cover simulations and airborne data from NASA's Laser Vegetation Imaging Sensor (L VIS). At both the patch and grid scales, we evaluated differences in AGB estimation and sampling error from the combined use of LiDAR with both SAR and passive optical and with either SAR or passive optical alone. This data fusion approach demonstrates that incorporating forest patches into the AGB mapping framework can provide sub-grid forest information for coarser grid-level AGB reporting, and that combining simulated spaceborne LiDAR with SAR and passive optical data are most useful for estimating AGB when measurements from LiDAR are limited because they minimized forest AGB sampling errors by 15 - 38%. Furthermore, spaceborne global scale accuracy requirements were achieved. At least 80% of the grid cells at 100m, 250m, 500m, and 1km grid levels met AGB density accuracy requirements using a combination of passive optical and SAR along with machine learning methods to predict vegetation structure metrics for forested areas without LiDAR samples. Finally, using either passive optical or SAR, accuracy requirements were met at the 500m and 250m grid level, respectively.

Montesano, P. M.↗

Development of field-based separations for the rapid identification of uranium and plutonium

The development of rapid, radioanalytical techniques to separate uranium and plutonium from complex, field samples are needed for the timely and accurate determination of nuclear material origin, and processing activities. Widespread use of nuclear power and technology in the world has increased demands on analytical laboratories from the monitoring of numerous low-level, environmental samples with variable compositions. Environmental sampling has proven to be one of the strongest technical measures for detecting nuclear material and activities. With the increase in sampling demands, new technologies must offer improvements such as automation, high throughput, reproducible chemical separations, short analysis times, and reduced costs to be effective. We have been developing a portable, separations system for uranium (U) and plutonium (Pu) separations based upon selective extraction of target elements using an extraction chromatographic resin which would allow for simple and fast identifcation when coupled with the appropriate sample digestor and detection systems. The microfluidic design minimizes elution volumes and concentrates the elements of interest in a purified stream. Flowsheet development and testing was demonstrated on a single, micro-column system with an acidified, iron, uranium, and plutonium nitrate stream. The recovery of Pu was optimized by examining various reducing agents at different concentrations for rapid, quantitative recovery from the flow-through design. Quantitative recovery and high selectivity of U and Pu was achieved in the appropriate stripping stages and provided purified and concentrated U and Pu streams. The microfluidic system suggests automation in a small, footprint unit while exploiting the in-line processing of extraction chromatographic resins as the primary means of concentrating the radionuclides from the raw acidic feed and separating the elements into purified streams.

Extraction Chromatography↗

Superior Fischer-Tropsch Performance of Uniform Cobalt Nanoparticles Deposited into Mesoporous SiC

Electrochemically-derived well-crystalline mesoporous silicon carbide (pSiC) was used to host cobalt nanoparticles and to show superior catalytic performance during the CO hydrogenation according to Fischer-Tropsch. Colloidal metal particles (9 ± 0.4 nm) were prepared independently before depositing them into pSiC and, for comparison purposes, into commercially available silica (Davisil) and foam-like MCF-17 supports. The Co/pSiC catalyst demonstrated the highest catalytic activity of 117 ?molCO gCo-1 s-1 at 220 °C in the Fischer-Tropsch reaction, while the silica supported cobalt samples showed about one order of magnitude less activity. A significant increase in the C5+ hydrocarbons selectivity for Co/pSiC was observed. The stable performance of the catalyst is attributed to the high dispersion of the active phase and the use of silicon carbide acting as a thermally conductive and chemically inert porous support.

lablokou, V. S.↗

Pyrolysis of municipal plastic wastes II: Influence of raw material composition under catalytic conditions

Highlights: > ZSM-5 zeolite catalytic pyrolysis transforms municipal plastic waste into liquids and gases useful as fuels or source of chemicals. > The composition of the waste sample plays an important role on the catalyst activity and the products obtained. > ZSM-5 zeolite is somehow deactivated when high proportions of fine inorganic materials are present in the sample. > When the sample contains cellulose-based materials, the formation of a two-phase liquid fraction can be avoided by a low temperature step. - Abstract: In this work, the results obtained in catalytic pyrolysis of three plastic waste streams which are the rejects of an industrial packing wastes sorting plant are presented. The samples have been pyrolysed in a 3.5 dm{sup 3} reactor under semi-batch conditions at 440 {sup o}C for 30 min in nitrogen atmosphere. Commercial ZSM-5 zeolite has been used as catalyst in liquid phase contact. In every case, high HHV gases and liquids which can be useful as fuels or source of chemicals are obtained. A solid fraction composed of the inorganic material contained in the raw materials and some char formed in the pyrolysis process is also obtained. The zeolite has shown to be very effective to produce liquids with great aromatics content and C3-C4 fraction rich gases, even though the raw material was mainly composed of polyolefins. The characteristics of the pyrolysis products as well as the effect of the catalyst vary depending on the composition of the raw material. When paper rich samples are pyrolysed, ZSM-5 zeolite increases water production and reduces CO and CO{sub 2} generation. If stepwise pyrolysis is applied to such sample, the aqueous liquid phase can be separated from the organic liquid fraction in a first low temperature step.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

THE STELLAR-ACTIVITY-ROTATION RELATIONSHIP AND THE EVOLUTION OF STELLAR DYNAMOS

We present a sample of 824 solar and late-type stars with X-ray luminosities and rotation periods. This is used to study the relationship between rotation and stellar activity and derive a new estimate of the convective turnover time. From an unbiased subset of this sample the power-law slope of the unsaturated regime, L{sub X} /L{sub bol}{proportional_to}Ro{sup {beta}}, is fit as {beta} = -2.70 {+-} 0.13. This is inconsistent with the canonical {beta} = -2 slope to a confidence of 5{sigma}, and argues for an additional term in the dynamo number equation. From a simple scaling analysis this implies {Delta}{Omega}/{Omega}{proportional_to}{Omega}{sup 0.7}, i.e., the differential rotation of solar-type stars gradually declines as they spin down. Supersaturation is observed for the fastest rotators in our sample and its parametric dependencies are explored. Significant correlations are found with both the corotation radius and the excess polar updraft, the latter theory providing a stronger dependence and being supported by other observations. We estimate mass-dependent empirical thresholds for saturation and supersaturation and map out three regimes of coronal emission. Late F-type stars are shown never to pass through the saturated regime, passing straight from supersaturated to unsaturated X-ray emission. The theoretical threshold for coronal stripping is shown to be significantly different from the empirical saturation threshold (Ro < 0.13), suggesting it is not responsible. Instead we suggest that a different dynamo configuration is at work in stars with saturated coronal emission. This is supported by a correlation between the empirical saturation threshold and the time when stars transition between convective and interface sequences in rotational spin-down models.

79 ASTRONOMY AND ASTROPHYSICS↗

QUANTIFYING THE ANISOTROPY IN THE INFRARED EMISSION OF POWERFUL ACTIVE GALACTIC NUCLEI

We use rest-frame near- and mid-IR data of an isotropically selected sample of quasars and radio galaxies at 1.0 {<=} z {<=} 1.4, which have been published previously by Leipski et al., to study the wavelength-dependent anisotropy of the IR emission. For that we build average spectral energy distributions of the quasar subsample (= type 1 AGNs) and radio galaxies (= type 2 AGNs) from {approx}1 to 17 {mu}m and plot the ratio of both average samples. From 2 to 8 {mu}m rest-frame wavelengths the ratio gradually decreases from 20 to 2 with values around 3 in the 10 {mu}m silicate feature. Longward of 12 {mu}m, the ratio decreases further and shows some high degree of isotropy at 15 {mu}m (ratio {approx}1.4). The results are consistent with upper limits derived from the X-ray/mid-IR correlation of local Seyfert galaxies. We find that the anisotropy in our high-luminosity radio-loud sample is smaller than in radio-quiet lower-luminosity active galactic nuclei (AGNs) which may be interpreted in the framework of a receding torus model with luminosity-dependent obscuration properties. It is also shown that the relatively small degree of anisotropy is consistent with clumpy torus models.

79 ASTRONOMY AND ASTROPHYSICS↗

THE EFFECTS OF CLOSE COMPANIONS (AND ROTATION) ON THE MAGNETIC ACTIVITY OF M DWARFS

We present a study of close white dwarf and M dwarf (WD+dM) binary systems and examine the effect that a close companion has on the magnetic field generation in M dwarfs. We use a base sample of 1602 white dwarf main-sequence binaries from Rebassa-Mansergas et al. to develop a set of color cuts in GALEX, SDSS, UKIDSS, and 2MASS color space. Then using the SDSS Data Release 8 spectroscopic database, we construct a sample of 1756 WD+dM high-quality pairs from our color cuts and previous catalogs. We separate the individual WD and dM from each spectrum using an iterative technique that compares the WD and dM components to best-fit templates. Using the absolute height above the Galactic plane as a proxy for age, and the H{alpha} emission line as an indicator for magnetic activity, we investigate the age-activity relation for our sample for spectral types {<=} M7. Our results show that early-type M dwarfs ({<=}M4) in close binary systems are more likely to be active and have longer activity lifetimes compared to their field counterparts. However, at a spectral type of M5 (just past the onset of full convection in M dwarfs), the activity fraction and lifetimes of WD+dM binary systems become more comparable to that of the field M dwarfs. One of the implications of having a close binary companion is presumed to be increased stellar rotation through disk disruption, tidal effects, or angular momentum exchange. Thus, we interpret the similarity in activity behavior between late-type dMs in WD+dM pairs and late-type field dMs to be due to a decrease in sensitivity in close binary companions (or stellar rotation), which has implications for the nature of magnetic activity in fully convective stars. Using the WD components of the pairs, we find WD cooling ages to use as an additional constraint on the age-activity relation for our sample. We find that, on average, active early-type dMs tend to be younger and that active late-type dMs span a much broader age regime making them indistinguishable from the inactive late-type population. We also show that magnetic strength, as measured by H{alpha}, is comparable between paired and field M dwarfs until a spectral type of M6/M7 where M dwarf activity for stars with close companions becomes much stronger. In addition, we present 37 very close candidate pairs with fast-moving orbits that display radial velocity changes over hour timescales.

79 ASTRONOMY AND ASTROPHYSICS↗