Search NASA⌕ Search

SEARCH · Search NASA

Results for “structured light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

The crystal structure of TlMgCl 3 from 290 K to 725 K

The title compound, thallium magnesium trichloride, has been identified as a scintillator with both moderate gamma-stopping power and moderate light yield. Knowledge of its crystal structure is needed for further development. This work determines the crystal structure of TlMgCl 3 to be hexa­gonal P6 3 /mmc (No. 194) and isostructural with RbMgCl 3 , contrary to previously reported data. This structure was obtained by single-crystal X-ray diffraction and was further confirmed by neutron diffraction measurements. Extending neutron diffraction measurements to high temperature, the data show that TlMgCl 3 maintains this crystal structure from 290 K up through 725 K, approaching the melting point of 770 K. Anisotropic thermal expansion coefficients increase over this temperature range, from 31 to 38 × 10 –6 K –1 along the a axis and from 19 to 34 × 10 –6 K –1 along the c axis.

36 MATERIALS SCIENCE↗

Environment-sensitivity functions for gross primary productivity in light use efficiency models

The sensitivity of photosynthesis to environmental changes is essential for understanding carbon cycle responses to global climate change and for the development of modeling approaches that explains its spatial and temporal variability. We collected a large variety of published sensitivity functions of gross primary productivity (GPP) to different forcing variables to assess the response of GPP to environmental factors. These include the responses of GPP to temperature; vapor pressure deficit, some of which include the response to atmospheric CO 2 concentrations; soil water availability (W); light intensity; and cloudiness. These functions were combined in a full factorial light use efficiency (LUE) model structure, leading to a collection of 5600 distinct LUE models. Each model was optimized against daily GPP and evapotranspiration fluxes from 196 FLUXNET sites and ranked across sites based on a bootstrap approach. The GPP sensitivity to each environmental factor, including CO 2 fertilization, was shown to be significant, and that none of the previously published model structures performed as well as the best model selected. From daily and weekly to monthly scales, the best model's median Nash-Sutcliffe model efficiency across sites was 0.73, 0.79 and 0.82, respectively, but poorer at annual scales (0.23), emphasizing the common limitation of current models in describing the interannual variability of GPP. Although the best global model did not match the local best model at each site, the selection was robust across ecosystem types. The contribution of light saturation and cloudiness to GPP was observed across all biomes (from 23% to 43%). Temperature and W dominates GPP and LUE but responses of GPP to temperature and W are lagged in cold and arid ecosystems, respectively. The findings of this study provide a foundation towards more robust LUE-based estimates of global GPP and may provide a benchmark for other empirical GPP products.

54 ENVIRONMENTAL SCIENCES↗

Facile and Green Preparation of Three-Dimensionally Nanoporous Copper Films by Low-Current Electrical Field-Induced Assembly of Copper Nanoparticles for Lithium-Ion Battery Applications

Porous copper (Cu) films were facilely and greenly fabricated by low-current electrical field-induced assembly of ~ 3 nm Cu nanoparticles (NPs) in several minutes using generated hydrogen bubbles as dynamic negative templates. The porous films had open three-dimensionally (3D) interconnected nanopores and uniform pore size distribution and exhibited a hierarchical structure composed of supraparticles that were further composed of the Cu NPs. Lattice-to-lattice connectivity in the self-assembly of the NPs in the 3D structures enables fast charge transport. The structure/morphology of the porous Cu materials can be tuned by adjusting the concentration of the additives, applied potential/current densities and assembly time. A growth mechanism of the porous films was reasonably proposed for the field-induced assembly of the Cu NPs. The porous Cu film-supported Si electrode showed high capacity of 1173 mAh g{sup −1} and retention rate of 87% after 10 cycles at 1 C. Our research sheds a light on preparing 3D nanoporous structures especially for suitable electrodes in electrochemical energy storage devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Novel Biomedical Device Utilizing Light-Emitting Nanostructures Developed

Sketches and chemical diagrams of state-of-the-art device and novel proposed device are presented. Current device uses a diode laser that emits into a fluorescent fluid only one wavelength and a photodetector diode that detects only one wavelength. Only one type of bacteria can be detected. The proposed device uses a quantum dot array that emits into a fluorescent fluid multiple wavelengths and an NIR 512 spectrometer that scans 0.8- to 1.7-mm wavelengths. Hundreds of different bacteria and viruses can be detected. A novel biomedical device is being developed at the NASA Glenn Research Center in cooperation with the University of Michigan. This device uses nano-structured quantum dots that emit light in the near-infrared (IR) region. The nanostructured quantum dots are used as a source and excite fluorochrome polymers coupled with antibodies that seek out and attach to specific bacteria and viruses. The fluorochrome polymers/antibodies fluoresce at specific wavelengths in the near-IR spectrum, but these wavelengths are offset from the excitation wavelength and can be detected with a tunable spectrometer. The device will be used to detect the presence of viruses and bacteria in simple fluids and eventually in more complex fluids, such as blood. Current state-of-the-art devices are limited to single bacteria or virus detection and a considerable amount of time and effort is required to prepare samples for analysis. Most importantly, the devices are quite large and cumbersome, which prohibits them from being used on the International Space Station and the space shuttles. This novel device uses nanostructured quantum dots which, through molecular beam epitaxy and highly selective annealing processes, can be developed into an illumination source that could potentially generate hundreds of specific wavelengths. As a result, this device will be able to excite hundreds of antibody/fluorochrome polymer combinations, which in turn could be used to detect hundreds of bacteria and viruses in fluids. A novel sample preparation technique that exploits micromembrane filtration and centrifugation methods has been developed for this device. The technique greatly reduces the time required to prepare the sample and the amount of sample needed to perform an accurate and comprehensive analysis. Last, and probably most important, because of the nano-light-emitting source and the novel sample preparation technique, the overall size of the device could be reduced dramatically. This device will serve as a nanoscale lab-on-a-chip for in situ microorganism detection and will enable tests to be performed on a time scale of minutes rather than days. Thus, it is ideally suited for monitoring the environmental conditions onboard the International Space Station and the space shuttles, thereby enhancing the safety of the astronauts. In addition, the device has important commercial applications, such as detecting the presence of bacteria and viruses in water at food- and beverage-processing centers, water treatment plants, and restaurants. Also, this technology has the potential to be used to detect bacteria and viruses in more complex fluids, such as blood--which in all likelihood would revolutionize blood analysis as it is performed today. This project was made possible through the Director's Discretionary Fund and is ongoing. In addition, this project provides funding to Dr. Rachel Goldman of the University of Michigan for the research and development of nanostructured quantum dots.

Scardelletti, Maximilian C.↗

An extended Vlasov–Fokker–Planck approach for kinetic simulations of laser plasmas

Vlasov–Fokker–Planck simulation codes occupy an important niche in modeling laser-produced plasmas, since they are well suited to studying the effect of collisions on electron kinetic phenomena, especially energy transport. One of the most important elements of energy transport is the absorption of laser light by the plasma; however, simulating this in detail requires resolving oscillations of the laser light, whose characteristic timescale is orders of magnitude shorter than the simulation time needed to study transport physics. For this reason, most Vlasov–Fokker–Planck codes used to study electron transport in laser plasmas rely on simplified models of the laser–plasma coupling. Their underlying assumptions nominally preclude their use for modeling laser light having short-scale structure in space or time, such as broadband lasers. In this work, we derive a more general computational framework suitable for arbitrarily structured laser fields. Furthermore, our approach is based on an extended set of Vlasov–Fokker–Planck equations that separately solve for the low- and high-frequency plasma response. We implement these extended Vlasov–Fokker–Planck equations in the spherical harmonic code K2 and demonstrate the performance of the method on several laser absorption test problems, with particular attention to the judicious selection of time steps, time integrators, and spherical harmonic truncation, according to the intensity and spectrum of the laser light under consideration. Comparison with the widely used Langdon absorption operator shows the Langdon operator performs remarkably well for predicting laser heating in the simple cases considered here, even in situations that would seem to violate its underlying assumptions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Meso-scale magnetic signatures for nuclear reactor steel irradiation embrittlement monitoring

Verifying the structural integrity of passive components in light water and advanced reactors will be necessary to ensure safe, long-term operations of the existing U.S. nuclear fleet. This objective can be achieved through nondestructive condition monitoring techniques, which can be integrated with plant operations to quantify the “state of health” of structural materials in real-time. While nondestructive methods for monitoring many classes of degradation (such as fatigue or stress corrosion cracking) are relatively advanced, this is not the case for degradation caused by irradiation. The development of nondestructive evaluation technologies for these types of degradation will require advanced materials characterization techniques and tools that enable comprehensive understanding of nuclear reactor material microstructural and behavioral changes under extreme operating environments. Irradiation-induced degradation of reactor steels causes changes in their microstructure that impacts their micro-magnetic properties. In this paper, we describe preliminary results of integrating advanced material characterization techniques with meso-scale computational models. In the future, this will help to provide an interpretive understanding of the state of degradation in structural materials. Microstructural data are presented from monocrystalline Fe and are correlated with variable-field magnetic force microscopy and micro-magnetic measurements. Ongoing research is focused on extending the measurements and models on thin films to gain insights into the structural state of irradiated materials and the resulting impact on magnetic properties. Preliminary conclusions from these correlations are presented, and next steps described.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Generation of propagating backward volume spin waves by phase-sensitive mode conversion in two-dimensional microstructures

We present the generation of propagating backward volume (BV) spin waves in a T shaped Ni{sub 81}Fe{sub 19} microstructure. These waves are created from counterpropagating Damon Eshbach spin waves, which are excited using microstrip antennas. By employing Brillouin light scattering microscopy, we show how the phase relation between the counterpropagating waves determines the mode generated in the center of the structure, and prove its propagation inside the longitudinally magnetized part of the T shaped microstructure. This gives access to the effective generation of backward volume spin waves with full control over the generated transverse mode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-Efficiency AlGaAs/GaAs Photovoltaic Converters with Edge Input of Laser Light

High-efficiency photovoltaic converters (PVCs) have been developed and fabricated by liquidphase epitaxy in the AlGaAs–GaAs system with laser light (λ = 850 nm) introduced through the edge surface in parallel to the plane of the p–n junction of the device structure. To raise the efficiency of light “capture” by the p–n junction, an Al{sub x}Ga{sub 1–x}As waveguide layer is formed, in which the content of aluminum gradually varies from x = 0.55 to 0.15 so that the refractive index gradient is created in this layer and light beams are diverted toward the p–n junction. When a PVC (having no antireflection coating) is exposed to 0.1- to 0.2-W laser light, an efficiency of 41.5% is obtained. Depositing an antireflection coating on the edge surface of a PVC raises its efficiency to 55%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of the Quantrum Structure of Surfaces with Far UV Excitation Spectrosscopies

Clean surfaces and those with adsorbates have been investigated to obtain electronic and atomic structure data. The various modes of synchrotron radiation (SR) photoemission spectroscopy (PES) have been performed mostly beam line 7.0.1 at the Advanced Light Source (ALS) in Berkeley, CA and some at the Synchrotron Radiation Center (SRC) in Madison, WI. These were done on silicon, carbon, and group III nitrides.

36 MATERIALS SCIENCE↗

Visible light laser voltage probing on thinned substrates

The various technologies presented herein relate to utilizing visible light in conjunction with a thinned structure to enable characterization of operation of one or more features included in an integrated circuit (IC). Short wavelength illumination (e.g., visible light) is applied to thinned samples (e.g., ultra-thinned samples) to achieve a spatial resolution for laser voltage probing (LVP) analysis to be performed on smaller technology node silicon-on-insulator (SOI) and bulk devices. Thinning of a semiconductor material included in the IC (e.g., backside material) can be controlled such that the thinned semiconductor material has sufficient thickness to enable operation of one or more features comprising the IC during LVP investigation.

36 MATERIALS SCIENCE↗

Tailoring the highest occupied molecular orbital level of poly(N-vinylcarbazole) hole transport layers in organic multilayer heterojunctions

We report the tailoring of the electronic structure of poly(N-vinylcarbazole) (PVK) using a mixture layer of polyaniline:poly(p-styrenesulfonic acid) (PANI:PSS) in organic multilayer PVK/PANI:PSS/poly(3,4-ethylenedioxythiophene):PSS heterojunctions. The overall electronic structure of the PVK overlayer was systematically down-shifted while the work function of PANI:PSS increased as a function of the PSS-to-PANI weight ratio for the ratio range from 1 to 11 in the PANI:PSS film. The down-shift in the highest occupied molecular orbital of PVK markedly reduced the hole injection barrier from PVK to quantum-dot (QD) layers in QD-light emitting diode (QD-LED) structures, resulting in superior electrical and electroluminescent characteristics for QD-LEDs. The influences of PANI:PSS thickness on the electronic structure of PVK and the performance of QD-LEDs are also discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photo-induced change of dielectric response in BaCoSiO{sub 4} stuffed tridymite

The photodielectric effect is demonstrated in Mott-insulator BaCoSiO{sub 4} with a stuffed-tridymite-type structure under irradiation of visible light at 365 nm. The real part of dielectric permittivity is enhanced by ∼300% with little increase of tan δ in a low-frequency region. Results of diffuse reflectance spectroscopy, first-principles calculations and dielectric measurements suggest that the photodielectric effect stems from a response of photo-excited electrons in an unoccupied upper-Hubbard band for 3d-orbitals of cobalt, which have significantly small mobility due to the unique configuration of Co ions in the stuffed-tridymite-type structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structured illumination of a sub-wavelength hollow-waveguide array

A hollow-waveguide array with sub-wavelength dimensions was suggested earlier as a space-variant polarization converter. For optimum light transmission through the array, periodic structured illumination is generated by using a dielectric grating with the same period. In this paper various numerical simulations are performed. The transmission depends on numerous parameters. Particularly, it is shown how the grating can be optimized and how longitudinal and lateral displacements influence the results. For the considered configuration it is found that the transmission can be increased by factors up to 1.46 (TE) and 1.35 (TM) compared to a uniform illumination of the hollow waveguide array.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Denaturant-Dependent Conformational Changes in a [beta]-Trefoil Protein: Global and Residue-Specific Aspects of an Equilibrium Denaturation Process

Conformational properties of the folded and unfolded ensembles of human interleukin-1 receptor antagonist (IL-1ra) are strongly denaturant-dependent as evidenced by high-resolution two-dimensional nuclear magnetic resonance (NMR), limited proteolysis, and small-angle X-ray scattering (SAXS). The folded ensemble was characterized in detail in the presence of different urea concentrations by 1H-15N HSQC NMR. The {beta}-trefoil fold characteristic of native IL-1ra was preserved until the unfolding transition region beginning at 4 M urea. At the same time, a subset of native resonances disappeared gradually starting at low denaturant concentrations, indicating noncooperative changes in the folded state. Additional evidence of structural perturbations came from the chemical shift analysis, nonuniform and bell-shaped peak intensity profiles, and limited proteolysis. In particular, the following nearby regions of the tertiary structure became progressively destabilized with increasing urea concentrations: the {beta}-hairpin interface of trefoils 1 and 2 and the H2a-H2 helical region. These regions underwent small-scale perturbations within the native baseline region in the absence of populated molten globule-like states. Similar regions were affected by elevated temperatures known to induce irreversible aggregation of IL-1ra. Further evidence of structural transitions invoking near-native conformations came from an optical spectroscopy analysis of its single-tryptophan variant W17A. The increase in the radius of gyration was associated with a single equilibrium unfolding transition in the case of two different denaturants, urea and guanidine hydrochloride (GuHCl). However, the compactness of urea- and GuHCl-unfolded molecules was comparable only at high denaturant concentrations and deviated under less denaturing conditions. Our results identified the role of conformational flexibility in IL-1ra aggregation and shed light on the nature of structural transitions within the folded ensembles of other {beta}-trefoil proteins, such as IL-1{beta} and hFGF-1.

59 BASIC BIOLOGICAL SCIENCES↗

Invariant-mass spectroscopy of 10 B, 11 C, 14 F, 16 F, and 18 Na

The invariant-mass method is used to study the structure of a number of light proton-rich isotopes utilizing fast beams. Reactions where the projectile picks up a proton have been used to study d-wave resonances in 14 F, 16 F, and 18 Na. While the 16 F and 18 Na results are consistent with previous studies, the 14 F results are not consistent with the only previous work. Here, we have tentatively identified the 4 + member of a rotational band in 10 B, which is the analog of well-known states with strong α-cluster structure in 10 Be and 10 C. Finally, spin and parities of newly observed states in 11 C which decay sequentially into three-body exit channels have been determined or restricted.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Crystallographic structure and molecular dynamics simulations of the major endoglucanase from Xanthomonas campestris pv. campestris shed light on its oligosaccharide products release pattern

Cellulases are critical enzymatic components for the transformation of plant biomass into fuels, renewable materials and green chemicals. In this work, we determined the crystal structure, pattern of hydrolysis products release, and conducted molecular dynamics simulations of the major endoglucanase from the Xanthomonas campestris pv. campestris (XccCel5A). XccCel5A has a TIM barrel fold with the catalytic site centrally placed in a binding groove surrounded by aromatic side chains. Molecular dynamics simulations show that productive position of the substrate is secured by a network of hydrogen bonds in the four main subsites, which differ in details from homologous structures. Capillary zone electrophoresis and computational studies reveal XccCel5A can act both as endoglucanase and licheninase, but there are preferable arrangements of substrate regarding β-1,3 and β-1,4 bonds within the binding cleft which are related to the enzymatic efficiency.

59 BASIC BIOLOGICAL SCIENCES↗

High-spatial-resolution studies of young stellar objects. II - A thick disk surrounding Lynds 1551, IRS 5

Heavily oversampled, small (2 arcsec) beam 2 micron maps of the region surrounding Lynds 1551, IRS 5 provide the basis for reconstructing maximum-entropy 'images' which have an effective spatial resolution of about 0.6 arcsec. These images reveal an extended, cusp-like structure surrounding IRS 5. This structure most likely results as light from IRS 5 is scattered in our direction by dust grains located in a thick disk of diameter 1000 AU. The disk is viewed nearly edge-on and has a mass in dust grains of 2 to 5 x 10 to the -5th solar masses. Its polar axis lies along the observed direction of the bipolar mass outflow inferred from molecular line observations of the L1551 cloud. It is possible that the observed infrared disk may represent the inner regions of a much larger thick-disk structure, whose shape derives from the combined effects of disk rotation and the gravitational field of IRS 5.

Strom, S. E.↗

Elucidating a dissolution–deposition reaction mechanism by multimodal synchrotron X-ray characterization in aqueous Zn/MnO 2 batteries

Aqueous Zn/MnO 2 batteries with their environmental sustainability and competitive cost, are becoming a promising, safe alternative for grid-scale electrochemical energy storage. Here, presented as a promising design principle to deliver a higher theoretical capacity, this work offers fundamental understanding of the dissolution–deposition mechanism of Zn/β-MnO 2 . A multimodal synchrotron characterization approach including three operando X-ray techniques (powder diffraction, absorption spectroscopy, and fluorescence microscopy) is coupled with elementally resolved synchrotron X-ray nano-tomography. Together they provide a direct correlation between structural evolution, reaction chemistry, and 3D morphological changes. Operando synchrotron X-ray diffraction and spectroscopy show a crystalline-to-amorphous phase transition. Quantitative modeling of the operando data by Rietveld refinement for X-ray diffraction and multivariate curve resolution (MCR) for X-ray absorption spectroscopy are used in a complementary fashion to track the structural and chemical transitions of both the long-range (crystalline phases) and short-range (including amorphous phases) ordering upon cycling. Scanning X-ray microscopy and full-field nano-tomography visualizes the morphology of electrodes at different electrochemical states with elemental sensitivity to spatially resolve the formation of the Zn- and Mn-containing phases. Overall, this work critically indicates that for Zn/MnO 2 aqueous batteries, the reaction pathways involving Zn–Mn complex formation upon cycling become independent of the polymorphs of the initial electrode and sheds light on the interplay among structural, chemical, and morphological evolution for electrochemically driven phase transitions.

36 MATERIALS SCIENCE↗