Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Effects of defect density on ultrathin graphene-based metal diffusion barriers

The authors investigated the effects of defect density on the performance of monolayer graphene as a barrier to metal diffusion. The defects were introduced to the graphene by controlled ultraviolet-ozone irradiation. The barrier performance of pristine graphene was found to be superior to that of defective graphene at temperatures up to 700 °C. Changes in surface morphology were more prevalent in the defective graphene-based films than in the pristine graphene-based film; the thermal stability of graphene films depends on their defect density. Defect density was found to be a determining factor in the barrier performance of graphene.

42 ENGINEERING↗

Nafion Passivation of c-Si Surface and Edge for Electron Paramagnetic Resonance

Effective surface passivation of crystalline silicon (c-Si) surface by reducing the carrier recombination rate has led to modern c-Si solar cells with efficiencies > 25% in both laboratory and industrial settings. Typical mainstream surface passivation techniques include high-temperature silicon oxide (SiOx), amorphous silicon (a-Si:H), hydrogen-rich silicon nitride (SiNx), and aluminum oxide (Al2O3) [1]. They have demonstrated excellent surface recombination velocity of < 1 cm/s owing to both chemical passivation (via the hydrogen saturation of Si dangling bonds at the c-Si surface), and field-effect passivation (via the band bending from the fixed charge of the dielectric layers). Recently, several groups have studied solution-based organic materials for c-Si passivation, including bis(trifluoromethane)sulfonimide (TFSI), polystyrenesulfonate, and Nafion [2, 3] via spin or dip coating. All films were processed at ambient room temperature, and a high lifetime of 12 ms, as well as a low saturation current density (J0) of 16 fA/cm2, have been demonstrated using Nafion passivation [2]. However, despite the air instability, Nafion has several advantages when introduced to PV applications: (a) Wafer quality can be measured at high throughput after several process stages. (b) It is compatible with PL mapping, compared to HF liquid passivation which cannot be performed in room ambient. (c) Nafion process is fast and poses fewer constraints on process complexity, and cleanness, compared to Al2O3 and a-Si:H passivation. (d) Nafion is the ideal room temperature passivation, which can be applied onto a small fragment of a degraded module to investigate microscopic mechanisms when studying degradation mechanisms. Edge passivation is needed for advanced characterization tests such as Electron Paramagnetic Resonance (EPR), Electrically Detected Magnetic Resonance (EDMR), Deep Level Transient Spectroscopy (DLTS), local cell current-voltage (J-V), and Suns-Voc. In such cases, the laser-damaged minicell edges will obscure the true degradation mechanisms, and Nafion can effectively passivate them without causing further degradation through elevated-temperature processes. In this contribution, we show the passivation results of Nafion on bare nCz and compare it with a Al2O3 witness. We highlight the importance of edge pre-treatment before Nafion to achieve good passivation. We show that Nafion can reach decent passivation without undergoing high-temperature processes. We also explore the temperature dependency of Nafion through photoluminescence (PL) study and demonstrate the application of Nafion under cryogenic temperature (~6 K) through EPR. Our results reveal that Nafion can reduce surface and edge Si dangling bonds at low temperatures. Thus, it can be used as an effective room temperature passivation technique for advanced characterization methods.

c-Si↗

Coexistence of Multilayered Phases of Confined Water: The Importance of Flexible Confining Surfaces

Flexible nanoscale confinement is critical to understanding the role that bending fluctuations play on biological processes where soft interfaces are ubiquitous or to exploit confinement effects in engineered systems where inherently flexible 2D materials are pervasively employed. Here, using molecular dynamics simulations, we compare the phase behavior of water confined between flexible and rigid graphene sheets as a function of the in-plane density, ρ2D. We find that both cases show commensurate mono-, bi-, and trilayered states; however, the water phase in those states and the transitions between them are qualitatively different for the rigid and flexible cases. The rigid systems exhibit discontinuous transitions between an ( n )-layer and an ( n +1)-layer state at particular values of ρ2D, whereas under flexible confinement, the graphene sheets bend to accommodate an ( n )-layer and an (n+1)-layer state coexisting in equilibrium at the same density. We show that the flexible walls introduce a very different sequence of ice phases and their phase coexistence with vapor and liquid phases than that observed with rigid walls. We discuss the applicability of these results to real experimental systems to shed light on the role of flexible confinement and its interplay with commensurability effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Big Area Additive Manufacturing Engineering Development, Process Trials, and Composite Core Fabrication (CRADA NFE-17-06827 Final Report)

Oak Ridge National Laboratory (ORNL) has worked with Raytheon to develop and test the materials necessary to produce a moderately sized boat using Big Area Additive Manufacturing (BAAM). This Phase 2 project focused on printing and testing the components of the boat designed by Raytheon. This involved collaborating on boat design, printing the boat, testing surface coatings, and assembling the boat.

36 MATERIALS SCIENCE↗

Radiation-induced swelling and radiation-induced segregation & precipitation in dual beam irradiated Ferritic/Martensitic HT9 steel

Highlights: • The depth-dependence of radiation-induced cavities was characterized in self-ion irradiated HT9 co-implanted with He. • The injected interstitial effect was revealed to suppress cavity swelling in the vicinity of the damage peak. • ChemiSTEM elemental maps revealed the segregation of Ni at cavity surfaces and its possible synergistic influence on swelling was discussed. - Abstract: Ferritic/Martensitic HT9 steel was irradiated at 432 °C to 16.6 displacements per atom (dpa) (at the depth of 600 nm) using a defocused beam of 5 MeV Fe{sup ++} ions, while co-implanted with 3.22 appm He at the same depth. The helium concentration profile was designed so to follow the damage curve with a 0.22 appm He/dpa ratio at the depth from 300 to 1000 nm in the material. The depth-dependence of the cavity size and number density were characterized by both transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) imaging methods. A comparison between the two techniques was done showing good agreement. Cavity number density and the resulting swelling were found to be suppressed by the injected interstitial effect in the vicinity of the ion induced damage peak. The region between 300 and 750 nm depth which excludes the injected interstitial effect was thus proposed for improved cavity swelling analysis. The swelling ratio in this region was found to be ~(0.86–1.02) × 10{sup − 2}%/dpa. In addition, ChemiSTEM characterization revealed radiation-induced segregation occurring throughout the irradiated region and precipitation of G-phase particles. Segregation of Ni to cavity surfaces was also observed and its possible synergistic influence on swelling was discussed.

36 MATERIALS SCIENCE↗

Ink-substrate interactions during 3D printing revealed by time-resolved coherent X-ray scattering

Additive printing techniques are regarded as revolutionary and versatile methods of advanced device manufacturing, stemming from the possibility to pattern materials on a custom-based approach and the potential to create novel microstructures and achieve new functionalities. Despite these advantages, the inherent anisotropy of the printing process is a source of property gradients within the printed materials, often associated with variable and/or poor performance. Up to date, the evolutionary pathways associated with printing have largely remained unaddressed, mainly owing to the difficulty to study the transformations induced in the material during processing. Time-resolved coherent X-ray scattering techniques, such as X-ray photon correlation spectroscopy, enable the in situ study of transient nanoscale and mesoscale states in a large variety of materials, including amorphous ones, by directly accessing the most relevant timescales and length scales of their nanoscale and mesoscale dynamics, self-assembly, and mesostructure evolution. In this work, we conduct in operando studies of continuous-flow direct writing with colloidal inks, focusing on how the ink formulation and ink-substrate interactions affect the processes that determine the macroscopic properties of the printed materials. We find fundamental differences in the ink structural relaxations emerging from the primary colloid properties (monodisperse versus aggregated colloids) and the substrates surface energy and mechanical properties. Our work helps to reveal and quantify the basic science governing the evolution of 3D-printed materials during processing, ultimately improving engineering criteria for the design of printable materials.

36 MATERIALS SCIENCE↗

Depth-resolved cathodoluminescence and surface photovoltage spectroscopies of gallium vacancies in β-Ga 2 O 3 with neutron irradiation and forming gas anneals

The gallium vacancy is one of the dominant native point defects in β-Ga 2 O 3 , one that, together with its complexes, can have a major effect on free carrier densities and transport in this wide bandgap semiconductor. We used a combination of depth-resolved cathodoluminescence spectroscopy and surface photovoltage spectroscopy to identify the optical and energy-level properties of these defects as well as how their defect densities and spatial distributions vary with neutron irradiation and temperature-dependent-forming gas anneals. These studies reveal optical signatures that align closely with theoretical energy-level predictions. Likewise, our optical techniques reveal variations in these defect densities that are consistent with hydrogen passivation of gallium vacancies as a function of temperature and depth from the free Ga 2 O 3 surface. These techniques can help guide the understanding and control of dominant native point defects in Ga 2 O 3 .

42 ENGINEERING↗

Analysis of atomic force microscopy data for surface characterization using fuzzy logic

In this paper we present a methodology to characterize surface nanostructures of thin films. The methodology identifies and isolates nanostructures using Atomic Force Microscopy (AFM) data and extracts quantitative information, such as their size and shape. The fuzzy logic based methodology relies on a Fuzzy Inference Engine (FIE) to classify the data points as being top, bottom, uphill, or downhill. The resulting data sets are then further processed to extract quantitative information about the nanostructures. In the present work we introduce a mechanism which can consistently distinguish crowded surfaces from those with sparsely distributed structures and present an omni-directional search technique to improve the structural recognition accuracy. In order to demonstrate the effectiveness of our approach we present a case study which uses our approach to quantitatively identify particle sizes of two specimens each with a unique gold nanoparticle size distribution. - Research Highlights: {yields} A Fuzzy logic analysis technique capable of characterizing AFM images of thin films. {yields} The technique is applicable to different surfaces regardless of their densities. {yields} Fuzzy logic technique does not require manual adjustment of the algorithm parameters. {yields} The technique can quantitatively capture differences between surfaces. {yields} This technique yields more realistic structure boundaries compared to other methods.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Precursor dependent nucleation and growth of ruthenium films during chemical vapor deposition

Nucleation and film growth characteristics are reported during chemical vapor deposition of Ru on SiO{sub 2} using triruthenium dodecacarbonyl [Ru{sub 3}(CO){sub 12}] and ruthenium bis(di-t-butylacetamidinate) dicarbonyl [Ru({sup t}Bu-Me-amd){sub 2}(CO){sub 2}]. Films grown from Ru{sub 3}(CO){sub 12} follow the three dimensional (3D) Volmer–Weber growth mode. In contrast, films grown from Ru({sup t}Bu-Me-amd){sub 2}(CO){sub 2} follow the pseudo-layer-by-layer growth mode with two dimensional wetting layer islands forming before 3D particle growth is observed on the islands. A relationship between free isolated hydroxyl [(Si-OH){sub i}] group density and Ru nucleation density is found for Ru{sub 3}(CO){sub 12} and is associated with (Si-OH){sub i} acting as the reaction sites for activation of Ru{sub 3}(CO){sub 12} and in turn generating an adjustable adatom concentration. Carbon monoxide and ammonia addition to the gas phase during film growth from Ru({sup t}Bu-Me-amd){sub 2}(CO){sub 2} lead to smoother films by inducing surface reconstructions during the 3D phase of pseudo-layer-by-layer growth; these gases also lead to films with lower resistivity and lower crystalline character.

42 ENGINEERING↗

Minimum critical masses of heterogeneous moderated plutonium and uranium metal systems and their practical application to operation limits - 14355

In criticality safety analysis it is important to recognize the significant differences in reactivity achieved when material transitions from the solid to solution regime. However, the intermediate area of mixed heterogeneous systems (i.e. collections of small pieces) has not been well characterized. To that end, a study has been completed to determine the effect of fissile material piece size/shape on minimum critical mass of a system. The study presented represents a calculation-based investigation of moderated arrays of fissionable material to expand on established plutonium and uranium solution curves of LA-10860 to add the heterogeneous regime between pure a solid and solution of fissionable material. The analysis performed consists of parametric studies utilizing the neutron transport code MCNP6 to calculate the critical mass of systems composed of moderated arrays of varying sizes of spheres, cubes, or elongated rods (height >> diameter). The boundary of the array is increased to find the critical mass for the particular piece geometry and fissile volume density. The different shapes were then compared at points with the same fissile volume density to demonstrate that the key relationship between varying piece shape is the surface area to volume ratio. The results show that as pieces get larger (i.e. more heterogeneous) the minimum critical mass starts to increase. This effect results from the moderation of neutrons becoming less and less effective due to increased self-shielding of larger individual pieces. For plutonium pieces at a surface area to volume ratio of < 13 the reactivity increase from additional neutron moderation can no longer overcome the reactivity decrease from the reduced core density (separation of material pieces). At this point the minimum critical mass is achieved when the plutonium is in a solid metal configuration. This effect is not noticed for uranium which responds much more quickly to moderation and thus almost any sized pieces will increase in reactivity when moderation is introduced. Summarizing the results of the calculation a surface area to volume ratio vs minimum critical mass curve is generated. The curve gives analysts a practical starting minimum critical mass in analysis of heterogeneous systems with known minimum material surface area to volume ratios. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fuel Cell Tech Team Meeting: Engineered Nano-scale Ceramic Supports for PEM Fuel Cells [Slides]

Catalyst support durability is currently a technical barrier for commercialization of polymer electrolyte membrane (PEM) fuel cells, especially for transportation applications. Degradation and corrosion of the conventional carbon supports leads to losses in active catalyst surface area and, consequently, reduced performance. As a result, the goal of this work is to develop support materials that interact strongly with Pt, yet sustain bulk-like catalytic activities with very highly dispersed particles. Ceramic materials that are prepared using conventional solid-state methods have large grain sizes and low surface areas that can only be minimally ameliorated through grinding and ball milling. Other synthesis routes to produce ceramic materials must be investigated and utilized in order to obtain desired surface areas. In this work, several different synthesis methods are being utilized to prepare electronically conductive ceramic boride, nitride, and oxide materials with high surface areas and have the potential for use as PEMFC catalyst supports. Polymer-assisted deposition (PAD) and aerosol-through plasma (A-T-P) torch are among several methods used to obtain ceramic materials with surface areas that are equal to, or exceed Vulcan XC-72R supports. Cubic Mo-based ceramic phases have been prepared with average XRD-determined crystallite sizes as low as 1.6 nm (from full profile, XRD fitting) and a BET surface area exceeding 200 m 2 /g. Additionally, black, sub-stoichiometric TiO 2-x , have been prepared with an average crystallite size in the 4 nm range and surface areas exceeding 250 m 2 /gr. Pt disposition using an incipient wetness approach produced materials with activity for hydrogen redox reactions and ORR. Cyclic voltammetry data will be shown for a variety of potential Pt/ceramic catalysts. Initial experiments indicate enhanced Pt metal-support interactions as well. Plane wave periodic density functional calculations (VASP) are being used to predict the thermodynamic and activation barriers for fundamental electrode processes occurring at platinum surfaces supported on thin films of the ceramic support materials. The results of this work will be used in order to optimize support properties.

08 HYDROGEN↗

Compact Heat Exchanger Design and Testing for Advanced Reactors and Advanced Power Cycles

The goal of the proposed research is to demonstrate the thermal hydraulic performance of innovative surface geometries in compact heat exchangers used as intermediate heat exchangers (IHXs) and recuperators for the supercritical carbon dioxide (s-CO 2 ) Brayton cycle. Printed-circuit heat exchangers (PCHEs) are the primary compact heat exchangers of interest. The overall objectives are: To develop optimized PCHE designs for different working fluid combinations including helium to s-CO 2 , liquid salt to s-CO 2 , sodium to s-CO 2 , and liquid salt to helium; To experimentally and numerically investigate thermal performance, thermal stress and failure mechanism of PCHEs under various transients; and To study diffusion bonding techniques for elevated-temperature alloys and examine post-test material integrity of the PCHEs. The project objectives were accomplished by defining and executing five different tasks corresponding to these specific objectives. The first task involved a thorough literature review and a selection of IHX candidates with different surface geometries as well as a summary of prototypic operational conditions. The second task involved optimization of PCHE design with numerical analyses of thermal-hydraulic performances and mechanical integrity. The subsequent task dealt with the development of testing facilities and engineering design of PCHE to be tested in s-CO 2 fluid conditions. The next task involved experimental investigation and validation of the thermal-hydraulic performances and thermal stress distribution of prototype PCHEs manufactured with particular surface geometries. The last task involved an investigation of diffusion bonding process and posttest destructive testing to validate mechanical design methods adopted in the design process. The experimental work utilized the two test facilities at The Ohio State University (OSU) including one existing High-Temperature Helium Test Facility (HTHF) and the newly developed s-CO 2 test loop (STL) facility and s-CO 2 test facility at University of Wisconsin – Madison (UW).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Studies on metal-dielectric plasmonic structures.

The interaction of light with nanostructured metal leads to a number of fascinating phenomena, including plasmon oscillations that can be harnessed for a variety of cutting-edge applications. Plasmon oscillation modes are the collective oscillation of free electrons in metals under incident light. Previously, surface plasmon modes have been used for communication, sensing, nonlinear optics and novel physics studies. In this report, we describe the scientific research completed on metal-dielectric plasmonic films accomplished during a multi-year Purdue Excellence in Science and Engineering Graduate Fellowship sponsored by Sandia National Laboratories. A variety of plasmonic structures, from random 2D metal-dielectric films to 3D composite metal-dielectric films, have been studied in this research for applications such as surface-enhanced Raman sensing, tunable superlenses with resolutions beyond the diffraction limit, enhanced molecular absorption, infrared obscurants, and other real-world applications.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Monticello Mill Tailings Site, Operable Unit lll, Annual Groundwater Report, May 2015 Through April 2016

This report provides the annual analysis of water quality restoration progress, cumulative through April 2016, for Operable Unit (OU) III, surface water and groundwater, of the U.S. Department of Energy (DOE) Office of Legacy Management (LM) Monticello Mill Tailings Site (MMTS). The MMTS is a Comprehensive Environmental Response, Compensation, and Liability Act National Priorities List site located in and near the city of Monticello, San Juan County, Utah. MMTS comprises the 110-acre site of a former uranium- and vanadium-ore-processing mill (mill site) and 1700 acres of surrounding private and municipal property. Milling operations generated 2.5 million cubic yards of waste (tailings) from 1942 to 1960. The tailings were impounded at four locations on the mill site. Inorganic constituents in the tailings drained from the impoundments to contaminate local surface water (Montezuma Creek) and groundwater in the underlying alluvial aquifer. Mill tailings dispersed by wind and water also contaminated properties surrounding and downstream of the mill site. Remedial actions to remove and isolate radiologically contaminated soil, sediment, and debris from the former mill site, Operable Unit I (OU I), and surrounding properties (OU II) were completed in 1999 with the encapsulation of the wastes in an engineered repository located on DOE property 1 mile south of the former mill site. This effectively removed the primary source of groundwater contamination; however, contamination of groundwater and surface water remains within OU III at levels that exceed water quality protection standards. Uranium is the primary contaminant of concern (COC). LM implemented monitored natural attenuation with institutional controls as the OU III remedy in 2004. Because groundwater restoration proceeded more slowly than expected and did not meet performance criteria established in the OU III Record of Decision (June 2004), LM implemented a contingency action in 2009 by an Explanation of Significant Difference to include a pump-and­ treat system using a single extraction well and treatment by zero-valent iron (ex situ treatment system). The contingency action was optimized in 2015 with the installation of8 extraction wells and 16 monitoring wells in a focused area of the aquifer, the area of attainment (AOA). Contaminated water is treated by solar evaporation at an existing facility at the LM repository.

54 ENVIRONMENTAL SCIENCES↗

Pore radius fine tuning of a silica matrix (MCM-41) based on the synthesis of alumina nanolayers with different thicknesses by atomic layer deposition

The authors investigated a new approach to modify the surface of the mesoporous silica matrix MCM-41. This approach is based on manipulating the chemical composition of the porous surface layer and also on fine tuning the pore radius by applying the atomic layer deposition (ALD) technique. The synthesis of alumina nanolayers was performed on the planar and the porous matrix (MCM-41) by the ALD technique using aluminum tri-sec-butoxide and water as precursors. The authors show that one cycle on silicon, using aluminum tri-sec-butoxide and water as precursors, results in a 1–1.2 Å increase in alumina nanolayer thickness. This is comparable to the increase in thickness per cycle for other precursors such as trimethylaluminum and aluminum chloride. The authors show that the synthesis of an Al{sub 2}O{sub 3} nanolayer on the pore surface of the mesoporous silica matrix MCM-41 by the ALD technique results in a regular change in the porous structure of the samples. The specific porosity (ml/g) of the MCM-41 was 0.95 and that of MCM-41 after 5 ALD cycles was 0.39. The pore diameter (nm) of MCM-41 was 3.3 and that of MCM-41 after 5 ALD cycles was 2.3.

42 ENGINEERING↗

Evaluation of electropolished stainless steel electrodes for use in DC high voltage photoelectron guns

DC high voltage photoelectron guns are used to produce polarized electron beams for accelerator-based nuclear and high-energy physics research. Low-level field emission (∼nA) from the cathode electrode degrades the vacuum within the photogun and reduces the photoelectron yield of the delicate GaAs-based photocathode used to produce the electron beams. High-level field emission (>μA) can cause significant damage the photogun. To minimize field emission, stainless steel electrodes are typically diamond-paste polished, a labor-intensive process often yielding field emission performance with a high degree of variability, sample to sample. As an alternative approach and as comparative study, the performance of electrodes electropolished by conventional commercially available methods is presented. Our observations indicate the electropolished electrodes exhibited less field emission upon the initial application of high voltage, but showed less improvement with gas conditioning compared to the diamond-paste polished electrodes. In contrast, the diamond-paste polished electrodes responded favorably to gas conditioning, and ultimately reached higher voltages and field strengths without field emission, compared to electrodes that were only electropolished. The best performing electrode was one that was both diamond-paste polished and electropolished, reaching a field strength of 18.7 MV/m while generating less than 100 pA of field emission. The authors speculate that the combined processes were the most effective at reducing both large and small scale topography. However, surface science evaluation indicates topography cannot be the only relevant parameter when it comes to predicting field emission performance.

42 ENGINEERING↗

A detailed reaction mechanism for oxidative coupling of methane over Mn/Na 2 WO 4 /SiO 2 catalyst for non-isothermal conditions

Direct production of ethylene from natural gas or other methane sources has proven to be challenging from catalytic, process design and economic perspectives, with no reports of a commercially viable process to date. Understanding of the underlying non-ideal homogeneous and heterogeneous reactions involved could lead to success, enabling utilization of vast natural gas resources as a replacement for petrochemicals. In this regards, an improved reaction mechanism and computational model, validated experimentally, for oxidative coupling of methane (OCM) over a Mn/Na 2 WO 4 /SiO 2 catalyst is developed, taking into account the non-isothermal behavior exhibited by the gas and surface reactions. The reaction mechanism involves detailed gas-phase and surface elementary steps to describe the OCM chemistry and employing a reduced model for computational efficiency. Our model uses laboratory-scale packed-bed reactor experiments for kinetic mechanism development. The modeling and simulation is particularly focused on a one-dimensional packed-bed reactor. The kinetic model is validated over a wide range of experimental conditions. The model-predicted results and their comparisons with the experimental data are presented wide temperature ranges and methane-to-oxygen feed ratios under adiabatic reactor conditions. The kinetic model is first of its kind in which non-isothermal OCM kinetic behavior is captured using detailed gas-phase and heterogeneous reaction kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-situ fatigue monitoring procedure using nonlinear ultrasonic surface waves considering the nonlinear effects in the measurement system

Second harmonic generation using nonlinear ultrasonic waves have been shown to be an early indicator of possible fatigue damage in nuclear power plant components. This technique relies on measuring amplitudes, making it highly susceptible to variations in transducer coupling and instrumentation. This paper proposes an experimental procedure for in-situ surface wave nonlinear ultrasound measurements on specimen with permanently mounted transducers under high cycle fatigue loading without interrupting the experiment. It allows continuous monitoring and minimizes variation due to transducer coupling. Moreover, relations describing the effects of the measurement system nonlinearity including the effects of the material transfer function on the measured nonlinearity parameter are derived. An in-situ high cycle fatigue test was conducted using two 304 stainless steel specimens with two different excitation frequencies. A comprehensive analysis of the nonlinear sources, which result in variations in the measured nonlinearity parameters, was performed and the effects of the system nonlinearities are explained and identified. In both specimens, monotonic trend was observed in nonlinear parameter when the value of fundamental amplitude was not changing.

42 ENGINEERING↗