Synthesis of SrTiO 3 and Al-doped SrTiO 3 via the deep eutectic solvent route
SrTiO 3 and aluminum-doped SrTiO 3 are synthesized by calcination of metal salts dissolved in a deep eutectic solvent (DES) without any post-synthesis treatment.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
SrTiO 3 and aluminum-doped SrTiO 3 are synthesized by calcination of metal salts dissolved in a deep eutectic solvent (DES) without any post-synthesis treatment.
We perform spectroscopic surface characterization on mesoporous ceria (CeO 2 ) under exposure of sarin gas, also known as GB. We find mesoporous CeO 2 displays extraordinary reactivity towards GB dissociation under high vacuum. The spectroscopic results combined with density functional theory (DFT) calculations suggest that the cleavage of the P–F and P–OR bonds are both possible pathways for GB to dissociate on the CeO 2 surfaces. The modeling reveals differences in dissociation pathways of GB on the crystallographic (111)- and (110)-surfaces of ceria. Here we also report some dissociation of GB on mesoporous CeO 2 under ambient conditions. The finding that mesoporous CeO 2 can degrade GB under mild conditions is encouraging and implies the strong potential of ceria-based materials to be applied in combating chemical warfare agents related to the GB series.
This paper investigates efficiency of specially designed atomizer used to spray water and cavitate microbubbles in water flow. Surface cleaning system was used to clean machined (grinded) aluminum surface from abrasive particles. It is established that cleaning efficiency depends on diameter of the diffuser, water pressure and distance between nozzle and metal surface. It is obtained that the best cleaning efficiency (100%) is achieved at pressure 36 bar, when diameter of diffuser is 0.4 mm and distance between nozzle and surface is 1 mm. It is also established that satisfactory cleaning efficiency (80%) is achieved not only when atomizer is placed closer to metal surface, but also at larger (120 mm) distances.
Deposition of nanostructured coatings on the basis of Zr-Y-O was implemented by the pulse magnetron methods. Structural-phase states and morphology of the nanostructured coatings were investigated by TEM, SEM and the high-temperature X-ray method. The method of the high-temperature X-ray diffraction revealed the presence of reversible phase transition of the tetragonal phase to the monoclinic phase, which can ensure stress relaxation and closure of surface cracks.
Crystallographic orientation plays a central role in determining transport properties in correlated oxides with low-hysteresis metal–insulator transitions. Here, V3O5 thin films were grown on Al2O3 (0001) and their crystallographic registry was evaluated using x-ray diffraction and cross-sectional transmission electron microscopy. θ–2θ measurements show a single out-of-plane orientation defined by the (202) reflection. Azimuthal φ-scans of the V3O5 (310) reflection exhibit twelve discrete maxima over 360°, indicating a finite set of in-plane orientations imposed by the substrate symmetry. High-resolution TEM and fast Fourier transform analysis confirm crystallographic coherence at the film–substrate interface. The electrical conductivity exhibits a metal–insulator transition at TMIT ≈ 423 K with no measurable thermal hysteresis and a total change of ~1.6 orders of magnitude between 300 and 480 K. These results establish crystallographic registry in epitaxial V3O5 thin films and provide a structurally well-defined system for future studies of orientation-dependent transport.\r\nT
Accurate knowledge of the atomistic transition pathways in materials and material surfaces is crucial for many material science problems. However, conventional simulation techniques used to find these transitions are extremely computationally intensive. Even with large-scale, accelerated material simulations, the computational cost constrains the applicable domain in practice. Machine learning models, with the potential to learn the complex emergent behaviors governing atomistic transitions as a fast surrogate model, have great promise to predict transitions with a vastly reduced computational cost. Here, we demonstrate how transformers can be trained to predict atomistic transitions in nano-clusters. We show how we evaluate physical validity of the predictions and how a multitude of additional, different microstates can be generated by slightly varying the data provided to the model.
Sb is topologically non-trivial and semi-metallic, but differs from many topological semi-metals because of its continuous band gap. By measuring its (112) surface using angle- and spin-resolved photoemission spectroscopy, Sb(112) was shown to have 1D spin-polarised surface states resembling those on vicinal Bi surfaces and many topological insulators and topological semi-metals. The shape and spin-polarisation of the measured features and the calculated bands agreed. However, the measured features had a slightly steeper energy dispersion and different Fermi-momenta than the calculated bands. Both theoretical and experimental methods were necessary when determining the topology of Sb(112). The presence of projected bulk states near the Fermi-level and varying surface localisation of the electronic states meant it was challenging to deduce the topology of Sb(112) from the number of bands crossing the Fermi-level or a continuous contour in the bulk band gap. Ultimately, the calculations and measurements suggest that there are topological surface states on the Sb(112) surface.
Doped strontium titanate becomes superconducting at a density as low as n = 5 × 10 17 cm -3 , where the Fermi energy is orders of magnitude smaller than the longitudinal-optical-phonon frequencies. In this limit, the only optical mode with a frequency which is smaller than the Fermi energy is the plasmon. In contrast to metals, the interaction strength is weak due to screening by the crystal, which allows the construction of a controllable theory of plasmon superconductivity. We show that plasma mediated pairing alone can account for the observed transition temperatures only if the dielectric screening by the crystal is reduced in the slightly doped samples compared with the insulating ones. We also discuss unique features of the plasmon mechanism, which appear in the tunneling density of states above the gap.
Explore the source record for details and available documents.
Nanoparticles of various types are of increasing research and technological importance in biological and other applications. Difficulties in the production and delivery of nanoparticles with consistent and well defined properties appear in many forms and have a variety of causes. Among several issues are those associated with incomplete information about the history of particles involved in research studies including the synthesis method, sample history after synthesis including time and nature of storage and the detailed nature of any sample processing or modification. In addition, the tendency of particles to change with time or environmental condition suggests that the time between analysis and application is important and some type of consistency or verification process can be important. The essential history of a set of particles can be identified as provenance information tells the origin or source of a batch of nano-objects along with information related to handling and any changes that may have taken place since it was originated. A record of sample provenance information for a set of particles can play a useful role in identifying some of the sources and decreasing the extent of particle variability and the observed lack of reproducibility observed by many researchers.
SPPARKS is a kinetic Monte Carlo simulator which implements kinetic and Metropolis Monte Carlo solvers in a general way so that they can be hooked to applications of various kinds. Specific applications are implemented in SPPARKS as physical models which generate events (e.g. a diffusive hop or chemical reaction) and execute them one-by-one. Applications can run in parallel so long as the simulation domain can be partitioned spatially so that multiple events can be invoked simultaneously. SPPARKS is used to model various kinds of mesoscale materials science scenarios such as grain growth, surface deposition and growth, and reaction kinetics. It can also be used to develop new Monte Carlo models that hook to the existing solver and parallel infrastructure provided by the code.
The Spotter is a low-cost, real-time, solar-powered wave measurement buoy that was recently developed by Spoondrift Technologies, Inc. (Spoondrift). To evaluate the data quality of the Spotter device, we performed a series of validation experiments that included comparisons between Spotter-derived motions and prescribed wave motions (monochromatic and random waves) on a custom-built, motion-controlled validation stand and simultaneous in-water measurements using a conventional wave measurement buoy, the Datawell DWR-G4 (Datawell). Spotter evaluations included time-domain validation (i.e., wave by wave) and comparisons of wave spectra, directional moments, and bulk statistical parameters such as significant wave height, peak period, mean wave direction, and directional spread. Spotter wave measurements show excellent fidelity and lend a high degree of confidence in data quality. Overall, Spotter-derived bulk statistical parameters were within 10% of respective Datawell-derived quantities. The Spotter’s low cost and compact form factor enabled unique field deployments of multiple wave measurement buoys for direct measurements of wave characteristics such as ocean wave decorrelation length scales, wave speed, and directional spread. Wave decorrelation lengths were found to be inversely proportional to the width of the spectrum, and wave speeds compared well against linear wave theory.
Not Available
This dataset captures the difference in concentration over the difference in discharge across upper and lower reaches of the East River watershed for 2015 and 2016 water years. The East River is part of the Watershed Function Scientific Focus Area (WFSFA) located in the Upper Colorado River Basin, United States. Herein, the upper reach is defined as the segment between EAQ (East Above Quigley) and EBC (East Below Copper), and the lower reach is defined as the segment between EBC and PH (Pump House). The overall purpose of the dataset is to provide a better accounting of the gains, losses or fractional solute turnover between sampling stations. Compiled data for the two segments (EAQ to EBC and EBC to PH) are provided in two Excel files, and the same data are provided in csv format in the corresponding zip files.
This data package is associated with the publication “Dissolved Organic Matter Functional Trait Relationships are Conserved Across Rivers” submitted to PNAS (Stegen et al., 2023). The study aims to understand large-scale spatial structure of the dissolved organic matter (DOM) thermodynamic traits and inter-trait relationships by investigating (1) river water and sediments collected along 97 rivers spanning 3 continents and (2) coastal sediment collected from fresh and saline locations in Pacific and Gulf/Atlantic rivers. Sediment extracts and water samples were analyzed using ultrahigh resolution Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). This dataset is comprised of three folders (1) Coastal, (2) WHONDR_S19S, and (3) Data_Dictionaries. Coastal contains (1) a subfolder with processed FTICR-MS data as csv files and sample collection metadata, (2) a subfolder with R scripts used to process the data and create associated figures, (3) a subfolder with the raw, unprocessed FTICR-MS data as .xml files, and (4) a readme file with more information about the dataset and instructions for using Formularity (https://omics.pnl.gov/software/formularity). WHONDRS_S19S contains (1) a csv file with processed FTICR data, (2) a csv with sample collection metadata, (3) a csv with sample geospatial data, (4) a csv with simulated lambda model outputs, (5) a subfolder with R scripts used to process the data and create associated figures, and (6) a readme file with more information regarding WHONDRS raw FTICR data and processing scripts. Data_Dictionaries contains data dictionaries for each csv file in the data package. The 97 global river corridors were part of a WHONDRS (https://whondrs.pnnl.gov) study. The raw, unprocessed FTICR-MS data with additional data can be found at doi:10.15485/1729719 for sediments and doi:10.15485/1603775 for water. This data package contains the processed data used in the associated manuscript. The coastal data has not been previously published, and this data package contains both the raw and processed data. Version 3 of this data package published February 2023 includes updates to the title of the manuscript, additional data and data dictionary and updated scripts linked to new analysis.
This dataset supports a broader study examining drivers of organic matter chemistry in variably inundated hyporheic zone sediments and further linking that chemistry to biogeochemical rates. The dataset provides physical and chemical sediment data collected from 48 rivers across North America. There are related data that will be published, including surficial sediment temperature time series that can be used to infer the dynamics of inundation prior to the collection of sediments. This dataset is comprised of two folders: (1) ECA2_Sediment and (2) ECA2_SitePhotos. The ECA2_Sediment folder contains: (1) file-level metadata; (2) data dictionary; (3) field metadata; (4) non-purgeable organic carbon (NPOC), total nitrogen (TN), and sediment moisture; (5) sediment sampling protocol, (6) readme, and (7) folder of high resolution characterization of organic matter from sediment extracts via 12 Tesla Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) through the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory). The FTICR-MS files are .xml, and the data package includes instructions for using Formularity (https://omics.pnl.gov/software/formularity) and an R script to process the data based on the user's specific needs. All other files are .csv, .txt, or .pdf. The ECA2_SitePhotos folder contains a readme and site photographs taken in the field. All files are .txt or .jpg.
Pond B at Savannah River Site (SRS, South Carolina) is a monomictic reservoir that received SRS R reactor cooling water from 1961–1964. Previous studies conducted between the 1980s–1990s on the water column and sediments of Pond B measured trace amounts of Pu (33 MBq 238Pu and 430 MBq 239,240Pu), 241Am, and 137Cs. Since then, the pond has been relatively isolated and the radionuclide concentrations have not been monitored over time. Herein, about 30 years after the last publication on Pond B, we are re-evaluating the geochemistry and radionuclide distribution within Pond B at five locations along a horizontal transect from the inlet to outlet. In addition, we are conducting the first analysis of the microbial community composition. This data package consists of water column measurements (1) using a multi-probe sonde, (2) plutonium isotopes and total concentrations, (3) total organic/inorganic carbon concentrations, (4) trace metals and major ions concentrations, and (6) microbial community composition. Sediment measurements include (1) plutonium isotopes and total concentrations and (2) microbial community composition.For sediment core and porewater, please see other Pond B data package (ess-dive-60d2352a4495472-20200615T203925174).The data in this package will be submitted for peer review in 2023.
This dataset provides geospatial information, metadata, and maps for the Pacific Northwest National Laboratory (PNNL) River Corridor Science Focus Area (RC-SFA; https://www.pnnl.gov/projects/river-corridor) sites. The RC-SFA works to transform understanding of spatial and temporal dynamics in river corridor hydrobiogeochemical functions from molecular reaction to watershed and basin scales. The knowledge we gain is used to formulate and test hypotheses and to improve mechanistic representation of river corridor processes and their response to disturbances in multiscale models of integrated hydrobiogeochemical function. The data provided includes Site ID, latitude, longitude, stream name, and common ID (COMID) for sites used across the RC-SFA. The COMID can be used to find and download data from NHDPlus (https://www.epa.gov/waterdata/nhdplus-national-hydrography-dataset-plus) and other platforms. The sites included are non-exhaustive. Sites (including past sites) will be added to this data package in the future. Data generated from the RC SFA can be accessed at https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA. This data package was originally published in April 2023. It was updated in June 2023 (v2; modified files), December 2023 (v3; modified files), January 2025 (v4; modified files), and December 2025 (v5; modified files). See the change history section in the readme for more details. This dataset is comprised of one main data folder. The data folder consists of (1) file-level metadata; (2) data dictionary; (3) readme; (4) methods codes; (5) geospatial information for all RC SFA sites including International Generic Sample Number (IGSN); (6) maps of all sites and sites in Washington State, USA; and (7) a subfolder with the shapefile of all sites. All files are .csv, .pdf, .shp, .cpg, .dbf, .prj, .qmd, or .shx. We thank the Confederated Tribes and Bands of the Yakama Nation for access to field locations where some data were collected in Washington state. We also thank the Yakama Nation Tribal Council and Yakama Nation Fisheries for working with us to facilitate sample collection and optimization of data usage according to their values and worldview.