Search NASA⌕ Search

SEARCH · Search NASA

Results for “test correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

RECQ1 A159C Polymorphism Is Associated With Overall Survival of Patients With Resected Pancreatic Cancer: A Replication Study in NRG Oncology Radiation Therapy Oncology Group 9704

Purpose: To confirm whether a previously observed association between RECQ1 A159C variant and clinical outcome of resectable pancreatic cancer patients treated with preoperative chemoradiation is reproducible in another patient population prospectively treated with postoperative chemoradiation. Methods and Materials: Patients were selected, according to tissue availability, from eligible patients with resected pancreatic cancer who were enrolled on the NRG Oncology Radiation Therapy Oncology Group 9704 trial of 5-fluorouacil (5-FU)-based chemoradiation preceded and followed by 5-FU or gemcitabine. Deoxyribonucleic acid was extracted from paraffin-embedded tissue sections, and genotype was determined using the Taqman method. The correlation between genotype and overall survival was analyzed using a Kaplan-Meier plot, log-rank test, and multivariate Cox proportional hazards models. Results: In the 154 of the study's 451 eligible patients with evaluable tissue, genotype distribution followed Hardy-Weinberg equilibrium (ie, 37% had genotype AA, 43% AC, and 20% CC). The RECQ1 variant AC/CC genotype carriers were associated with being node positive compared with the AA carrier (P=.03). The median survival times (95% confidence interval [CI]) for AA, AC, and CC carriers were 20.6 (16.3-26.1), 18.8 (14.2-21.6), and 14.2 (10.3-21.0) months, respectively. On multivariate analysis, patients with the AC/CC genotypes were associated with worse survival than patients with the AA genotype (hazard ratio [HR] 1.54, 95% CI 1.07-2.23, P=.022). This result seemed slightly stronger for patients on the 5-FU arm (n=82) (HR 1.64, 95% CI 0.99-2.70, P=.055) than for patients on the gemcitabine arm (n=72, HR 1.46, 95% CI 0.81-2.63, P=.21). Conclusions: Results of this study suggest that the RECQ1 A159C genotype may be a prognostic or predictive factor for resectable pancreatic cancer patients who are treated with adjuvant 5-FU before and after 5-FU-based chemoradiation. Further study is needed in patients treated with gemcitabine to determine whether an association exists.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Implementation of metal-friendly EAM/FS-type semi-empirical potentials in HOOMD-blue: A GPU-accelerated molecular dynamics software

We present an implementation of EAM and FS interatomic potentials, which are widely used in simulating metallic systems, in HOOMD-blue, a software designed to perform classical molecular dynamics simulations using GPU accelerations. We first discuss the details of our implementation and then report extensive benchmark tests. We demonstrate that single-precision floating point operations efficiently implemented on GPUs can produce sufficient accuracy when compared against double-precision codes, as demonstrated in test simulations of calculations of the glass-transition temperature of Cu 64.5 Zr 35.5 , and pair correlation function of liquid Ni 3 Al. Our code scales well with the size of the simulating system on NVIDIA Tesla M40 and P100 GPUs. Compared with another popular software LAMMPS running on 32 cores of AMD Opteron 6220 processors, the GPU/CPU performance ratio can reach as high as 4.6. In conclusion, the source code can be accessed through the HOOMD-blue web page for free by any interested user.

36 MATERIALS SCIENCE↗

Degradation of impact toughness in cast stainless steels during long-term thermal aging

Cast austenitic stainless steels (CASSs) have been extensively used for the large components of nuclear reactor primary coolant systems. Since the cast steels inevitably contain degradable metastable phases and replacement of the large coolant system components is impractical, the thermal embrittlement of CASS components has been a serious concern in the extended-term operation of nuclear power plants. This study aimed to systematically measure and analyze the effect of long-term thermal aging on the Charpy impact toughness to provide a comprehensive understanding of thermal degradation behavior and a practical aging model to predict the degree of thermal degradation in the cast stainless steels. Additionally, the materials tested in the research include eight CASS alloys (two CF3s, one CF3M, three CF8s, and two CF8Ms) and two reference wrought materials (304L and 316L), in which the nominal δ-ferrite content ranges from ~2% to 33%. These stainless steels have been thermally aged at two light water reactor (LWR) temperatures (290 and 330 °C) and at two accelerated-aging temperatures (360 and 400 °C) for up to 30,000 h; these include both under-aged and over-aged conditions relative to the extended service lifetime (80 years). Charpy impact testing was performed for aged and non-aged specimens, and the impact (absorbed) energy parameters were correlated with a new aging parameter (A). Both the reduction of impact fracture toughness and the shift of ductile-brittle transition temperature were strongly dependent on the δ-ferrite content and degree of thermal aging. A linear relationship was found between the increasing rate of the index transition temperature T 41J and aging parameter A; base on which an empirical model was proposed for prediction of the transition temperature as a simple function of the aging parameter (A) and δ-ferrite content (F). Finally, the critical aging parameter for embrittlement (AC) was evaluated and compared with the existing δ-ferrite content criteria.

36 MATERIALS SCIENCE↗

Towards an integrated experimental and computational framework for large-scale metal additive manufacturing

In this work using the Metal Big Area Additive Manufacturing (MBAAM) system, a thin steel wall was manufactured from a low carbon steel wire. The wall was then characterized comprehensively by high-throughput high-energy X-ray diffraction (HEXRD), electron backscatter diffraction (EBSD), and in-situ HEXRD tensile tests. With the predicted temperature histories from the finite element-based additive manufacturing process simulations, the correlations between processing parameters, microstructure, and properties were established. The correlation between the final microstructure with the predicted temperature history is well explained with the material's continuous cooling transformation (CCT) diagram calculated based on the composition of the low carbon steel wire. The final microstructure is dependent on the cooling rate during austenite to ferrite/bainite transformation during initial cooling and the subsequent reheating cycles. Fast cooling rate resulted in small ferrite grain size and fine bainite structure at the location closest to the base plate. Slower cooling rate at the side wall location and repeated reheating cycles to the ferrite-pearlite regions resulted in all allotriomorphic (equiaxed) ferrite with medium grain size with small amount of pearlite. With no reheating cycles, the top location has the slowest cooling rate and a large grained allotriomorphic ferrite and bainitic structures. The measured mechanical strength is then related to the microstructural feature size (grain or lath size) observed in those locations. Thus, a good correlation is found between the mechanical properties, microstructure features and the temperature history at various locations of the printed wall.

36 MATERIALS SCIENCE↗

Results from the CBC3 readout ASIC for CMS 2S-modules

The CBC3 is the latest version of the CMS Binary Chip for readout of the outer radial region of the upgraded CMS Tracker at the High Luminosity LHC. This 254-channel, 130 nm CMOS ASIC is designed to be bump-bonded to a substrate to which sensors will be wire-bonded. It will instrument double-layer 2S-modules, containing two overlaid silicon microstrip sensors, aligned with a parallel orientation. On-chip logic identifies Level-1 trigger primitives from high transverse-momentum tracks by selecting correlated clusters in the two sensors. The CBC3 was delivered in late 2016; wafer probing and performance tests have been carried out. Several prototype modules using the CBC3 have been produced and tested in the lab and in different beams. The results show that the CBC3 satisfies CMS requirements and only small corrections are needed for the final version of the chip for production.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Role of protein haptenation in triggering maturation events in the dendritic cell surrogate cell line THP-1

Dendritic cell (DC) maturation in response to contact sensitizers is a crucial step in the induction of sensitization reactions; however the underlying mechanism of activation remains unknown. To test whether the extent of protein haptenation is a determinant in DC maturation, we tested the effect of five dinitrophenyl (DNP) analogues of different reactivity, on maturation markers in the cell line, THP-1. The potencies of the test compounds in upregulating CD54 levels, inducing IL-8 release and triggering p38 MAPK phosphorylation did not correlate with their ability to deplete intracellular glutathione (GSH) levels or cause cell toxicity. However, the compounds' potency at inducing p38 phosphorylation was significantly associated with the amount of intracellular protein adducts formed (p < 0.05). Inhibition experiments show that, at least for DNFB, p38 MAP kinase signalling controls compound-specific changes in CD54 expression and IL-8 release. 2D-PAGE analysis revealed that all the DNP analogues appeared to bind similar proteins. The analogues failed to activate NFkB, however, they activated Nrf2, which was used as a marker of oxidative stress. Neither GSH depletion, by use of buthionine sulfoximine, nor treatment with the strongly lysine-reactive hapten penicillin elicited maturation. We conclude that protein haptenation, probably through reactive cysteine residues may be a trigger for maturation events in this in vitro model and that p38 activation may be a discriminatory marker for the classification of potency of chemical sensitizers.

60 APPLIED LIFE SCIENCES↗

Dysregulation of protein degradation pathways may mediate the liver injury and phospholipidosis associated with a cationic amphiphilic antibiotic drug

A large number of antibiotics are known to cause drug-induced liver injury in the clinic; however, interpreting clinical risk is not straightforward owing to a lack of predictivity of the toxicity by standard preclinical species and a poor understanding of the mechanisms of toxicity. An example is PF-04287881, a novel ketolide antibiotic that caused elevations in liver function tests in Phase I clinical studies. In this study, a mouse diversity panel (MDP), comprised of 34 genetically diverse, inbred mouse strains, was utilized to model the toxicity observed with PF-04287881 treatment and investigate potential mechanisms that may mediate the liver response. Significant elevations in serum alanine aminotransferase (ALT) levels in PF-04287881-treated animals relative to vehicle-treated controls were observed in the majority (88%) of strains tested following a seven day exposure. The average fold elevation in ALT varied by genetic background and correlated with microscopic findings of hepatocellular hypertrophy, hepatocellular single cell necrosis, and Kupffer cell vacuolation (confirmed as phospholipidosis) in the liver. Global liver mRNA expression was evaluated in a subset of four strains to identify transcript and pathway differences that distinguish susceptible mice from resistant mice in the context of PF-04287881 treatment. The protein ubiquitination pathway was highly enriched among genes associated with PF-04287881-induced hepatocellular necrosis. Expression changes associated with PF-04287881-induced phospholipidosis included genes involved in drug transport, phospholipid metabolism, and lysosomal function. The findings suggest that perturbations in genes involved in protein degradation leading to accumulation of oxidized proteins may mediate the liver injury induced by this drug. - Highlights: • Identified susceptible and resistant mouse strains to liver injury induced by a CAD • Liver injury characterized by single cell necrosis, and phospholipidosis • Decreased gene expression associated with protein ubiquitination in sensitive mice • Altered protein ubiquitination may cause oxidized protein accumulation in the liver.

60 APPLIED LIFE SCIENCES↗

Concerted Proton–Electron Transfer Minimizes Substituent Effects on Adsorbed Phthalocyanine Electrocatalysis

Molecularly modified electrodes (MMEs) are potent electrocatalysts, but few principles exist for their rational design. Electrocatalysis by soluble molecules depends strongly on substituents that tune the catalyst redox potential (E 1/2 ), but it is unclear if this parameter similarly impacts MME catalysis. Herein, we employ the hydrogen evolution reaction (HER) as a test case for comparing carbon-adsorbed cobalt phthalocyanine (CoPc/C) and cobalt hexadecafluoro-phthalocyanine (CoFPc/C). By correlating HER activity and voltammetric data to total Co surface concentration across a wide range of catalyst loadings, we find that only 5–25% of adsorbed Co sites contribute to the Co(II/I) redox wave and that this subpopulation poorly correlates with catalytic activity. Instead, in the low-loading limit, catalytic activity correlates linearly with the majority Co(II/I)-silent Co population, revealing per-site turnover frequency (TOF) values for HER. Despite a 230 mV difference in Co(II/I) redox potentials, CoPc/C and CoFPc/C display TOF values differing by less than a factor of 3 when compared over a wide potential range. Mechanistic studies point to an inner-sphere concerted proton–electron transfer step as rate-determining, suggesting that the Co–H bond dissociation free energy (BDFE) rather than the Co(II/I) E 1/2 is thermodynamically relevant. Computational studies indicate that the fluoro-substituents lead to compensatory changes in Co(II/I) E 1/2 and Co(I) basicity, leaving the Co–H BDFE largely unchanged between CoPc and CoFPc and thereby manifesting in similar catalytic rates. Furthermore, these results highlight the limited effect of E 1/2 -tuning on MME catalytic activity and motivate the development of methods to directly alter active site–substrate BDFE.

Catalysts↗

Mechanism of the Delithiation/Lithiation Process in LiFe 0.4 Mn 0.6 PO 4 : in Situ and ex Situ Investigations on Long-Range and Local Structures

LiFe 0.4 Mn 0.6 PO 4 olivine was prepared by a sol–gel route, using citric acid as a chelating agent and NH 4 H 2 PO 4 as a phosphorus source. Sucrose was used as the source for the carbon-coating of the particles. The correlation between the physicochemical and the electrochemical properties of this positive electrode material was explored. The electrochemical tests showed an initial discharge capacity of 121 mAh/g at a C/20 rate with a good reversibility of the lithiation/delithiation reactions. In situ XRD on LiFe 0.4 Mn 0.6 PO 4 reveals the occurrence of new phases upon cycling, which disappeared again at the end of discharge. The single phase observed after one complete cycle is identical to the pristine one. In situ XAS spectroscopy in combination with 57 Fe Mössbauer and 7 Li NMR spectroscopy were used to investigate the changes in the local structure and the oxidation states of the transition metals and thus to complete the overall characterization of the lithiation/delithiation mechanism. All findings reveal a high reversibility of the reactions in this electrode material.

36 MATERIALS SCIENCE↗

Three‐Dimensional Permeability Inversion Using Convolutional Neural Networks and Positron Emission Tomography

Abstract Quantification of heterogeneous multiscale permeability in geologic porous media is key for understanding and predicting flow and transport processes in the subsurface. Recent utilization of in situ imaging, specifically positron emission tomography (PET), enables the measurement of three‐dimensional (3‐D) time‐lapse radiotracer solute transport in geologic media. However, accurate and computationally efficient characterization of the permeability distribution that controls the solute transport process remains challenging. Leveraging the relationship between local permeability variation and solute advection behavior, an encoder‐decoder based convolutional neural network (CNN) is implemented as a permeability inversion scheme using a single PET scan of a radiotracer pulse injection experiment as input. The CNN can accurately capture the 3‐D spatial correlation between the permeability and the radiotracer solute arrival time difference maps in geologic cores. We first test the inversion accuracy using synthetic test datasets and then test the accuracy on a suite of experimental PET imaging datasets acquired on four different geologic cores. The network‐predicted permeability maps from the geologic cores are used to parameterize forward numerical models that are directly compared with the experimental PET imaging data. The results indicate that a single trained network can generate robust 3‐D permeability inversion maps in seconds. Numerical models parameterized with these permeability maps closely capture the experimentally observed solute arrival time behavior. This work provides an unprecedented approach for efficiently characterizing multiscale permeability heterogeneity in complex geologic samples.

54 ENVIRONMENTAL SCIENCES↗

Correlating the Morphological Changes to Electrochemical Performance During Carbon Corrosion in Polymer Electrolyte Fuel Cells

A mechanistic understanding of carbon corrosion in polymer electrolyte fuel cells (PEFCs) is required to design durable catalyst layers. Uncontrolled startup and shutdown of PEFCs cause electrochemical oxidation of carbon, which leads to several degradation phenomena, such as loss in electrochemical surface area (ECSA), pore structure collapse or increase in mass transport resistance. In this study, the chronology of morphological changes in the cathode catalyst layer due to carbon corrosion was identified and correlated with electrochemical performance degradation. PEFCs were subjected to the Department of Energy carbon corrosion accelerated stress test (AST) protocol. The study revealed two phases: in the initial phase (~500 AST cycles), amorphous carbon in contact with Pt nanoparticles oxidized fast. Rapid carbon loss and catalyst layer thinning occurred, but pore structure did not change significantly. Pt nanoparticles detached from the support and ECSA decreased drastically. In the second phase (~1500 AST cycles), carbon corrosion slowed down, but severe pore structure collapse was observed. Porosity and pore connectivity within the cathode catalyst layer decreased considerably. Electrochemical diagnostics corroborated this finding by showing significantly higher O2 mass transport resistance. Lastly, no significant change was observed in the concentration of oxides on the carbon surface after AST. But overall water management in the cathode catalyst layer deteriorated as the pore structure collapsed. This study provides an in-depth understanding of morphological changes during PEFC carbon corrosion AST protocol and motivates novel material design strategies to enable durable PEFCs.

catalyst layers↗

Nested Variant of the Method of Moments of Coupled Cluster Equations for Vertical Excitation Energies and Excited-state Potential Energy Surfaces

In this article we discuss a problem of proper balancing of the non-iterative corrections to the ground- and excited-state energies obtained with approximate coupled cluster (CC) and Equation-of-Motion CC (EOMCC) approaches. It is demonstrated that for a class of excited states dominated by single excitations and for states with medium doubly excited component the newly introduced embedded variant of the Method of Moments of Coupled Cluster equations provides mathematically rigorous way of balancing the ground- and excited-state correlation effects. The resulting noniterative methodology accounting for the effect of triples (Em-EOMCCSD(T)) is tested using its parallel implementation on the systems for which iterative CC/EOMCC calculations with full inclusion of triply excited configurations or their most important subset is numerically feasible.

97 MATHEMATICS AND COMPUTING↗

Dielectronic recombination studies based on EBIT

Dielectronic recombination (DR) process plays an important role in high temperature plasmas, where DR can affect charge balance and level populations significantly, and can cause radiative energy loss. Resolvable DR sourced satellite lines are often used for plasma temperature diagnostics, while the un-resolvable ones disturb determining spectral line shape, line intensity, and line position. Data of DR resonant strength is vital for accurate modeling of high temperature plasmas. DR studies are also important for testing atomic structure and atomic collision theories, since they carry information on quantum electrodynamics, relativistic effects, electron correlations and so on. Electron beam ion trap (EBIT) is an accelerator type device, which is capable of acting as both ion sources and light sources. EBIT can produce a special sort of plasma, in which electron energy is tunable and has a very narrow distribution. This made it possible for disentanglement studies on electron ion collision processes in plasmas. In this paper, experimental studies of DR processes based on electron beam ion traps (EBIT) will be discussed.

43 PARTICLE ACCELERATORS↗

Computational study of runaway electrons in MST tokamak discharges with applied resonant magnetic perturbation

A numerical study of magnetohydrodynamics (MHD) and tracer-particle evolution investigates the effects of resonant magnetic perturbations (RMPs) on the confinement of runaway electrons (REs) in tokamak discharges conducted in the Madison Symmetric Torus. In computational results of applying RMPs having a broad toroidal spectrum but a single poloidal harmonic, m = 1 RMP does not suppress REs, whereas m = 3 RMP achieves significant deconfinement but not the complete suppression obtained in the experiment. MHD simulations with the NIMROD code produce sawtooth oscillations, and the associated magnetic reconnection can affect the trajectory of REs starting in the core region. Simulations with m = 3 RMP produce chaotic magnetic topology over the outer region, but the m = 1 RMP produces negligible changes in field topology, relative to applying no RMP. Using snapshots of the MHD simulation fields, full-orbit relativistic electron test particle computations with KORC show ≈50% loss from the m = 3 RMP compared to the 10%–15% loss from the m = 1 RMP. Here, test particle computations of the m = 3 RMP in the time-evolving MHD simulation fields show correlation between MHD activity and late-time particle losses, but total electron confinement is similar to computations using magnetic-field snapshots.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bond length alternation of π -conjugated polymers predicted by the Fermi–Löwdin orbital self-interaction correction method

π-conjugated polymers have been used in a wide range of practical applications, partly due to their unique properties that originate in the delocalization of electrons through the polymer backbone. The level of delocalization can be characterized by the induced bond length alternation (BLA), with shorter BLA connected with strong delocalization and vice versa. The accurate description of this structural parameter can be considered a benchmark for testing the capability of different electronic structure methods for self-interaction error (SIE) removal and electron correlation inclusion. Density functional theory (DFT), in its local or semi-local flavors, suffers from SIE and, thus, underestimates the BLA compared to self-interaction-free methods. In this work, we utilize the Fermi–Löwdin orbital self-interaction correction (FLOSIC) method for one-electron self-interaction removal to characterize the BLA of five oligomers with increasing length extrapolated to the polymeric limit. We compare the self-interaction-free BLA to several DFT approximations, Møller–Plesset second-order perturbation theory (MP2), and the BLA obtained with the domain based local pair natural orbital CCSD(T) [DLPNO-CCSD(T)] approximation. Our findings show that FLOSIC corrects for the small BLA given by (semi-)local DFT approximations, but it tends to overcorrect with respect to CAM-B3LYP, MP2, and DLPNO-CCSD(T).

Chemistry↗

Updated Thermofluid Performance of the Simplified Flat Variant of the HEMJ

Our group has recently developed and studied “finger”-type divertors that are a simplified version of the helium-cooled modular divertor with multiple jets (HEMJ) using coupled computational fluid dynamics and thermal stress simulations. Such a simplified geometry could reduce complexity and cost given the large number of fingers required to cover the total divertor target area. Previous experimental studies for this simplified flat design reported lower heat transfer coefficients and higher pressure drops than the HEMJ, contrary to numerical predictions. Subsequent measurements determined that the original test section had significant dimensional variations in the jet exit holes. A new test section was therefore manufactured and tested in the Georgia Tech (GT) helium loop. The experimental results presented here for this test section at maximum heat flux of 7.1 MW/m 2 are in good agreement with numerical predictions. Correlations developed from these experimental data are extrapolated to predict the maximum heat flux that can be accommodated by the flat design and the coolant pumping power requirements under prototypical conditions. Lastly, numerical simulations are used to estimate the sensitivity of the flat design to geometric variations typical of manufacturing tolerances and variations in the gap width.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cosmic transients test Einstein’s Equivalence Principle out to GeV energies

The Einstein Equivalence Principle (EEP) can be probed with astrophysical sources emitting simultaneously different types of neutral particles, or particles with varying energies, by testing their time of flight through the same gravitational field. Here we use the time delays between correlated photons from cosmological transients to constrain the accuracy of the EEP. We take data from two gamma-ray bursts as an example and, as a lower limit to the theoretical time delays between different energies, we use delays arising from only the gravitational field of our own galaxy. We then show that the parameterized post-Newtonian parameter γ is the same for photons over energy ranges between eV and MeV and between MeV and GeV to a part in 10{sup −7}, which is at least one order of magnitude better than previous limits. Combining this bound on the wavelength dependence of γ with the absolute bound |γ−1|<0.3% from light-deflection measurements at optical (eV) wavelengths, we thus extend this absolute bound on γ to GeV energies.

79 ASTRONOMY AND ASTROPHYSICS↗

A low energy muon spin rotation and point contact tunneling study of niobium films prepared for superconducting cavities

Point contact tunneling and low energy muon spin rotation are used to probe, on the same samples, the surface superconducting properties of micrometer thick niobium films deposited onto copper substrates using different sputtering techniques: diode, dc magnetron and HIPIMS. The combined results are compared to radio-frequency tests performances of RF cavities made with the same processes. Degraded surface superconducting properties are found to correlate to lower quality factors and stronger Q-slope. In addition, both techniques find evidence for surface paramagnetism on all samples and particularly on Nb films prepared by HIPIMS.

LE-mu SR↗