Search NASA⌕ Search

SEARCH · Search NASA

Results for “total correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Dose Rate Effects in the Aging of Nuclear Cable Insulation Subjected to Gamma Radiation

In nuclear power plants (NPPs), the aging of polymer-based electrical cable insulation must be effectively monitored to ensure the safe and reliable operation of NPPs. Gamma radiation is one of the main environmental stressors causing degradation of cable insulation. For a given total dose of absorbed gamma radiation, damage due to gamma irradiation may be dose rate dependent. The purpose of this work is to confirm whether a dose rate effect exists for the cable insulation made by crosslinked polyethylene (XLPE) and ethylene propylene rubber (EPR), quantify the relationship between degradation rate and dose rate, and explore the correlation of different measured properties. The dose rate effects at 1800 Gy/h, 200 Gy/h, and 100 Gy/h using 60Co gamma irradiation on cable aging was studied. Different types of cable insulation, including two XLPEs and one EPR, were irradiated at the different dose rates with a total dose around 300 kGy at 26 °C. The properties of unirradiated and irradiated samples were characterized by mass change, yellowness index, and other ongoing measurements. Dose rate effects were observed for mass change data of XLPE and EPR.

Li, Donghui↗
NASA NTRS1984

Rain Volume Estimation over Areas Using Satellite and Radar Data

The application of satellite data to a recently developed radar technique used to estimate convective rain volumes over areas on a dry environment (the northern Great Plains) is discussed. The area time integral technique (ATI) provides a means of estimating total rain volumes over fixed and floating target areas of the order of 1,000 to 100,000 km(2) for clusters lasting 40 min. The basis of the method is the existence of a strong correlation between the area coverage integrated over the lifetime of the storm (ATI) and the rain volume. One key element in this technique is that it does not require the consideration of the structure of the radar intensities inside the area coverage to generate rain volumes, but only considers the rain event per se. This fact might reduce or eliminate some sources of error in applying the technique to satellite data. The second key element is that the ATI once determined can be converted to total rain volume by using a constant factor (average rain rate) for a given locale.

Doneaud, A. A.↗
DOE OSTI2016

Relationships between PEMFC Cathode Kinetic Losses and Contaminants’ Dipole Moment and Adsorption Energy on Pt

A database summarizing the effects of 21 contaminants on the performance of proton exchange membrane fuel cells (PEMFCs) was used to examine relationships between cathode kinetic losses and contaminant physicochemical parameters. Impedance spectroscopy data were employed to obtain oxygen reduction kinetic resistances by fitting data in the 10-158 Hz range to a simplified equivalent circuit. The contaminant dipole moment and the adsorption energy of the contaminant on a Pt surface were chosen as parameters. Dipole moments did not correlate with dimensionless cathode kinetic resistances. In contrast, adsorption energies were quantitatively and linearly correlated with minimum dimensionless cathode kinetic resistances. Contaminants influence the oxygen reduction for contaminant adsorption energies smaller than -24.5 kJ mol -1 , a value near the high limit of the adsorption energy of O 2 on Pt. Dimensionless cathode kinetic resistances linearly increase with decreasing O 2 adsorption energies below -24.5 kJ mol -1 . Measured total cell voltage losses are mostly larger than the cathode kinetic losses calculated from kinetic resistance changes, which indicates the existence of other sources of performance degradation. Modifications to the experimental procedure are proposed to ensure that data are comparable on a similar basis and improve the correlation between contaminant adsorption energy and kinetic cell voltage losses.

25 ENERGY STORAGE↗
DOE OSTI2018

On the geometric dependence of the molecular dipole polarizability in water: A benchmark study of higher-order electron correlation, basis set incompleteness error, core electron effects, and zero-point vibrational contributions

In this work, we investigate how geometric changes influence the static dipole polarizability ($α$) of a water molecule by explicitly computing the corresponding dipole polarizability surface (DPS) across 3125 total (1625 symmetry-unique) geometries using linear response coupled cluster theory including single, double, and triple excitations (LR-CCSDT) and the doubly augmented triple-$ζ$ basis set (d-aug-cc-pVTZ). Analytical formulae based on power series expansions of this $ab initio$ surface are generated using linear least-squares analysis and provide highly accurate estimates of this quantity as a function of molecular geometry (i.e., bond and angle variations) in a computationally tractable manner. An additional database, which consists of 25 representative molecular geometries and incorporates a more thorough treatment of both basis sets and core electron effects, is provided as a current benchmark for this quantity and the corresponding leading-order $C_6$ dispersion coefficient. This database has been utilized to assess the importance of these effects as well as the relative accuracy that can be obtained using several quantum chemical methods and a library of density functional approximations. In addition to high-level electron correlation methods (like CCSD) and our analytical least-squares formulae, we find that the SCAN0, PBE0, MN15, and B97-2 hybrid functionals yield the most accurate descriptions of the molecular polarizability tensor in H 2 O. Using first-order perturbation theory, we compute the zero-point vibrational correction to $α$ at the CCSDT/d-aug-cc-pVTZ level and find that this correction contributes approximately 3% to the isotropic ($α$ iso ) and nearly 50% to the anisotropic ($α$ aniso ) polarizability values. In doing so, we find that $α$ iso = 9.8307 bohr 3 , which is in excellent agreement with the experimental value of 9.83 ± 0.02 bohr 3 provided by Russell and Spackman. The DPS reported herein provides a benchmark-quality quantum mechanical estimate of this fundamental quantity of interest and should find extensive use in the development (and assessment) of next-generation force fields and machine-learning based approaches for modeling water in complex condensed-phase environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Low-energy positron scattering by pyrimidine

This work reports elastic integral and differential cross sections for positron collisions with pyrimidine, for energies up to 20 eV. The cross sections were computed with the Schwinger multichannel method in the static plus polarization approximation. We also employed the Born closure procedure to account for the long range potential due to the permanent dipole moment of the molecule. Our results are compared with the experimental total cross section of Zecca et al. [J. Phys. B 43, 215204 (2010)], the experimental grand-total, quasi-elastic integral and differential cross section of Palihawadana et al. [Phys. Rev. A 88, 12717 (2013)]. We also compare our results with theoretical integral and differential cross sections obtained by Sanz et al. [Phys. Rev. A 88, 62704 (2013)] with the R-matrix and the independent atom model with screening-corrected additivity rule methods, and with the results computed by Franz and Gianturco [Phys. Rev. A 88, 042711 (2013)] using model correlation-polarization potentials. The agreement between the theory and the experiment is encouraging.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Probing the gamma-ray variability in 3C 279 using broad-band observations

In this study, we present the results of a broad-band radio-to-GeV observing campaign organized to get a better understanding of the radiation processes responsible for the γ-ray flares observed in 3C 279. The total intensity and polarization observations of the source were carried out between 2013 December 28 and 2014 January 03 using the Fermi-Large Area Telescope, Swift-XRT, Swift-UVOT, and Korean VLBI Network telescopes. A prominent flare observed in the optical/near-UV passbands was found to be correlated with a concurrent γ-ray flare at a confidence level >95 percent, which suggests a co-spatial origin of the two. Moreover, the flaring activity in the two regimes was accompanied by no significant spectral variations. A peak in the X-ray light curve coincides with the peaks of the fractional polarization curves at 43 and 86 GHz radio bands. No prominent variation was noticed for the total intensity and the electric vector position angle observations at radio bands during this period. We noticed a possible hint of steepening of the radio spectrum with an increase in percentage polarization, which suggests that the radio polarization variations could be simply due to a spectral change. In a simple scenario, the correlated optical/γ-ray flares could be caused by the same population of emitting particles. The coincidence of the increase in radio polarization with the X-ray flux supports the picture that X-rays are produced via inverse-Compton scattering of radio photons. Finally, the observed fractional variability for the γ-ray flare ~0.23 does not exceed that in the optical regime, which is inconsistent with what we usually observe for 3C 279; it could be due to different dependencies of the magnetic field and the external radiation field energy density profiles along the jet.

3C 279, gamma-rays↗
DOE OSTI2017

Understanding the Lung Abscess Microbiome: Outcomes of Percutaneous Lung Parenchymal Abscess Drainage with Microbiologic Correlation

IntroductionLung parenchymal abscesses represent an uncommon pathology with high mortality if untreated. Although most respond well to antibiotics, the optimal therapy for persistent abscesses is unknown. The purpose of this study was to review the outcomes of percutaneous lung parenchymal abscess catheter drainage after broad-spectrum antibiotic therapy failure and correlate with patient microbiologic samples.Materials and MethodsRetrospective review of patients who underwent percutaneous lung abscess drainage at a tertiary hospital system from 2005 to 2015 was performed. In total, 19 procedures were identified on 16 different patients; six females and ten males. Mean patient age was 55 years (range 22–81). Median follow-up time was 7 months (range <1–78).ResultsTechnical success was 100%. There was one major complication, a pneumothorax. Follow-up was until tube removal or death in 100% of patients. Catheters were removed with resolution of the abscess cavity in 58% (11/19) or with non-draining abscess cavities in 21% (4/19) for a clinical success rate of 79%. Blood cultures demonstrated no growth in all cases, while 21% (4/19) of sputum or bronchoscopic cultures demonstrated growth. In comparison, the specimens from initial catheter placement isolated a causative organism in 95% (18/19) of case (p < 0.0001).ConclusionIn cases of persistent lung abscess after broad-spectrum antibiotics, percutaneous abscess drainage is highly sensitive for microbiologic sampling compared to sputum/bronchoscopic or blood cultures. Additionally, percutaneous drainage of lung parenchymal abscess cavities may promote resolution of the abscess with high rates of therapeutic success and low complications.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2025

Dynamic, symmetry-preserving, and hardware-adaptable circuits for quantum computing many-body states and correlators of the Anderson impurity model

We present a hardware-reconfigurable ansatz on N q -qubits for the variational preparation of many-body states of the Anderson impurity model (AIM) with N imp + N bath = N q /2 sites, which conserves total charge and spin z component within each variational search subspace. The many-body ground state of the AIM is determined as the minimum over all minima of O(N$^2_ q$) distinct charge-spin sectors. Hamiltonian expectation values are shown to require ω(N q ) < N meas. $\leqslant$ O(N imp N bath ) symmetry-preserving, parallelizable measurement circuits, each amenable to postselection. To obtain the one-particle impurity Green’s function we show how initial Krylov vectors can be computed via midcircuit measurement and how Lanczos iterations can be computed using the symmetry-preserving ansatz. For a single-impurity Anderson model with a number of bath sites increasing from one to seven, we show using numerical emulation that the ease of variational ground-state preparation is suggestive of linear scaling in circuit depth and subquartic scaling in optimizer complexity. We therefore expect that, combined with time-dependent methods for Green’s function computation, our ansatz provides a useful tool to account for electronic correlations on early fault-tolerant processors. Finally, with a view towards computing real materials properties of interest like magnetic susceptibilities and electron-hole propagators, we provide a straightforward method to compute many-body, time-dependent correlation functions using a combination of time evolution, midcircuit measurement-conditioned operations, and the Hadamard test.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Total metals, sulfur and organic carbon data; Slate River floodplain, Crested Butte, CO; March 2021-October 2021

This data package includes processed and undiluted measurements for metal, sulfur and organic carbon concentrations from pore water (groundwater) samples from the Slate River floodplain of Crested Butte, CO, a focus field site for the SLAC Floodplain Hydro-Biogeochemistry SFA. The data was generated as part of the work targeting the overarching research question for the SLAC SFA: How do ubiquitous subsurface interfaces mediate molecular-scale biogeochemical processes and groundwater quality in floodplains and watersheds? Samples were collected between March and October of 2021. These measurements were all recorded at the Environmental Measurements Facility (EM-1) at Stanford University in Stanford, CA. Groundwater samples were extracted from a network of installed rhizon (Rhizosphere Research Products, part no. 19.60.21F, 0.6 micrometer mesh size) and piezometer wells within the river floodplain. All water samples were shaded from sun exposure during extraction from the subsurface and preserved at 2C until measured at EM-1.Analysis by ICP-MS:Measurements for total metals were performed on an inductively coupled plasma optical emission spectrometer (ICP-OES; iCAP 6300, Thermo Scientific, Cambridge, U.K.). Calibration standards were prepared from the mulit element stock solution (Sigma-Aldrich Multielement standard for ICP, St. Louis, MO) using matrix matched to sample solutions (2% HNO3). Calibration curves included 5 points with correlation coefficients of >0.99. The QC protocol includes a continuing calibration blank and quality control samples that are analyzed just after calibration and again every 20 samples and at the completion of the run. Acceptable QC responses must be between 90-110% of the certified value. Analysis by Total Organic Carbon:Dissolved organic carbon concentrations were quantified on a total organic carbon (TOC) analyzer (TOC-L, Shimadzu, Kyoto, Japan) running the NPOC method. Standard curves were developed using an Organic Carbon Standard from RICCA Chemical Company (Arlington,TX). A series of 4 to 6 standards were automatically diluted by the instrument in a concentration range that spans that of the samples. A blank sample was run just after the calibration curve and at the end of the run. A QC sample was run every 25 samples. Acceptable QC responses must be between 90-110% of the certified value.All files are in csv format.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2021

Preferential Loss of Yukon River Delta Colored Dissolved Organic Matter under Nutrient Replete Conditions

The Yukon River exports a large amount of dissolved organic carbon (DOC), much of which is colored, absorbing visible and ultraviolet light. Yukon River water typically has low total dissolved nitrogen (TDN), with an average DOC : TDN ratio of 21.1 (mol C mol N−1) ~ 200 km upstream from the coast at Pilot Station, Alaska. TDN has been correlated to the bioavailability of DOC, but a direct estimate of the dependence of DOC reactivity on nutrient availability has not been conducted in the Yukon River delta. The biodegradability of DOC and colored dissolved organic matter (CDOM) was assessed along a gradient within the Yukon River delta and into the coastal ocean. Samples were dark incubated at 20􀀀C and half of the incubations were amended with inorganic nutrients. At five time points through 27 d, CDOM absorption and DOC concentration were measured. Initial DOC concentration was 113–830 μmol C L−1 and CDOM absorption at 443 nm (a443) ranged from 0.16 to 7.8 m−1 from the ocean to a high CDOM lake. DOC was relatively unreactive, with 3–6% of DOC degrading in riverine samples and little difference between nutrient amended and control incubations. Control river delta a443 decreased 3–10%, while nutrient amended treatments saw a 6–22% decline over 27 d. In the nutrient amended riverine stations, CDOM absorption loss was greater at blue wavelengths and CDOM degradation was greater than total DOC loss. DOC was resistant to biodegradation in both nutrient amended and ambient conditions, while CDOM was preferentially degraded when nutrients were replete.

J Blake Clark↗
DOE OSTI2022

Numerical investigation of the effect of ultrasound on paper drying

The paper drying process is very energy inefficient. More than two-thirds of the total energy used in a paper machine is for drying paper. Novel drying technologies, such as ultrasound (US) drying, can be assessed numerically for developing next-generation drying technologies for the paper industry.This work numerically illustrates the impact on drying process energy efficiency of US transducers installed on a two-tiered dryer section of a paper machine. Piezoelectric transducers generate ultrasound waves, and liquid water mist can be ejected from the porous media. The drying rate of handsheet paper in the presence of direct-contact USis measured experimentally, and the resultant correlation is included in the theoretical model.The drying section of a paper machine is simulated by a theoretical drying model. In the model, three scenarios are considered. In the first scenario, the US modules are positioned in the dryer pockets, while in the second scenario, they are placed upstream of the drying section right after the press section. The third case is the combination ofthe first and second scenarios. The average moisture content and temperature during drying, enhancement of total mass flux leaving the paper by the US mechanism, total energy consumption, and thermal effect of heated US transducers are analyzed for all cases. Results show that the application of the US can decrease the total number of dryer drums for drying paper. This numerical study is based on the US correlation obtained with the US transducer in direct contact with the paper sample. Thus, future work should include US correlation based on a non-contact US transducer.

Materials Science↗
NASA NTRS2009

Aerothermodynamic Design of the Mars Science Laboratory Heatshield

Aerothermodynamic design environments are presented for the Mars Science Laboratory entry capsule heatshield. The design conditions are based on Navier-Stokes flowfield simulations on shallow (maximum total heat load) and steep (maximum heat flux, shear stress, and pressure) entry trajectories from a 2009 launch. Boundary layer transition is expected prior to peak heat flux, a first for Mars entry, and the heatshield environments were defined for a fully-turbulent heat pulse. The effects of distributed surface roughness on turbulent heat flux and shear stress peaks are included using empirical correlations. Additional biases and uncertainties are based on computational model comparisons with experimental data and sensitivity studies. The peak design conditions are 197 W/sq cm for heat flux, 471 Pa for shear stress, 0.371 Earth atm for pressure, and 5477 J/sq cm for total heat load. Time-varying conditions at fixed heatshield locations were generated for thermal protection system analysis and flight instrumentation development. Finally, the aerothermodynamic effects of delaying launch until 2011 are previewed.

Edquist, Karl T.↗
DOE OSTI2015

Reducing conditions, reactive metals, and their interactions can explain spatial patterns of surface soil carbon in a humid tropical forest

Humid tropical forests support large stocks of surface soil carbon (C) that exhibit high spatial variability over scales of meters to landscapes (km). Reactive minerals and organo-metal complexes are known to contribute to C accumulation in these ecosystems, although potential interactions with environmental factors such as oxygen (O 2 ) availability have received much less attention. Reducing conditions can potentially contribute to C accumulation, yet anaerobic metabolic processes such as iron (Fe) reduction can also drive substantial C losses. We tested whether these factors could explain variation in soil C (0–10 and 10–20 cm depths) over multiple spatial scales in the Luquillo Experimental Forest, Puerto Rico, using reduced iron (Fe(II)) concentrations as an index of reducing conditions across sites differing in vegetation, topographic position, and/or climate. Fine root biomass and Fe(II) were the best overall correlates of site (n = 6) mean C concentrations and stocks from 0 to 20 cm depth (r = 0.99 and 0.98, respectively). Litterfall decreased as reducing conditions, total and dead fine root biomass, and soil C increased among sites, suggesting that decomposition rates rather than C inputs regulated soil C content at the landscape scale. Strong relationships between Fe(II) and dead fine root biomass suggest that reducing conditions suppressed particulate organic matter decomposition. The optimal mixed-effects regression model for individual soil samples (n = 149) showed that aluminum (Al) and Fe in citrate/ascorbate and oxalate extractions, Fe(II), fine root biomass, and interactions between Fe(II) and Al explained most of the variation in C concentrations (pseudo R 2 = 0.82). The optimal model of C stocks was similar but did not include fine root biomass (pseudo R 2 = 0.62). In these models, soil C concentrations and stocks increased with citrate/ascorbate-extractable Al and oxalate-extractable Fe. However, soil C decreased with citrate/ascorbate-extractable Fe, an index of Fe susceptible to anaerobic microbial reduction. At the site scale (n = 6), ratios of citrate/ascorbate to oxalate-extractable Fe consistently decreased across a landscape O 2 gradient as C increased. Finally, we suggest that the impact of reducing conditions on organic matter decomposition and the presence of organo-metal complexes and C sorption by short-range order Fe and Al contribute to C accumulation, whereas the availability of an Fe pool to sustain anaerobic respiration in soil microsites partially attenuates soil C accumulation in these ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Physical Kinetics of Electrons in a High-Voltage Pulsed High-Pressure Discharge with Cylindrical Geometry

Results of theoretical modeling of the phenomenon of a high-voltage discharge in nitrogen at atmospheric pressure are presented, based on a consistent kinetic theory of the electrons. A mathematical model of a nonstationary high-pressure discharge has been constructed for the first time, based on a description of the electron component from first principles. The physical kinetics of the electrons are described with the help of the Boltzmann kinematic equation for the electron distribution function over momenta with only ionization and elastic collisions taken into account. A detailed spatiotemporal picture of a nonstationary discharge with runaway electrons under conditions of coaxial geometry of the gas diode is presented. The model describes in a self-consistent way both the process of formation of the runaway electron flux in the discharge and the influence of this flux on the rate of ionization processes in the gas. Total energy spectra of the electron flux incident on the anode are calculated. The obtained parameters of the current pulse of the beam of fast electrons correlate well with the known experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Soybean CCA1-like MYB transcription factor GmMYB133 modulates isoflavonoid biosynthesis

Highlights: • A CCA1-like GmMYB133 was functionally characterized as a new positive regulator in isoflavonoid synthesis. • GmMYB133 might form hetero- and homodimers with an isoflavonoid regulator GmMYB176 and itself, respectively. • The subcellular localization of GmMYB133 can be altered by its interaction with 14-3-3 protein. MYB transcription factors play important roles in the regulation of phenylpropanoid biosynthesis. However, the knowledge regarding the roles of CCA1-like MYBs in phenylpropanoid pathway is limited in plants. Previously, we identified 54 CCA1-like proteins in soybean. In the study, a CCA1-like MYB (GmMYB133) was functionally characterized as a positive regulator in isoflavonoid synthesis. GmMYB133 encodes a 330 aa protein featured with one CCA1 conserved motif. Further analysis indicated that the expression pattern of GmMYB133 was near-perfectly correlated with isoflavonoid accumulation as soybean embryos develop. GmMYB133 over-expression promoted the expression of two key isoflavonoid biosynthetic genes (GmCHS8 and GmIFS2) and increased total isoflavonoid content in hairy roots. Protein-protein interaction assays indicated that GmMYB133 might form hetero- and homodimers with an isoflavonoid regulator GmMYB176 and itself, respectively, while the subcellular localization of GmMYB133 can be altered by its interaction with 14-3-3 protein. These findings provided new insights into the functional roles of CCA1-like MYB proteins in the regulation of phenylpropanoid pathway, and will contribute to the future genetic engineering in the improvement of soybean seed quality.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Effective gaseous diffusion coefficients of select ultra-fine, super-fine and medium grain nuclear graphite

Understanding “Where?” and “How much?” oxidation has occurred in a nuclear graphite component is critical to predicting any deleterious effects to physical, mechanical, and thermal properties. A key factor in answering these questions is characterizing the effective mass transport rates of gas species in nuclear graphites. Effective gas diffusion coefficients were determined for twenty-six graphite specimens spanning six modern grades of nuclear graphite. A correlation was established for the majority of grades examined allowing a reasonable estimate of the effective diffusion coefficient to be determined purely from an estimate of total porosity. The importance of Knudsen diffusion to the measured diffusion coefficients is also shown for modern grades. Furthermore, Knudsen diffusion has not historically been considered to contribute to measured diffusion coefficients of nuclear graphite.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2014

Small-angle neutron scattering analysis of Mn–C clusters in high-manganese 18Mn–0.6C steel

Nanometer-scale particles (Mn–C clusters) were analyzed quantitatively using small-angle neutron scattering in 18Mn–0.6C (wt.%) austenite high-manganese steel. The size, number, and volume fraction of the particles were determined as a function of strain (0, 5, 15, 30, 45, 50%) at different temperatures (25 and 100 °C). The diameter of the cluster ranges from 2 to 14 nm in the matrix. The total volume fraction of the cluster significantly increases from 2.7 × 10{sup −6} to 8.7 × 10{sup −6} as the strain increases. Such clustering phenomenon is correlated to the serration behavior under loading in high-manganese steels. - Highlights: • Show Mn-C clustering as function of strain in 18Mn-0.6C TWIP steel. • Determine the size, number, and volume fraction of clusters quantitatively. • Compare the clustering behavior at 25 and 100 °C.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Capturing Sub‐Kilometer Flood Inundation Dynamics During the California Rain‐on‐Snow Events of 2017

The severe impacts of rain‐on‐snow (ROS) extreme events have been widely recognized and studied. However, unlike hydrological processes, flood inundation dynamics and the relative contribution of rainfall and snowmelt during ROS events remain under‐investigated. We diagnosed and documented sub‐kilometer spatio‐temporal dynamics of flood inundation during the 2017 California ROS events, simulated by a 2‐dimensional hydrodynamic model, River Dynamical Core (RDycore). RDycore shows good performance in capturing fine‐scale flood inundation dynamics against gauge measurements (with a median correlation coefficient of 0.81) and satellite observations. On top of rainfall, snowmelt not only increases the mean maximum inundation depth (12.0%–25.1%), but also expands the total flooded area (19.9%–31.9%) and prolongs the mean flood duration (3.4%–7.1%) across the events. Our findings offer an explicit and accurate picture of when and where ROS flooding could occur and how snowmelt increases flood hazard, valuable for risk assessment and infrastructure planning.

Flood inundation↗