Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLAME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

A General Route to Flame Aerosol Synthesis and In Situ Functionalization of Mesoporous Silica

Abstract Mesoporous silica is a versatile material for energy, environmental, and medical applications. Here, for the first time, we report a flame aerosol synthesis method for a class of mesoporous silica with hollow structure and specific surface area exceeding 1000 m 2 g −1 . We show its superior performance in water purification, as a drug carrier, and in thermal insulation. Moreover, we propose a general route to produce mesoporous nanoshell‐supported nanocatalysts by in situ decoration with active nanoclusters, including noble metal (Pt/SiO 2 ), transition metal (Ni/SiO 2 ), metal oxide (CrO 3 /SiO 2 ), and alumina support (Co/Al 2 O 3 ). As a prototypical application, we perform dry reforming of methane using Ni/SiO 2 , achieving constant 97 % CH 4 and CO 2 conversions for more than 200 hours, dramatically outperforming an MCM‐41 supported Ni catalyst. This work provides a scalable strategy to produce mesoporous nanoshells and proposes an in situ functionalization mechanism to design and produce flexible catalysts for many reactions.

Liu, Shuo↗

Excellent antioxidizing, thermally insulating and flame resistance silica‐polybenzoxazine aerogels for aircraft ablative materials

Abstract High‐performance thermal protective composites with lightweight, micro‐ ablation and high‐efficient thermal insulation are urgently required for thermal protection systems in advanced hypersonic speed vehicles. However, the practical applications of thermal protective composites have long been hampered by the main issues such as low mass residual rate and poor long‐term antioxidation of the matrix in high‐temperature aerobic environments. Here, we report a novel silica‐polybenz oxazine (SiO 2 ‐PBO) aerogels with interpenetrated networks, possessing the ability to antioxidation, thermal insulation, and flame‐retardant properties. The resulting SiO 2 ‐PBO aerogels exhibit low density (0.25 g/cm 3 ), low thermal conductivity (0.035 W/(m·K)), and superior peak heat release rate value (15.3 W/g). Moreover, the mass residual rate is up to 70.46 wt% in the N 2 atmosphere and remains 57.83 wt% despite existing in the air atmosphere and experiencing the highest temperature of 800°C. Briefly, SiO 2 ‐PBO aerogels as‐prepared could be a potential matrix for a new gene ration of high‐performance thermal protective composites in the future.

Xiao, Yunyun↗

Expansion Behavior and Temperature Mapping of Thermites in Burn Tubes as a Function of Fill Length [Thermal Imaging of Thermite Flame Propagation]

The reaction of loosely-packed aluminum/copper oxide (Al/CuO) thermites in a 12 cm long acrylic burn tube was investigated as a function of the fill length from 2 to 10 cm. The velocity of the luminous front was measured both in the filled and unfilled region, and approached 1000 m s-1 in the unfilled region, independent of the fill length. This value is approximately a factor of two higher than the fastest velocity measured in the filled region, 606 m s-1, for the 10 cm filled tube. The velocity increase in the unfilled region ist likely due to the increased open porosity, which can support faster flow velocities for a given pressure gradient relative to that in the porous material. A high-speed color imaging pyrometer was used to thermally map the evolution of the flame in both regions. Near the luminous front in the filled section, the temperature was observed to rapidly increase in a 1–2 cm zone to a maximum value near 3200 K, and an average value near 3000 K was sustained in the wake well after the front passes and exits the tube. In partially-filled tubes, even for the lowest fill length of 2 cm, the intermediate and/or product species could be seen to expand forward and completely fill the tube with a sustained temperature of ca. 3000 K. This temperature did not decay during the expansion, suggesting that the material continues to react as it expands. The results raise several questions about what a burn tube experiment is really measuring; such as what fraction of the material has burned when the luminous front passes and what role open cracks or microstructures play in promoting transport. Lastly, these questions are critically important towards developing a predictive capability for confined, loosely packed deflagrations.

36 MATERIALS SCIENCE↗

Accurate and Sensitive Analytical Strategy for the Determination of Antimony: Hydrogen Assisted T-Shaped Slotted Quartz Tube-Atom Trap-Flame Atomic Absorption Spectrometry

Antimony is known to have some adverse health effects on human health. Flame atomic absorption spectrometry (FAAS) is a widely used instrumental for the determination of antimony and other metals. However, it lacks the sensitivity to determine these metals at trace levels. This study was aimed at overcoming this setback by using hydrogen assisted T-shaped slotted quartz tube technique to preconcentrate and determine antimony by FAAS. All the system parameters were optimized to enhance the detection power of the system. Under the optimum experimental conditions, the limits of detection and quantification were found to be 0.75 and 2.49 µg L{sup −1}, respectively with R{sup 2} value of 0.9999. Accuracy of the developed method was validated by experimental results agreeing to the certified value of a standard reference material. Recovery studies were also carried out to determine the method’s applicability to tap and mineral water samples, and the results obtained were appreciable.

54 ENVIRONMENTAL SCIENCES↗

Rapid Determination of Trace Palladium in Active Pharmaceutical Ingredients by Magnetic Solid-Phase Extraction and Flame Atomic Absorption Spectrometry

Clutaraldehyde cross-linked magnetic chitosan nanoparticles were synthesized and used as an adsorbent for the dispersive solid-phase extraction of palladium in active pharmaceutical ingredients (APIs) prior to analysis by a flame atomic absorption spectrophotometer. FT-IR, X-ray diffraction, and TEM were used to characterize the adsorbent. Various parameters of experimental performance, such as adsorbent amount, pH, adsorption time, desorption solutions, coexisting ions, and adsorbent reusability, were investigated and optimized. Under the optimized conditions, good linearity was achieved in the 5.0–500 μg/L concentration range, with correlation coefficients of 0.9989. The limit of detection is 2.8 μg/L and the recoveries of spiked samples ranged from 91.7 to 97.6%. It was confirmed that the GMCNs nanocomposite was a promising adsorbing material for extraction and preconcentration of Pd in APIs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

n-Heptane cool flame chemistry: Unraveling intermediate species measured in a stirred reactor and motored engine

This paper identifies classes of cool flame intermediates from n-heptane low-temperature oxidation in a jet-stirred reactor (JSR) and a motored cooperative fuel research (CFR) engine. The sampled species from the JSR oxidation of a mixture of n-heptane/O 2 /Ar (0.01/0.11/0.88) were analyzed using a synchrotron vacuum ultraviolet radiation photoionization (SVUV-PI) time-of-flight molecular-beam mass spectrometer (MBMS) and an atmospheric pressure chemical ionization (APCI) Orbitrap mass spectrometer (OTMS). The OTMS was also used to analyze the sampled species from a CFR engine exhaust. Approximately 70 intermediates were detected by the SVUV-PI-MBMS, and their assigned molecular formulae are in good agreement with those detected by the APCI-OTMS, which has ultra-high mass resolving power and provides an accurate elemental C/H/O composition of the intermediate species. Furthermore, the results show that the species formed during the partial oxidation of n-heptane in the CFR engine are very similar to those produced in an ideal reactor, i.e., a JSR. The products can be classified by species with molecular formulae of C 7 H 14 O x (x = 0–5), C 7 H 12 O x (x = 0–4), C 7 H 10 O x (x = 0–4), C n H 2n (n = 2–6), C n H 2n-2 (n = 4–6), C n H 2n+2 O (n = 1–4), C n H 2n O (n = 1–6), C n H 2n-2 O (n = 2–6), C n H 2n-4 O (n = 4–6), C n H 2n+2 O 2 (n = 0–4, 7), C n H 2n O 2 (n = 1–6), C n H 2n-2 O 2 (n = 2–6), C n H 2n-4 O 2 (n = 4–6), and C n H 2n O 3 (n = 3–6). The identified intermediate species include alkenes, dienes, aldehyde/keto compounds, olefinic aldehyde/keto compounds, diones, cyclic ethers, peroxides, acids, and alcohols/ethers. Reaction pathways forming these intermediates are proposed and discussed herein. Finally, these experimental results are important in the development of more accurate kinetic models for n-heptane and longer-chain alkanes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cool flame chemistry of diesel surrogate compounds: n -Decane, 2-methylnonane, 2,7-dimethyloctane, and n -butylcyclohexane

Elucidating the formation of combustion intermediates is crucial to validate reaction pathways, develop reaction mechanisms and examine kinetic modeling predictions. While high-temperature pyrolysis and oxidation intermediates of alkanes have been thoroughly studied, comprehensive analysis of cool flame intermediates from alkane autoxidation is lacking and challenging due to the complexity of intermediate species produced. Here, jet-stirred reactor autoxidation of four C 10 alkanes: n -decane, 2-methylnonane, 2,7-dimethyloctane, and n -butylcyclohexane, as model compounds of diesel fuel, was investigated from 500 to 630 K using synchrotron vacuum ultraviolet photoionization molecular beam mass spectrometry (SVUV-PIMS). Around 100 intermediates were detected for each fuel. The classes of molecular structures present during the autoxidation of the representative paraffinic functional groups in transport fuels, i.e., n -alkanes, branched alkanes, and cycloalkanes were established and were found to be similar from the oxidation of various alkanes. A theoretical approach was applied to estimate the photoionization cross sections of the intermediates with the same carbon skeleton as the reactants, e.g., alkene, alkenyl keto, cyclic ether, dione, keto-hydroperoxide, diketo-hydroperoxide, and keto-dihydroperoxide. These species are indicators of the first, second, and third O 2 addition reactions for the four C 10 hydrocarbons, as well as bimolecular reactions involving keto-hydroperoxides. Chemical kinetic models for the oxidation of these four fuels were examined by comparison against mole fraction of the reactants and final products obtained in additional experiments using gas chromatography analysis, as well as the detailed species pool and mole fractions of aforementioned seven types of intermediates measured by SVUV-PIMS. This works reveals that the models in the literature need to be improved, not only the prediction of the fuel reactivity and final products, but also the reaction network to predict the formation of many previous undetected intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Body burdens of brominated flame retardants and other persistent organo-halogenated compounds and their descriptors in US girls

Background: Levels of brominated flame retardants are increasing in US populations, yet little data are available on body burdens of these and other persistent hormonally active agents (HAAs) in school-aged children. Exposures to such chemicals may affect a number of health outcomes related to development and reproductive function. Objective: Determine the distribution of biomarkers of polybrominated diphenyl ethers (PBDEs), polychlorinated biphenyls (PCBs), and organo-chlorinated pesticides (OCPs), such as DDT/DDE, in children, and their variation by key descriptor variables. Methods: Ethnically diverse cohorts of girls 6-8 y old at baseline are being followed for growth and pubertal development in a multi-site, longitudinal study. Nearly 600 serum samples from the California and Ohio sites were analyzed for lipids, 35 PCB congeners, 11 PBDE congeners, and 9 OCPs. The biomarker distributions were examined and geometric means compared for selected analytes across categories of age, race, site, body mass index (BMI), parental education, maternal age at delivery, and breast feeding in adjusted models. Results: Six PBDE congeners were detected among greater than 70% of samples, with BDE-47 having the highest concentration (median 42.2, range 4.9-855 ng/g lipid). Girls in California had adjusted geometric mean (GM) PBDE levels significantly higher than girls in Ohio. Furthermore, Blacks had significantly higher adjusted GMs of all six PBDE congeners than Whites, and Hispanics had intermediate values. GMs tended to be lower among more obese girls, while other variables were not strongly associated. In contrast, GMs of the six PCB congeners most frequently detected were significantly lower among Blacks and Hispanics than Whites. PCBs and the three pesticides most frequently detected were also consistently lower among girls with high BMI, who were not breast-fed, whose mothers were younger, or whose care-givers (usually parents) were less educated. Girls in California had higher GMs than in Ohio for the pesticides and most PCB congeners, but the opposite for CB-99 and -118. Conclusions: Several of these potential HAAs were detected in nearly all of these young girls, some at relatively high levels, with variation by geographic location and other demographic factors that may reflect exposure pathways. The higher PBDE levels in California likely reflect differences in fire regulation and safety codes, with potential policy implications.

60 APPLIED LIFE SCIENCES↗

Concentrations of organophosphate flame retardants and plasticizers in urine from young children in Queensland, Australia and associations with environmental and behavioural factors

Highlights: • Eight OPFRs and eleven metabolites were measured in the urine of Australian kids. • Age was positively associated with BBOEP and negatively associated with BCIPP. • Mouthing activities were associated with higher concentrations of TBOEP, and TPHP. • Children living with window AC units had higher concentrations of BCIPHIPP and DBP. In recent years, the production and usage volumes of organophosphate flame retardants (OPFRs) has increased substantially. Certain OPFRs are suspected reproductive toxins, carcinogenic, and neurotoxic. Insufficient information is available on human exposure pathways to these chemicals, particularly in Australia. We aim to assess the association between OPFR concentrations in the urine of children to environmental and behavioural risk factors. Concentrations of eight OPFRs and eleven metabolites were measured in the urine of 51 children, aged 3–29 months, in Southeast Queensland, Australia and compared to their behavioural and environmental risk factor data obtained by an online questionnaire. Of the 11 OPFR metabolites analysed, 55% were frequently detected in the majority (> 80%) of samples. The most frequently detected metabolite was bis(1,3-dichloroisopropyl) phosphate (BDCIPP) (detected in 100% of samples), followed by 1-hydroxy-2-propyl bis(1-chloro-2-propyl) phosphate (BCIPHIPP) (96%), diphenyl phosphate (DPHP) (94%) and bis(1-chloroisopropyl) phosphate (BCIPP) (86%). In multivariable modelling, age was positively associated with concentrations of bis(2-butoxyethyl) phosphate (BBOEP) and negatively associated with concentrations of BCIPP and BCIPHIPP. Other non-age related factors, including vacuuming frequency, hand-washing frequency and presence and number of some electrical appliances in the home were also associated with concentrations of OPFR metabolites.

54 ENVIRONMENTAL SCIENCES↗

Metabolites of organophosphate ester flame retardants in urine from Shanghai, China

Highlights: • Nine organophosphate ester (OPE) metabolites were determined in urine from a population in Shanghai. • Urinary levels of OPE metabolites were lower than those from more developed countries. • Age of donors and age of homes were determinants of diphenyl phosphate (DPHP) and di-n-butyl phosphate (DNBP) exposures. • Urinary DNBP levels were associated with self-reported symptoms of allergy. The metabolites of nine organophosphate ester (OPE) flame retardants were measured in 180 urine samples collected from a population (including adults and children) in western Shanghai, China, using liquid chromatography-tandem spectrometry (LC-MS/MS). The total urinary concentrations of nine OPE metabolites ranged 100–23800 pg/mL, with a geometric mean (GM) value of 1450 pg/mL. The concentrations of alkyl-OPE metabolites (879 pg/mL) were approximately an order of magnitude higher than those of aryl-OPE (53.7 pg/mL) and chlorinated-OPE metabolites (52.7 pg/mL). Diphenyl phosphate (DPHP), diethyl phosphate (DEP), di-n-butyl phosphate (DNBP), bis(2-ethylhexyl) phosphate (BEHP), and bis(2-butoxyethyl) phosphate (BBOEP) were the dominant OPE metabolites found in urine. The results showed that an increase in age was associated with a significant decrease in urinary DPHP (r = −0.278, p < 0.01) and DNBP (r = −0.314, p < 0.01) concentrations. The highest concentrations of DPHP (GM = 80.7 pg/mL) and DNBP (GM = 16.9 pg/mL) were found in urine from people living in homes that were less than 10 years old. The urinary DNBP concentration was significantly associated with self-reported symptoms of allergy. Our result establishes baseline value for OPE exposure in a population in China for comparison in future studies.

54 ENVIRONMENTAL SCIENCES↗

A multiscale combustion model formulation for NO x predictions in hydrogen enriched jet flames

Here the present paper investigates the role of combustion models and kinetic mechanisms on the prediction of NO x emissions in a turbulent combustion system where conventional and unconventional routes are equally important for NO x formation. To this end, a lab-scale combustion system working in Moderate and Intense Low-oxygen Dilution (MILD) conditions, namely the Adelaide Jet in Hot Co-flow (JHC) burner, is targeted. The Eddy Dissipation Concept (EDC) and the Partially-Stirred Reactor (PaSR) models are used for turbulence-chemistry interactions. The KEE and GRI2.11 chemical mechanisms are employed. The results show that the choice of the combustion model has a higher impact than the selection of the kinetic mechanism for the investigated cases, indicating that biases in the turbulent reactive flow closure are as important, if not more, as the level of the accuracy of the chemical scheme employed. Moreover, the sensitivity of the NO emissions to the uncertain kinetic parameters of the rate-limiting reactions of the NNH pathway is found to be significant when a detailed kinetic mechanism is used. An engineering modification of the PaSR combustion model is proposed to account for the different chemical time scales of fuel oxidation reactions and NO x formation pathways. It shows an equivalent impact on the emissions of NO than the uncertainty in the NNH pathway kinetics. At the cost of introducing a negligible mass imbalance, the adjustment leads to improved predictions of NO. The investigation establishes a possibility for the engineering modeling of NO formation in turbulent flames with a finite-rate chemistry combustion model that can incorporate a detailed mechanism at an affordable computational cost.

08 HYDROGEN↗

Evaluation of methods for characterizing the fine particulate matter emissions from aircraft and other diffusion flame combustion aerosol sources

The U. S. Environmental Protection Agency in collaboration with the U. S. Air Force Arnold Engineering Development Complex conducted the VAriable Response In Aircraft nvPM Testing (VARIAnT) 3 and 4 test campaigns to compare nvPM emissions measurements from a variety of diffusion flame combustion aerosol sources (DFCASs), including a Cummins diesel engine, a diesel powered generator, two gas turbine start carts, a J85-GE-5 turbojet engine burning multiple fuels, and a Mini-CAST soot generator. The VARIAnT research program has conducted four test campaigns to date with the VARIAnT 3 and 4 test campaigns focusing on BC mass instrument performance, use of gas turbine engine sources for BC mass instrument calibration, and the characterization of the aerosols produced from the combustion sources. Results from both campaigns revealed agreement of about 20% between the AVL Micro-Soot Sensor, the Cavity Attenuated Phase Shift (CAPS PMSSA) monitor and the thermal-optical reference method for elemental carbon (EC), independent of the calibration source used. For the Artium LII-300, the measured mass concentrations in VARIAnT3 fall within 18% and in VARIAnT4 fall within 32% of the reference EC mass concentration when calibrated on a combustor rig in VARIAnT3 and on a LGT-60 start cart in VARIAnT4, respectively. It was also found that the three mass instrument types (MSS, CAPS PMSSA, and LII-300) can exhibit different BC to reference EC ratios depending on the emission source that appear to correlate to particle geometric mean mobility diameter, morphology, or some other parameter associated with particle geometric mean diameter (GMD) with the LII-300 showing a slightly stronger apparent trend with GMD. Systematic differences in LII-300 measured mass concentrations have been reduced by calibrating with a turbine combustion source (combustor or turbine engine). With respect to the particle size measurements made, the sizing instruments (TSI SMPS, TSI EEPS, and Cambustion DMS 500) were found to be in general agreement in terms of size distributions and concentrations with some exceptions. Teflon filter measurements of the total aerosol mass produced by the various DFCASs differed from the reference EC, BC, and integrated particle sized distribution measured aerosol masses. The Teflon filter measured mass was 30 to 40% greater than the reference EC and 50 to 60% greater than the BC mass for the J85 in both test campaigns. The measurements of particle size distributions and single particle analysis by miniSPLAT indicated the presence of large particles (>100 nm) having more compact morphologies, higher effective density, and a composition dominated by OC and ash. This increased large particle fraction is also associated with higher values of single scattering albedo measured by the CAPS PMSSA instrument and higher OC/EC measurements. These measurements indicate gas turbine engine emissions can be a more heterogeneous mix of particle types beyond the original E31 assumption that it is mainly composed of black carbon.

33 ADVANCED PROPULSION SYSTEMS↗

Effects of alpha-zirconium phosphate on thermal degradation and flame retardancy of transparent intumescent fire protective coating

Graphical abstract: - Highlights: • A transparent intumescent fire protective coating was obtained by UV-cured technology. • OZrP could enhance the thermal stability and anti-oxidation of the coating. • OZrP could reduce the combustion properties of the coatings. - Abstract: Organophilic alpha-zirconium phosphate (OZrP) was used to improve the thermal and fire retardant behaviors of the phenyl di(acryloyloxyethyl)phosphate (PDHA)-triglycidyl isocyanurate acrylate (TGICA)-2-phenoxyethyl acrylate (PHEA) (PDHA-TGICA-PHEA) coating. The morphology of nanocomposite coating was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The effect of OZrP on the flame retardancy, thermal stability, fireproofing time and char formation of the coatings was investigated by microscale combustion calorimeter (MCC), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), laser Raman spectroscopy (LRS) and scanning electric microscope (SEM). The results showed that by adding OZrP, the peak heat release rate and total heat of combustion were significantly reduced. The highest improvement was achieved with 0.5 wt% OZrP. XPS analysis indicated that the performance of anti-oxidation of the coating was improved with the addition of OZrP, and SEM images showed that a good synergistic effect was obtained through a ceramic-like layer produced by OZrP covered on the surface of char.

36 MATERIALS SCIENCE↗

Poly(methyl methacrylate)/layered zinc sulfide nanocomposites: Preparation, characterization and the improvements in thermal stability, flame retardant and optical properties

Highlights: • Layered zinc sulfide (LZnS) was synthesized successfully via hydrothermal method. • We prepare PMMA/LZnS nanocomposites by in situ bulk polymerization of MMA. • PMMA/LZnS nanocomposites were investigated by TGA, DSC, MCC, UV–vis and PL test. • The thermal stability, flame retardant and optical properties of PMMA are improved. - Abstract: Layered zinc sulfide (LZnS) was synthesized successfully via hydrothermal method and poly(methyl methacrylate) (PMMA)/layered zinc sulfide nanocomposites were obtained by in situ bulk polymerization of methyl methacrylate (MMA). X-ray diffraction (XRD) and transmission electron microscopy (TEM) were used to characterize the as-synthesized layered zinc sulfide and PMMA/layered zinc sulfide nanocomposites. Microscale combustion calorimeter (MCC), differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA) were used to test the thermal properties of the composites. Ultraviolet visible (UV–vis) transmittance spectra and photoluminence (PL) spectra were obtained to investigate the optical properties of the composites. From the results, the thermal degradation temperature is increased by 20–50 °C, the peak of heat release rate (pHRR) and total heat release (THR) are both decreased by above 30%, and the photoluminence intensity is enhanced with the increasing loading of layered zinc sulfide.

36 MATERIALS SCIENCE↗

Species identification in a laminar premixed low-pressure flame of morpholine as a model substance for oxygenated nitrogen-containing fuels

The combustion chemistry of morpholine (1-oxa-4-aza-cyclohexane) was investigated under laminar, premixed low-pressure conditions. Morpholine, as a heterocyclic secondary amine with numerous industrial applications, was studied as it model fuel which simultaneously contains oxygen and nitrogen hetero-atoms. Stable and radical intermediates and products of the combustion process in a slightly fuel-rich Phi = 1.3 (C/O = 0.41) flat premixed morpholine-oxygen-argon flame at 40 mbar (4 kPa) were identified. A detailed fuel destruction scheme is proposed based on combined measurements using two different in situ molecular beam mass spectrometry (MBMS) techniques. The results are discussed with special attention to hydrocarbon, oxygenated and N-containing compounds important in pollutant emission.

10 SYNTHETIC FUELS↗

Human dermal absorption of chlorinated organophosphate flame retardants; implications for human exposure

Tris-2-chloroethyl phosphate (TCEP), tris (1-chloro-2-propyl) phosphate (TCIPP) and tris-1,3-dichloropropyl phosphate (TDCIPP) are organophosphate flame retardants (PFRs) widely applied in a plethora of consumer products despite their carcinogenic potential. Human dermal absorption of these PFRs is investigated for the first time using human ex vivo skin and EPISKIN™ models. Results of human ex vivo skin experiments revealed 28%, 25% and 13% absorption of the applied dose (500 ng/cm{sup 2}, finite dose) of TCEP, TCIPP and TDCIPP, respectively after 24 h exposure. The EPISKIN™ model showed enhanced permeability values (i.e. weaker barrier), that were respectively 16%, 11% and 9% for TCEP, TCIPP and TDCIPP compared to human ex vivo skin. However, this difference was not significant (P > 0.05). Estimated permeability constants (K{sub p}, cm/h) showed a significant negative correlation with log K{sub ow} for the studied contaminants. The effect of hand-washing on dermal absorption of PFRs was investigated. Washing reduced overall dermal absorption, albeit to varying degrees depending on the physicochemical properties of the target PFRs. Moreover, slight variations of the absorbed dose were observed upon changing the dosing solution from acetone to 20% Tween 80 in water, indicating the potential influence of the dose vehicle on the dermal absorption of PFRs. Finally, estimated dermal uptake of the studied PFRs via contact with indoor dust was higher in UK toddlers (median ΣPFRs = 36 ng/kg bw day) than adults (median ΣPFRs = 4 ng/kg bw day). More research is required to fully elucidate the toxicological implications of such exposure. - Highlights: • Human dermal absorption of PFRs was studied using human ex vivo skin and EPISKIN™. • Absorbed fractions of TCEP, TCIPP and TDCIPP were 28%, 25% and 13% of applied dose. • Permeability constants showed significant negative correlation to log K{sub ow} of PFRs. • Skin washing reduced the overall dermal absorption of target PFRs to varying degrees. • Toddlers are more exposed to PFRs via dermal contact with indoor dust than adults.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Monitoring of WEEE plastics in regards to brominated flame retardants using handheld XRF

Highlights: • Specification of an empirical factor for conversion from bromine to PBB and PBDE. • The handheld XRF device was validated for this particular application. • A very large number of over 4600 pieces of monitor housings was analysed. • The recyclable fraction mounts up to 85% for TV but only 53% of PC waste plastics. • A high percentage of pieces with bromine contents of over 50,000 ppm was obtained. - Abstract: This contribution is focused on the on-site determination of the bromine content in waste electrical and electronic equipment (WEEE), in particular waste plastics from television sets (TV) and personal computer monitors (PC) using a handheld X-ray fluorescence (XRF) device. The described approach allows the examination of samples in regards to the compliance with legal specifications for polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) directly after disassembling and facilitates the sorting out of plastics with high contents of brominated flame retardants (BFRs). In all, over 3000 pieces of black (TV) and 1600 pieces of grey (PC) plastic waste were analysed with handheld XRF technique for this study. Especially noticeable was the high percentage of pieces with a bromine content of over 50,000 ppm for TV (7%) and PC (39%) waste plastics. The applied method was validated by comparing the data of handheld XRF with results obtained by GC–MS. The results showed the expected and sufficiently accurate correlation between these two methods. It is shown that handheld XRF technique is an effective tool for fast monitoring of large volumes of WEEE plastics in regards to BFRs for on-site measurements.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗