Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLUID MEASUREMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Experimental and Computational Study of Weld Drop-Through Hydraulic Effects in Multi-Layer Concentric Pipes Servicing Cryogenic Liquid Hydrogen

The Cryogenic Moderator System (CMS) at the Oak Ridge National Laboratory (ORNL)-Spallation Neutron Source (SNS) supplies liquid hydrogen, through vacuum insulated transfer lines to the moderators. The welding process used to make the transfer lines produces weld drop-through, which can constrict the flow of hydrogen and/or cause thermal bridges between adjacent layers. To ensure proper operation of the CMS it is therefore necessary to conduct a flow test to verify the pressure drop caused by the welds. Measurements in as-built piping sections intended to provide liquid hydrogen service to the SNS-CMS system were performed to test the effect of weld penetrations into the fluid flow area focusing on pressure drop effects. The reference test sections were designed using prototypical piping dimensions, materials and expected penetration welds. A numerical study using Computational Fluid Dynamics (CFD) tools in the transfer lines provided a conversion factor from the pressure drop measured in the lines with water to the expected pressure drop using liquid cryogenic hydrogen. The results show evidence of a maximum pressure drop modification in water of 78 KPa in the tested parts, which scales to liquid hydrogen as PHydrogen = 5.2 KPa. The maximum measured equivalent blockage area percentage was found in the as-built TDM transfer line spool 2 with a value of 31%. The measured values obtained in the as-built transfer lines provided accurate values to estimate the expected total pressure drop in the CMS system providing operational limits for the current recirculatory capacity. The effect of the weld drop-through in hydrogen evacuation capacity scenarios was better evaluated as a result of this study.

Dominguez-Ontiveros, Elvis [ORNL] (ORCID:000000018↗

The general low-frequency prediction for asymptotically nonlinear material functions in oscillatory shear

We use a fourth-order fluid expansion to make general predictions for asymptotically nonlinear material functions in oscillatory shear, a characterization protocol sometimes known as medium-amplitude oscillatory shear. The calculation applies to any viscoelastic fluid in the terminal regime defined by the limit of Deborah number much less than one. Two viscous nonlinearities appear at third order, with shear stress scaling as ω 3 , and are interrelated by a constant multiplicative factor. Two elastic nonlinearities appear at fourth order, with shear stress scaling as ω 4 , and are also interrelated by a constant multiplicative factor. These nonlinear measures are decoupled from the linear material functions G' and G" because they depend on different expansion coefficients. Experimental measurements are presented for all four asymptotic shear material functions using a linear and well-entangled homopolymer of polyisoprene. Here, the experimental observations are consistent with both the predicted frequency scaling and the predicted interrelations in the terminal regime. Signs and magnitudes cannot be universally predicted, leaving these as free parameters that depend on the specifics of the material microstructure or constitutive model. These general results explain previous observations involving different materials and constitutive models, and provide an important reference for future experiments, analytical results, and numerical computations of these rheological fingerprints.

42 ENGINEERING↗

Particle Image Velocimetry Measurements and Analysis of Bypass Data for a Scaled 6mm Gap

The purpose of the fluid dynamics experiments in the MIR (Matched Index of-Refraction) flow system at Idaho National Laboratory (INL) is to develop benchmark databases for the assessment of Computational Fluid Dynamics (CFD) solutions of the momentum equations, scalar mixing, and turbulence models for the flow ratios between coolant channels and bypass gaps in the interstitial regions of typical prismatic standard fuel element (SFE) or upper reflector block geometries of typical Modular High-temperature Gas-cooled Reactors (MHTGR) in the limiting case of negligible buoyancy and constant fluid properties. The experiments will use optical techniques, primarily particle image velocimetry (PIV) in the INL Matched Index of Refraction (MIR) flow system.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

On the Response of a Herschel–Bulkley Fluid Due to a Moving Plate

In this paper, we study the boundary-layer flow of a Herschel–Bulkley fluid due to a moving plate; this problem has been experimentally investigated by others, where the fluid was assumed to be Carbopol, which has similar properties to cement. The computational fluid dynamics finite volume method from the open-source toolbox/library OpenFOAM is used on structured quad grids to solve the mass and the linear momentum conservation equations using the solver “overInterDyMFoam” customized with non-Newtonian viscosity libraries. The governing equations are solved numerically by using regularization methods in the context of the overset meshing technique. The results indicate that there is a good comparison between the experimental data and the simulations. The boundary layer thicknesses are predicted within the uncertainties of the measurements. The simulations indicate strong sensitivities to the rheological properties of the fluid.

36 MATERIALS SCIENCE↗

Cardiovascular dynamics during the initial period of head-down tilt

The cardiovascular response to 1 h of 60-deg head-down tilt was studied in 12 male subjects, ages 30-39 years, to simulate the early effects of weightlessness. Fluid shifts, hemodynamic variables, and indices of myocardial contractility were evaluated by utilizing electrocardiography, systolic time intervals, impedance cardiography, sphygmomanometry, and measurement of calf circumference. Most cardiovascular variables remained stable throughout the initial 30 min of the protocol, even though translocation of fluid from the legs to the thorax commenced immediately with the onset of head-down tilt. In contrast, minutes 30-60 were characterized by reduced stroke volume, cardiac output, mean stroke ejection rate, and Heather index concomitant with an elevation in mean arterial pressure. Intrathoracic fluid volume continued to increase, while leg volume continued to decrease. This latter physiological response suggests intrathoracic sequestration of fluid volume; blood was apparently redistributed to the pulmonary circulation rather than being retained in the great veins.

Tomaselli, Clare Marie↗

Shadowgraphy of transcritical cryogenic fluids

The future of liquid-rocket propulsion depends heavily on continued development of high pressure liquid oxygen/hydrogen systems that operate near or above the propellant critical states; however, current understanding of transcritical/supercritical injection and combustion is yet lacking. The Phillips Laboratory and the United Technologies Research Center are involved in a collaborative effort to develop diagnostics for and make detailed measurements of transcritical droplet vaporization and combustion. The present shadowgraph study of transcritical cryogenic fluids is aimed at providing insight into the behavior of liquid oxygen or cryogenic stimulants as they are injected into a supercritical environment of the same or other fluids. A detailed history of transcritical injection of liquid nitrogen into gaseous nitrogen at reduced pressures of 0.63 (subcritical) to 1.05 (supercritical) is provided. Also, critical point enhancement due to gas phase solubility and mixture effects is investigated by adding helium to the nitrogen system, which causes a distinct liquid phase to re-appear at supercritical nitrogen pressures. Liquid oxygen injection into supercritical argon or nitrogen, however, does not indicate an increase in the effective critical pressure of the system.

Woodward, R. D.↗

Some limitations in applying classical EHD film thickness formulas to a high-speed bearing

Elastohydrodynamic film thickness was measured for a 20-mm ball bearing using the capacitance technique. The bearing was thrust loaded to 90, 448, and 778 N. The corresponding maximum stresses on the inner race were 1.28, 2.09, and 2.45 GPa. Test speeds ranged from 400 to 14,000 rpm. Film thickness measurements were taken with four different lubricants: (a) synthetic paraffinic, (b) synthetic paraffinic with additives, (c) neopentylpolyol (tetra) ester meeting MIL-L-23699A specifications, and (d) synthetic cycloaliphatic hydrocarbon traction fluid. The test bearing was mist lubricated. Test temperatures were 300, 338, and 393 K. The measured results were compared to theoretical predictions using the formulas of Grubin, Archard and Cowking, Dowson and Higginson, and Hamrock and Dowson. There was good agreement with theory at low dimensionless speed, but the film was much smaller than theory predicts at higher speeds. This was due to kinematic starvation and inlet shear heating effects.

Coy, J. J.↗

Analysis of erosion/corrosion data for high-level waste pipelines at Hanford - 15519

Washington River Protection Solutions (WRPS) has implemented a fitness-for-service program which will evaluate the degraded condition of the tank farm waste transfer system. The Tank Farms Waste Transfer System Fitness-for-Service Requirements and Recommendations, includes a requirement to inspect primary piping, encasements, and jumpers for corrosion/erosion. The 242-A Evaporator pump room was upgraded by adding instrumentation to the feed and return jumpers, prior to running the next campaign. As part of this upgrade, several jumpers were removed for disposal and a total of five jumpers were selected for ultrasonic thickness (UT) inspection. The jumpers selected were the following: 18-4, C-4 and 5, J-13A, 13-K, and 19-5. All of these jumpers will be removed permanently except for jumper 19-5 which will be reinstalled for further service. As part of this study, several jumpers from the AW-02E Feed Pit were also removed for disposal and two were selected for UT inspection. The jumpers selected were the 1-4 and B-2 which were packaged and sent to the 222-S Laboratory for UT assessments. This paper includes details of each jumper as well as the estimated remaining useful life (ERUL), if applicable, for its components based on the wall thinning measured in elbows and straight sections. The jumper's ultrasonic thickness measurements are plotted and trends are assessed based on the volume of fluid transferred or time of service. Variability in thickness is generally evaluated in two approaches, radially around the circumference of the pipe or component and longitudinally along the length. The paper also explains the analysis procedure for evaluating the different components. In particular, issues related to thinning from manufacturing different types of elbows (long radius, five diameter bend radius) are presented. Analysis techniques are developed for elbows that differentiate thinning from erosion/corrosion and manufacturing which is critical for this analysis. Results demonstrate that in most components, the thickness measurements are still greater than the manufactured nominal thickness. For the cases in which the thickness is below the nominal thickness, the ERUL well exceeds the life needed for servicing the Waste Treatment Plant. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Some observations concerning near-wall PTV measurements

In conjunction with an experimental study of entropy generation in bypass-transitional boundary layers, some considerations in the application of particle tracking velocimetry (PTV) have been examined. Treated are ideas on desirable spatial resolution, uncertainties in PTV algorithms and other uncertainties which may dominate plus the deduction of mean wall shear stress (or friction velocity) from mean velocity profiles determined with near-wall PTV.

47 OTHER INSTRUMENTATION↗

Thermophysical Property Measurements on Salt Mixture

Thermal conductivity, specific heat, viscosity, and density are critical properties for understanding thermal hydraulics of heat transfer fluids (HTFs) like molten salts. These properties are important for design and safe operation of any HTF loop. These characterizations are required to benchmark computational chemical models that are used to predict properties, but existent data are limited. These measurements are extremely difficult to make due to the operating temperature range and corrosive properties of the salt.Density measurements are needed to predict volumetric behavior. Thermal expansion mismatches can cause mechanical failure of structural materials and important components that are in contact with the molten salt. All of these properties are related to heat transfer in HTFs. The heat generated in a reactor must be high enough to derive power; however it should not be so hot that it cannot be safely removed via the HTF at an appropriate rate. It is important to understand the thermal hydraulics required to operate at the desired power generation level and to avoid situations in which thermal shifts can damage components,cause failure of structural materials, and/or lead to accidents. Understanding these thermal properties can aid in component and process design and can contribute to optimized operational and safety parameters.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Capillary pressure – saturation relationships for gas shales measured using a water activity meter

Hydraulic fracturing of gas shale formations involves pumping a large volume of fracking fluid into a hydrocarbon reservoir to fracture the rock and thus increase its permeability. The majority of the fracking fluid introduced is never recovered and the fate of this lost fluid, often called “leak off,” has become the source of much debate. Information on the capillary pressure – saturation relationship for each wetting phase is needed to simulate leak off using numerical reservoir models. The petroleum industry commonly employs air – water capillary pressure – saturation curves to predict these relationships for mixed wet reservoirs. Traditional methods of measuring this curve are unsuitable for gas shales due to high capillary pressures associated with the small pores present. Still, a possible alternative method is the water activity meter which is used widely in the soil sciences for such measurements. However, its application to lithified material has been limited. Here, this study utilized a water activity meter to measure air – water capillary pressures (ranging from 1.3 to 219.6 MPa) at several water saturation levels in both the wetting and drying directions. Water contents were measured gravimetrically. Seven types of gas producing shale with different porosities (2.5–13.6%) and total organic carbon contents (0.4–13.5%) were investigated. Nonlinear regression was used to fit the resulting capillary pressure – water saturation data pairs for each shale type to the Brooks and Corey equation. Data for six of the seven shale types investigated were successfully fitted (median R 2 = 0.93), indicating this may be a viable method for parameterizing capillary pressure – saturation relationships for inclusion in numerical reservoir models. As expected, the different shale types had statistically different Brooks and Corey parameters. However, there were no significant differences between the Brooks and Corey parameters for the wetting and drying measurements, suggesting that hysteresis may not need to be taken into account in leak off simulations.

54 ENVIRONMENTAL SCIENCES↗

Viscosity and thermal conductivity of nanofluids containing multi-walled carbon nanotubes stabilized by chitosan

Thermal conductivity, viscosity, and stability of nanofluids containing multi-walled carbon nanotubes (MWCNTs) stabilized by cationic chitosan were studied. Chitosan with weight fraction of 0.1%, 0.2 wt%, and 0.5 wt% was used to disperse stably MWCNTs in water. The measured thermal conductivity showed an enhancement from 2.3% to 13% for nanofluids that contained from 0.5 wt% to 3 wt% MWCNTs (0.24 to 1.43 vol %). These values are significantly higher than those predicted using the Maxwell's theory. We also observed that the enhancements were independent of the base fluid viscosity. Thus, use of microconvection effect to explain the anomalous thermal conductivity enhancement should be reconsidered. MWCNTs can be used either to enhance or reduce the fluid base viscosity depending on the weight fractions. In the viscosity-reduction case, a reduction up to 20% was measured by this work. In the viscosity-enhancement case, the fluid behaved as a non-Newtonian shear-thinning fluid. By assuming that MWCNT nanofluids behave as a generalized second grade fluid where the viscosity coefficient depends upon the rate of deformation, a theoretical model has been developed. The model was found to describe the fluid behavior very well.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Viscosity and termal conductivity of nanofluids containing mult-walled carbon nanotubes stabilized by chitosan.

Thermal conductivity, viscosity, and stability of nanofluids containing multi-walled carbon nanotubes (MWCNTs) stabilized by cationic chitosan were studied. Chitosan with weight fraction of 0.1%, 0.2 wt%, and 0.5 wt% was used to disperse stably MWCNTs in water. The measured thermal conductivity showed an enhancement from 2.3% to 13% for nanofluids that contained from 0.5 wt% to 3 wt% MWCNTs (0.24 to 1.43 vol %). These values are significantly higher than those predicted using the Maxwell's theory. We also observed that the enhancements were independent of the base fluid viscosity. Thus, use of microconvection effect to explain the anomalous thermal conductivity enhancement should be reconsidered. MWCNTs can be used either to enhance or reduce the fluid base viscosity depending on the weight fractions. In the viscosity-reduction case, a reduction up to 20% was measured by this work. In the viscosity-enhancement case, the fluid behaved as a non-Newtonian shear-thinning fluid. By assuming that MWCNT nanofluids behave as a generalized second grade fluid where the viscosity coefficient depends upon the rate of deformation, a theoretical model has been developed. The model was found to describe the fluid behavior very well.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Measuring ground movement in geothermal areas of Imperial Valley, California

Significant ground movement may accompany the extraction of large quantities of fluids from the subsurface. In Imperial Valley, California, one of the potential hazards of geothermal development is the threat of both subsidence and horizontal movement of the land surface. Regional and local survey nets are being monitored to detect and measure possible ground movement caused by future geothermal developments. Precise measurement of surface and subsurface changes will be required to differentiate man-induced changes from natural processes in this tectonically active region.

Lofgren, B. E.↗

Calibration Probe Uncertainty and Validation for the Hypersonic Material Environmental Test System

This paper presents an uncertainty analysis of the stagnation-point calibration probe surface predictions for conditions that span the performance envelope of the Hypersonic Materials Environmental Test System facility located at NASA Langley Research Center. A second-order stochastic expansion was constructed over 47 uncertain parameters to evaluate the sensitivities, identify the most significant uncertain variables, and quantify the uncertainty in the stagnation-point heat flux and pressure predictions of the calibration probe for a low- and high-enthalpy test condition. A sensitivity analysis showed that measurement bias uncertainty is the most significant contributor to the stagnation-point pressure and heat flux variance for the low-enthalpy condition. For the high-enthalpy condition, a paradigm shift in sensitivities revealed the computational fluid dynamics model input uncertainty as the main contributor. A comparison between the prediction and measurement of the stagnation-point conditions under uncertainty showed that there was evidence of statistical disagreement. A validation metric was proposed and applied to the prediction uncertainty to account for the statistical disagreement when compared to the possible stagnation-point heat flux and pressure measurements.

Brune, Andrew J.↗

MR/PET quantification tools: Registration, segmentation, classification, and MR-based attenuation correction

Purpose: Combined MR/PET is a relatively new, hybrid imaging modality. A human MR/PET prototype system consisting of a Siemens 3T Trio MR and brain PET insert was installed and tested at our institution. Its present design does not offer measured attenuation correction (AC) using traditional transmission imaging. This study is the development of quantification tools including MR-based AC for quantification in combined MR/PET for brain imaging. Methods: The developed quantification tools include image registration, segmentation, classification, and MR-based AC. These components were integrated into a single scheme for processing MR/PET data. The segmentation method is multiscale and based on the Radon transform of brain MR images. It was developed to segment the skull on T1-weighted MR images. A modified fuzzy C-means classification scheme was developed to classify brain tissue into gray matter, white matter, and cerebrospinal fluid. Classified tissue is assigned an attenuation coefficient so that AC factors can be generated. PET emission data are then reconstructed using a three-dimensional ordered sets expectation maximization method with the MR-based AC map. Ten subjects had separate MR and PET scans. The PET with [{sup 11}C]PIB was acquired using a high-resolution research tomography (HRRT) PET. MR-based AC was compared with transmission (TX)-based AC on the HRRT. Seventeen volumes of interest were drawn manually on each subject image to compare the PET activities between the MR-based and TX-based AC methods. Results: For skull segmentation, the overlap ratio between our segmented results and the ground truth is 85.2 ± 2.6%. Attenuation correction results from the ten subjects show that the difference between the MR and TX-based methods was <6.5%. Conclusions: MR-based AC compared favorably with conventional transmission-based AC. Quantitative tools including registration, segmentation, classification, and MR-based AC have been developed for use in combined MR/PET.

60 APPLIED LIFE SCIENCES↗

Hierarchical Membrane Dynamics in Phase-Separated Model Membranes

Lipid membranes, the primary matrix of cell membranes, exhibit a hierarchy of dynamics from molecular motions to collective undulations, which control spatiotemporal membrane phenomena and regulate various cellular functions. Thus, understanding how various dynamic modes influence membrane behavior is crucial to uncovering the design rules of cell membranes and implementing them in future technologies. Previous membrane dynamics studies using neutron spin-echo spectroscopy (NSE) have shed light on the dependence of collective membrane fluctuations on viscoelastic membrane properties, demonstrating that thickness fluctuation modes (100ns) are dictated by membrane viscosity, which directly governs fast (ps) molecular diffusive motions. Here, we focus on phase-separating lipid membranes, composed of DMPC:DSPC mixtures, to understand the effect of domain formation/growth on hierarchical matrix dynamics using selective lipid deuteration and different neutron spectroscopy techniques. NSE measurements on DMPC:DSPC-d83 (70:30 mol%) show that bending rigidity of the DMPC-rich matrix graduallyincreases with decreasing temperature - as the fully-fluid membrane approaches the upper phase transition (i.e. with the formation of transient DSPC clusters) - and increases further in the phase coexistence region with the growth of DSPC domains. Comparatively, NSE measurements on DMPC-d54:DSPC-d83 vesicles show pronounced matrix thickness fluctuations in the fully-fluid phase and drastic suppression of this fluctuation mode in the gel-fluid coexistence phase, even when the DMPC-rich matrix is still in its fluid phase. This suppression in fluctuations suggests an increase in the matrix viscosity with the growth of gel DSPC domains, which is further investigated by selectively measuring lipid diffusion in the DMPC-rich matrix using neutron backscattering spectroscopy. Comparisons of the experimental results with coarse-grained MD simulationsillustrate the underlying coupling mechanisms. Overall, these observations indicate a clear mechanical and viscoelastic coupling betweenlipid domains and their host matrix, suggesting that domain formation influences membrane properties beyond local effects.

Carrillo, Jan Michael↗