Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLUID MEASUREMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Estimating diffusion coefficients of shale oil, gas, and condensate with nano-confinement effect

Molecular diffusion plays an important role in oil and gas migration in tight shale formations. However, there are insufficient reference data in the literature to specify the diffusion coefficients within porous media. This study aims at calculating diffusion coefficients of shale gas, shale condensate, and shale oil at reservoir conditions with CO 2 injection for EOR/EGR. The large nano-confinement effects including large gas-oil capillary pressure and critical property shifts could alter the phase behaviors. This paper estimates the diffusivities of shale fluids in nanometer-scale shale rock from two perspectives: 1) examining the shift of diffusivity caused by nanopore confinement effects from phase change (phase composition and fluid property) perspective, and 2) calculating the effective diffusion coefficient in porous media by incorporating rock intrinsic properties (porosity and tortuosity factor). The tortuosity is obtained by using tortuosity-porosity relations as well as the measured tortuosity of shale from 3D imaging techniques. The results indicated that nano-confinement effects could affect the diffusion coefficient through altering the phase properties, such as phase compositions and densities. Compared to bulk phase diffusivity, the effective diffusion coefficient in porous shale rock is reduced by 10 2 to 10 4 times as porosity decreases from 0.1 to 0.03.

04 OIL SHALES AND TAR SANDS↗

Pushing the limits: Resolving paleoseawater signatures in nanoscale fluid inclusions by atom probe tomography

New insight into the geochemistry of ancient environments can be gained through structural and chemical analyses of nanometer-scale features within minerals. Here, we present recent developments using atom probe tomography (APT) enabling direct visualization of nanoscale fluid inclusions trapped within pyrite (FeS 2 ) and thereby chemical characterization of remnant seawater. Pyrite framboids (spherical clusters of nanocrystals) were sampled from the Middle Devonian Leicester Pyrite Member (New York). Scanning transmission electron microscopy shows low density regions distributed within the pyrite consistent with nanoscale pores (<4 nm in size). APT 3D visualization and compositional mapping reveals that the nanopores are filled with water. The inclusions appear to preserve the elemental signature of the water column in which the framboids formed, specifically seawater components including Na, K, Mg, and Ca. Mg/Ca ratios within the pyrite were generally measured to be within 0.6±0.2 – consistent with calcite-dominated seawater conditions existing in the Middle Devonian. Furthermore, this study demonstrates the potential for a novel approach to reconstruct paleoenvironmental conditions from coupled elemental and structural analyses of nanoscale fluid inclusions.

54 ENVIRONMENTAL SCIENCES↗

Interactions of vortices with a flexible beam with applications in fluidic energy harvesting

A cantilever piezoelectric beam immersed in a flow and subjected to naturally occurring vortices such as those formed in the wake of bluff bodies can be used to generate electrical energy harvested in fluid flows. In this paper, we present the pressure distribution and deflection of a piezoelectric beam subjected to controlled vortices. A custom designed experimental facility is set up to study the interaction of individual and multiple vortices with the beam. Vortex tori are generated by an audio speaker and travel at controlled rates over the beam. Particle image velocimetry is used to measure the 2-D flow field induced by each vortex and estimate the effect of pressure force on the beam deflection.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Large-scale energy balance and MHD turbulence in solar coronal structures

The energy balance at large scales in a coronal loop is studied, using an analytical model. We generalize a previous model by including a longitudinal inhomonegeity in the background density. The dynamics is regulated by the resonance between motions at the loop basis and eigenmodes, giving rise to energy storage within the loop, and by nonlinear effects that move this energy to smaller scales. We derive a scaling law for the input energy flux, the properties of eigenmodes and of their nonlinear coupling, and estimations for the nonlinear flux and for the velocity perturbation. For typical loop conditions, the resulting values are in accordance with the energy flux required for the quiet-Sun corona and with measured nonthermal velocities.

79 ASTRONOMY AND ASTROPHYSICS↗

GAS CLUMPING IN THE OUTSKIRTS OF {Lambda}CDM CLUSTERS

Recent Suzaku X-ray observations revealed that the observed entropy profile of the intracluster medium (ICM) deviates significantly from the prediction of hydrodynamical simulations of galaxy clusters. In this work, we show that gas clumping introduces significant biases in X-ray measurements of the ICM profiles in the outskirts of galaxy clusters. Using hydrodynamical simulations of galaxy cluster formation in a concordance {Lambda}CDM model, we demonstrate that gas clumping leads to an overestimate of the observed gas density and causes flattening of the entropy profile. Our results suggest that gas clumping must be taken into account when interpreting X-ray measurements of cluster outskirts.

79 ASTRONOMY AND ASTROPHYSICS↗

A High Resolution Simulation of a Single Shock-Accelerated Particle

We report particle drag models, which capture macroviscous and pressure effects, have been developed over the years for various flow regimes to enable cost effective simulations of particle-laden flows. The relatively recent derivation by Maxey and Riley has provided an exact equation of motion for spherical particles in a flow field based on the continuum assumption. Many models that have been simplified from these equations have provided reasonable approximations; however, the sensitivity of particle-laden flows to particle drag requires a very accurate model to simulate. To develop such a model, a two-dimensional axisymmetric Navier–Stokes direct numerical simulation of a single particle in a transient, shock-driven flow field was conducted using the hydrocode FLAG. FLAGs capability to run arbitrary Lagrangian-Eulerian hydrodynamics coupled with solid mechanic models makes it an ideal code to capture the physics of the flow field around and in the particle as it is shock-accelerated—a challenging regime to study. The goal of this work is twofold: to provide a validation for FLAGs Navier–Stokes and heat diffusion solutions and to provide a rationale for recent experimental particle drag measurements.

42 ENGINEERING↗

Hierarchical calibration and validation framework of bench-scale computational fluid dynamics simulations for solvent-based carbon capture. Part 2: Chemical absorption across a wetted wall column: Original Research Article: Hierarchical calibration and validation framework of bench-scale computational fluid dynamics simulations

Part 1 of this paper presents a numerical model for non-reactive physical mass transfer across a wetted wall column (WWC). In Part 2, we improved the existing computational fluid dynamics (CFD) model to simulate chemical absorption occurring in a WWC as a bench-scale study of solvent-based carbon dioxide (CO 2 ) capture. In this study, to generate data for WWC model validation, CO 2 mass transfer across a monoethanolamine (MEA) solvent was first measured on a WWC experimental apparatus. The numerical model developed in this work can account for both chemical absorption and desorption of CO 2 in MEA. In addition, the overall mass transfer coefficient predicted using traditional/empirical correlations is conducted and compared with CFD prediction results for both steady and wavy falling films. A Bayesian statistical calibration algorithm is adopted to calibrate the reaction rate constants in chemical absorption/desorption of CO 2 across a falling film of MEA. The posterior distributions of the two transport properties, i.e., Henry's constant and gas diffusivity in the non-reacting nitrous oxide (N 2 O)/MEA system obtained from Part 1 of this study, serves as priors for the calibration of CO 2 reaction rate constants after using the N 2 O/CO 2 analogy method. Finally, the calibrated model can be used to predict the CO 2 mass transfer in a WWC for a wider range of operating conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of dissolved salts and impurities on seawater on heat transfer and fluid flow through fuel channels and debris bed

This project aims to better understand this mechanism and its effect on heat transfer. Specifically, experimental research was conducted to investigate the long term coolability issues in scaled test setups. Advanced diagnostic and measurement techniques were investigated and incorporated into an annular test facility and a debris bed test facility. The diagnostic techniques investigated included: radioactively tagged salt solution, Frisch collar radiation detector array, neutron and x-ray imaging systems, and a Rayleigh backscatter-based fiber-optic temperature system. Models were checked against the in-situ experimental data and recommendations were made for modeling purposes.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Measure Guideline: Optimizing the Configuration of Flexible Duct Junction Boxes

This measure guideline offers additional recommendations to heating, ventilation, and air conditioning (HVAC) system designers for optimizing flexible duct, constant-volume HVAC systems using junction boxes within Air Conditioning Contractors of America (ACCA) Manual D guidance. IBACOS used computational fluid dynamics software to explore and develop guidance to better control the airflow effects of factors that may impact pressure losses within junction boxes among various design configurations. These recommendations can help to ensure that a system aligns more closely with the design and the occupants' comfort expectations. Specifically, the recommendations described herein show how to configure a rectangular box with four outlets, a triangular box with three outlets, metal wyes with two outlets, and multiple configurations for more than four outlets. Designers of HVAC systems, contractors who are fabricating junction boxes on site, and anyone using the ACCA Manual D process for sizing duct runs will find this measure guideline invaluable for more accurately minimizing pressure losses when using junction boxes with flexible ducts.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Fourier-domain study of drift turbulence driven sheared flow in a laboratory plasma

Frequency-resolved nonlinear internal and kinetic energy transfer rates have been measured in the Controlled Shear Decorrelation Experiment (CSDX) linear plasma device using a recently developed technique [Xu et al., Phys. Plasmas 16, 042312 (2009)]. The results clearly show a net kinetic energy transfer into the zonal flow frequency region, consistent with previous time-domain observations of turbulence-driven shear flows [Tynan et al., Plasma Phys. Controlled Fusion 48, S51 (2006)]. The experimentally measured dispersion relation has been used to map the frequency-resolved energy transfer rates into the wave number domain, which shows that the shear flow drive comes from midrange (k{sub t}hetarho{sub S}>0.3) drift fluctuations, and the strongest flow drive comes from k{sub t}hetarho{sub S}approx =1 fluctuations. Linear growth rates have been inferred from a linearized Hasegawa-Wakatani model [Hasegawa et al., Phys. Fluids 22, 2122 (1979)], which indicates that the m=0 mode is linearly stable and the m=1-10 modes (corresponding to k{sub t}hetarho{sub S}>0.3) are linearly unstable for the n=1 and n=2 radial eigenmodes. This is consistent with our energy transfer measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

TH-AB-209-09: Quantitative Imaging of Electrical Conductivity by VHF-Induced Thermoacoustics

Purpose: To demonstrate that very high frequency (VHF) induced thermoacoustics has the potential to provide quantitative images of electrical conductivity in Siemens/meter, much as shear wave elastography provides tissue stiffness in kPa. Quantitatively imaging a large organ requires exciting thermoacoustic pulses throughout the volume and broadband detection of those pulses because tomographic image reconstruction preserves frequency content. Applying the half-wavelength limit to a 200-micron inclusion inside a 7.5 cm diameter organ requires measurement sensitivity to frequencies ranging from 4 MHz down to 10 kHz, respectively. VHF irradiation provides superior depth penetration over near infrared used in photoacoustics. Additionally, VHF signal production is proportional to electrical conductivity, and prostate cancer is known to suppress electrical conductivity of prostatic fluid. Methods: A dual-transducer system utilizing a P4-1 array connected to a Verasonics V1 system augmented by a lower frequency focused single element transducer was developed. Simultaneous acquisition of VHF-induced thermoacoustic pulses by both transducers enabled comparison of transducer performance. Data from the clinical array generated a stack of 96-images with separation of 0.3 mm, whereas the single element transducer imaged only in a single plane. In-plane resolution and quantitative accuracy were measured at isocenter. Results: The array provided volumetric imaging capability with superior resolution whereas the single element transducer provided superior quantitative accuracy. Combining axial images from both transducers preserved resolution of the P4-1 array and improved image contrast. Neither transducer was sensitive to frequencies below 50 kHz, resulting in a DC offset and low-frequency shading over fields of view exceeding 15 mm. Fresh human prostates were imaged ex vivo and volumetric reconstructions reveal structures rarely seen in diagnostic images. Conclusion: Quantitative whole-organ thermoacoustic tomography will be feasible by sparsely interspersing transducer elements sensitive to the low end of the ultrasonic range.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Preliminary characterization of active MEMS valves.

Partial characterization of a series of electrostatically actuated active microfluidic valves is to be performed. Tests are performed on a series of 24 valves from two different MEMS sets. Focus is on the physical deformation of the structures under variable pressure loadings, as well as voltage levels. Other issues that inhibit proper performance of the valves are observed, addressed and documented as well. Many microfluidic applications have need for the distribution of gases at finely specified pressures and times. To this end a series of electrostatically actuated active valves have been fabricated. Eight separate silicon die are discussed, each with a series of four active valves present. The devices are designed such that the valve boss is held at a ground, with a voltage applied to lower contacts. Resulting electrostatic forces pull the boss down against a series of stops, intended to create a seal as well as prevent accidental shorting of the device. They have been uniquely packaged atop a stack of material layers, which have inlaid channels for application of fluid flow to the backside of the valve. Electrical contact is supplied from the underlying printed circuit board, attached to external supplies and along traces on the silicon. Pressure is supplied from a reservoir of house compressed air, up to 100 Psig. This is routed through a Norgren R07-200-RGKA pressure regulator, rated to 150 Psig. From there flow passes a manually operated ball valve, and to a flow meter. Two flow meters were utilized; initially an Omega FMA1802 rated at 10 sccm, and followed by a Flocat model for higher flow rates up to 100 sccm. An Omega DPG4000-500 pressure gauge produced pressure measurements. Optical measurements were returned via a WYKO Interferometry probe station. This would allow for determination of physical deformations of the device under a variety of voltage and pressure loads. This knowledge could lead to insight as to the failure mechanisms of the device, yielding improvements for subsequent fabrications.

47 OTHER INSTRUMENTATION↗

Response of a fluid-immersed microcantilever close to a deformable body

The importance of hydrodynamics upon the response of a microcantilever immersed in a viscous fluid has been well established [J. E. Sader, J. Appl. Phys. 84, 64 (1998); C. A. Eysden and J. E. Sader, J. Appl. Phys. 101, 044908 (2007)]. It has previously been shown that the presence of a nearby rigid planar surface can significantly alter a microcantilever's non-contact response, through microcantilever–surface hydrodynamic interactions [C. P. Green and J. E. Sader, Phys. Fluids 17, 073102 (2005); C. P. Green and J. E. Sader, J. Appl. Phys. 98, 114913 (2005); R. J. Clarke et al., J. Fluid Mech. 545, 397426 (2005); R. J. Clarke et al., Phys. Rev. Lett. 96, 050801 (2006).]. In cases where the nearby surface is a finite-sized deformable body, such as in noncontact microrheology measurements, we expect to see further changes in the microcantilever's response. Hence, we here compute the thermal spectra of several microcantilevers in the presence of different compliant samples that have the characteristics of soft biological fibres. Our findings demonstrate that the elastohydrodynamic regime can substantially dictate the extent to which the compliance of a given body is evident in the microcantilever's thermal spectra, and suggest that certain nondimensional quantities should lie within particular, ranges for this to be the case. We expect these findings to be of interest in areas such as Atomic Force Microscopy, microsensing, and non-contact microrheology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tuning the heat transfer medium and operating conditions in magnetic refrigeration

A new experimental test bed has been designed, built, and tested to evaluate the effect of the system’s parameters on a reciprocating Active Magnetic Regenerator (AMR) near room temperature. Bulk gadolinium was used as the refrigerant, silicon oil as the heat transfer medium, and a magnetic field of 1.3 T was cycled. This study focuses on the methodology of single stage AMR operation conditions to get a high temperature span near room temperature. Herein, the main objective is not to report the absolute maximum attainable temperature span seen in an AMR system, but rather to find the system’s optimal operating conditions to reach that maximum span. The results of this research show that there is a optimal operating frequency, heat transfer fluid flow rate, flow duration, and displaced volume ratio in any AMR system. By optimizing these parameters in our AMR apparatus the temperature span between the hot and cold ends increased by 24%. The optimized values are system dependent and need to be determined and measured for any AMR system by following the procedures that are introduced in this research. It is expected that such optimization will permit the design of a more efficient magnetic refrigeration system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantitative Protein Corona Composition and Dynamics on Carbon Nanotubes in Biological Environments

When nanoparticles enter biological environments, proteins adsorb to form the "protein corona" which alters nanoparticle biodistribution and toxicity. Herein, we measure protein corona formation on DNA-functionalized single-walled carbon nanotubes (ssDNA-SWCNTs), a nanoparticle used widely for sensing and delivery, in blood plasma and cerebrospinal fluid. We characterize corona composition by mass spectrometry, revealing high-abundance corona proteins involved in lipid binding, complement activation, and coagulation. We investigate roles of electrostatic and entropic interactions driving selective corona formation. Lastly, we study real-time protein binding on ssDNA-SWCNTs, obtaining agreement between enriched proteins binding strongly and depleted proteins binding marginally, while highlighting cooperative adsorption mechanisms. Knowledge of protein corona composition, formation mechanisms, and dynamics informs nanoparticle translation from in vitro design to in vivo application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mixing behavior of a model cellulosic biomass slurry during settling and resuspension

Thorough mixing during biochemical deconstruction of biomass is crucial for achieving maximum process yields and economic success. However, due to the complex morphology and surface chemistry of biomass particles, biomass mixing is challenging and currently it is not well understood. This study investigates the bulk rheology of negatively buoyant, non-Brownian α-cellulose particles during settling and resuspension. The torque signal of a vane mixer across two distinct experimental setups (vane-in-cup and vane-in-beaker) was used to understand how mixing conditions affect the distribution of biomass particles. During experimentation, a bifurcated torque response as a function of vane speed was observed, indicating that the slurry transitions from a “settling-dominant” regime to a “suspension-dominant” regime. The torque response of well-characterized fluids (i.e., DI water) were then used to empirically identify when sufficient mixing turbulence was established in each experimental setup. The predicted critical mixing speeds were in agreement with measured values, suggesting that secondary flows are required in order to keep the cellulose particles fully suspended. In addition, a simple scaling relationship was developed to model the entire torque signal of the slurry throughout settling and resuspension. Furthermore, qualitative and semi-quantitative agreement between the model and experimental results was observed.

09 BIOMASS FUELS↗

Development and experimental evaluation of an acoustic flow meter prototype for measuring air flow

Here, this study outlines the development and testing of a flow meter prototype specifically designed for use in nuclear reactor environments. The meter uses flow-induced vibration to measure flow rates and is designed for remote monitoring in harsh environments where radiation can damage electronics. The device generates a vibration signal produced by a feedback system when fluid flows out of an orifice and interacts with a downstream wedge. The frequency of the vibration signal corresponds directly to flow rate and velocity. The study investigates geometric parameters intrinsic to the prototype, such as orifice height, width, edge distance, and chamber length. Different configurations were also tested, including a bypass loop with variable cross-sections around the device. The investigation results reveal the impact of these geometric parameters on the vibration signal output, providing valuable insights for future design improvements and enhancing the effectiveness of flow metering systems used in nuclear reactor applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Three‐Dimensional Magnetic Reconnection Spreading in Current Sheets of Non‐Uniform Thickness

Abstract Magnetic reconnection in naturally occurring and laboratory settings often begins locally and elongates, or spreads, in the direction perpendicular to the plane of reconnection. Previous work has largely focused on current sheets with a uniform thickness, for which the predicted spreading speed for anti‐parallel reconnection is the local speed of the current carriers. We derive a scaling theory of three‐dimensional (3D) spreading of collisionless anti‐parallel reconnection in a current sheet with its thickness varying in the out‐of‐plane direction, both for spreading from a thinner to thicker region and a thicker to thinner region. We derive an expression for calculating the time it takes for spreading to occur for a current sheet with a given profile of its thickness. A key result is that when reconnection spreads from a thinner to a thicker region, the spreading speed in the thicker region is slower than both the Alfvén speed and the speed of the local current carriers by a factor of the ratio of thin to thick current sheet thicknesses. This is important because magnetospheric and solar observations have previously measured the spreading speed to be slower than previously predicted, so the present mechanism might explain this feature. We confirm the theory via a parametric study using 3D two‐fluid numerical simulations. We use the prediction to calculate the time scale for reconnection spreading in Earth's magnetotail during geomagnetic activity. The results are also potentially important for understanding reconnection spreading in solar flares and the dayside magnetopause of Earth and other planets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗