Search NASA⌕ Search

SEARCH · Search NASA

Results for “FOSSIL ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Cryogenic Carbon Capture™ (CCC) Status Report

The Cryogenic Carbon Capture™ (CCC) process separates CO2 from light gases in essentially any continuous process. CCC cools the gases to the frost or desublimation point of CO2 (-100 to -135 °C), separates and pressurizes the solids, and warms all streams to produce a CO2-depleted stream at ambient pressure and a pure (99+%) pressurized liquid CO2 stream typically to about 150 bar, both at ambient temperature. The process also recovers all gas moisture and most gas impurities less volatile than CO2 (NOx, SOx, Hg, PM, UHC, CCC, etc.) in separable streams. CCC nearly eliminates refrigeration energy for sensible temperature changes through heat integration. CCC does require energy to change the CO2 phase from a mixed vapor to a pressurized fluid, which represents the minimum energy required of any process for this separation. CCC uses additional energy for turbomachinery inefficiencies, heat losses, moisture removal and overall process pressure drop. Aside from these real-world energy demands, CCC operates near the minimum energy required to perform this gas separation by minimizing stream recycling. CCC compresses CO2 as a liquid, which is one of several reasons it costs about about half as much and consumes about half as much energy as an amine process when using flue gases with about 15% CO2. The process also has several major additional advantages, including (a) it is a bolt-on retrofit technology that does not need steam or any modification of existing equipment, (b) it recovers water and nearly all pollutants in addition to CO2 from the flue gas, (c) it enables highly efficient and cost effective energy storage at grid scale and on time scales of minutes, (d) it enables NG storage if the energy storage option is used, and (d) it has a small footprint and is minimally disruptive to existing plants, requiring only electrical power and a gas source to operate. Sustainable Energy Solutions (SES) has scaled this technology through several levels, the largest of which captures nominally 1 tonne of CO2/day and is called the skid system. Skid system field tests include utility-scale power plants, cement plants, heating plants, and other utility or industrial sites that burn natural gas, biomass, coal, shredded tires, municipal waste, and combinations of these fuels. These field tests produced 95-99% CO2 capture with CO2 purities of 99+% and initial CO2 contents that range from 4 to 28%. SES currently seeks to scale the system to merchant scale (10-80 tonnes of CO2 per day). In the process of doing so, SES has demonstrated the potential for CCC to contribute to energy storage and direct air capture in innovative and cost-effective ways. This presentation discusses the overall process and highlights results from field and in-house tests. These include (a) measured CO2 capture rates and operating conditions from in-house and field tests, and (b) predicted utility-scale costs and energy demands. This discussion also includes the application of the CCC technology to energy storage and direct air capture.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

Outlook on Industrial Requirements for Incorporating Nuclear Energy into Industrial Processes

There is an increasing interest globally and in the U.S. in decarbonizing heavy industrial processes which have large demands for heat and power. Currently these industries primarily use fossil fuels to meet these demands and they include: oil & gas, petroleum refining, chemicals and derivative products manufacturing, iron & steel production, polymers, ammonia and fertilizers, etc. The U.S. DOE Integrated Energy Systems (IES) program seeks to identify and analyze opportunities for integrating and substituting nuclear energy to fulfil these large heat and power demands in a cost competitive and sustainable manner while reducing carbon emissions of the processes by using clean nuclear power. Presently various representatives from a subset of these industrial companies have expressed interest in evaluating the options of integrating future advanced nuclear small modular reactors with their industries. This study is a scoping study to provide an outlook of industrial energy demands and the potential nuclear energy substitution potential. Future work will analyze in a more detailed manner the potential designs for coupling advanced nuclear reactors with various industries. The industrial processes of oil refining, methanol production, pulp and paper, ammonia and chlorine-alkali are described focusing on how heat and power is used within the facilities in the context of identifying nuclear substitution opportunities. The aim is to provide reliable, competitive, and sustainable energy that is clean while reducing carbon emissions and other environmental impacts such as water withdrawals, consumption, and contamination.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

A life cycle assessment of e-hydrogen production using proton-exchange membrane water electrolysis coupled with desalination in Saudi Arabia

Hydrogen, considered a crucial element in the transition towards a sustainable energy future, offers the potential to mitigate greenhouse gas (GHG) emissions and reduce reliance on fossil fuels. Here, this study explores the viability of hydrogen production using proton exchange membrane water electrolysis (PEMWE) as a key driver of decarbonization within the Vision 2030 framework in the Kingdom of Saudi Arabia. A first-of-a-kind life cycle assessment (LCA) of electrolytic hydrogen (e-hydrogen) production using PEMWE in the Kingdom is performed. As the hydrogen will be produced in a freshwater scarce region, the inclusion of water desalination processes adds an important dimension to the assessment, reflecting the local context and resource availability. Two main renewable energy scenarios are assessed: solar energy through photovoltaics (PV) and wind energy through onshore turbines. The global warming potential (GWP) results indicate a GHG emissions reduction of up to 95 % compared to the state-of-the-art steam methane reforming process if the electrolysis process is powered exclusively by renewable electricity. The scenarios powered by solar and wind energy result in 3.66 and 0.76 kg CO 2 eq/kg H 2 , respectively. The metal depletion is assessed to consider the requirement of rare materials, with a 7.19 × 10 −2 kg Cu eq/kg H 2 for the solar scenario and 2.82 × 10 −2 kg Cu eq/kg H 2 for the wind scenario. A contribution analysis reveals that the majority of emissions in both scenarios originate from the electricity used for electrolysis, with the electrolyser itself contributing minimally. The absolute impact of the water desalination process is the same in both scenarios; however, it appears more prominent in the wind-powered case due to the significantly lower overall emissions in that scenario. The findings underscore the importance of renewable energy integration and process optimization in minimizing environmental impacts and advancing the sustainability of e-hydrogen production.

08 HYDROGEN↗
DOE OSTI2024

Integrating an Ensemble Reward System into an Off-Policy Reinforcement Learning Algorithm for the Economic Dispatch of Small Modular Reactor-Based Energy Systems

Nuclear Integrated Energy Systems (NIES) have emerged as a comprehensive solution for navigating the changing energy landscape. They combine nuclear power plants with renewable energy sources, storage systems, and smart grid technologies to optimize energy production, distribution, and consumption across sectors, improving efficiency, reliability, and sustainability while addressing challenges associated with variability. The integration of Small Modular Reactors (SMRs) in NIES offers significant benefits over traditional nuclear facilities, although transferring involves overcoming legal and operational barriers, particularly in economic dispatch. This study proposes a novel off-policy Reinforcement Learning (RL) approach with an ensemble reward system to optimize economic dispatch for nuclear-powered generation companies equipped with an SMR, demonstrating superior accuracy and efficiency when compared to conventional methods and emphasizing RL’s potential to improve NIES profitability and sustainability. Finally, the research attempts to demonstrate the viability of implementing the proposed integrated RL approach in spot energy markets to maximize profits for nuclear-driven generation companies, establishing NIES’ profitability over competitors that rely on fossil fuel-based generation units to meet baseload requirements.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2017

Biomass co-firing technology with policies, challenges, and opportunities: A global review

The urgency of reducing Greenhouse Gas (GHG) emission is increasing and countries around the world have begun investing a substantial amount of resources into renewable energy sources. Biomass co-firing can have a very influential role in achieving this new energy target as it can reduce the potential environmental impacts associated with the combustion of fossil fuels. Greenhouse gases such as CO 2 , NO x , and SO x emissions can be reduced by replacing a portion of coal with biomass during co-firing. The purpose of this article is to review major policies that have promoted biomass co-firing around the world. Furthermore, this article investigates the existing co-firing plants with technologies and availability of biomass resources in different countries of the world. To conclude, this paper summarizes the major global biomass co-firing initiatives and the prospects of biomass co-firing in securing renewable energy target.

09 BIOMASS FUELS↗
DOE OSTI2022

Conflicts of Greens’ in Renewable Energy Landscapes: Case Studies and a Planning Framework

Reducing greenhouse gas emissions (GHG) through renewable energy deployment is a goal for many cities and nations to mitigate the effects of a rapidly changing climate while securing energy needs. Given national and state level policies on green energy to achieve GHG reduction targets, localities are considering utility-scale renewable energy (USRE) facilities on remote lands, rural areas, oceans, coastal waters and large rivers to meet the energy needs for urban residents and industries. Although these USRE facilities generate much “greener” electricity than fossil fuel power plants, locating them can pose conflicts with wildlife, including endangered, threatened and/or special status species, and the habitats that support wildlife populations (Brunette et al., 2013; Gasparatos et al. 2016; Mulvaney 2017), which lead to a “Conflict of Greens” (Ko et al., 2011). In addition to ecological impacts, conflicts over social and cultural resources in local communities lead to concerns over environmental justice, in this context “energy justice,” where negative environmental, social, and economic impacts of energy projects fall more heavily upon marginalized, vulnerable, or indigenous communities. The Pacific Rim region is a center of major and growing economies, and it has become a battlefield for competing “green” objectives. In addition to progressive renewable energy goals, such as in California, Hawaii, and Taiwan, countries around the Pacific Rim have the majority of the growth in manufacturing of wind and solar energy devices and also some of the highest levels of renewables deployment with China, India, and the US leading the way in wind and solar installations. Developing renewable energy source in the ocean such as offshore wind, tidal, and wave energy, are beginning to add to this mix. Given this challenge, the APRU SCL energy working group provides six case studies that address questions about the “Conflict of Greens” across the Pacific Rim including South Korea, Taiwan, and the United States (California, Hawaii, and Massachusetts). The literature review highlights the emerging ecological, social, and economic aspects of conflicts over siting renewables on the landscape. Using case studies, we examine the trial and errors in least-conflict spatial planning, data collection and analysis, public participation in decision-making, mitigation, social planning for energy transitions, and multi-scalar approaches. Lastly, we recommend interdisciplinary policy, planning, and design actions for sustainable energy landscapes across the Pacific Rim and beyond.

green versus green, renewable energy↗
DOE OSTI2017

Hierarchically Controlled Inside-Out Doping of Mg Nanocomposites for Moderate Temperature Hydrogen Storage

Demand for pragmatic alternatives to carbon–intensive fossil fuels is growing more strident. Hydrogen represents an ideal zero–carbon clean energy carrier with high energy density. For hydrogen fuel to compete with alternatives, safe and high capacity storage materials that are readily cycled are imperative. Here, development of such a material, comprised of nickel–doped Mg nanocrystals encapsulated by molecular–sieving reduced graphene oxide (rGO) layers, is reported. While most work on advanced hydrogen storage composites to date endeavor to explore either nanosizing or addition of carbon materials as secondary additives individually, methods to enable both are pioneered: “dual–channel” doping combines the benefits of two different modalities of enhancement. Specifically, both external (rGO strain) and internal (Ni doping) mechanisms are used to efficiently promote both hydriding and dehydriding processes of Mg nanocrystals, simultaneously achieving high hydrogen storage capacity (6.5 wt% in the total composite) and excellent kinetics while maintaining robustness. Furthermore, hydrogen uptake is remarkably accomplished at room temperature and also under 1 bar—as observed during in situ measurements—which is a substantial advance for a reversible metal hydride material. In conclusion, the realization of three complementary functional components in one material breaks new ground in metal hydrides and makes solid–state materials viable candidates for hydrogen–fueled applications.

08 HYDROGEN↗
DOE OSTI2024

Rational design of semi-interpenetrating network based on hyperbranched polyglycerol grafted MXene/polyurethane–epoxy for compressed hydrogen storage

Here, hydrogen (H 2 ) energy has emerged as a promising alternative in the automotive sector to replace fossil fuel; however, its storage with volumetric efficiency remains a challenge. The latest type IV storage vessel featuring a polymeric liner with composite overwrap incurs hydrogen saturation, which eventually causes failure. To prevent the H 2 dissolution in the liner, we have developed a barrier coating comprised of polyurethane/epoxy semi-interpenetrating network (S-IPN) combined with hyperbranched polyglycerol grafted MXene (h-MXene). The hyperbranched structure facilitated the dispersion of MXene in the coating solution by enhancing the exfoliation and improved the polymer filler interaction by forming covalent and H-bonding through end-terminal hydroxyl groups. Leveraging the dense network of S-IPN combined with the dispersed layer structured h-MXene significantly increased the tortuosity of the spray-coated barrier film applied to the nylon 6 liner. The coating exhibited a 90 % reduction in the H 2 gas permeability at only 2 wt% h-MXene concentration, which further improved to above 98 % at 10 wt% loading. Additionally, the h-MXene considerably improved the adhesion with the liner even in a highly stretched condition, signifying the durability of the coating under cyclic pressurization and depressurization of the storage vessel.

08 HYDROGEN↗
DOE OSTI2025

Numerical Investigation of Susceptor-Catalyst Design for Ethylene Generation in Radio Frequency Based Reactors

Ethylene is the most widely produced petrochemical component in the world. Whether reactors are heated directly or indirectly via steam, manufacturers use economies of scale to overcome inherent thermodynamic inefficiencies when burning fossil fuels. While allowing large-scale operations to use alternative sources of energy and raw materials, new methods of supplying energy to chemical reactor systems can reduce the energy waste produced by conventional processes. One viable method for effectively supplying energy to reactor systems is electromagnetic (EM) induction heating. Using the properties of radio frequency (RF) waves, heterogeneous catalysts can be precisely targeted for heating inside reactors. Site-selective heating can greatly lower the energy requirements of the process by supplying heat to reaction sites while reducing needless heat transfer elsewhere. In this study, a microscale model was used to help create guidelines for susceptors and catalysts to improve ethylene production. The oxidative dehydrogenation of ethane is investigated by utilizing several catalysts and potential catalyst/susceptor combinations, with heat provided by an EM susceptor. Having the susceptors and catalyst function separately results in higher gradients in both heat and mass transfer, which drives transport through the catalyst region, while still providing adequate heating for endothermic reactions. However, using a susceptive core with a catalyst covering produces the maximum ethylene concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Scalable Gas Diffusion Electrode Fabrication for Electrochemical CO 2 Reduction Using Physical Vapor Deposition Methods

Electrochemical CO 2 reduction (ECR) promises the replacement of fossil fuels as the source of feedstock chemicals and seasonal storage of renewable energy. While much progress has been made in catalyst development and electrochemical reactor design, few studies have addressed the effect of catalyst integration on device performance. Using a microfluidic gas diffusion electrolyzer, we systematically studied the effect of thickness and the morphology of electron beam (EB) and magnetron-sputtered (MS) Cu catalyst coatings on ECR performance. We observed that EB-Cu outperforms MS-Cu in current density, selectivity, and energy efficiency, with 400 nm thick catalyst coatings performing the best. Additionally, the superior performance of EB-Cu catalysts is assigned to their faceted surface morphology and sharper Cu/gas diffusion layer interface, which increases their hydrophobicity. Tests in a large-scale zero-gap electrolyzer yielded similar product selectivity distributions with an ethylene Faradaic efficiency of 39% at 200 mA/cm 2 , demonstrating the scalability for industrial ECR applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

High yield production of 3-hydroxypropionic acid using Issatchenkia orientalis

Biomanufacturing provides a more sustainable alternative to fossil-based chemical manufacturing. 3-Hydroxypropionic acid (3HP) is a top Department of Energy value-added chemical and precursor to bioplastics, yet cost-effective microbial production remains elusive. Here, we establish the acid-tolerant yeast Issatchenkia orientalis as a robust host for low-pH 3HP biosynthesis. Genome-scale modeling identifies the β-alanine pathway as optimal, offering the highest theoretical yield and lowest oxygen requirement. Thermodynamic analysis confirms its favorability under acidic conditions. Using sequence similarity network analysis, we discover highly active aspartate 1-decarboxylase (PAND), β-alanine-pyruvate aminotransferase (BAPAT), and 3HP dehydrogenase (YDFG), which significantly improve the pathway efficiency. Next, to further elevate the production, pathway optimization through multi-copy PAND integration, byproduct elimination (knockouts of pyruvate decarboxylase and glycerol-3-phosphate dehydrogenase), and reinforcement of aspartate flux by overexpression of pyruvate carboxylase and aspartate amino transferase improves the titer to 29 g/L in shake flasks. Fed-batch fermentation at pH 4 with low-cost corn steep liquor medium further increases the production to 92 g/L with 0.7 g/g yield and 0.55 g/L/h productivity. Techno-economic analysis indicates that such performance could potentially enable a financially viable process for sustainable acrylic acid production. This work establishes I. orientalis as a next-generation platform for cost-effective 3HP production and paves the way toward industrial commercialization.

Biotechnology↗
DOE OSTI2013

Sr- and Mn-doped LaAlO 3-δ for solar thermochemical H 2 and CO production

The increasing global appetite for energy within the transportation sector will inevitably result in the combustion of more fossil fuel. A renewable-derived approach to carbon-neutral synthetic fuels is therefore needed to offset the negative impacts of this trend, which include climate change. In this communication we report the use of nonstoichiometric perovskite oxides in two-step, solar-thermochemical water or carbon dioxide splitting cycles. We find that LaAlO 3 doped with Mn and Sr will efficiently split both gases. Moreover the H 2 yields are 9× greater, and the CO yields 6× greater, than those produced by the current state-of-the-art material, ceria, when reduced at 1350 °C and re-oxidized at 1000 °C. The temperature at which O 2 begins to evolve from the perovskite is fully 300 °C below that of ceria. The materials are also very robust, maintaining their redox activity over at least 80 CO 2 splitting cycles. This discovery has profound implications for the development of concentrated solar fuel technologies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

Studies on the new fuels with Santilli magnecular structure and their industrial applications

Professor R. M. Santilli, the Italian-American physicist, for the first time in the history of Science, presented the theoretical and experimental evidence on the existence of the new chemical species of “magnecules” [1]. This new species mainly consist of individual atoms, radicals and conventional molecules bonded together with stable clusters under the new attractive force primarily originating from torroidal polarization of orbitals of atomic electrons under strong magnetic field. The main contribution in this area was the production of Magnegas{sup TM}, new clean fuels developed by Prof. Santilli, which are produced as byproducts of recycling nonradioactive liquid feedstock such as antifreeze waste, engine oil waste, town sewage, crude oil, etc., and generally vary with the liquid used for their production. A new technology, called Plasma Arc FlowTM, flows the waste through a submerged electric arc between conventional electrodes. The arc decomposes the liquid molecules into their atomic constituents, and forms a plasma in the immediate vicinity of the electrodes at about 10,000{sup 0} F. The technology then moves the plasma away from the electrodes, and controls its recombination into environmentally acceptable fuels. In fact, the exhaust of magnegases shows: absence of carcinogenic or other toxic substances; breathable oxygen up 14 percent; and carbon dioxide down to 0.01 percent. Since, in addition, the new fuels can be produced everywhere, and have environmentally acceptable exhausts, Magnegases offer promising possibilities to satisfy our ever increasing energy needs, as well as to contain the alarming environmental problems caused by fossil fuels. Thus, it was thought worthwhile to present some of the industrial applications of environmentally benign fuel consisting magnecular bonds [2, 3, 4, 5]. Also in the present communications, some of the experimental evidences of Santilli’s new chemical species i. e. Magnecules which had been published recently have been summarized [6, 7, 8].

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Numerical Model of Thermoelectric Topping Cycle of Coal-Fired Power Plant

Traditional fossil fuel power generation process typically has low efficiency. Large amount of the energy loss in Rankine cycle steam turbines (ST) is due to the temperature difference between the combustion flame temperature ~2250 K (adiabatic) and the high pressure steam temperature up to 900 K. However, some of this energy can be harvested using solid-state thermoelectric (TE) power generators which are placed into the gap between the flame temperature and the steam temperature that produce additional electrical power. This study investigates the potential placement of TE on water tube wall inside a boiler at a coal-fired power plant. Three-dimensional (3D) numerical model of a simplified TE module is developed, and hot gas temperature and steam temperature from the boiler are used as boundary conditions at the hot side and cold side of the TE. The numerical results are compared with analytical calculations. The 3D effects of the thermal spreading in the TE module are investigated. Parameters such as TE leg cross section area and TE fill factor are examined in order to maximize the electrical power production of the TE without sacrificing the boiler efficiency (i.e., reducing the steam temperature). The study also looks into the various locations inside the boiler that have good potential for TE installation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2012

CO 2 -based mixtures as working fluids for geothermal turbines

Sandia National Laboratories (Sandia) is investigating advanced Brayton cycles using supercritical working fluids for application to a variety of heat sources, including geothermal, solar, fossil, and nuclear power. This work, under the Sandia and U.S. Department of Energy (DOE) Office of Advanced Reactor Concepts, is centered on the supercritical CO 2 (S-CO 2 ) power conversion cycle, which has the potential for high efficiency in the temperature range of interest for these heat sources and is very compact—a feature likely to reduce capital costs. As the S-CO 2 program progresses to a full Brayton power-generating cycle, new strategies are being pursued with a focus towards further pushing cycle efficiency.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2012

Modeling thermal abuse in transportation batteries

Transition from fossil-fueled to electrified vehicles depends on developing economical, reliable batteries with high energy densities and long life. Safety, preventing premature or catastrophic failure, is of paramount importance in battery design. The largest gaps in our technical understanding of the safe operation of electrical energy storage devices involve the fundamental mechanisms, energetics, and inefficiencies of complex processes that occur during battery operation that can lead to thermal runaway: charge transfer, charge carrier and ion transport, both in the bulk and at various interfaces, and morphological and phase transitions associated with Li ion transport between cathode and anode. We have developed a suite of modeling tools to consider phenomena related to battery safety, thermal management, and the onset of thermal runaway in transportation-based secondary Li-ion batteries, rooted in a first-principles description of the governing atomistic processes at the electrode-electrolyte interface, propagating chemical information through multiple scales to a continuum-scale description of thermal transport and failure capable of addressing a variety of operational and thermal excursion conditions. These tools enable the identification of potential safety and stability issues of new battery designs prior to experimental realization.

Muller, Richard Partain↗
DOE OSTI2016

High Pressure Biomass Gasification

According to the Billion Ton Report, the U.S. has a large supply of biomass available that can supplement fossil fuels for producing chemicals and transportation fuels. Agricultural waste, forest residue, and energy crops offer potential benefits: renewable feedstock, zero to low CO 2 emissions depending on the specific source, and domestic supply availability. Biomass can be converted into chemicals and fuels using one of several approaches: (i) biological platform converts corn into ethanol by using depolymerization of cellulose to form sugars followed by fermentation, (ii) low-temperature pyrolysis to obtain bio-oils which must be treated to reduce oxygen content via HDO hydrodeoxygenation), and (iii) high temperature pyrolysis to produce syngas (CO + H 2 ). This last approach consists of producing syngas using the thermal platform which can be used to produce a variety of chemicals and fuels. The goal of this project was to develop an improved understanding of the gasification of biomass at high pressure conditions and how various gasification parameters might affect the gasification behavior. Since most downstream applications of synags conversion (e.g., alcohol synthesis, Fischer-Tropsch synthesis etc) involve utilizing high pressure catalytic processes, there is an interest in carrying out the biomass gasification at high pressure which can potentially reduce the gasifier size and subsequent downstream cleaning processes. It is traditionally accepted that high pressure should increase the gasification rates (kinetic effect). There is also precedence from coal gasification literature from the 1970s that high pressure gasification would be a beneficial route to consider. Traditional approach of using thermogravimetric analyzer (TGA) or high-pressure themogravimetric analyzer (PTGA) worked well in understanding the gasification kinetics of coal gasification which was useful in designing high pressure coal gasification processes. However, similar approach for biomass gasification was not very useful and was the impetus for this study. Specifically, we aimed this study at three broad objectives: (i) defining operating conditions at which C 2 -C 4 hydrocarbons are formed since these represent loss of carbon efficiency, (ii) understanding the formation of tar species which create downstream processing difficulties in addition of carbon efficiency loss, and (iii) kinetics of biomass gasification where it would be possible to understand the effect of operating conditions and gas phase composition.

09 BIOMASS FUELS↗
DOE OSTI2019

Diagnostic Tool for Measuring Early Chemical Signatures of Pond Crash

The DOE is devoted to improving national energy security and reducing carbon emissions through the development of renewable alternatives to fossil fuel usage. This work demonstrates a pathway to improve the feasibility of large-scale biofuel production by reducing the occurrences of pond failures and their associated economic burdens. We have done this by identifying unique volatile chemical signals that indicate predator attack on an algal biofuel pond. These volatiles are easy to collect in the field and could be rapidly analyzed for state-of- health monitoring. This will allow producers to intervene early during predator attack on a pond and minimize crop loss.

09 BIOMASS FUELS↗