Search NASA⌕ Search

SEARCH · Search NASA

Results for “Flybys”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Three year orbital trim maneuver performance of the Cassini spacecraft attitude control subsystem.

Cassini is a sophisticated interplanetary spacecraft providing scientific findings that continue to offer insight into our solar system. After arriving at Saturn on June 30, 2004 it has completed three years of a four year prime mission. To date, Cassini has completed 49 orbits about Saturn and over 40 targeted flybys of Saturn’s moons. This has been achieved with a nominal design using three delta-V maneuvers per targeted encounter.

Smith, Brett A.↗

Analysis of architectures for the scientific exploration of Enceladus

In 2007, a JPL Rapid Mission Architecture (RMA) analysis team identified and evaluated a broad set of mission architecture options for a suite of scientific exploration objectives targeting the Saturnian moon Enceladus. Primary science objectives were largely focused on examination of the driving mechanisms and extent of interactions by the plumes of Enceladus recently discovered by Cassini. Investigation of the architectural trade space spanned a wide range of options, from high-energy flybys of Enceladus as a re-instrumented expansion on the Cassini mission, to more complex, multi-element combinations of Enceladus orbiters carrying multiple variants of in-situ deployable systems. Trajectory design emerged as a critical element of the mission concepts, enabling challenging missions on Atlas V and Delta IV-Heavy class launch vehicles. Various Enceladus Flagship-class mission concepts identified were analyzed and compared against several first-order figures of merit, including mass, cost, risk, mission timeline, and associated science value with respect to accomplishment of the full set of science objectives. Results are presented for these comparative analyses and the characterization of the explored trade space.

Strange, N.↗

Semi-analytic preliminary design of low-thrust missions

Using generalized logarithmic spirals to approximate low-thrust trajectories, a new strategy for the design of low-thrust gravity-assist transfers has been developed. Each transfer leg is defined by a semi-analytic model, and its solution is equivalent to a hybrid Lambert’s problem. The method is suitable for approximating both flyby and rendezvous transfer legs. A branch and prune algorithm is used to generate a collection of initial guesses for further optimization. The analytic nature of the low-thrust model simplifies the pruning step, since dynamical and operational constraints (like maximum thrust or total v) can be imposed easily. The solutions obtained with the global search algorithm can be post-processed, filtered, and ranked according to various criteria. This is where the versatility of the method resides, because changing the selection criteria does not require a new search. Selected candidates are then optimized further, in order to generate actual low-thrust orbits. Two mission design examples are presented: an asteroid deflection mission using a kinetic impactor, and a rendezvous mission to Jupiter. These examples are used to analyze the convergence of the optimization stage, in particular how far from the optimal solution the initial guesses are.

Park, Ryan S.↗

Overview of SPRITE: Saturn Probe Interior and aTmosphere Explorer Concept

The Saturn PRobe Interior and aTmosphere Explorer (SPRITE) mission concept targets high-priority Planetary Science Decadal Survey science objectives. This mission concept would deliver the SPRITE entry probe into the Saturn atmosphere to obtain in situ measurements of elemental abundances and isotopic ratios, which would help distinguish the role Saturn played in the solar system formation and co-evolution of other planets. An Atmospheric Structure Investigation sensor package on the entry probe would provide in situ measurements of the pressure/temperature and wind structure below the cloud-tops, and a Quadrupole Mass Spectrometer and Tunable Laser Spectrometer suite would determine the composition of Saturn’s atmosphere. The SPRITE mission concept described in this paper uses a solar-powered carrier-relay spacecraft to deliver the battery-powered entry probe to Saturn after a 10-year Venus-Earth-Earth gravity-assist trajectory, and then relays the probe data back to Earth during the carrier-relay spacecraft Saturn flyby. A high-heritage design approach is implemented for the flight elements to minimize technical risk and enable successful return of this high-value science data.

Cuddy, Cavan↗

Mission Concept for a Europa Lander

A NASA HQ-directed study team led by the Jet Propulsion Laboratory (JPL) with partners including Applied Physics Lab, Marshall Space Flight Center, Goddard Space Flight Center, Langley Research Center and Sandia National Laboratory has recently presented a mission concept for a Europa Lander that would search for bio-signatures and signs of life in the near-subsurface of the Jovian moon. The mission would follow the Europa Clipper multiple-flyby mission, planned for launch in June of 2022, which would provide reconnaissance imagery and other data to the Lander for use in selecting a scientifically compelling site and certifying it for engineering safety. The Europa Lander concept accommodates the Model Payload identified by the Europa Lander Science Definition Team (SDT) and documented in the Europa Lander Study 2016 Report released in February of 2017. The currently envisioned Europa Lander would launch on an SLS Block 1B as early as October of 2025 into a VEGA trajectory, arriving in the Jovian system as early as July of 2030. The baseline design of the integrated flight system includes a dedicated Carrier and Relay Stage, a Deorbit Vehicle composed of a Deorbit Stage consisting of a solid rocket motor (SRM), an MSL-like sky-crane Descent Stage, and a Lander which accommodates the instrument suite. The Lander would be powered by primary batteries over a 20-day surface mission. The science goals envisioned by the SDT require five samples taken from a depth of 10cm, a depth chosen to ensure minimal radiation processing of the potential biomarkers. Mission challenges include the large launch mass, unknown terrain topography, surface composition and materials properties, the high radiation environment, and complying with stringent planetary protection requirements. The mission concept uses a strategy of early risk reduction and overlapping requirements to provide robustness to harsh and uncertain environments. Early risk reduction efforts are aimed at maturing technologies associated with the sampling system, the intelligent landing system, high specific energy batteries, low mass and power motor controllers, and a thermal sterilization system.

Dooley, Jennifer↗

Flight Dynamics of Mars Helicopter

Starting with the first attempted flybys of Mars in the 1960s, human exploration of the Red Planet has evolved through ever-more sophisticated means, with the use of orbiters, stationary landers, and more recently rovers that have traveled over distances of tens of kilometers in search of new knowledge. Yet, despite discussion since the early days of space exploration, no mission has so far attempted to unlock the aerial dimension of Mars exploration through the use of atmospheric flyers. This could be about to change, as NASA is currently considering sending a small helicopter to the Martian surface as part of a future mission, as a technology demonstration to verify the feasibility and utility of using helicopters for future Mars exploration. The use of helicopters promises to bridge a resolution gap in current Mars exploration capabilities—betweeen orbiters providing large-area imagery at low resolution, and rovers that provide detailed imagery limited by line-of-sight from the current rover location. Paired with a rover, a helicopter can act as a forward reconnaisance platform, helping to identify promising science targets or mapping the terrain ahead of the rover. Looking further ahead, helicopters may one day carry their own science payloads to areas that are inaccessible to rovers.

San Martin, Miguel↗

Parker Solar Probe Navigation: one year from launch

Parker Solar Probe (PSP) will be the first spacecraft designed to fly deep within the Sun’s lower corona and also becoming the fastest spacecraft flown. Launch is scheduled for next year, with a 20-day launch period beginning on 31 July 2018. PSP will be on a ballistic trajectory, requiring seven Venus flybys to progressively lower the perihelion over the seven-year mission. This near-solar environment can be particularly challenging from a spacecraft design as well as a navigation perspective. We discuss an overview of the mission along with some of the particular challenges in navigating PSP.

Valerino, Powtawche↗

The Cassini Grand Finale Mission: Planning for a New Mission Environment

The Cassini F-Ring & Proximal Orbits (FRPO) is a new and unique mission; to ensure the highest priority science gets implemented, the POST (Proximal Orbit Science Team) was created to pre-allocate the time around periapse for all 22 proximal orbits. The F-ring orbits, and proximal time outside of POST, were handled similar to Cassini’s Solstice Mission using the Pre-Integrated Event (PIE) process. The new and unique properties of the spacecraft’s trajectory required much forethought to be flown safely while still planning for the most and best science return possible. Some ring-plane crossings (RPX) will be protected against dust impacts by turning the high gain antenna (HGA) to the dust RAM direction (HGA2RAM). If on the first proximal RPX higher than expected dust readings are seen then the Project Office may choose to require more (all) subsequent RPX to be HGA2RAM, implemented via a real-time command overlay for uplinked sequences. The pointing uncertainties will be larger than usual after the final targeted flyby; some of the process changes to address this include adding extra orbit trim maneuvers (OTMs) (fuel permitting) to resync to the reference trajectory and reduce pointing uncertainties; and movable blocks of commands to be used for some periapses where atmospheric drag may cause large timing shifts Changes made for FRPO to address perceptions that these sequences will be hard to implement include requiring early pointing designs (during integration) for certain types of observations, requiring teams to check early on that they can turn to and from their observation attitude, and that their attitude is safe, and adjusting the Implementation process to give more time for science observation designers. This paper will discuss these process changes and lessons learned so far.

Ray, Trina↗

Internal Electrostatic Discharge Tests of Micro-D Connectors for Planned Europa Mission

NASA has planned a mission to study Jupiter’s moon, Europa. The mission would place a spacecraft into orbit around Jupiter, performing nominally 45 flybys of the moon. The suite of instruments onboard the spacecraft would investigate Europa’s potential to sustain life, studying the moon’s atmosphere, water-ice crust, suspected subsurface ocean, and rocky interior. The radiation environment at Europa’s orbit is severe and presents a significant threat to the spacecraft. There are several radiation effects that could be problematic, one of which is internal charging. Problems due to internal charging arise when high energy electrons penetrate the spacecraft and deposit within onboard dielectrics or floating metals. These charges can build up over time, generating electric fields that exceed the breakdown strength of materials in the region. A rapid discharge of the stored charges may occur, sending current pulses into electronics and potentially damaging them. An Internal Electrostatic Discharge (IESD) design environment was created for the planned Europa mission [Kim et al, in press]. The IESD design environment is meant to characterize the part of the radiation environment that poses the largest threat to the spacecraft with respect to internal charging. The environment was based off of electron data gathered by the Galileo spacecraft. Over the past year, the internal charging threat to several hardware components of the planned Europa Clipper spacecraft have been characterized using simulations and/or tests. The subject report documents one such test on Micro-D connectors.

Smithfield, Marianne↗

Design and Development of the Heat Redistribution System for the Mission to Europa Spacecraft:

This paper details the conceptual design of the Heat Redistribution System (HRS) used for thermal control of the Europa Clipper spacecraft. The solar powered spacecraft will launch in the early 2020s and will study Jupiter’s Icy moon, Europa, where previous investigations have indicated the possibility of a liquid water ocean underneath its ice-encrusted surface. The spacecraft will execute multiple flybys of Europa while relying on the HRS for thermal control of the spacecraft bus. The HRS utilizes a Mechanically Pumped Fluid Loop (MPFL) to reclaim waste heat from an avionics and payload electronics compartment and redistribute it to other parts of the spacecraft, such as the propulsion module structure and the louver-radiator assembly. A “replacement heater block” provides supplemental heat when needed to maintain the spacecraft hardware above its allowable flight temperatures. Additionally, a set of thermal control valves autonomously actuate to reduce the fluid flow through the radiator during cold environment cases. The HRS was used in previous flight projects at JPL such as Mars Science Laboratory, but the uniqueness of the Europa Clipper mission has mandated changes to previous HRS designs; the most significant design drivers and design changes for this iteration of the HRS are discussed.

Bertagne, Christopher↗

Cassini’s Grand Finale – Attitude Control Subsystem Performance During Proximal Ring Plane Crossings

On April 22nd, 2017, the Cassini spacecraft made its final close targeted flyby of Titan, placing Cassini in the gap between Saturn and its innermost D-ring for the first time ever of its mission at Saturn. Cassini proceeded to fly through this region 22 times, and on September 15th, 2017, Cassini plunged into Saturn’s atmosphere, concluding a remarkable, nearly 20-year mission. The attitude control subsystem performance during these 22 “proximal” orbits exceeded expectations. Prior to the proximal orbits mission, the effects of dust hazards, Saturn atmospheric drag torque on Cassini’s control authority, radiation on the sensitive instruments, bright body interferences to the star tracker, pointing discrepancies caused by trajectory deviations, and possible fault protection scenarios were assessed. This paper discusses the results of these risks experienced by the attitude control subsystem over the proximal orbits mission, any interesting telemetry observed, as well as any last minute procedural changes implemented along the way.

Sung, Tina S.↗

A Science-Driven Mission Concept to An Exoplanet

A concept for a science-driven robotic mission to an exoplanet was developed by a team of scientists and engineers from NASA and academia. The concept and scope were based on key mission and science requirements designed to address the question: “What makes a flight mission to an exoplanet compelling, in terms of science return, compared to what we will be able to learn in the next few decades with large near-Earth telescopes or other remote sensing techniques such as a telescope at the Solar Gravity Lens Focus?” By thinking systematically through mission and science goals and objectives, key requirements were developed that would drive technology developments in all necessary aspects, not just on propulsion. Unique science measurements would be performed en route to the exoplanet, including exploring the environment in the outer regions of our solar system, the Oort Cloud, the local interstellar medium, and the astrospheric environment around the host star. One of the key mission science objectives, and one that addresses why a mission to an exoplanet is compelling, was to confirm and characterize life. This objective is fundamental and drives the need for a precursor exoplanet characterization program to search for Earth-centric biosignatures and also drives key aspects of the mission concept. The team concluded that a direct confirmation of life would require in situ observations and measurements which cannot be performed on a fast (~10% of the speed of light) flyby; thus, the mission would require a method to slow down, orbit, or send a probe to the exoplanet’s surface. This capability drives a trade between interstellar travel velocity, trip duration, and propulsion architecture, as well as a high level of onboard autonomy, including adaptive science data collection, on-board data processing, and analysis. This paper describes our mission concept, the key requirements, and open trades.

Bennett, Gary↗

Europa Clipper Thermal Control Design

This paper details the design developments of the Europa Clipper spacecraft thermal control system and its primary element the Heat Redistribution System (HRS). The Europa Clipper spacecraft will launch in the early 2020s and will have multiple flybys of Jupiter’s icy moon, Europa. The HRS, which utilizes a Mechanically Pumped Fluid Loop (MPFL) to reclaim waste heat from an avionics vault module and redistribute it to the propulsion module and radiator, has become an integral part of the spacecraft architecture both in terms of mechanical configuration and spacecraft operations capability. A walkthrough on the planned implementation of the HRS on the primary spacecraft modules is provided along with a description on thermal control of spacecraft hardware not located on the HRS vault, where thermal isolation and tolerance to extreme thermal environment drives the hardware designs.

Bhandari, Pradeep↗

In-Flight Operation of the Dawn Ion Propulsion System Through Completion of the Final Orbit Around Dwarf Planet Ceres

The Dawn mission, part of NASA’s Discovery Program, has as its goal the scientific exploration of the two most massive main-belt objects, Vesta and Ceres. The Dawn spacecraft was launched from the Cape Canaveral Air Force Station on September 27, 2007 on a Delta-II 7925H- 9.5 (Delta-II Heavy) rocket that placed the 1218-kg spacecraft onto an Earth-escape trajectory. On-board the spacecraft is an ion propulsion system (IPS) developed at the Jet Propulsion Laboratory for the heliocentric transfer to Vesta, orbit capture at Vesta, transfer between Vesta science orbits, departure and escape from Vesta, heliocentric transfer to Ceres, orbit capture at Ceres, transfer between Ceres science orbits, and orbit maintenance maneuvers. Full-power thrusting from December 2007 through October 2008 was used to successfully target a Mars gravity assist flyby in February 2009 that provided an additional DV of 2.6 km/s. Deterministic thrusting for the heliocentric transfer to Vesta resumed in June 2009 and concluded with orbit capture at Vesta on July 16, 2011. From July 2011 through September 2012 the IPS was used to transfer to all the different science orbits at Vesta and to escape from Vesta orbit. Cruise for a rendezvous with Ceres began in August 2012 and completed in late December 2014. From December 2014 through June 2016 the IPS was used for transiting the spacecraft to all science orbits at Ceres including the final orbit for Dawn’s primary mission, called the low altitude mapping orbit (LAMO), a circular orbit at a mean altitude above Ceres of approximately 385 km. Dawn met or exceeded all pre-launch science requirements and Dawn's prime mission concluded on June 30, 2016. Dawn subsequently received NASA approval for two extended missions at Ceres, called XM1 and XM2. During XM1 IPS was used for orbit maintenance and to transit the spacecraft to several new, higher-altitude science orbits, ending in an elliptical orbit at a maximum altitude of approximately 38,000 km. In XM2, IPS operations included transiting the Dawn spacecraft to its final, highly elliptical orbit at Ceres ranging from 35 km perigee to 4,800 km apogee. Science data acquisition will continue in XM2 until the hydrazine is exhausted, which is expected to occur between August and October 2018. Dawn has successfully completed all science goals for both the primary and XM1 extended missions. To date the IPS has been operated for approximately 51,250 hours, consumed approximately 416 kg of xenon, and provided a delta-V of almost 11.5 km/s, a record for an on-board propulsion system. The IPS performance characteristics are close to the expected performance based on analysis and testing performed pre-launch. Dawn’s IPS continues to be fully operational as of June 2018. This paper provides an overview of Dawn’s mission objectives and the results of Dawn IPS mission operations for XM1, and XM2 through June 2018.

Rayman, Marc D.↗

Overview of Primitive Volatile Explorer (PrOVE) Cubesat or Smallsat Concept

Here we describe the Primitive Object Volatile Explorer (PrOVE), a smallsat mission concept to study the surface structure and volatile inventory of comets in their perihelion passage phase when volatile activity is near peak. CubeSat infrastructure imposes limits on propulsion systems, which are compounded by sensitivity to the spacecraft disposal state from the launch platform and potential launch delays. We propose circumventing launch platform complications by using waypoints in space to park a deep space SmallSat or CubeSat while awaiting the opportunity to enter a trajectory to flyby a suitable target. In our Planetary Science Deep Space SmallSat Studies (PSDS3) project, we investigated scientific goals, waypoint options, potential concept of operations (ConOps) for periodic and new comets, spacecraft bus infrastructure requirements, launch platforms, and mission operations and phases. Our payload would include two low-risk instruments: a visible image (VisCAM) for 5-10 m resolution surface maps; and a highly versatile multispectral Comet CAMera (ComCAM) will measure 1) H2O, CO2, CO, and organics non-thermal fluorescence signatures in the 2-5 µm MWIR, and 2) 7-10 and 8-14 µm thermal (LWIR) emission. This payload would return unique data not obtainable from ground-based telescopes and complement data from Earth-orbiting observatories. Thus, the PrOVE mission would (1) acquire visible surface maps, (2) investigate chemical heterogeneity of a comet nucleus by quantifying volatile species abundance and changes with solar insolation, (3) map the spatial distribution of volatiles and determine any variations, and (4) determine the frequency and distribution of outbursts.

Zucherman, Aaron↗

Radio science at Jupiter: past investigations, current results, and future prospects

The latest mission to Jupiter, Juno, includes the most advanced radio science instrumentation to date. With Juno’s unique polar orbit and dual frequency radio links, it is able to probe the planet’s deep interior structure and zonal wind profile with measurements of the gravitational field and probe the electron densities in the Io plasma torus, a doughnut-shaped ring around Jupiter charged with particles emitted by the volcanic activity on Io. Upcoming missions, such as the planned NASA’s Europa Clipper multiple flyby mission in 2022, potential follow-on Europa Lander, and the ESA’s Jupiter Icy Moons Explorer mission in 2022, may make further strides in the study of the planet and its moons utilizing radio science.

Oudrhiri, Kamal↗

Simulaneous optimization of spacecraft and trajectory design for interplanetary missions utilizing solar electric propulsion

A major challenge in formulating interplanetary mission concepts utilizing electric propulsion is the large number of trajectory variables that must be considered (thrust profile, flyby options, launch vehicle delivery), all of which are affected by spacecraft design variables (power, mass, thruster, payload, staging). This is significantly more complex than traditional ballistic/chemical mission design and early concepts are often suboptimal as a result, potentially missing valuable options. This paper presents a novel tool (MORT) for simultaneously optimizing the spacecraft design alongside the trajectory given mission constraints and objectives, including example results relevant to the exploration of Mars.

Lock, Rob↗