Search NASA⌕ Search

SEARCH · Search NASA

Results for “Gas atomization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Classification of proton configurations of gas hydrate frameworks

All molecular configurations differing in the position of hydrogen atoms (protons) in hydrogen bonds and satisfying periodic boundary conditions have been calculated for the unit cells of CS-I, HS-III, and TS-IV gas hydrate frameworks. The configurations obtained are ranged according to the number of stronger trans-configurations of hydrogen-bound molecular pairs and according to the type of spatial symmetry. The configuration symmetry was analyzed taking into account the additional antisymmetry operation, which is related to the change in the direction of all hydrogen bonds. The strong dependence of the framework properties on the specific position of protons in H bonds is established.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epi-cleaning of Ge/GeSn heterostructures

We demonstrate a very-low temperature cleaning technique based on atomic hydrogen irradiation for highly (1%) tensile strained Ge epilayers grown on metastable, partially strain relaxed GeSn buffer layers. Atomic hydrogen is obtained by catalytic cracking of hydrogen gas on a hot tungsten filament in an ultra-high vacuum chamber. X-ray photoemission spectroscopy, reflection high energy electron spectroscopy, atomic force microscopy, secondary ion mass spectroscopy, and micro-Raman showed that an O- and C-free Ge surface was achieved, while maintaining the same roughness and strain condition of the as-deposited sample and without any Sn segregation, at a process temperature in the 100–300 °C range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hot oxygen atoms in the upper atmosphere of Venus

Using data obtained by an ultraviolet spectrometer on the Pioneer-Venus Orbiter, energy and altitude distribution of nonthermal oxygen atoms in the Venus atmosphere for typical daytime and nighttime conditions are calculated using two different numerical methods. Agreement is found between results obtained by the two-stream transport method and the diffusion equation technique. Dissociative recombination of molecular oxygen ions and charge exchange of atomic oxygen ions with the neutral hydrogen and oxygen gas are the source terms, and calculations show that the dissociative recombination term is the dominant one. It is shown that measured hot atom concentrations exceed estimates of the thermal hydrogen atom concentrations derived from Brinton et al. (1980) over most of the daytime exosphere, and the calculated concentrations do so to an even greater extent. It is concluded that hot oxygen atoms are an important component of the dayside exosphere of Venus, their most important effect being the absorption of solar wind.

Nagy, A. F.↗

Ion Mobility Mass Spectrometry Direct Isotope Abundance Analysis

The nuclear forensics community is currently engaged in the analysis of illicit nuclear or radioactive material for the purposes of non-proliferations and attribution. One technique commonly employed for gathering nuclear forensics information is isotope analysis. At present, the state-of-the-art methodology for obtaining isotopic distributions is thermal ionization mass spectrometry (TIMS). Although TIMS is highly accurate at determining isotope distributions, the technique requires an elementally pure sample to perform the measurement. The required radiochemical separations give rise to sample preparation times that can be in excess of one to two weeks. Clearly, the nuclear forensics community is in need of instrumentation and methods that can expedite their decision making process in the event of a radiological release or nuclear detonation. Accordingly, we are developing instrumentation that couples a high resolution IM drift cell to the front end of a MS. The IM cell provides a means of separating ions based upon their collision cross-section and mass-to-charge ratio (m/z). Two analytes with the same m/z, but with different collision cross-sections (shapes) would exit the cell at different times, essentially enabling the cell to function in a similar manner to a gas chromatography (GC) column. Thus, molecular and atomic isobaric interferences can be effectively removed from the ion beam. The mobility selected chemical species could then be introduced to a MS for high-resolution mass analysis to generate isotopic distributions of the target analytes. The outcome would be an IM/MS system capable of accurately measuring isotopic distributions while concurrently eliminating isobaric interferences and laboratory radiochemical sample preparation. The overall objective of this project is developing instrumentation and methods to produce near real-time isotope distributions with a modular mass spectrometric system that performs the required gas-phase chemistry and separations. The system couples a high-resolution ion mobility (IM) drift cell to the front end of a mass spectrometer (MS) allowing for chemical separation prior to isotope distribution analyses. This will yield isotope ratio measurement capabilities with minimal sample preparation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Nonlinear dynamics of continuously measured Bose-Einstein condensates in one-dimensional harmonic traps

Continuous center-of-mass position measurements performed on an interacting harmonically trapped Bose-gas are considered. Using both a semianalytical mean-field approach and a completely quantum numerical technique based on the positive P representation, it is demonstrated that the atomic delocalization due to the measurement backaction is smaller for a strongly interacting gas. The numerically calculated second-order correlation functions demonstrate the appearance of atomic bunching as a result of the center-of-mass measurement. Although rather small, the bunching is also present for a strongly interacting gas, which is in contrast with the case of an unperturbed gas. The performed analysis allows us to speculate that, for relatively strong interactions, the size of the atomic cloud determined with a single snapshot measurement can become smaller than the ground-state cloud size.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Implications of SWAS Observations for Interstellar Chemistry and Star Formation

A long standing prediction of steady state gas-phase chemical theory is that H2O and O2 are important reservoirs of elemental oxygen and major coolants of the interstellar medium. Analysis of SWAS observations has set sensitive upper limits on the abundance Of O2 and has provided H2O abundances toward a variety of star forming regions. Based on these results, we show that gaseous H2O and O2 are not dominant carriers of elemental oxygen in molecular clouds. Instead the available oxygen is presumably frozen on dust grains in the form of molecular ices, with a significant portion potentially remaining in atomic form, along with CO, in the gas phase. H2O and O2 are also not significant coolants for quiescent molecular gas. In the case of H2O, a number of known chemical processes can locally elevate its abundance in regions with enhanced temperatures, such as warm regions surrounding young stars or in hot shocked gas. Thus, water can be a locally important coolant. The new information provided by SWAS, when combined with recent results from the Infrared Space Observatory, also provide several hard observational constraints for theoretical models of the chemistry in molecular clouds and we discuss various models that satisfy these conditions.

Bergin, Edwin A.↗

Informing air–carbon ablation modeling with theoretical calculations of atomic oxygen and nitrogen interacting with carbon surfaces

To understand the gas–surface chemistry above the thermal protection system of a hypersonic vehicle, it is necessary to map out the kinetics of key elementary reaction steps. In this work, extensive periodic density functional theory (DFT) calculations are performed to elucidate the interaction of atomic oxygen and nitrogen with both the basal plane and edge sites of highly oriented pyrolytic graphite (HOPG). Reaction energies and barriers are determined for adsorption, desorption, diffusion, recombination, and several reactions. These DFT results are compared with the most recent finite-rate model for air–carbon ablation. Our DFT results corroborated some of the parameters used in the model but suggest that further refinement may be necessary for others. The calculations reported here will help to establish a predictive kinetic model for the complex reaction network present under hypersonic flight conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rydberg-electron decoherence in experimentally obtained recurrence spectra

Using scaled-energy spectroscopy techniques (recurrence spectroscopy) we investigate the influence of collisionally induced decoherence on semiclassical orbits in the Stark-Rydberg system. This experimental investigation represents the first application of recurrence spectroscopy to an atomic system perturbed by collisions with external gas partners. We present high-resolution recurrence spectra of potassium, revealing core-scattered combination orbits, and with minor modifications to the data acquisition process, recurrence spectra were also obtained with the system perturbed by 10 torr of krypton gas. A simple decoherence model is applied to semiclassical theory to explain the loss of recurrence strength at high actions. In several cases we also observe the loss of coherent interference between orbits. The loss of coherent destructive interference causes an increase in the recurrence strength of several core-scattered combination orbits.

74 ATOMIC AND MOLECULAR PHYSICS↗

A source model for the L134N molecular cloud

The dark molecular cloud L134N is observed at millimeter wavelengths in the CS (J = 3-2), OCS (J = 7-6), and HDO (1 sub 11-1 sub 10) transitions. The CS (J = 3-2) transition was observed at four positions within the cloud, while the other two transitions were observed at one position each. Fractional abundances in the LTE approximation are calculated for each emission line detected. L134N appears to have a high-density core characterized by NH3, C3H2, and H(C-13)O(+) emission maps. A lower density envelope characterized by C(0-18), CS (J = 2-1), and SO emission surrounds the core. There appears to be a gas-phase oxygen abundance gradient in L134N with atomic oxygen depleted in the high-density core. Observed molecular distributions within L134N can be explained by a model in which chemical and physical processes in icy-dust-grain mantles influence the gas-phase molecular abundances.

Swade, Daryl A.↗

Probing the microscopic corrugation of liquid surfaces with gas-liquid collisions

We have measured the directions and velocities of Ne, Ar, and Xe atoms scattering from perfluorinated ether and hydrocarbon liquids to probe the relationship between the microscopic roughness of liquid surfaces and gas-liquid collision dynamics. Impulsive energy transfer is governed by the angle of deflection: head-on encounters deposit more energy than grazing collisions. Many atoms scatter in the forward direction, particularly at glancing incidence. These results imply that the incoming atoms recoil locally from protruding C-H and C-F groups in hard spherelike collisions.

King, Mackenzie E.↗

Characterization of simulated small-droplet fuel sprays

A two-fluid pneumatic atomizer operating at relatively high liquid and gas pressures produced water sprays that simulated small-droplet clouds of liquid fuel for use in studying vaporization and fuel-air mixing effects on combustor performance and emissions. To characterize the sprays, a scattered-light scanning instrument was developed and measurements of volume median or volume mean diameter, D sub V.5, were correlated with D sub O, W sub w, and W sub n, i.e., orifice diameter, water, and nitrogen gas flow rates, respectively, to give the general expression: D sub v.5 approx. (D sub o sup 0.2) (W sub w sup m) (W sub n sup n), which yields D sub v.5 = 45 (D sub o sup 0.2) (W sub w sup 0.2) (W sub w sup - 1.2). Values of D sub o, W sub w, and W sub n are in centimeters and grams/second, respectively. Farther downstream at an axial distance of 6.7 cm, exponent m increased from 0.2 to 0.4 and exponent n decreased from -1.2 to -1.0 and at a distance of 25 cm downstream of the atomizer, n decreased to -0.8. The increase in exponent m and decrease in exponent n was attributed to a loss of very small droplets from the spray due primarily to vaporization and diffusion effects on clouds of small droplets traveling a distance of 25 cm.

Ingebo, R. D.↗

Characterization of simulated small-droplet fuel sprays

A two-fluid pneumatic atomizer operating at relatively high liquid and gas pressures produced water sprays that simulated small-droplet clouds of liquid fuel for use in studying vaporization and fuel-air mixing effects on combustor performance and emissions. To characterize the sprays, a scattered-light scanning instrument was developed and measurements of volume median or volume mean diameter, D sub V.5, were correlated with D sub O, W sub w, and W sub n, i.e., orifice diameter, water, and nitrogen gas flow rates, respectively, to give the general expression: D sub v.5 approx. (D sub O sup 0.2) (W sub w sup m) (W sub n sup n), which yields D sub v.5 = 45 (D sub o sup 0.2) (W sub w sup 0.2) (W sub w sup -1.2). Values of D sub 0, W sub w, and W sub n are in centimeters and grams/second, respectively. Farther downstream at an axial distance of 6.7 cm, exponent m increased from 0.2 to 0.4 and exponent n decreased from -1.2 to -1.0 and at a distance of 25 cm downstream of the atomizer, n decreased to -0.8. The increase in exponent m and decrease in exponent n was attributed to a loss of very small droplets from the spray due primarily to vaporization and diffusion effects on clouds of small droplets traveling a distance of 25 cm.

Ingebo, R. D.↗

Realization of effective super Tonks-Girardeau gases via strongly attractive one-dimensional Fermi gases

A significant feature of the one-dimensional super Tonks-Girardeau gas is its metastable gas-like state with a stronger Fermi-like pressure than for free fermions which prevents a collapse of atoms. This naturally suggests a way to search for such strongly correlated behavior in systems of interacting fermions in one dimension. We thus show that the strongly attractive Fermi gas without polarization can be effectively described by a super Tonks-Girardeau gas composed of bosonic Fermi pairs with attractive pair-pair interaction. A natural description of such super Tonks-Girardeau gases is provided by Haldane generalized exclusion statistics. In particular, they are equivalent to ideal particles obeying more exclusive statistics than Fermi-Dirac statistics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

YbH + formation in an ytterbium ion trap

The trapped 171 Yb + ion is a promising candidate for portable atomic clock applications. However, with buffer-gas cooled ytterbium ions, the ions can be pumped into a low-lying 2 F 7 / 2 state or form YbH + molecules. These dark states reduce the fluorescence signal from the ions and can degrade the clock stability. In this work, we study the dynamics of the populations of the 2 F 7 / 2 state and YbH + molecules under different operating conditions of our 171 Yb + ion system. Our study indicates that 2 F 7 / 2 -state ions can form YbH + molecules through interactions with hydrogen gas. As observed previously, dissociation of YbH + is observed at wavelengths around 369 nm. We also demonstrate YbH+ dissociation using 405 nm light. Moreover, we show that the population in the dark states can be limited by using a single repump laser at 935 nm. Our study provides insights into the molecular formation in a trapped ion system.

74 ATOMIC AND MOLECULAR PHYSICS↗

First experimental determination of the ⁴⁰Ar(𝑛, 2𝑛)³⁹Ar reaction cross section and ³⁹Ar production in Earth’s atmosphere

The cosmogenic ³⁹Ar(t1∕2 = 268 years) isotope of argon is used for geophysical dating and tracing of underground and ocean water, as well as ice owing to its appropriate half-life and chemical inertness as a noble gas; ³⁹Ar serves also in nuclear weapon test monitoring. We measured for the first time the total cross section of the main ³⁹Ar cosmogenic production reaction in the atmosphere, namely ⁴⁰Ar(𝑛, 2𝑛)39 Ar, using 14.8 ± 0.3 MeV neutrons. The neutrons, produced by a deuterium-tritium generator, impinged on a stainless steel sphere filled with Ar gas highly enriched in the ⁴⁰Ar isotope and were monitored by a stack of fast-neutron activation foils. The reaction yield was measured by atom counting of long-lived ³⁹Ar with noble gas accelerator mass spectrometry and, independently, by decay counting relative to atmospheric argon (³⁹Ar/Ar= 8.12 × 10−16 ). A total ⁴⁰Ar(𝑛, 2𝑛)39 Ar cross section of 610 ± 100 mb was determined at 14.8 ± 0.3 MeV incident neutron energy. This result serves as a benchmark for recent theoretical calculations and evaluations, found to reproduce well the experimental total cross section. We use these energy-dependent theoretical cross sections together with experimental spectra of cosmogenic neutrons at different altitudes to calculate the global average rate of neutron-induced ³⁹Ar atmospheric production, resulting in 770 ± 240 39 Ar atoms/cm²/day. The secular equilibrium between the ³⁹Ar calculated production rate and radioactive decay rate leads to a partial isotopic abundance ³⁹Ar/Ar = (5.9 ± 1.8) × 10−16 , showing that ≈73% of atmospheric ³⁹Ar is produced by cosmogenic neutrons, the remaining part believed to be induced by muons and high-energy 𝛾 rays. The ⁴⁰Ar(𝑛, 2𝑛)³⁹Ar cross section at 14 MeV is also a key parameter for quantifying the anthropogenic contribution to atmospheric 39 Ar produced during the thermonuclear tests of the 1960s. We estimate that anthropogenic ³⁹Ar accounts for roughly 20% of the present atmospheric inventory.

39 Ar atmospheric production↗

Crystallizing Atomic Xenon in a Flexible MOF to Probe and Understand Its Temperature-Dependent Breathing Behavior and Unusual Gas Adsorption Phenomenon

Flexible metal–organic frameworks (MOFs) hold great promise as smart materials for specific applications such as gas separation. These materials undergo interesting structural changes in response to guest molecules, which is often associated with unique adsorption behavior not possible for rigid MOFs. Understanding the dynamic behavior of flexible MOFs is crucial yet challenging as it involves weak host–guest interactions and subtle structural transformation not only at the atomic/molecular level but also in a nonsteady state. Here we report an in-depth study on the adsorbate- and temperature-dependent adsorption in a flexible MOF by crystallizing atomic gases into its pores. Mn(ina)2 shows an interesting temperature-dependent response toward noble gases. Its nonmonotonic, temperature-dependent adsorption profile results in an uptake maximum at a temperature threshold, a phenomenon that is unusual. Full characterization of Xe-loaded MOF structures is performed by in situ single-crystal and synchrotron X-ray diffraction, IR spectroscopy, and molecular modeling. The X-ray diffraction analysis offers a detailed explanation into the dynamic structural transformation and provides a convincing rationalization of the unique adsorption behavior at the molecular scale. The guest and temperature dependence of the structural breathing gives rise to an intriguing reverse of Xe/Kr adsorption selectivity as a function of temperature. The presented work may provide further understanding of the adsorption behavior of noble gases in flexible MOF structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimized deposition and characterization of nanocrystalline magnesium indium oxide thin films for opto-electronic applications

Transparent conducting magnesium indium oxide films (MgIn{sub 2}O{sub 4}) were deposited on to quartz substrates without a buffer layer at an optimized deposition temperature of 450 deg. C to achieve high transmittance in the visible spectral range and electrical conductivity in the low temperature region. Magnesium ions are distributed over the tetrahedral and octahedral sites of the inverted spinel structure with preferential orientation along (3 1 1) Miller plane. The possible mechanism that promotes conductivity in this system is the charge transfer between the resident divalent (Mg{sup 2+}) and trivalent (In{sup 3+}) cations in addition to the available oxygen vacancies in the lattice. A room temperature electrical conductivity of 1.5 x 10{sup -5} S cm{sup -1} and an average transmittance >75% have been achieved. Hall measurements showed n-type conductivity with electron mobility value 0.95 x 10{sup -2} cm{sup 2} V{sup -1} s{sup -1} and carrier concentration 2.7 x 10{sup 19} cm{sup -3}. Smoothness of the film surface observed through atomic force microscope measurements favors this material for gas sensing and opto-electronic device development.

36 MATERIALS SCIENCE↗

Method and apparatus for desalinating water

This disclosure concerns a system and a method for removing dissolved solids from liquids. Specific implementations concern desalinating water. The system may comprise a blower, such as a thermal fan/compressor, configured to atomize a solid-bearing liquid to produce a hot, humid gas containing dissolved solids; a gas-solid separator configured to receive hot, humid gas containing entrained dissolved solids from the blower to separate the solids from the humid gas and to transmit the humid gas with solids removed through an exit port; a heater configured to heat the hot, humid gas received from the exit port of the gas-solid separator; and a condenser configured to receive heated humid gas from the heater and to condense solids-free liquid therefrom. The thermal fan/compressor may comprise a plurality of nozzles with outlets positioned adjacent atomization apertures across which a solid-bearing liquid flows and through which gas exiting the nozzles passes.

Abbasi, Bahman↗