Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hydrogen Development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Modeling of Some Physical Properties of Zirconium Alloys for Nuclear Applications in Support of UFD Campaign

Zirconium-based alloys Zircaloy-2 and Zircaloy-4 are widely used in the nuclear industry as cladding materials for light water reactor (LWR) fuels. These materials display a very good combination of properties such as low neutron absorption, creep behavior, stress-corrosion cracking resistance, reduced hydrogen uptake, corrosion and/or oxidation, especially in the case of Zircaloy-4. However, over the last couple of years, in the post-Fukushima Daiichi world, energetic efforts have been undertaken to improve fuel clad oxidation resistance during off-normal temperature excursions. Efforts have also been made to improve upon the already achieved levels of mechanical behavior and reduce hydrogen uptake. In order to facilitate the development of such novel materials, it is very important to achieve not only engineering control, but also a scientific understanding of the underlying material degradation mechanisms, both in working conditions and in storage of used nuclear fuel. This report strives to contribute to these efforts by constructing the thermodynamic models of both alloys; constructing of the respective phase diagrams, and oxidation mechanisms. A special emphasis was placed upon the role of zirconium suboxides in hydrogen uptake reduction and the atomic mechanisms of oxidation. To that end, computational thermodynamics calculations were conducted concurrently with first-principles atomistic modeling.

42 ENGINEERING↗

Triple redundant hydrogen sensor with in situ calibration

To meet sensing and calibration needs, an in situ calibration technique was developed. It is based on electrolytic generation of a hydrogen/air atmosphere within a hydrogen sensor. The hydrogen is generated from water vapor in the air, and being electrical in nature, the in situ calibration can be performed completely automatically in remote locations. Triply redundant sensor elements are integrated within a single, compact housing, and digital logic provides inter-sensor comparisons to warn of and identify malfunctioning sensor elements. An evaluation of this concept is presented.

Lantz, J. B.↗

Development of Room-Temperature Ferromagnetism in Nanocomposite CdO Codoped with Al and Gd: Treatment in Hydrogen Atmosphere

Cadmium oxide codoped with Al and Gd ion powders was synthesised by thermal codecomposition of a mixture of complexes of cadmium acetate dihydrate, gadolinium acetate hydrate, and aluminum nitrate nonahydrate. The mass ratio of Al/Cd was fixed while the mass ratio of Gd/Cd varied systematically. The purpose of the present study is to synthesise and study the transparent conducting oxide (TCO) CdO powder having room-temperature ferromagnetic (RT-FM) properties. To realize that purpose, the synthesised Al/Gd-codoped CdO powder was annealed under hydrogen gas with certain conditions. The X-ray diffraction (XRD) method confirmed the formation of a single nanocrystalline structure; thus, both Al/Gd ions were incorporated into CdO lattice forming solid solutions. Magnetic measurements revealed that some of the doped CdO powders gained paramagnetic (PM) properties where the susceptibility increases with increasing dopant Gd content; the measured effective magnetic moment of dopant Gd{sup 3+} was around 8 μ{sub B}. Furthermore, the magnetic energy of the created RT-FM of the codoped CdO samples by hydrogenation was found to be dependent on the Gd% doping level. For hydrogenated CdO powder doped with 3% Gd, the coercivity (H{sub c}) was 195.9 Oe, the remanence (M{sub r}) was 0.77 memu/g, the saturation magnetisation (M{sub s}) was 5.05 memu/g, and the energy product (U{sub m}) was 150.6 merg/g. Thus, the possibility of production of TCO CdO with RT-FM, where magnetic characteristics can be tailored by doping and post treatment under H{sub 2} gas, was proven. Thus, a new potential candidate to be used as a dilute magnetic semiconductor (DMS) was successfully synthesised.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Development of the front end test stand and vessel for extraction and source plasma analyses negative hydrogen ion sources at the Rutherford Appleton Laboratory

The ISIS pulsed spallation neutron and muon facility at the Rutherford Appleton Laboratory (RAL) in the UK uses a Penning surface plasma negative hydrogen ion source. Upgrade options for the ISIS accelerator system demand a higher current, lower emittance beam with longer pulse lengths from the injector. The Front End Test Stand is being constructed at RAL to meet the upgrade requirements using a modified ISIS ion source. A new 10% duty cycle 25 kV pulsed extraction power supply has been commissioned and the first meter of 3 MeV radio frequency quadrupole has been delivered. Simultaneously, a Vessel for Extraction and Source Plasma Analyses is under construction in a new laboratory at RAL. The detailed measurements of the plasma and extracted beam characteristics will allow a radical overhaul of the transport optics, potentially yielding a simpler source configuration with greater output and lifetime.

43 PARTICLE ACCELERATORS↗

Hydrogen Tank Project Q2 Report – FY 11

Quarterly report that represents PNNL's results of HDPE, LDPE, and industrial polymer materials testing. ASTM D638 type 3 samples were subjected to a high pressure hydrogen environment between 3000 and 4000 PSI. These samples were tested using an instron load frame and were analyzed using a proprietary set of excel macros to determine trends in data. The development of an in-situ high pressure hydrogen tensile testing apparatus is discussed as is the stress modeling of the carbon fiber tank exterior.

36 MATERIALS SCIENCE↗

Potential Application of Anaerobic Extremophiles for Hydrogen Production

During substrate fermentation many anaerobes produce the hydrogen as a waste product, which often regulates the growth of the cultures as an inhibitor. In nature the hydrogen is usually removed from the ecosystem due to its physical properties or by consumption of hydrogen by secondary anaerobes, which sometimes behave as competitors for electron donors as is seen in the classical example in anaerobic microbial communities via the interaction between methanogens and sulfate- or sulfur- reducers. It was demonstrated previously on mixed cultures of anaerobes at neutral pH that bacterial hydrogen production could provide an alternative energy source. But at neutral pH the original cultures can easily be contaminated by methanogens, a most unpleasant side effect of these conditions is the development of pathogenic bacteria. In both cases the rate of hydrogen production was dramatically decreased since some part of the hydrogen was transformed to methane, and the cultivation of human pathogens on a global scale is very dangerous. In our laboratory, experiments with obligately alkaliphilic bacteria that excrete hydrogen as the end metabolic product were performed at different temperature regimes. Mesophilic and moderately thermophilic bacterial cultures have been studied and compared for the most effective hydrogen production. For high-mineralized media with pH 9.5-10.0 not many methanogens are known to exist. Furthermore, the development of pathogenic contaminant microorganisms is virtually impossible: carbonate-saturated solutions are used as antiseptics in medicine. Therefore the cultivation of alkaliphilic hydrogen producing bacteria could be considered as most safe process for global Scale industry in future. Here we present experimental data on the rates of hydrogen productivity for mesophilic, alkaliphilic, obligately anaerobic bacterium Spirocheta americana ASpG1 and moderately thermophilic, alkaliphilic, facultative anaerobe Anoxybacillus pushchinoensis K1 and discuss the potential implications for alternative energy sources.

Pikuta, Elena V.↗

A Business Case Evaluation of Gas Switching Reforming (GSR) Technology: A Promising Technology for Natural Gas Reforming with Integrated CO2 Capture

Hydrogen is essential in the transition to sustainable energy, and developing low-carbon production methods is a key research focus. Traditional steam methane reforming (SMR) dominates the hydrogen industry but contributes substantially to CO2 emissions. In response, Gas Switching Reforming (GSR) has emerged as a novel process that integrates carbon capture and utilizes process heat more efficiently. Unlike other reforming methods, GSR consolidates oxidation and reduction reactions within a single reactor, which minimizes external energy inputs and simplifies scaling. Like conventional steam methane reforming (SMR), GSR can be integrated with water-gas shift and pressure swing adsorption units for pure hydrogen production. This work presents a comprehensive business case analysis of GSR technology based on experimental results in Technology Readiness Level 3, Life Cycle Assessment (LCA) and Techno-Economic (TEA) evaluation incorporating ASPEN Plus process modeling considering different configurations and energy scenarios. The TEA incorporates data from kinetic experiments from various catalysts to evaluate the GSR process under various conditions. The goal of this work is to evaluate GSR’s potential to serve as a low-carbon alternative to SMR, focusing on global warming potential and additional impact categories to evaluate a wide spectrum of environmental impacts. Comparative assessments were conducted with SMR, chemical loop reforming (CLR), and proton exchange membrane (PEM) electrolysis to explore trade-offs across environmental metrics. The environmental impact assessment of this work encompasses the entire hydrogen production lifecycle from raw material extraction to plant decommissioning, using a cradle-to-gate boundary. Preliminary findings highlight that GSR, when integrated with low-carbon energy sources, could significantly reduce environmental impacts, making it a promising candidate for low-carbon hydrogen infrastructure. The insights from this business case evaluation aim to guide industry in scale-up and commercialization of this promising clean energy technology.

03 NATURAL GAS↗

STATISTICAL EVALUATION OF PROCESSING DATA FROM THE RH RU HG MATRIX STUDY

An evaluation of the statistical significance of Rh, Ru, and Hg on DWPF Sludge Receipt and Adjustment Tank (SRAT) cycle catalytic hydrogen generation and process chemistry was conducted by the Savannah River National Laboratory (SRNL) using a full-factorial experimental design. This test design can identify significant interactions between these three species in addition to individual effects. Statistical modeling of data from the Rh-Ru-Hg matrix study has been completed. Preliminary data and conclusions were given in an earlier report. This final report concludes the work on the Rh-Ru-Hg matrix study. Modeling results are summarized below. Rhodium was found to: Promote increased total hydrogen mass; Promote an increase in the maximum hydrogen generation rate; Promote an increase in the hydrogen generation rate shortly after acid addition; Shorten the elapsed time between acid addition and the maximum hydrogen generation rate; Increase formate loss; Inhibit NO{sub 2} and total NO{sub x} off-gas species formation; and Reduce nitrite-to-nitrate conversion. Ruthenium was found to: Promote increased total hydrogen mass; Promote an increase in the maximum hydrogen generation rate; Promote an increase in the hydrogen generation rate in the second half of the SRAT cycle; Promote an increase in total CO{sub 2} generated; Increase formate loss; Promote NO{sub 2} and total NO{sub x} off-gas species formation; and Reduce nitrite-to-nitrate conversion. Mercury was found to: Inhibit total hydrogen mass produced; Promote an increase in total CO{sub 2} generated; Promote NO{sub 2} off-gas species formation; and Inhibit total NO{sub x} off-gas species formation. Results confirmed qualitative observations that Rh was activating before Ru for hydrogen generation. An interaction between Rh and Ru was present in the model for the total hydrogen generated during the SRAT, perhaps because the total combined contributions from two separate episodes of hydrogen generation. The first episode was dominated by Rh and the second by Ru. Consequently, the linear statistical model was asked to explain more than one phenomenon and included more terms. Mercury did not significantly impact hydrogen generated by either Rh or Ru in models in this study (all tests had Hg {ge} 0.5 wt% in total solids), whereas tests in Sludge Batches 3 and 4 (SB3 and SB4) with and without Hg showed a very significant negative impact from adding Hg. The conclusion is that once a small quantity of Hg is present, the primary inhibiting effect of Hg is in place, and hydrogen generation is relatively insensitive to further increases in total Hg. Any secondary Hg effects were difficult to quantify and model. Mercury was found to be statistically significant, however, as an inhibiting factor for hydrogen generation when modeling was based on the logarithm of the hydrogen generation rate. Only limited statistical evidence was found for non-linearity and quadratic dependence of other SRAT process measures, such as formate loss or total NO{sub x} generation, on the three matrix variables. The interaction term for Ru with Hg, however, appeared in models for total CO{sub 2}, total NO{sub 2}, and total moles of nitrogen-derived off-gas species. A single interaction between Ru and Hg during nitrite destruction could explain all three of these effects in the observed responses. Catalytic decomposition of nitrite ion by formic acid produces CO{sub 2} plus either NO or N{sub 2}O. The vast majority of the NO produced is converted to NO{sub 2}, and NO{sub 2} is the major fraction of the total moles of nitrogen in the off-gas species. Future experimental work related to catalytic hydrogen generation control is expected with regard to minimizing formic acid use through alternative reductants as well as in pursuing mesoporous media for sequestering the catalytically active noble metals to inhibit catalytic hydrogen generation. Two alternative stoichiometric acid equations are also under development. A summary document is in draft form that provides an overview of progress made in understanding catalytic hydrogen generation as well as the progress made in resolving open issues from the one external and two internal reviews of the catalytic hydrogen generation program.

08 HYDROGEN↗

The ground state properties of spin-aligned atomic hydrogen, deuterium, and tritium

The internal energy, pressure, and compressibility of ground-state, spin-aligned atomic hydrogen, deuterium, and tritium are calculated assuming that all pair interactions occur via the atomic triplet (spin-aligned) potential. The conditions required to obtain atomic hydrogen and its isotopes in bulk are discussed; such a development would be of value in propulsion systems because of the light mass and energetic recombination of atomic hydrogen. Results show that atomic triplet hydrogen and deuterium remain gaseous at 0 K, and that tritium forms a liquid with a binding energy of approximately -0.75 K per atom at a molar volume of 130 cu cm per mole. The pair distribution function for these systems is calculated, and the predicted superfluid behavior of atomic triplet hydrogen and tritium is briefly discussed.

Etters, R. D.↗

Simple Electrolyzer Model Development for High-Temperature Electrolysis System Analysis Using Solid Oxide Electrolysis Cell

An electrolyzer model for the analysis of a hydrogen-production system using a solid oxide electrolysis cell (SOEC) has been developed, and the effects for principal parameters have been estimated by sensitivity studies based on the developed model. The main parameters considered are current density, area specific resistance, temperature, pressure, and molar fraction and flow rates in the inlet and outlet. Finally, a simple model for a high-temperature hydrogen-production system using the solid oxide electrolysis cell integrated with very high temperature reactors is estimated.

99 GENERAL AND MISCELLANEOUS↗

High Capacity Battery Cell Flight Qualified

The High Capacity Battery Cell project is an effort equally funded by the NASA Lewis Research Center and Hughes Space and Communications Company (a unit of Hughes Aircraft Company) to develop and flight qualify a higher capacity nickel hydrogen battery for continuing use on commercial spacecraft. The larger diameter, individual pressure vessel cell will provide approximately twice the power, while occupying the same volume, as the current state-of-the-art nickel hydrogen cell. These cells are also anticipated to reduce battery cost by 20 percent. The battery is currently booked for use on 26 spacecraft, with the first flight scheduled in 1997. A strong requirement for batteries with higher power levels (6 to 12 kW), long life, and reduced cost was identified in studies of the needs of commercial communications spacecraft. With the design developed in this effort, the higher power level was accommodated without having to modify the rest of the existing spacecraft bus. This design scaled-up the existing state-of-the-art nickel hydrogen battery cell from a 3.5-in., 50-Ahr cell to a 5.5-in., 350-Ahr cell. An improvement in cycle life was also achieved by the use of the 26-percent KOH electrolyte design developed by NASA Lewis. The cell design was completed, and flight batteries were built and flight qualified by Hughes Space and Communications Company with input from NASA Lewis. Two batteries were shipped in September 1996 to undergo life cycle testing under the purview of NASA Lewis.

McKissock, Barbara I.↗

Development of the multigroup cross section library for the CASL neutronics simulator MPACT: Method and procedure

The MPACT neutronics module of the Consortium for Advanced Simulation of Light Water Reactors (CASL) core simulator is a 3D whole core transport code being developed for the CASL toolset known as the Virtual Environment for Reactor Analysis (VERA). Key characteristics of the MPACT code include a subgroup method for resonance self-shielding and a whole-core transport solver with a 2D/1D synthesis method. The AMPX and SCALE code packages have been significantly improved to include intermediate resonance parameters, as well as new modules to enhance the accuracy of resonance data and scattering matrices for the Bondarenko approach and transport cross sections of hydrogen. In addition, CASL XSTools have been developed to generate the MPACT multigroup cross section library. A simple super-homogenization method for 238U has been developed to resolve reaction rate discrepancy issues caused by angle-dependent total cross sections, poor scattering matrices, and a poor resonance interference model at coarse group structure. Here, due to the limitation of computing capacity that can occur even in high performance computing, a new 51-group structure has been developed for efficient simulation that is applicable for both pressurized water reactor (PWR) and boiling water reactor (BWR) simulations. A new ENDF/B-VII.1 MPACT 51-group library has been developed using the AMPX/SCALE and XSTools code packages, and it has been verified and validated by performing various benchmark calculations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Metals production

Existing procedures for design of electrochemical plants can be used for design of lunar processes taking into consideration the differences in environmental conditions. These differences include: 1/6 Earth gravity, high vacuum, solar electrical and heat source, space radiation heat sink, long days and nights, and different availability and economics of materials, energy, and labor. Techniques have already been developed for operation of relatively small scale hydrogen-oxygen fuel cell systems used in the U.S. lunar landing program. Design and operation of lunar aqueous electrolytic process plants appears to be within the state-of-the-art. Finding or developing compatible materials for construction and designing of fused-magma metal winning cells will present a real engineering challenge.

Beck, Theodore S.↗

Hyperthermal Environments Simulator for Nuclear Rocket Engine Development

An arc-heater driven hyperthermal convective environments simulator was recently developed and commissioned for long duration hot hydrogen exposure of nuclear thermal rocket materials. This newly established non-nuclear testing capability uses a high-power, multi-gas, wall-stabilized constricted arc-heater to produce hightemperature pressurized hydrogen flows representative of nuclear reactor core environments, excepting radiation effects, and is intended to serve as a low-cost facility for supporting non-nuclear developmental testing of hightemperature fissile fuels and structural materials. The resulting reactor environments simulator represents a valuable addition to the available inventory of non-nuclear test facilities and is uniquely capable of investigating and characterizing candidate fuel/structural materials, improving associated processing/fabrication techniques, and simulating reactor thermal hydraulics. This paper summarizes facility design and engineering development efforts and reports baseline operational characteristics as determined from a series of performance mapping and long duration capability demonstration tests. Potential follow-on developmental strategies are also suggested in view of the technical and policy challenges ahead. Keywords: Nuclear Rocket Engine, Reactor Environments, Non-Nuclear Testing, Fissile Fuel Development.

Litchford, Ron J.↗

Metal Hydride Compression

Conventional hydrogen compressors often contribute over half of the cost of hydrogen stations, have poor reliability, and have insufficient flow rates for a mature FCEV market. Fatigue associated with their moving parts including cracking of diaphragms and failure of seal leads to failure in conventional compressors, which is exacerbated by the repeated starts and stops expected at fueling stations. Furthermore, the conventional lubrication of these compressors with oil is generally unacceptable at fueling stations due to potential fuel contamination. Metal hydride (MH) technology offers a very good alternative to both conventional (mechanical) and newly developed (electrochemical, ionic liquid pistons) methods of hydrogen compression. Advantages of MH compression include simplicity in design and operation, absence of moving parts, compactness, safety and reliability, and the possibility to utilize waste industrial heat to power the compressor. Beyond conventional H2 supplies of pipelines or tanker trucks, another attractive scenario is the on-site generating, pressuring and delivering pure H 2 at pressure (≥ 875 bar) for refueling vehicles at electrolysis, wind, or solar generating production facilities in distributed locations that are too remote or widely distributed for cost effective bulk transport. MH hydrogen compression utilizes a reversible heat-driven interaction of a hydride-forming metal alloy with hydrogen gas to form the MH phase and is a promising process for hydrogen energy applications [1,2]. To deliver hydrogen continuously, each stage of the compressor must consist of multiple MH beds with synchronized hydrogenation & dehydrogenation cycles. Multistage pressurization allows achievement of greater compression ratios using reduced temperature swings compared to single stage compressors. The objectives of this project are to investigate and demonstrate on a laboratory scale a two-stage MH hydrogen (H 2 ) gas compressor with a feed pressure of >50 bar and a delivery pressure ≥ 875 bar of high purity H 2 gas using the scheme shown in Figure 1. Progress to date includes the selection of two candidate metal hydrides for each compressor stage, supplier engagement and synthesis of small samples, and the beginning of in-depth characterization of their thermodynamics, kinetics, and hydrogen capacities for optimal performance with respect to energy requirements and efficiency. Additionally, bed design trade studies are underway and will be finalized in FY18. Subsequently, the prototype two-stage compressor will be fabricated, assembled and experimentally evaluated in FY19.

08 HYDROGEN↗

Metal Hydride Compression

Conventional hydrogen compressors often contribute over half of the cost of hydrogen stations, have poor reliability, and have insufficient flow rates for a mature fuel cell vehicle market. Fatigue associated with their moving parts including cracking of diaphragms and failure of seals leads to failure in conventional compressors, which is exacerbated by the repeated starts and stops expected at fueling stations. Furthermore, the conventional lubrication of these compressors with oil is generally unacceptable at fueling stations due to potential fuel contamination. MH technology offers a very good alternative to both conventional (mechanical) and newly developed (electrochemical, ionic liquid pistons) methods of hydrogen compression. Advantages of MH compression include simplicity in design and operation, absence of moving parts, compactness, safety and reliability, and the possibility to utilize waste industrial heat to power the compressor. Beyond conventional H 2 supply via pipelines or tanker trucks, another attractive scenario is the on-site generation and delivery of pure H 2 at pressure (> 875 bar) for refueling vehicles at electrolysis, wind, or solar H 2 production facilities in distributed locations that are too remote or widely distributed for cost effective bulk transport. MH hydrogen compression utilizes a reversible heat-driven interaction of a hydride-forming metal alloy with hydrogen gas to form the MH phase and is a promising process for hydrogen energy applications. To deliver hydrogen continuously, each stage of the compressor must consist of multiple MH beds with synchronized hydrogenation & dehydrogenation cycles. Multistage pressurization allows achievement of greater compression ratios using reduced temperature swings compared to single stage compressors. The objectives of this project are to investigate and demonstrate on a laboratory scale a twostage MH hydrogen gas compressor with a feed pressure of >100 bar and a delivery pressure > 875 bar of high purity H 2 gas using the scheme shown in Figure 1. Progress to date includes the selection of metal hydrides for each compressor stage based on experimental characterization of their thermodynamics, kinetics, and hydrogen capacities for optimal performance with respect to energy requirements and efficiency. Additionally, final bed designs have been completed based on trade studies and all components have been ordered. The prototype two-stage compressor will be fabricated, assembled, and experimentally evaluated in FY19.

08 HYDROGEN↗

General Motors: Final Report for Hydrogen Storage Engineering Center of Excellence

As part of the HSECoE team, the GM team built system models and detailed transport models for on-board hydrogen storage systems using metal hydrides and adsorbent materials. Detailed transport models have been developed for both the metal hydride and adsorbent systems with a focus on optimization of heat exchanger designs with the objective of minimizing the heat exchanger mass. We also performed work in collaboration with our partners on storage media structuring and enhancement studies for the metal hydride and adsorbent materials. Since the hydrogen storage materials are generally characterized by low density and low thermal conductivity, we conducted experiments to form pellets and add thermal conductivity enhancers to the storage material, and to improve cycling stability and durability of the metal hydride and adsorbent materials. Refueling of a MOF-5 pellet with cryogenic hydrogen was studied by developing a detailed two-dimensional axisymmetric COMSOL® model of the process. The effects of pellet permeability, thermal conductivity, and thermal conductivity enhancers were investigated. Our key area of focus has been on designing and building a cryo-adsorption vessel for validation of cryo-adsorption models. The 3-L cryogenic tank was used to study the fast fill and discharge dynamics of a cryo-adsorbent storage system, both experimentally and numerically.

08 HYDROGEN↗