Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTERSTITIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Formation of magnetic discontinuities through superposition of force-free magnetic fields: Periodic boundaries

In ideal magnetohydrodynamics characterized by an infinite electrical conductivity, the magnetic flux across an arbitrary fluid surface is conserved in time. The magnetofluid then can be partitioned into contiguous subvolumes of fluid, each of which entraps its own subsystem of magnetic flux. During dynamical evolution of the magnetofluid, these subvolumes press into each other; and in the process, two such subvolumes may come into direct contact while ejecting a third interstitial subvolume. Depending on the orientations of magnetic fields of the two interacting subvolumes, the magnetic field at the common surface of interaction may become discontinuous and a current sheet is formed there. This process of current sheet formation and their subsequent decay is believed to be a plausible mechanism for coronal heating and may also be responsible for various eruptive phenomena at the solar corona. In this work, we explore this theoretical concept through numerical simulations of a viscous, incompressible magnetofluid characterized by infinite electrical conductivity. In particular, we show that if the initial magnetic field is prescribed by superposition of two linear force-free fields with different torsion coefficients, then formation of current sheets are numerically realizable in the neighborhood of magnetic nulls.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of microstructure and semiconductor to metallic conductivity transition in solid state sintered Li{sub 0.5}Mn{sub 0.5}Fe{sub 2}O{sub 4−δ} spinel ferrite

Li{sub 0.5}Mn{sub 0.5}Fe{sub 2}O{sub 4} ferrite has been prepared by solid state sintering route. XRD pattern showed single phased cubic spinel structure. The samples exhibited typical character of plastoferrite with ring shaped surface microstructure. New feature observed in the present ferrite is the frequency activated conductivity transition from semiconductor to metallic state above 800 K. The increase of conductivity with frequency in the semiconducting regime follows Jonscher power law, while decrease of conductivity in metallic regime obeys Drude equation. The conductivity in semiconductor regime has been understood by hopping mechanism of localized charge carriers among the cations in B sites of cubic spinel structure. At higher temperatures, overlapping of electronic orbitals from neighbouring ions and free particle like motion of lighter Li{sup +} ions among interstitial lattices contributed metallic conductivity. The samples provided evidence of localized nature of the charge carriers at lower temperatures and increasing delocalized character with the increase of measurement temperature. From application point of view, such ferrites behave as semiconductor at low temperature and allow electromagnetic wave to pass through, but transform into a metallic reflector with negative dielectric constant at high temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mn concentration dependent structural and optical properties of a-plane Zn{sub 0.99-x}Mn{sub x}Na{sub 0.01}O

Non-polar a-plane (112{sup ¯}0) Zn{sub 0.99−x}Mn{sub x}Na{sub 0.01}O (x = 0, 0.02, 0.03, 0.04, and 0.05) thin films have been prepared on r-plane (112{sup ¯}0) sapphire substrates by pulsed laser deposition (PLD). The influences of Mn content on the structural and optical properties of the films have been studied. It is indicated that moderate Mn doping facilitates the non-polar growth of ZnO, and all the doped films are single phase with a hexagonal wurtzite structure. The transmittance spectra suggested that all films are transparent in the visible region exhibiting a transmittance above 80%. Mn{sup 2+} doped Zn{sub 0.99}Na{sub 0.01}O shows an initial decrease of optical band gap (OBG) for small concentration of Mn, followed by a monotonic increase. The anomalous decrease in OBG for low concentrations of Mn is attributed to the strong exchange interaction present between the sp electrons of the host matrix and d electrons of Mn. Emission studies were also performed showing suppressed blue-shifted ultraviolet band and dominant violet-blue bands, which might originate from the zinc vacancy (V{sub Zn}) and zinc interstitial (Zn{sub i}) defects. The intensity of defect-related emission peaks is Mn doping-level-dependent as well and the results coincide well with that from the structural analyses.

36 MATERIALS SCIENCE↗

Origins of low resistivity and Ge donor level in Ge ion-implanted ZnO bulk single crystals

The energy level of Ge in Ge-ion implanted ZnO single crystals is studied by Hall-effect and photoluminescence (PL) methods. The variations in resistivity from ∼10{sup 3} Ωcm for un-implanted samples to ∼10{sup −2} Ωcm for as-implanted ones are observed. The resistivity is further decreased to ∼10{sup −3} Ωcm by annealing. The origins of the low resistivity are attributed to both the zinc interstitial (Zn{sub i}) related defects and the electrical activated Ge donor. An activation energy of Ge donors estimated from the temperature dependence of carrier concentration is 102 meV. In PL studies, the new peak at 372 nm (3.33 eV) related to the Ge donor is observed in 1000 °C annealed samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Native defects in MBE-grown CdTe

Deep-level traps in both n- and p-type CdTe layers, grown by molecular-beam epitaxy on GaAs substrates, have been investigated by means of deep-level transient spectroscopy (DLTS). Four of the traps revealed in the DLTS spectra, which displayed exponential kinetics for capture of charge carriers into the trap states, have been assigned to native point defects: Cd interstitial, Cd vacancy, Te antisite defect and a complex formed of the Te antisite and Cd vacancy. Three further traps, displaying logarithmic capture kinetics, have been ascribed to electron states of treading dislocations generated at the mismatched interface with the substrate and propagated through the CdTe layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In-situ stress analysis with X-Ray diffraction for yield locus characterization of sheet metals

A main problem in the field of sheet metal characterization is the inhomogeneous plastic deformation in the gauge regions of specimens which causes the analytically calculated stresses to differ from the sought state of stress acting in the middle of the gauge region. To overcome this problem, application of X-Ray diffraction is analyzed. For that purpose a mobile X-ray diffractometer and an optical strain measurement system are mounted on a universal tensile testing machine. This enables the recording of the whole strain and stress history of a material point. The method is applied to uniaxial tension tests, plane strain tension tests and shear tests to characterize the interstitial free steel alloy DC06. The applicability of the concepts of stress factors is verified by uniaxial tension tests. The experimentally obtained values are compared with the theoretical values calculated with crystal elasticity models utilizing the orientation distribution functions (ODF). The relaxation problem is addressed which shows itself as drops in the stress values with the strain kept at a constant level. This drop is analyzed with elasto-viscoplastic material models to correct the measured stresses. Results show that the XRD is applicable to measure the stresses in sheet metals with preferred orientation. The obtained yield locus is expressed with the Yld2000–2D material model and an industry oriented workpiece is analyzed numerically. The comparison of the strain distribution on the workpiece verifies the identified material parameters.

36 MATERIALS SCIENCE↗

Giant g-factors of natural impurities in synthetic quartz

We report the observation of g-factors of natural paramagnetic impurities in a pure synthetic quartz crystal at milli-Kelvin temperatures. Measurements are made by performing spectroscopy using multiple high-Q whispering gallery modes sustained in the crystal. Extreme sensitivity of the method at low temperatures allows the determination of natural residual impurities introduced during the crystal growth. We observe g-factors that significantly differ from integer multiples of the electron g-factor in vacuum, and with values of up to 7.6, which reveals much stronger coupling between impurities and the crystal lattice than in previous studies. Both substitutional and interstitial ions are proposed as candidates for the observed interactions.

36 MATERIALS SCIENCE↗

Energetics of vacancy segregation to symmetric tilt grain boundaries in hexagonal closed pack materials

Molecular static simulations of 190 symmetric tilt grain boundaries in hexagonal closed pack metals were used to understand the energetics of vacancy segregation, which is important for designing stable interfaces in harsh environments. Simulation results show that the local arrangements of grain boundaries and the resulting structural units have a significant influence on the magnitude of vacancy binding energies, and the site-to-site variation within each boundary is substantial. Comparing the vacancy binding energies for each site in different c/a ratio materials shows that the binding energy increases significantly with an increase in c/a ratio. For example, in the [12{sup ¯}10] tilt axis, Ti and Zr with c/a = 1.5811 have a lower vacancy binding energy than the Mg with c/a = 1.6299. Furthermore, when the grain boundary energies of all 190 boundaries in all three elements are plotted against the vacancy binding energies of the same boundaries, a highly negative correlation (r = −0.7144) is revealed that has a linear fit with a proportionality constant of −25 Å{sup 2}. This is significant for applications where extreme environmental damage generates lattice defects and grain boundaries act as sinks for both vacancies and interstitial atoms.

36 MATERIALS SCIENCE↗

High-cycle fatigue behavior of Ti-5Al-2.5Sn ELI alloy forging at low temperatures

High-cycle fatigue properties of Ti-5Al-2.5Sn Extra Low Interstitial (ELI) alloy forging were investigated at low temperatures. The high-cycle fatigue strength at low temperatures of this alloy was relatively low compared with that at ambient temperature. The crystallographic orientation of a facet formed at a fatigue crack initiation site was determined by electron backscatter diffraction (EBSD) method in scanning electron microscope (SEM) to understand the fatigue crack initiation mechanism and discuss on the low fatigue strength at low temperature. Furthermore, in terms of the practical use of this alloy, the effect of the stress ratio (or mean stress) on the high-cycle fatigue properties was evaluated using the modified Goodman diagram.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of rapid thermal processing on copper precipitation in p/p{sup +} silicon epitaxial wafers with heavily boron-doped substrates

The effect of rapid thermal processing (RTP) on the formation of copper precipitation in p/p{sup +} silicon (Si) epitaxial wafers was systematically investigated by defect etching and optical microscopy. After RTP preannealing at high temperature (1250 °C/60 s, with cooling rate 30 K/s) followed by the 750 °C/8 h + 1050 °C/16 h low-high (L-H) two-step annealing, it was revealed that the bulk microdefects were found only inside the p{sup +} substrate, manifesting no defects generated in the epitaxial layer. However, it was found that the width of denude zone (DZ) in samples only subjected to L-H two-step annealing was narrower than that of epitaxial layer, which meant that oxygen precipitation was formed in epitaxial layer. It can be concluded that RTP was beneficial to the formation of DZ. Additionally, it was found that the width of DZ has a sharp dependence on the introducing temperature of copper contamination, that is, the corresponding equilibrium concentration of interstitial copper in the Si influence the thermodynamics and kinetics process of the formation of copper precipitation significantly.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rotational defects in cyclotrimethylene trinitramine (RDX) crystals

Cyclotrimethylene trinitramine (RDX) crystalizes in the orthorhombic α-phase at the ambient pressure and temperature. In principle, the point defects commonly found in monatomic crystals, such as vacancies and interstitials, may exist in RDX as well. However, in molecular crystals one encounters additional point defects associated with the distortion of the molecules. A set of rotational defects are described in this article. These are molecules which are located in the proper positions in the crystal but are rotated relative to the molecules in the perfect crystal, and their ring is slightly puckered. The energetic barriers for defect formation and for their annealing back to the perfect crystal configuration are computed using an atomistic model. It is shown that the formation energy of rotational defects is smaller than the vacancy formation energy. Such defects are identified in the cores of dislocations in RDX and hence their concentration in the crystal is expected to increase during plastic deformation. The importance of such point defects is related to their role in phonon scattering and in dislocation-mediated plastic deformation.

36 MATERIALS SCIENCE↗

Electronic structure of Al- and Ga-doped ZnO films studied by hard X-ray photoelectron spectroscopy

Al- and Ga-doped sputtered ZnO films (AZO, GZO) are semiconducting and metallic, respectively, despite the same electronic valence structure of the dopants. Using hard X-ray photoelectron spectroscopy we observe that both dopants induce a band in the electronic structure near the Fermi level, accompanied by a narrowing of the Zn 3d/O 2p gap in the valence band and, in the case of GZO, a substantial shift in the Zn 3d. Ga occupies substitutional sites, whereas Al dopants are in both substitutional and interstitial sites. The latter could induce O and Zn defects, which act as acceptors explaining the semiconducting character of AZO and the lack of variation in the optical gap. By contrast, mainly substitutional doping is consistent with the metallic-like behavior of GZO.

36 MATERIALS SCIENCE↗

Radiation damage characterization in reactor pressure vessel steels with nonlinear ultrasound

Nuclear generation currently accounts for roughly 20% of the US baseload power generation. Yet, many US nuclear plants are entering their first period of life extension and older plants are currently undergoing assessment of technical basis to operate beyond 60 years. This means that critical components, such as the reactor pressure vessel (RPV), will be exposed to higher levels of radiation than they were originally intended to withstand. Radiation damage in reactor pressure vessel steels causes microstructural changes such as vacancy clusters, precipitates, dislocations, and interstitial loops that leave the material in an embrittled state. The development of a nondestructive evaluation technique to characterize the effect of radiation exposure on the properties of the RPV would allow estimation of the remaining integrity of the RPV with time. Recent research has shown that nonlinear ultrasound is sensitive to radiation damage. The physical effect monitored by nonlinear ultrasonic techniques is the generation of higher harmonic frequencies in an initially monochromatic ultrasonic wave, arising from the interaction of the ultrasonic wave with microstructural features such as dislocations, precipitates, and their combinations. Current findings relating the measured acoustic nonlinearity parameter to increasing levels of neutron fluence for different representative RPV materials are presented.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Optical demagnetization in defect-mediated ferromagnetic ZnO:Cu films

Optical demagnetization effect has been observed in a defect-rich ZnO:Cu film. Phenomenally, UV illumination can effectively quench dual-donor oxygen vacancy (V{sub O}) and interstitial zinc (Zn{sub i}) mediated magnetic ordering (90% loss) with carrier recapture in ionized Zn{sub i} (Zn{sub i}{sup 2+} rather than Zn{sub i}{sup +}) traps. The involvement of carriers by means of metal Zn vapor annealing provides a bound carrier related magnetic scenario, stressing a more significant place of bound carrier rather than free carrier. Using light correlated electron spin resonance and magnetic measurements, the magnetic “on” and “off” state can be continuously manipulated via UV light, which is explained by the reversible process of [Cu{sub s}{sup +}/Cu{sub s}{sup 2+}] + Zn{sub i}{sup 2+} ↔ [Cu{sub s}{sup +}, h] + Zn{sub i}{sup +} (s and h denote the substitutional Cu ions on Zn sites in ZnO lattice and hole carrier, respectively). A slow charge-transfer process (∼15 μs) from Zn{sub i}{sup +} bound carriers to [Cu{sub s}{sup +}, h] states determines the unexpected optical demagnetization, well corresponding to control experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Controlling ferromagnetism of (In,Fe)As semiconductors by electron doping

Based on experimental results, using the Korringa-Kohn-Rostoker coherent potential approximation (KKR-CPA) method and Monte Carlo simulation, we study the mechanism of ferromagnetic behavior of (In,Fe)As. We show that with doped Be atoms occupying in interstitial sites, chemical pair interactions between atoms and magnetic exchange interactions between Fe atoms change due to electron concentration. Therefore, by controlling the doping process, magnetic behavior of (In,Fe)As is controlled and ferromagnetism is observed in this semiconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electroluminescence from ZnO/Si heterojunctions fabricated by PLD with bias voltage application

Electroluminescence (EL) for ZnO films has been investigated by fabricating n-ZnO/p-Si heterojunctions and changing the VI/II (O/Zn) ratio of the films. In the photoluminescence (PL) spectra, both the near band edge (NBE) emission and the defect-related emission were observed, while in the EL spectra only defect-related emission was observed. The EL spectra were divided into three components: green (550 nm), yellow (618 nm) and red (700 nm) bands; and their intensities were compared. As the VI/II (O/Zn) ratio was increased, the red band emission intensity decreased and the green band emission intensity increased. This implies that the oxygen and the zinc vacancies are related to the red and the green band emissions, respectively. Electron transitions from the conduction band minimum (Ec) to the deep energy levels of these vacancies are suggested to cause the red and the green luminescences while the energy levels of the Zn interstitials are close to the Ec in the band gap and no NBE emission is observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Confirmation of freely rotating H{sub 2} in ZnO

A Raman scattering study of H{sub 2} in ZnO which addresses the formation process, the thermal stability, the interaction with the phonon spectrum, the position in the host lattice, as well as the ortho-para conversion rates is presented. In particular, it is shown that the molecule is practically a free rotator stable up to 700 °C. Furthermore, an ortho-para conversion rate at 79 K was found to be 7.5 h, whereas the back conversion at room temperature occurs within less than 0.5 h. The interstitial site is suggested as the most likely position for the molecule in the ZnO lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Energetics and diffusion of gold in bismuth telluride-based thermoelectric compounds

We investigate experimentally and theoretically the long-term chemical and morphological stability of Au contacts on Bi{sub 2}Te{sub 3}-based materials. Electron microscopy and energy dispersive spectroscopy experiments show that thermal annealing severely degrades the integrity of micron-thick Au films on n-type Bi{sub 2}Te{sub 3}, eventually leading to their complete dissolution. To explain this result, we have used density functional theory to calculate defect formation energies and diffusion barriers of Au within Bi{sub 2}Te{sub 3}. We identify an interstitial binding site consistent with previous reports of (rapid) anisotropic diffusion of Au in Bi{sub 2}Te{sub 3}. We find, however, that substitutional Au has lower formation energies. We suggest that these substitutional defects may be active in our experiments and account for the relatively long time scale of the contact degradation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗