Search NASA⌕ Search

SEARCH · Search NASA

Results for “Loss function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Modeling the Contribution of Precipitation Loss to a Radiation Belt Electron Dropout Observed by Van Allen Probes

A drift-diffusion model is used to simulate the low-altitude electron distribution, accounting for azimuthal drift, pitch angle diffusion, and atmospheric backscattering effects during a rapid electron dropout event on 21st August 2013, at L = 4.5. Additional external loss effects are introduced during times when the low-altitude electron distribution cannot be reproduced by diffusion alone. Here, the model utilizes low-altitude electron count rate data from five POES/MetOp satellites to quantify pitch angle diffusion rates. Low-altitude data provides critical constraint on the model because it includes the drift loss cone region where the electron distribution in longitude is highly dependent on the balance between azimuthal drift and pitch angle diffusion. Furthermore, a newly derived angular response function for the detectors onboard POES/MetOp is employed to accurately incorporate the bounce loss cone measurements, which have been previously contaminated by electrons from outside the nominal field-of-view. While constrained by low-altitude data, the model also shows reasonable agreement with high-altitude data. Pitch angle diffusion rates during the event are quantified and are faster at lower energies. Precipitation is determined to account for all of the total loss observed for 450 keV electrons, 88% for 600 keV and 38% for 900 keV. Predictions made in the MeV range are deemed unreliable as the integral energy channels E3 and P6 fail to provide the necessary constraint at relativistic energies.

79 ASTRONOMY AND ASTROPHYSICS↗

Large-scale Manufacturing of Nanoparticulate-based Lubrication Additives for Improved Energy Efficiency and Reduced Emissions

This project was funded under the Department of Energy (DOE) Lab Call on Nanomanufacturing for Energy Efficiency and was directed toward the development of novel boron-based nanocolloidal lubrication additives for improving the friction and wear performance of machine components in a wide range of industrial and transportation applications. Argonne's research team concentrated on the scientific and technical aspects of the project, using a range of state-of-the art analytical and tribological test facilities. Argonne has extensive past experience and expertise in working with boron-based solid and liquid lubrication additives, and has intellectual property ownership of several. There were two industrial collaborators in this project: Ashland Oil (represented by its Valvoline subsidiary) and Primet Precision Materials, Inc. (a leading nanomaterials company). There was also a sub-contract with the University of Arkansas. The major objectives of the project were to develop novel boron-based nanocolloidal lubrication additives and to optimize and verify their performance under boundary-lubricated sliding conditions. The project also tackled problems related to colloidal dispersion, larger-scale manufacturing and blending of nano-additives with base carrier oils. Other important issues dealt with in the project were determination of the optimum size and concentration of the particles and compatibility with various base fluids and/or additives. Boron-based particulate additives considered in this project included boric acid (H 3 BO 3 ), hexagonal boron nitride (h-BN), boron oxide, and borax. As part of this project, we also explored a hybrid MoS 2 + boric acid formulation approach for more effective lubrication and reported the results. The major motivation behind this work was to reduce energy losses related to friction and wear in a wide spectrum of mechanical systems and thereby reduce our dependence on imported oil. Growing concern over greenhouse gas emissions was also a major reason. The transportation sector alone consumes about 13 million barrels of crude oil per day (nearly 60% of which is imported) and is responsible for about 30% of the CO 2 emission. When we consider manufacturing and other energy-intensive industrial processes, the amount of petroleum being consumed due to friction and wear reaches more than 20 million barrels per day (from official energy statistics, U.S. Energy Information Administration). Frequent remanufacturing and/or replacement of worn parts due to friction-, wear-, and scuffing-related degradations also consume significant amounts of energy and give rise to additional CO 2 emission. Overall, the total annual cost of friction- and wear-related energy and material losses is estimated to be rather significant (i.e., as much as 5% of the gross national products of highly industrialized nations). It is projected that more than half of the total friction- and wear-related energy losses can be recovered by developing and implementing advanced friction and wear control technologies. In transportation vehicles alone, 10% to 15% of the fuel energy is spent to overcome friction. If we can cut down the friction- and wear-related energy losses by half, then we can potentially save up to 1.5 million barrels of petroleum per day. Also, less friction and wear would mean less energy consumption as well as less carbon emissions and hazardous byproducts being generated and released to the environment. New and more robust anti-friction and -wear control technologies may thus have a significant positive impact on improving the efficiency and environmental cleanliness of the current legacy fleet and future transportation systems. Effective control of friction in other industrial sectors such as manufacturing, power generation, mining and oil exploration, and agricultural and earthmoving machinery may bring more energy savings. Therefore, this project was timely and responsive to the energy and environmental objectives of DOE and our nation. In this project, most of the boron-based materials with known and potential anti-friction and -wear properties have been manufactured as colloidal additives and tested for their effectiveness in controlling friction and wear. Unlike other anti-friction and -wear additives, which consist of zinc, molybdenum, sulfur, phosphorus, and even chlorine, lubricious boron compounds considered in this project are made of boron, oxygen, nitrogen, and hydrogen, which are more environmentally benign. Among others, boric acid is a natural mineral (known in mineralogy as "sassolite"). Based on our earlier exploratory research, it was found to offer the best overall prospect in terms of performance improvements, environmental friendliness, and ease of manufacturing and, hence, cost effectiveness. Hexagonal boron nitride and borax also offered good prospects for improving the tribological properties of lubricated sliding surfaces. Boron oxide particles were found to be rather hard and somewhat abrasive and, hence, were not considered beyond the initial screening studies. In our bench-top tribological evaluation, we also demonstrated that those additives which worked well with engine oils could work equally well with very common gear oils. When added at appropriate concentrations, such gear oils were found to provide significant resistance to micropitting and scuffing failures in bench-top tribological test systems. Their traction coefficients were also reduced substantially and their scuffing limits were improved considerably. Such impressive tribological behavior of boron-based additives may have been due to their high chemical affinities to interact with sliding contact surfaces and to form slick and protective boundary films. Indeed, our surface studies have confirmed that most of the boron-based nanoparticulate additives prepared in our project possess a strong tendency to form a boron-rich boundary film on sliding contact surfaces. It is believed that the formation of such slick and highly durable boundary films is perhaps one of the fundamental reasons for their superior anti-friction, -wear, and -scuffing performance. Boron-based additives developed under this project have shown potential to reduce or replace the uses of environmentally unsafe sulfur- and phosphorus-bearing anti-wear and friction additives, such as zinc dialkyl dithiophosphate (ZDDP) and molybdenum dialkyl dithiocarbamate (MoDTC), in current lubricating oils. Because ZDDP and MoDTC were suspected of adversely impacting the performance of after-treatment catalysts in current engines, the Environmental Protection Agency (EPA) and other regulatory agencies are demanding that the concentrations of these catalysts in current oils be curtailed drastically. The boron-based nano-additives developed in this project may help reduce the use of ZDDP and MoDTC additives and, hence, help ease the poisoning effects on after-treatment catalysts. When used as lubricity additives, these boron additives can chemically interact with sliding or contacting surfaces and form a protective and slick boundary film, which can, in turn, help reduce friction and wear and increase resistance to scuffing. In the cases of traditional anti-friction and -wear additives mentioned, such protective boundary films result from phosphorus, sulfur, and other elements in the additive package, and again they have been under increased scrutiny in recent years, mainly because of their adverse effects on after-treatment devices. Overall, the boron-based nano-additive technology of this project was shown to hold promise for a broad range of industrial and transportation applications where lower friction and higher resistance to wear and scuffing are needed. Due to more stringent operating conditions of modern machinery, rolling, rotating, and sliding components have been failing to meet the projected lifetimes, mainly because of failures related to mechanical wear, corrosion, and scuffing. The novel boron-based additive technology developed under this project may help such machine components to function reliably by cutting down the friction and wear losses and by increasing resistance to scuffing.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Neuregulin-4 is an angiogenic factor that is critically involved in the maintenance of adipose tissue vasculature

Highlights: • Nrg4 is highly expressed in healthy adipocytes and down-regulated in obesity. • Nrg4 is an angiogenic growth factor. • Loss of Nrg4 caused reduction in adipose tissue blood vessels in mice. • Loss of Nrg4 caused overweight due to reduced energy expenditure in mice. • Loss of Nrg4 impaired metabolic health in mice even while consuming normal chow. Adipose tissue (AT) contains well-developed vascular networks. Pathological AT expansion often accompany the reduction in AT blood vessels, which further exacerbates adipocyte dysfunction due to hypoxia; however, it remains unclear whether AT vascular rarefaction is simply secondary to adipocyte hypertrophy, or if there is an actively regulated pathway that mediates impaired AT angiogenesis in obesity. We searched for growth factors whose expression in AT is down-regulated in obesity; accordingly, we identified neuregulin-4 (Nrg4), a member of the EGF family of proteins. Nrg4 is highly and preferentially expressed in healthy adipocytes, while its expression was substantially reduced in obesity. Nrg4 activated endothelial angiogenic functions and angiogenesis both in vitro and in vivo. Genetic loss of Nrg4 caused reduction in brown and white AT blood vessels, and induced overweight even while consuming normal chow. Conditional knockout of Nrg4 in brown adipocytes caused blood vessel reduction in brown but not in white AT, and was sufficient to induce obese phenotype. Our data demonstrated that Nrg4 plays a critical role in maintaining AT vasculature and its metabolic functions. Considering the substantial reduction of Nrg4 in obesity, disruption of Nrg4-mediated angiogenesis could be an active mechanism for the obesity-associated vascular rarefaction in AT, and thus Nrg4 is an attracting pharmacotherapeutic target in the prevention and/or treatment of obesity-related metabolic disorders.

60 APPLIED LIFE SCIENCES↗

Probing jet splitting and energy loss via groomed jets in relativistic heavy-ion collisions

The nuclear modification of groomed jet splitting in relativistic heavy-ion collisions at RHIC and the LHC is studied based on higher twist jet energy loss formalism. Assuming coherent energy loss for two subjets, we find a non-monotonic dependence on jet energy for the nuclear modification of jet splitting function, which provides a good description of CMS and STAR groomed jet measurements. In contrast, the assumption of independent energy loss for two subjets cannot explain the observed nuclear modification pattern for groomed jet splitting.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Formation and Dissociation of Phosphorylated Peptide Radical Cations

In this study, we generated phosphoserine- and phosphothreonine-containing peptide radical cations through low-energy collision-induced dissociation (CID) of the ternary metal–ligand phosphorylated peptide complexes [Cu II (terpy) p M] ·2+ and [Co III (salen) p M] ·+ [ p M: phosphorylated angiotensin III derivative; terpy: 2,2':6',2''-terpyridine; salen: N,N '-ethylenebis(salicylideneiminato)]. Subsequent CID of the phosphorylated peptide radical cations ( p M ·+ ) revealed fascinating gas-phase radical chemistry, yielding (1) charge-directed b- and y-type product ions, (2) radical-driven product ions through cleavages of peptide backbones and side chains, and (3) different degrees of formation of [M – H 3 PO 4 ] ·+ species through phosphate ester bond cleavage. The CID spectra of the p M ·+ species and their non-phosphorylated analogues featured fragment ions of similar sequence, suggesting that the phosphoryl group did not play a significant role in the fragmentation of the peptide backbone or side chain. The extent of neutral H 3 PO 4 loss was influenced by the peptide sequence and the initial sites of the charge and radical. A preliminary density functional theory study, at the B3LYP 6-311++G(d,p) level of theory, of the neutral loss of H 3 PO 4 from a prototypical model—N-acetylphosphorylserine methylamide—revealed several factors governing the elimination of neutral phosphoryl groups through charge- and radical-induced mechanisms.

59 BASIC BIOLOGICAL SCIENCES↗

Oxidative Stress and Autophagy Responses of Osteocytes Exposed to Spaceflight-like Radiation.

Weightlessness and radiation, two of the unique elements of the space environment, causes a profound decrement in bone mass that mimics aging. This bone loss is thought to result from increased activity of bone-resorbing osteoclasts and functional changes in bone-forming osteoblasts, cells that give rise to mature osteocytes. Our current understanding of the signaling factors and mechanisms underlying bone loss is incomplete. However, it is known that oxidative stress, characterized by the excess production of free radicals, is elevated during radiation exposure. The goals of this study is to examine the response of osteocytes to spaceflight-like radiation and to identify signaling processes that may be targeted to mitigate bone loss in scenarios of space exploration, earth-based radiotherapy and accidental radiation exposure. We hypothesize that (1) oxidative stress, as induced by radiation, decreases osteocyte survival and increases pro-osteoclastogenic signals and that (2) autophagy is one of the key cellular defenses against oxidative stress. Autophagy is the process by which cellular components including organelles and proteins are broken down and recycled. To test our hypothesis, we exposed the osteocyte-like cell line, MLO-Y4, to 0.5, 1, and 2 Gy of simulated space radiation (Iron-56 radiation at 600 MeV/n) and assessed cell numbers, cell growth-associated molecules as well as markers of autophagy and oxidative stress at various time points post-irradiation. We observed a reduction in cell numbers in the groups exposed to 1 and 2 Gy of Iron-56 radiation. Collectively, flow cytometry and gene expression analysis revealed that radiation caused a shift in cell cycle distribution consistent with growth arrest. Compared to sham-treatment, 2 Gy of Iron-56 increased FoxO3, SOD1, and RANKL gene expression yet unexpectedly decreased LC3B-II protein levels at 4 and 24 hours post-IR. Taken together, these findings suggest that simulated space radiation invoke antioxidant, pro-osteoclastogenic, and growth arrest responses in osteocytes. The implications of reduced autophagy flux at the time points examined remain to be elucidated.

Biological Sciences↗

Tailoring the Near-Surface Environment of Rh Single-Atom Catalysts for Selective CO 2 Hydrogenation

For this study, we used a combination of experimental spectroscopies, density functional theory calculations, and CO 2 hydrogenation studies to investigate the effects of modifying single-atom Rh 1 /TiO 2 catalysts with functionalized phosphonic acid monolayers. We found that the deposition of specific amine-functionalized ligands resulted in an ~8× increase in site-specific CO 2 reduction turnover frequency at 150 °C and a ~2× increase at 250 °C. On-stream stability also improved following ligand deposition. The effect of the modifier on reactivity was highly sensitive to the proximity of the amine functional group to the surface, which was controlled by adjusting the length of the phosphonic acid tail. Furthermore, deposition of alkyl phosphonic acids without an amine functional group resulted in blocked CO 2 adsorption and a near-complete loss of catalytic activity. Infrared spectroscopy studies suggested that the amine group provided binding sites for CO 2 that enabled hydrogenation when the amine was positioned near a Rh1 site. Phosphonic acid-modified catalysts also exhibited high selectivity to CO over the series product methane; the selectivity effect was traced to modification of the Rh1 sites to favor CO desorption. Phosphonic acid deposition resulted in 80–90% loss of accessible Rh1 sites, likely due to blocking by tail groups. However, even with the loss of sites, under low-temperature reaction conditions, the rates of CO 2 hydrogenation were improved with the coatings, indicating that the remaining sites are highly efficient. Organic functionalization of the supports for atomically dispersed catalysts offers the opportunity to precisely control the positioning of functional groups in the vicinity of a well-defined active site, potentially enabling an additional level of control over active site design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Complex permittivity measurements of lunar samples at microwave and millimeter wavelengths

The relative dielectric constant and loss tangent of lunar sample 14163,164 (fine dust) were determined as a function of density at 9.375, 24, 35, and 60 GHz. In addition, such measurements have also been performed on lunar sample 14310,74 (solid rock) at 9.375 GHz. The loss tangent was found to be frequency independent at these test frequencies and had a value of 0.015 for the lunar dust sample.

Bassett, H. L.↗

Probing optical band gaps at the nanoscale in NiFe₂O₄ and CoFe₂O₄ epitaxial films by high resolution electron energy loss spectroscopy

Nanoscale optical band gap variations in epitaxial thin films of two different spinel ferrites, i.e., NiFe₂O₄ (NFO) and CoFe₂O₄ (CFO), have been investigated by spatially resolved high resolution electron energy loss spectroscopy. Experimentally, both NFO and CFO show indirect/direct band gaps around 1.52 eV/2.74 and 2.3 eV, and 1.3 eV/2.31 eV, respectively, for the ideal inverse spinel configuration with considerable standard deviation in the band gap values for CFO due to various levels of deviation from the ideal inverse spinel structure. Direct probing of the regions in both the systems with tetrahedral A site cation vacancy, which is distinct from the ideal inverse spinel configuration, shows significantly smaller band gap values. The experimental results are supported by the density functional theory based modified Becke-Johnson exchange correlation potential calculated band gap values for the different cation configurations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exploring variation in phyllosphere microbial communities across four hemlock species

Abstract The hemlock woolly adelgid (HWA) is an insect native to Asia and likely western North America. First reported in eastern North America in 1951, it has devastated eastern hemlock ( Tsuga canadensis ) populations. Loss of hemlock will greatly affect the structure and function of eastern forests. Susceptibility to adelgid infestation varies within eastern hemlocks and across other hemlock species. Our study was conducted to determine whether eastern hemlocks share a similar stem (phyllosphere) microbial community with other co‐occurring hemlocks and whether community‐level shifts are associated within trees of the same species based on HWA infestation. Surprisingly, we found no difference in microbial community composition or diversity between trees of the same species based on the level of HWA infestation. However, microbial communities varied significantly across the four hemlock trees sampled, native T. canadensis and three non‐natives: Tsuga chinensis , Tsuga dumosa , and Tsuga sieboldii . Within these tree hosts, microbial communities from T. dumosa and T. chinensis clustered together, and microbial communities from T. canadensis and T. sieboldii clustered separately from all other tree species. Additionally, specific indicator taxa were identified for all the tree species sampled. These results indicate that Asian hemlocks might not fill the same niche in eastern forests as the native eastern hemlock. Further work should be conducted to determine how differences in hemlock species and associated microbial communities might scale up to alter organismal interactions involving hemlocks.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of Operating Conditions on Cryogenic Carbon Dioxide Removal

In this investigation, a natural-gas (NG) treatment system for NG sources with high CO 2 content is simulated experimentally and theoretically using Aspen Plus. The concept uses patented heat exchangers and a process design developed as part of the cryogenic carbon capture(CCC) process to remove enough CO 2 to enable the treated gas to be handled without the modification of traditional NG equipment. Simultaneously, the process removes liquefied natural gas (LNG) very efficiently. This process provides a simpler alternative to the solvent-based CO 2 removal, absorbent drying, and cryogenic NG liquid extraction systems found in traditional NG processing. The data from an experimental bench-scale apparatus verify the results of the simulations as a function of NG composition and pressure. Costing parameters, exergy loss, and heat-exchanger efficiency are also discussed. The results confirm low exergy losses for bench-scale apparatus. The system uses heat exchangers with efficiencies of more than 90 %. High pressure and low methane content in the NG result in high CO 2 capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of Polyhydroxybutyrate (PHB) Produced by Novel Bacterium Lysinibacillus sphaericus BBKGBS6 Isolated From Soil

The aim of the study was to characterization of polyhydroxybutyrate (PHB) produced by novel bacterium Lysinibacillus sphaericus BBKGBS6 isolated from soil. The present study reports that the strain L. sphaericus BBKGBS6, which was isolated from agricultural soil and is capable of producing PHB. Extraction of PHB was done by solvent extraction method. The results indicated the presence of crotonic acid and confirmed the presence of polyhydroxybutyrate in the sample. The FTIR spectra were observed characteristic absorption bonds for ester and the presence of C=O and C–O were obtained. GCMS results showed the major molecular fragmentation were, 117 m/z (C{sub 5}H{sub 9}O{sub 3}{sup +}), 104 m/z (C{sub 4}H{sub 7}O{sub 3}{sup +}), 74 m/z (C{sub 3}H{sub 6}O{sub 2}{sup +}), 61 m/z (C{sub 2}H{sub 3}O{sub 2}{sup +}), 43 m/z (C{sub 2}H{sub 3}O), 59 m/z (C{sub 2}H{sub 3}O). {sup 1}H and {sup 13}C NMR spectra were recorded using purified samples. The molecular weight of PHB (5.64 × 10{sup 5)} was estimated based on viscosity measurement. Films were prepared by the solvent casting method. The structure of crystalline polymers can be determined or refined through best fitting of X-ray powder diffraction profiles. The procedures provide results grossly in agreement with respect to the confirmation of the chain in the powder but differing significantly on a more detailed scale. Such differences represent an additional reason of interest in performing a new structural study. Differential scanning calorimetric experiments was performed using Universal V4.5A TA Instruments, (m.p. 156.61 °C; ΔH = 28.54 J/g) USIC Dharwad. The crystallinity (X{sub c}) of PHB is calculated as per equation given below X{sub c} = DH{sub f}×100/DH{sub 0}×W. The PHB extracted, PHB Sigma and PHB–TS showed two endothermal peaks in between 140 and 200 °C. The enthalpy of melting (ΔHf) was 28.09 J/g for standard PHB and for extracted one is 56.42 J/g. The glass transition temperature of the sample was 140 °C and amorphous temperature was 176.08 °C. Thermo gravimetric analysis (TGA) is a method of thermal analysis in which changes in physical and chemical properties of materials are measured as a function of increasing temperature (with constant heating rate), or as a function of time (with constant temperature and/or constant mass loss). The decomposition temperature at a 10% level determined by TGA for pure PHB in ScCO{sub 2} at 70 °C and 22 MPa was 293.32 °C. Tensile strength of PHB film (28.23 Mpa) was carried out according to ASTMD 882 using universal testing machine (Model Lx 5, LYOD ISNT). Water vapor transmission rate of PHB film (29 g/m{sup 2}/day) was measured as per ASTM E96-95 and carried out according to the desiccant method. Oxygen transmission rate of PHB film 472.36 (cc/m{sup 2}/day/atm 65% Rh and 27 °C) was measured as per the method of ASTM D-1434-66.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Mutation in fission yeast phosphatidylinositol 4-kinase Pik1 is synthetically lethal with defect in telomere protection protein Pot1

Highlights: • A novel phosphatidylinositol 4-kinase pik1 mutant, named as pik1-1 was obtained. • Phosphoinositol 4-phosphate in the Golgi was reduced in pik1-1. • pik1-1 is synthetically lethal with pot1 deletion. • pik1-1 mutation does not affect telomere resection and chromosome circularization. • pik1{sup +} is suggested to be required for the maintenance of circular chromosomes. Fission yeast Pik1p is one of three phosphatidylinositol 4-kinases associated with the Golgi complex, but its function is not fully understood. Deletion of pot1{sup +} causes telomere degradation and chromosome circularization. We searched for the gene which becomes synthetically lethal with pot1Δ. We obtained a novel pik1 mutant, pik1-1, which is synthetically lethal with pot1Δ. We found phosphoinositol 4-phosphate in the Golgi was reduced in pik1-1. To investigate the mechanism of the lethality of the pot1Δ pik1-1 double mutant, we constructed the nmt-pot1-aid pik1-1 strain, where Pot1 function becomes low by drugs, which leads to telomere loss and chromosome circularization, and found pik1-1 mutation does not affect telomere resection and chromosome circularization. Thus, our results suggest that pik1{sup +} is required for the maintenance of circular chromosomes.

60 APPLIED LIFE SCIENCES↗

Oncogenic DIRAS3 promotes malignant phenotypes of glioma by activating EGFR-AKT signaling

Highlights: • DIRAS3 is up-regulated in gliomas, especially in Classical and Mesenchymal subtype GBMs. • DIRAS3 promotes proliferation and invasion of glioma cells. • DIRAS3 enhances EGFR-AKT signaling activation at the downstream of EGFR through increasing AKT phosphorylation. Epidermal growth factor receptor (EGFR)-Akt signaling cascade activation plays a pivotal role in gliomas malignant phenotype, especially in Classical and Mesenchymal subtype gliomas. However, the molecules and mechanisms underlying regulate and maintain the activation of EGFR-AKT signaling remains unclear. Previously reports showed that DIRAS3 inhibits cell proliferation and induces autophagy in ovarian, breast, lung and prostate cancers, which is heterozygosity loss or down-regulated in aforementioned cancers and functionally as a tumor suppressor, whereas the role of DIRAS3 in glioma is still veiled. Here, in this study, we investigated the biological function and role of DIRAS3 in gliomas, and found that DIRAS3 is up-regulated in gliomas and is positively correlated with poor prognosis of glioma patients, meanwhile, over-expressed DIRAS3 promotes glioma cells proliferation and invasion. Further mechanistic study showed that the expression level of DIRAS3 in Classical and Mesenchymal subtype GBMs is higher, and over-expression of DIRAS3 promotes EGFR-AKT signaling activation at the downstream of EGFR and increases AKT phosphorylation, meanwhile suppression of AKT by MK-2206 reverses the tumor promoting function of DIRAS3. Taken together, these findings reveal a novel oncogenic role of DIRAS3 in the development and progression of glioma, which suggest that DIRAS3 could serve as a potential diagnostic marker and a promising therapeutic target of gliomas.

60 APPLIED LIFE SCIENCES↗

Fibroblast Growth Factor-Peptide Improves Barrier Function and Proliferation in Human Keratinocytes After Radiation

Purpose: Epidermal keratinocytes, which can be severely damaged after ionizing radiation (IR), are rapid turnover cells that function as a barrier, protecting the host from pathogenic invasion and fluid loss. We tested fibroblast growth factor-peptide (FGF-P), a small peptide derived from the receptor-binding domain of FGF-2, as a potential mitigator of radiation effects via proliferation and the barrier function of keratinocytes. Methods and Materials: Keratinocytes isolated from neonatal foreskin were grown on transwells. After being exposed to 0, 5, or 10 Gy IR, the cells were treated with a vehicle or FGF-P. The permeability of IR cells was assessed by using transepithelial electrical resistance (TEER) and a paracellular tracer flux of fluorescein isothiocyanate-conjugated bovine serum albumin (FITC-BSA) with Ussing chambers. The cell proliferation was measured with yellow tetrazolium salt (MTT) and tritiated thymidine ([{sup 3}H]-TdR) assays. The phosphorylation of extracellular signal-regulated kinases (ERK) was measured in an enzyme-linked immunosorbent (ELISA)-like assay, and the proteins related to tight junctions (TJ) and adherens junctions (AJ) were examined with Western blotting. We used a mouse model to assess the ability of FGF-P to promote the healing of skin {beta} burns created with a strontium applicator. Results: We found (1) FGF-P reduced the permeability of irradiated keratinocytes, as evidenced by increased TEER and decreased diffusion of FITC-BSA, both associated with the regulation of different proteins and levels of TJ and AJ; and (2) FGF-P enhanced the proliferation of irradiated keratinocytes, as evidenced by increased MTT activity and [{sup 3}H]-TdR incorporation, which was associated with activation of the ERK pathway; and (3) FGF-P promoted the healing of skin {beta} burns. Conclusions: FGF-P enhances the barrier function, including up-regulation of TJ proteins, increases proliferation of human keratinocytes, and accelerates the healing of skin {beta} burns. FGF-P is a promising mitigator that improves the proliferation and barrier function of keratinocytes after IR.

60 APPLIED LIFE SCIENCES↗

Enteral Feeding Tubes in Patients Undergoing Definitive Chemoradiation Therapy for Head-and-Neck Cancer: A Critical Review

Definitive chemoradiation therapy has evolved as the preferred organ preservation strategy in the treatment of locally advanced head-and-neck cancer (LA-HNC). Dry mouth and dysphagia are among the most common and most debilitating treatment-related toxicities that frequently necessitate the placement of enteral feeding tubes (FT) in these patients to help them meet their nutritional requirements. The use of either a percutaneous endoscopic gastrostomy tube or a nasogastric tube, the choice of using a prophylactic vs a reactive approach, and the effects of FTs on weight loss, hospitalization, quality of life, and long-term functional outcomes are areas of continued controversy. Considerable variations in practice patterns exist in the United States and abroad. This critical review synthesizes the current data for the use of enteral FTs in this patient population and clarifies the relative advantages of different types of FTs and the timing of their use. Recent developments in the biologic understanding and treatment approaches for LA-HNC appear to be favorably impacting the frequency and severity of treatment-related dysphagia and may reduce the need for enteral tube feeding in the future.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Comparative analysis for various redox flow batteries chemistries using a cost performance model

A robust performance-based cost model is developed for all-vanadium, iron-vanadium and iron chromium redox flow batteries. Systems aspects such as shunt current losses, pumping losses and thermal management are accounted for. The objective function, set to minimize system cost, allows determination of stack design and operating parameters such as current density, flow rate and depth of discharge (DOD). Component costs obtained from vendors are used to calculate system costs for various time frames. A 2 kW stack data was used to estimate unit energy costs and compared with model estimates for the same size electrodes. The tool has been shared with the redox flow battery community to both validate their stack data and guide future direction.

electrolyte↗